ARM: dove: relocate internal registers device nodes

With mbus node in place, now relocate all internal device nodes
to internal-regs node with proper address ranges.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/dove.dtsi

@@ -5,6 +5,7 @@
 / {
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -42,22 +43,15 @@
 			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
 			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
 			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
-	};
 
-	soc@f1000000 {
+		internal-regs {
 			compatible = "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		interrupt-parent = <&intc>;
-
-		ranges = <0xc8000000 0xc8000000 0x0100000   /* CESA SRAM   1M */
-		          0xe0000000 0xe0000000 0x8000000   /* PCIe0 Mem 128M */
-		          0xe8000000 0xe8000000 0x8000000   /* PCIe1 Mem 128M */
-		          0xf0000000 0xf0000000 0x0100000   /* ScratchPad  1M */
-		          0x00000000 0xf1000000 0x1000000   /* SB/NB regs 16M */
-		          0xf2000000 0xf2000000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf2100000 0xf2100000 0x0100000   /* PCIe0 I/O   1M */
-		          0xf8000000 0xf8000000 0x8000000>; /* BootROM   128M */
+			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
+				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
+				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
+				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
 			mbusc: mbus-ctrl@20000 {
 				compatible = "marvell,mbus-controller";
@@ -444,7 +438,7 @@
 			crypto: crypto-engine@30000 {
 				compatible = "marvell,orion-crypto";
 				reg = <0x30000 0x10000>,
-			      <0xc8000000 0x800>;
+				      <0xffffe000 0x800>;
 				reg-names = "regs", "sram";
 				interrupts = <31>;
 				clocks = <&gate_clk 15>;
@@ -466,7 +460,6 @@
 
 				channel1 {
 					interrupts = <40>;
-				dmacap,memset;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
@@ -487,7 +480,6 @@
 
 				channel1 {
 					interrupts = <43>;
-				dmacap,memset;
 					dmacap,memcpy;
 					dmacap,xor;
 				};
@@ -508,7 +500,7 @@
 				};
 			};
 
-		eth: ethernet-controller@72000 {
+			eth: ethernet-ctrl@72000 {
 				compatible = "marvell,orion-eth";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -528,4 +520,5 @@
 				};
 			};
 		};
+	};
 };