isci: Move transport layer registers from port to phy

At init and RNC resume we need to touch every phy in a port to be sure
we have initialized STP properties in the case where port_index !=
phy_index.  Also add some missing __iomem annotations.
Signed-off-by: NHenryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/core/scic_sds_controller.c

@@ -2919,6 +2919,7 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(
 		     index++) {
 			result = scic_sds_phy_initialize(
 				&this_controller->phy_table[index],
+				&this_controller->scu_registers->peg0.pe[index].tl,
 				&this_controller->scu_registers->peg0.pe[index].ll
 				);
 		}
@@ -2932,7 +2933,6 @@ static enum sci_status scic_sds_controller_reset_state_initialize_handler(
 		     index++) {
 			result = scic_sds_port_initialize(
 				&this_controller->port_table[index],
-				&this_controller->scu_registers->peg0.pe[index].tl,
 				&this_controller->scu_registers->peg0.ptsg.port[index],
 				&this_controller->scu_registers->peg0.ptsg.protocol_engine,
 				&this_controller->scu_registers->peg0.viit[index]

drivers/scsi/isci/core/scic_sds_phy.c

@@ -62,6 +62,7 @@
 #include "scic_sds_phy.h"
 #include "scic_sds_phy_registers.h"
 #include "scic_sds_port.h"
+#include "scic_sds_remote_node_context.h"
 #include "scic_user_callback.h"
 #include "sci_environment.h"
 #include "sci_util.h"
@@ -83,6 +84,31 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy)
  * * SCIC SDS PHY Internal Methods
  * ***************************************************************************** */
 
+/**
+ * This method will initialize the phy transport layer registers
+ * @this_phy:
+ * @transport_layer_registers
+ *
+ * enum sci_status
+ */
+static enum sci_status scic_sds_phy_transport_layer_initialization(
+	struct scic_sds_phy *this_phy,
+	struct scu_transport_layer_registers __iomem *transport_layer_registers)
+{
+	u32 tl_control;
+
+	this_phy->transport_layer_registers = transport_layer_registers;
+
+	SCU_STPTLDARNI_WRITE(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
+
+	/* Hardware team recommends that we enable the STP prefetch for all transports */
+	tl_control = SCU_TLCR_READ(this_phy);
+	tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
+	SCU_TLCR_WRITE(this_phy, tl_control);
+
+	return SCI_SUCCESS;
+}
+
 /**
  * This method will initialize the phy link layer registers
  * @this_phy:
@@ -92,7 +118,7 @@ enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy)
  */
 static enum sci_status scic_sds_phy_link_layer_initialization(
 	struct scic_sds_phy *this_phy,
-	struct scu_link_layer_registers *link_layer_registers)
+	struct scu_link_layer_registers __iomem *link_layer_registers)
 {
 	u32 phy_configuration;
 	struct sas_capabilities phy_capabilities;
@@ -361,7 +387,8 @@ void scic_sds_phy_set_port(
  */
 enum sci_status scic_sds_phy_initialize(
 	struct scic_sds_phy *sci_phy,
-	struct scu_link_layer_registers *link_layer_registers)
+	struct scu_transport_layer_registers __iomem *transport_layer_registers,
+	struct scu_link_layer_registers __iomem *link_layer_registers)
 {
 	/* Create the SIGNATURE FIS Timeout timer for this phy */
 	sci_phy->sata_timeout_timer = scic_cb_timer_create(
@@ -370,6 +397,9 @@ enum sci_status scic_sds_phy_initialize(
 		sci_phy
 		);
 
+	/* Perfrom the initialization of the TL hardware */
+	scic_sds_phy_transport_layer_initialization(sci_phy, transport_layer_registers);
+
 	/* Perofrm the initialization of the PE hardware */
 	scic_sds_phy_link_layer_initialization(sci_phy, link_layer_registers);
 
@@ -384,6 +414,31 @@ enum sci_status scic_sds_phy_initialize(
 	return SCI_SUCCESS;
 }
 
