dmaengine: pl330: Make sure microcode is privileged

The PL330 is hard-wired such that instruction fetches on both the
manager and channel threads go out onto the bus with the "privileged"
bit set. This can become troublesome once there is an IOMMU or other
form of memory protection downstream, since those will typically be
programmed by the DMA mapping subsystem in the expectation of normal
unprivileged transactions (such as the PL330 channel threads' own data
accesses as currently configured by this driver).

To avoid the case of, say, an IOMMU blocking an unexpected privileged
transaction with a permission fault, use the newly-introduced
DMA_ATTR_PRIVILEGED attribute for the mapping of our microcode buffer.
That way the DMA layer can do whatever it needs to do to make things
continue to work as expected on more complex systems.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>
Tested-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMitchel Humpherys <mitchelh@codeaurora.org>
[rm: remove now-redundant local variable, clarify commit message]
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NWill Deacon <will.deacon@arm.com>

drivers/dma/pl330.c

@@ -1864,9 +1864,10 @@ static int dmac_alloc_resources(struct pl330_dmac *pl330)
 	 * Alloc MicroCode buffer for 'chans' Channel threads.
 	 * A channel's buffer offset is (Channel_Id * MCODE_BUFF_PERCHAN)
 	 */
-	pl330->mcode_cpu = dma_alloc_coherent(pl330->ddma.dev,
+	pl330->mcode_cpu = dma_alloc_attrs(pl330->ddma.dev,
 				chans * pl330->mcbufsz,
-				&pl330->mcode_bus, GFP_KERNEL);
+				&pl330->mcode_bus, GFP_KERNEL,
+				DMA_ATTR_PRIVILEGED);
 	if (!pl330->mcode_cpu) {
 		dev_err(pl330->ddma.dev, "%s:%d Can't allocate memory!\n",
 			__func__, __LINE__);