qed: RoCE EDPM to honor PFC

Configure device according to DCBx results so that EDPMs
made by RoCE would honor flow-control.
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_dcbx.c

@@ -896,6 +896,22 @@ qed_dcbx_mib_update_event(struct qed_hwfn *p_hwfn,
 	}
 
 	qed_dcbx_get_params(p_hwfn, &p_hwfn->p_dcbx_info->get, type);
+
+	if (type == QED_DCBX_OPERATIONAL_MIB) {
+		struct qed_dcbx_results *p_data;
+		u16 val;
+
+		/* Configure in NIG which protocols support EDPM and should
+		 * honor PFC.
+		 */
+		p_data = &p_hwfn->p_dcbx_info->results;
+		val = (0x1 << p_data->arr[DCBX_PROTOCOL_ROCE].tc) |
+		      (0x1 << p_data->arr[DCBX_PROTOCOL_ROCE_V2].tc);
+		val <<= NIG_REG_TX_EDPM_CTRL_TX_EDPM_TC_EN_SHIFT;
+		val |= NIG_REG_TX_EDPM_CTRL_TX_EDPM_EN;
+		qed_wr(p_hwfn, p_ptt, NIG_REG_TX_EDPM_CTRL, val);
+	}
+
 	qed_dcbx_aen(p_hwfn, type);
 
 	return rc;

drivers/net/ethernet/qlogic/qed/qed_reg_addr.h

@@ -1564,6 +1564,12 @@
 #define NIG_REG_TSGEN_FREECNT_UPDATE_K2 0x509008UL
 #define CNIG_REG_NIG_PORT0_CONF_K2 0x218200UL
 
+#define NIG_REG_TX_EDPM_CTRL 0x501f0cUL
+#define NIG_REG_TX_EDPM_CTRL_TX_EDPM_EN (0x1 << 0)
+#define NIG_REG_TX_EDPM_CTRL_TX_EDPM_EN_SHIFT 0
+#define NIG_REG_TX_EDPM_CTRL_TX_EDPM_TC_EN (0xff << 1)
+#define NIG_REG_TX_EDPM_CTRL_TX_EDPM_TC_EN_SHIFT 1
+
 #define PRS_REG_SEARCH_GFT 0x1f11bcUL
 #define PRS_REG_CM_HDR_GFT 0x1f11c8UL
 #define PRS_REG_GFT_CAM 0x1f1100UL