+/**
+ * This method assigns the direct attached device ID for this phy.
+ *
+ * @this_phy The phy for which the direct attached device id is to
+ *       be assigned.
+ * @device_id The direct attached device ID to assign to the phy.
+ *       This will either be the RNi for the device or an invalid RNi if there
+ *       is no current device assigned to the phy.
+ */
+void scic_sds_phy_setup_transport(
+	struct scic_sds_phy *this_phy,
+	u32 device_id)
+{
+	u32 tl_control;
+
+	SCU_STPTLDARNI_WRITE(this_phy, device_id);
+
+	/*
+	 * The read should guarantee that the first write gets posted
+	 * before the next write
+	 */
+	tl_control = SCU_TLCR_READ(this_phy);
+	tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
+	SCU_TLCR_WRITE(this_phy, tl_control);
+}
 
 /**
  *
@@ -398,10 +453,9 @@ void scic_sds_phy_suspend(
 	u32 scu_sas_pcfg_value;
 
 	scu_sas_pcfg_value = SCU_SAS_PCFG_READ(this_phy);
-
 	scu_sas_pcfg_value |= SCU_SAS_PCFG_GEN_BIT(SUSPEND_PROTOCOL_ENGINE);
-
 	SCU_SAS_PCFG_WRITE(this_phy, scu_sas_pcfg_value);
+	scic_sds_phy_setup_transport(this_phy, SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX);
 }
 
 /**

drivers/scsi/isci/core/scic_sds_phy.h

@@ -247,10 +247,16 @@ struct scic_sds_phy {
 
 	struct sci_base_state_machine starting_substate_machine;
 
+	/**
+	 * This field is the pointer to the transport layer register for the SCU
+	 * hardware.
+	 */
+	struct scu_transport_layer_registers __iomem *transport_layer_registers;
+
 	/**
 	 * This field points to the link layer register set within the SCU.
 	 */
-	struct scu_link_layer_registers *link_layer_registers;
+	struct scu_link_layer_registers __iomem *link_layer_registers;
 
 };
 
@@ -383,7 +389,8 @@ void scic_sds_phy_set_port(
 
 enum sci_status scic_sds_phy_initialize(
 	struct scic_sds_phy *this_phy,
-	struct scu_link_layer_registers *link_layer_registers);
+	struct scu_transport_layer_registers __iomem *transport_layer_registers,
+	struct scu_link_layer_registers __iomem *link_layer_registers);
 
 enum sci_status scic_sds_phy_start(
 	struct scic_sds_phy *this_phy);
@@ -402,6 +409,10 @@ void scic_sds_phy_suspend(
 void scic_sds_phy_resume(
 	struct scic_sds_phy *this_phy);
 
+void scic_sds_phy_setup_transport(
+	struct scic_sds_phy *this_phy,
+	u32 device_id);
+
 /* --------------------------------------------------------------------------- */
 
 enum sci_status scic_sds_phy_event_handler(

drivers/scsi/isci/core/scic_sds_phy_registers.h

@@ -65,6 +65,59 @@
 
 #include "scic_sds_controller.h"
 
+/* **************************************************************************
+ * * SCU TRANSPORT LAYER REGISTER OPERATIONS
+ * ************************************************************************** */
+
+/**
+ * Macro to read the transport layer register associated with this phy
+ * object.
+ */
+#define scu_transport_layer_read(phy, reg) \
+	scu_register_read( \
+		scic_sds_phy_get_controller(phy), \
+		(phy)->transport_layer_registers->reg \
+		)
+
+/**
+ * Macro to write the transport layer register associated with this phy
+ * object.
+ */
+#define scu_transport_layer_write(phy, reg, value) \
+	scu_register_write( \
+		scic_sds_phy_get_controller(phy), \
+		(phy)->transport_layer_registers->reg, \
+		(value) \
+		)
+
+/* **************************************************************************
+ * * Transport Layer registers controlled by the phy object
+ * ************************************************************************** */
+
+/* This macro reads the Transport layer control register */
+#define SCU_TLCR_READ(phy) \
+	scu_transport_layer_read(phy, control)
+
+/* This macro writes the Transport layer control register */
+#define SCU_TLCR_WRITE(phy, value) \
+	scu_transport_layer_write(phy, control, value)
+
+/* This macro reads the Transport layer address translation register */
+#define SCU_TLADTR_READ(phy) \
+	scu_transport_layer_read(phy, address_translation)
+
+/* This macro writes the Transport layer address translation register */
+#define SCU_TLADTR_WRITE(phy) \
+	scu_transport_layer_write(phy, address_translation, value)
+
+/* This macro writes the STP Transport Layer Direct Attached RNi register */
+#define SCU_STPTLDARNI_WRITE(phy, index) \
+	scu_transport_layer_write(phy, stp_rni, index)
+
+/* This macro reads the STP Transport Layer Direct Attached RNi register */
+#define SCU_STPTLDARNI_READ(phy) \
+	scu_transport_layer_read(phy, stp_rni)
+
 /*
  * *****************************************************************************
  * * SCU LINK LAYER REGISTER OPERATIONS

