Merge branch 'clockevents/4.2' of...

Merge branch 'clockevents/4.2' of http://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevents/clocksource changes from Daniel Lezcano:

  - Removed dead code in the files related to mach-msm for qcom (Stephen Boyd)
  - Cleaned up code for exynos_mct (Krzysztof Kozlowski)
  - Added the new timer lpc3220 (Joachim Eastwood)
  - Added the new timer STM32 and ARM system timer (Maxime Coquelin)

Documentation/devicetree/bindings/arm/armv7m_systick.txt

+* ARMv7M System Timer
+
+ARMv7-M includes a system timer, known as SysTick. Current driver only
+implements the clocksource feature.
+
+Required properties:
+- compatible	  : Should be "arm,armv7m-systick"
+- reg		  : The address range of the timer
+
+Required clocking property, have to be one of:
+- clocks	  : The input clock of the timer
+- clock-frequency : The rate in HZ in input of the ARM SysTick
+
+Examples:
+
+systick: timer@e000e010 {
+	compatible = "arm,armv7m-systick";
+	reg = <0xe000e010 0x10>;
+	clocks = <&clk_systick>;
+};
+
+systick: timer@e000e010 {
+	compatible = "arm,armv7m-systick";
+	reg = <0xe000e010 0x10>;
+	clock-frequency = <90000000>;
+};

Documentation/devicetree/bindings/timer/nxp,lpc3220-timer.txt

+* NXP LPC3220 timer
+
+The NXP LPC3220 timer is used on a wide range of NXP SoCs. This
+includes LPC32xx, LPC178x, LPC18xx and LPC43xx parts.
+
+Required properties:
+- compatible:
+	Should be "nxp,lpc3220-timer".
+- reg:
+	Address and length of the register set.
+- interrupts:
+	Reference to the timer interrupt
+- clocks:
+	Should contain a reference to timer clock.
+- clock-names:
+	Should contain "timerclk".
+
+Example:
+
+timer1: timer@40085000 {
+	compatible = "nxp,lpc3220-timer";
+	reg = <0x40085000 0x1000>;
+	interrupts = <13>;
+	clocks = <&ccu1 CLK_CPU_TIMER1>;
+	clock-names = "timerclk";
+};

Documentation/devicetree/bindings/timer/st,stm32-timer.txt

+. STMicroelectronics STM32 timer
+
+The STM32 MCUs family has several general-purpose 16 and 32 bits timers.
+
+Required properties:
+- compatible : Should be "st,stm32-timer"
+- reg : Address and length of the register set
+- clocks : Reference on the timer input clock
+- interrupts : Reference to the timer interrupt
+
+Optional properties:
+- resets: Reference to a reset controller asserting the timer
+
+Example:
+
+timer5: timer@40000c00 {
+	compatible = "st,stm32-timer";
+	reg = <0x40000c00 0x400>;
+	interrupts = <50>;
+	resets = <&rrc 259>;
+	clocks = <&clk_pmtr1>;
+};

drivers/clocksource/Kconfig

@@ -106,6 +106,16 @@ config CLKSRC_EFM32
 	  Support to use the timers of EFM32 SoCs as clock source and clock
 	  event device.
 
+config CLKSRC_LPC32XX
+	bool
+	select CLKSRC_MMIO
+	select CLKSRC_OF
+
+config CLKSRC_STM32
+	bool "Clocksource for STM32 SoCs" if COMPILE_TEST
+	depends on OF
+	select CLKSRC_MMIO
+
 config ARM_ARCH_TIMER
 	bool
 	select CLKSRC_OF if OF
@@ -139,6 +149,13 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	 Use ARM global timer clock source as sched_clock
 
+config ARMV7M_SYSTICK
+	bool
+	select CLKSRC_OF if OF
+	select CLKSRC_MMIO
+	help
+	  This options enables support for the ARMv7M system timer unit
+
 config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5

drivers/clocksource/Makefile

@@ -36,7 +36,9 @@ obj-$(CONFIG_ARCH_NSPIRE)	+= zevio-timer.o
 obj-$(CONFIG_ARCH_BCM_MOBILE)	+= bcm_kona_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence_ttc_timer.o
 obj-$(CONFIG_CLKSRC_EFM32)	+= time-efm32.o
+obj-$(CONFIG_CLKSRC_STM32)	+= timer-stm32.o
 obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exynos_mct.o
+obj-$(CONFIG_CLKSRC_LPC32XX)	+= time-lpc32xx.o
 obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
 obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
 obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
@@ -45,6 +47,7 @@ obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
+obj-$(CONFIG_ARMV7M_SYSTICK)		+= armv7m_systick.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
 obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
 obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o

