ARM: dts: uniphier: fix simple-bus unit address format error

Compiling the UniPhier DT files with W=1, DTC warns like follows:

Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/ethernet@00000000 simple-bus unit address format error, expected "0"
Warning (simple_bus_reg): Node /soc/system-bus@58c00000/support_card@1,1f00000/uart@000b0000 simple-bus unit address format error, expected "b0000"
Warning (simple_bus_reg): Node /soc/smpctrl@59800000 simple-bus unit address format error, expected "59801000"
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/boot/dts/uniphier-ld4.dtsi

@@ -201,7 +201,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-pro4.dtsi

@@ -233,7 +233,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-pro5.dtsi

@@ -320,7 +320,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-pxs2.dtsi

@@ -304,7 +304,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-sld3.dtsi

@@ -216,7 +216,7 @@
 			#size-cells = <1>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-sld8.dtsi

@@ -201,7 +201,7 @@
 			pinctrl-0 = <&pinctrl_system_bus>;
 		};
 
-		smpctrl@59800000 {
+		smpctrl@59801000 {
 			compatible = "socionext,uniphier-smpctrl";
 			reg = <0x59801000 0x400>;
 		};

arch/arm/boot/dts/uniphier-support-card.dtsi

@@ -53,14 +53,14 @@
 		#size-cells = <1>;
 		ranges = <0x00000000 1 0x01f00000 0x00100000>;
 
-		ethsc: ethernet@00000000 {
+		ethsc: ethernet@0 {
 			compatible = "smsc,lan9118", "smsc,lan9115";
 			reg = <0x00000000 0x1000>;
 			phy-mode = "mii";
 			reg-io-width = <4>;
 		};
 
-		serialsc: uart@000b0000 {
+		serialsc: uart@b0000 {
 			compatible = "ns16550a";
 			reg = <0x000b0000 0x20>;
 			clock-frequency = <12288000>;