drivers/scsi/isci/core/scic_sds_port.c

@@ -531,7 +531,6 @@ void scic_sds_port_construct(
 
 	this_port->timer_handle = NULL;
 
-	this_port->transport_layer_registers = NULL;
 	this_port->port_task_scheduler_registers = NULL;
 
 	for (index = 0; index < SCI_MAX_PHYS; index++) {
@@ -553,30 +552,14 @@ void scic_sds_port_construct(
  */
 enum sci_status scic_sds_port_initialize(
 	struct scic_sds_port *this_port,
-	void *transport_layer_registers,
-	void *port_task_scheduler_registers,
-	void *port_configuration_regsiter,
-	void *viit_registers)
+	void __iomem *port_task_scheduler_registers,
+	void __iomem *port_configuration_regsiter,
+	void __iomem *viit_registers)
 {
-	u32 tl_control;
-
-	this_port->transport_layer_registers      = transport_layer_registers;
 	this_port->port_task_scheduler_registers  = port_task_scheduler_registers;
 	this_port->port_pe_configuration_register = port_configuration_regsiter;
 	this_port->viit_registers                 = viit_registers;
 
-	scic_sds_port_set_direct_attached_device_id(
-		this_port,
-		SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
-		);
-
-	/*
-	 * Hardware team recommends that we enable the STP prefetch
-	 * for all ports */
-	tl_control = SCU_TLCR_READ(this_port);
-	tl_control |= SCU_TLCR_GEN_BIT(STP_WRITE_DATA_PREFETCH);
-	SCU_TLCR_WRITE(this_port, tl_control);
-
 	/*
 	 * If this is not the dummy port make the assignment of
 	 * the timer and start the state machine */
@@ -693,29 +676,25 @@ enum sci_status scic_port_hard_reset(
 }
 
 /**
- *
- * @this_port: The port for which the direct attached device id is to be
- *    assigned.
- *
  * This method assigns the direct attached device ID for this port.
+ *
+ * @param[in] this_port The port for which the direct attached device id is to
+ *       be assigned.
+ * @param[in] device_id The direct attached device ID to assign to the port.
+ *       This will be the RNi for the device
  */
-void scic_sds_port_set_direct_attached_device_id(
+void scic_sds_port_setup_transports(
 	struct scic_sds_port *this_port,
 	u32 device_id)
 {
-	u32 tl_control;
-
-	SCU_STPTLDARNI_WRITE(this_port, device_id);
+	u8 index;
 
-	/*
-	 * The read should guarntee that the first write gets posted
-	 * before the next write */
-	tl_control = SCU_TLCR_READ(this_port);
-	tl_control |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
-	SCU_TLCR_WRITE(this_port, tl_control);
+	for (index = 0; index < SCI_MAX_PHYS; index++) {
+		if (this_port->active_phy_mask & (1 << index))
+			scic_sds_phy_setup_transport(this_port->phy_table[index], device_id);
+	}
 }
 
-
 /**
  *
  * @this_port: This is the port on which the phy should be enabled.
@@ -1550,16 +1529,12 @@ static void scic_sds_port_suspend_port_task_scheduler(
 	struct scic_sds_port *this_port)
 {
 	u32 pts_control_value;
-	u32 tl_control_value;
 
 	pts_control_value = scu_port_task_scheduler_read(this_port, control);
-	tl_control_value = scu_transport_layer_read(this_port, control);
 
 	pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND);
-	tl_control_value  |= SCU_TLCR_GEN_BIT(CLEAR_TCI_NCQ_MAPPING_TABLE);
 
 	scu_port_task_scheduler_write(this_port, control, pts_control_value);
-	scu_transport_layer_write(this_port, control, tl_control_value);
 }
 
 /**
@@ -2624,11 +2599,6 @@ static void scic_sds_port_resetting_state_enter(
 	scic_sds_port_set_base_state_handlers(
 		this_port, SCI_BASE_PORT_STATE_RESETTING
 		);
-
-	scic_sds_port_set_direct_attached_device_id(
-		this_port,
-		SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
-		);
 }
 
 /**

drivers/scsi/isci/core/scic_sds_port.h

@@ -180,17 +180,12 @@ struct scic_sds_port {
 	struct sci_base_state_machine ready_substate_machine;
 
 	/* / Memory mapped hardware register space */
-	/**
-	 * This field is the pointer to the transport layer register for the SCU
-	 * hardware.
-	 */
-	struct scu_transport_layer_registers *transport_layer_registers;
 
 	/**
 	 * This field is the pointer to the port task scheduler registers for the SCU
 	 * hardware.
 	 */
-	struct scu_port_task_scheduler_registers *port_task_scheduler_registers;
+	struct scu_port_task_scheduler_registers __iomem *port_task_scheduler_registers;
 
 	/**
 	 * This field is identical for all port objects and points to the port task
@@ -202,7 +197,7 @@ struct scic_sds_port {
 	/**
 	 * This field is the VIIT register space for ths port object.
 	 */
-	struct scu_viit_entry *viit_registers;
+	struct scu_viit_entry __iomem *viit_registers;
 
 };
 
@@ -345,10 +340,9 @@ void scic_sds_port_construct(
 
 enum sci_status scic_sds_port_initialize(
 	struct scic_sds_port *this_port,
-	void *transport_layer_registers,
-	void *port_task_scheduler_registers,
-	void *port_configuration_regsiter,
-	void *viit_registers);
+	void __iomem *port_task_scheduler_registers,
+	void __iomem *port_configuration_regsiter,
+	void __iomem *viit_registers);
 
 /* --------------------------------------------------------------------------- */
 
@@ -360,7 +354,7 @@ enum sci_status scic_sds_port_remove_phy(
 	struct scic_sds_port *this_port,
 	struct scic_sds_phy *the_phy);
 
-void scic_sds_port_set_direct_attached_device_id(
+void scic_sds_port_setup_transports(
 	struct scic_sds_port *this_port,
 	u32 device_id);
 

drivers/scsi/isci/core/scic_sds_port_registers.h

@@ -63,29 +63,6 @@
  *
  */
 
-/**
- * scu_transport_layer_read() -
- *
- * Macro to read the transport layer register associated with this port object.
- */
-#define scu_transport_layer_read(port, reg) \
-	scu_register_read(\
-		scic_sds_port_get_controller(port), \
-		(port)->transport_layer_registers->reg \
-		)
-
-/**
- * scu_transport_layer_write() -
- *
- * Macro to write the transport layer register associated with this port object.
- */
-#define scu_transport_layer_write(port, reg, value) \
-	scu_register_write(\
-		scic_sds_port_get_controller(port), \
-		(port)->transport_layer_registers->reg,	\
-		(value)	\
-		)
-
 /**
  * scu_port_task_scheduler_read() -
  *
@@ -118,59 +95,6 @@
 		(value)	\
 		)
 
-/*
- * ****************************************************************************
- * * Transport Layer registers controlled by the port object
- * **************************************************************************** */
-
-/**
- * SCU_TLCR_READ() -
- *
- * This macro reads the Transport layer control register
- */
-#define SCU_TLCR_READ(port) \
-	scu_transport_layer_read(port, control)
-
-/**
- * SCU_TLCR_WRITE() -
- *
- * This macro writes the Transport layer control register
- */
-#define SCU_TLCR_WRITE(port, value) \
-	scu_transport_layer_write(port, control, value)
-
-/**
- * SCU_TLADTR_READ() -
- *
- * This macro reads the Transport layer address translation register
- */
-#define SCU_TLADTR_READ(port) \
-	scu_transport_layer_read(port, address_translation)
-
-/**
- * SCU_TLADTR_WRITE() -
- *
- * This macro writes the Transport layer address translation register
- */
-#define SCU_TLADTR_WRITE(port) \
-	scu_transport_layer_write(port, address_translation, value)
-
-/**
- * SCU_STPTLDARNI_WRITE() -
- *
- * This macro writes the STP Transport Layer Direct Attached RNi register.
- */
-#define SCU_STPTLDARNI_WRITE(port, index) \
-	scu_transport_layer_write(port, stp_rni, index)
-
-/**
- * SCU_STPTLDARNI_READ() -
- *
- * This macro reads the STP Transport Layer Direct Attached RNi register.
- */
-#define SCU_STPTLDARNI_READ(port) \
-	scu_transport_layer_read(port, stp_rni)
-
 /*
  * ****************************************************************************
  * * Port Task Scheduler registers controlled by the port object

drivers/scsi/isci/core/scic_sds_remote_device.c

@@ -1210,11 +1210,6 @@ static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler(
 		SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
 		);
 
-	scic_sds_port_set_direct_attached_device_id(
-		this_device->owning_port,
-		SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
-		);
-
 	sci_base_state_machine_change_state(
 		scic_sds_remote_device_get_base_state_machine(this_device),
 		SCI_BASE_REMOTE_DEVICE_STATE_FINAL
@@ -2018,11 +2013,6 @@ static void scic_sds_remote_device_resetting_state_exit(
 {
 	struct scic_sds_remote_device *this_device = (struct scic_sds_remote_device *)object;
 
-	scic_sds_port_set_direct_attached_device_id(
-		scic_sds_remote_device_get_port(this_device),
-		this_device->rnc->remote_node_index
-		);
-
 	scic_sds_remote_node_context_resume(this_device->rnc, NULL, NULL);
 }
 

drivers/scsi/isci/core/scic_sds_remote_node_context.c

@@ -689,11 +689,6 @@ static enum sci_status scic_sds_remote_node_context_tx_suspended_state_resume_ha
 	} else if (protocols.u.bits.attached_stp_target == 1) {
 		if (this_rnc->device->is_direct_attached) {
 			/* @todo Fix this since I am being silly in writing to the STPTLDARNI register. */
-			scic_sds_port_set_direct_attached_device_id(
-				this_rnc->device->owning_port,
-				this_rnc->remote_node_index
-				);
-
 			sci_base_state_machine_change_state(
 				&this_rnc->state_machine,
 				SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE
@@ -986,7 +981,7 @@ static void scic_sds_remote_node_context_validate_context_buffer(
 			);
 
 		if (this_rnc->device->is_direct_attached) {
-			scic_sds_port_set_direct_attached_device_id(
+			scic_sds_port_setup_transports(
 				this_rnc->device->owning_port,
 				this_rnc->remote_node_index
 				);
@@ -1016,13 +1011,6 @@ static void scic_sds_remote_node_context_invalidate_context_buffer(
 		this_rnc->device,
 		SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE
 		);
-
-	if (this_rnc->device->is_direct_attached) {
-		scic_sds_port_set_direct_attached_device_id(
-			this_rnc->device->owning_port,
-			SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX
-			);
-	}
 }
 
 /*
@@ -1112,6 +1100,7 @@ static void scic_sds_remote_node_context_resuming_state_enter(
 	struct sci_base_object *object)
 {
 	struct scic_sds_remote_node_context *rnc;
+	struct smp_discover_response_protocols protocols;
 
 	rnc = (struct scic_sds_remote_node_context *)object;
 
@@ -1121,6 +1110,20 @@ static void scic_sds_remote_node_context_resuming_state_enter(
 		SCIC_SDS_REMOTE_NODE_CONTEXT_RESUMING_STATE
 		);
 
+	/*
+	 * For direct attached SATA devices we need to clear the TLCR
+	 * NCQ to TCi tag mapping on the phy and in cases where we
+	 * resume because of a target reset we also need to update
+	 * the STPTLDARNI register with the RNi of the device
+	 */
+	scic_remote_device_get_protocols(rnc->device, &protocols);
+
+	if ((protocols.u.bits.attached_stp_target == 1) &&
+	    (rnc->device->is_direct_attached)) {
+		scic_sds_port_setup_transports(
+			rnc->device->owning_port, rnc->remote_node_index);
+	}
+
 	scic_sds_remote_device_post_request(
 		rnc->device,
 		SCU_CONTEXT_COMMAND_POST_RNC_RESUME