drivers/clocksource/armv7m_systick.c

+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+
+#define SYST_CSR	0x00
+#define SYST_RVR	0x04
+#define SYST_CVR	0x08
+#define SYST_CALIB	0x0c
+
+#define SYST_CSR_ENABLE BIT(0)
+
+#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF
+
+static void __init system_timer_of_register(struct device_node *np)
+{
+	struct clk *clk = NULL;
+	void __iomem *base;
+	u32 rate;
+	int ret;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_warn("system-timer: invalid base address\n");
+		return;
+	}
+
+	ret = of_property_read_u32(np, "clock-frequency", &rate);
+	if (ret) {
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk))
+			goto out_unmap;
+
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto out_clk_put;
+
+		rate = clk_get_rate(clk);
+		if (!rate)
+			goto out_clk_disable;
+	}
+
+	writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR);
+	writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR);
+
+	ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate,
+			200, 24, clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("failed to init clocksource (%d)\n", ret);
+		if (clk)
+			goto out_clk_disable;
+		else
+			goto out_unmap;
+	}
+
+	pr_info("ARM System timer initialized as clocksource\n");
+
+	return;
+
+out_clk_disable:
+	clk_disable_unprepare(clk);
+out_clk_put:
+	clk_put(clk);
+out_unmap:
+	iounmap(base);
+	pr_warn("ARM System timer register failed (%d)\n", ret);
+}
+
+CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+			system_timer_of_register);

drivers/clocksource/exynos_mct.c

@@ -209,7 +209,7 @@ static void exynos4_frc_resume(struct clocksource *cs)
 	exynos4_mct_frc_start();
 }
 
-struct clocksource mct_frc = {
+static struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
@@ -413,7 +413,7 @@ static inline void exynos4_tick_set_mode(enum clock_event_mode mode,
 	}
 }
 
-static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
+static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
 	struct clock_event_device *evt = &mevt->evt;
 
@@ -426,12 +426,8 @@ static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+	if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
 		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
-		return 1;
-	} else {
-		return 0;
-	}
 }
 
 static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
@@ -564,18 +560,6 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem
 	free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
 }
 
-void __init mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1)
-{
-	mct_irqs[MCT_G0_IRQ] = irq_g0;
-	mct_irqs[MCT_L0_IRQ] = irq_l0;
-	mct_irqs[MCT_L1_IRQ] = irq_l1;
-	mct_int_type = MCT_INT_SPI;
-
-	exynos4_timer_resources(NULL, base);
-	exynos4_clocksource_init();
-	exynos4_clockevent_init();
-}
-
 static void __init mct_init_dt(struct device_node *np, unsigned int int_type)
 {
 	u32 nr_irqs, i;

drivers/clocksource/qcom-timer.c

@@ -40,8 +40,6 @@
 
 #define GPT_HZ 32768
 
-#define MSM_DGT_SHIFT 5
-
 static void __iomem *event_base;
 static void __iomem *sts_base;
 
@@ -232,7 +230,6 @@ static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 	register_current_timer_delay(&msm_delay_timer);
 }
 
-#ifdef CONFIG_ARCH_QCOM
 static void __init msm_dt_timer_init(struct device_node *np)
 {
 	u32 freq;
@@ -285,59 +282,3 @@ static void __init msm_dt_timer_init(struct device_node *np)
 }
 CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
 CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
-#else
-
-static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
-				u32 sts)
-{
-	void __iomem *base;
-
-	base = ioremap(addr, SZ_256);
-	if (!base) {
-		pr_err("Failed to map timer base\n");
-		return -ENOMEM;
-	}
-	event_base = base + event;
-	source_base = base + source;
-	if (sts)
-		sts_base = base + sts;
-
-	return 0;
-}
-
-static notrace cycle_t msm_read_timer_count_shift(struct clocksource *cs)
-{
-	/*
-	 * Shift timer count down by a constant due to unreliable lower bits
-	 * on some targets.
-	 */
-	return msm_read_timer_count(cs) >> MSM_DGT_SHIFT;
-}
-
-void __init msm7x01_timer_init(void)
-{
-	struct clocksource *cs = &msm_clocksource;
-
-	if (msm_timer_map(0xc0100000, 0x0, 0x10, 0x0))
-		return;
-	cs->read = msm_read_timer_count_shift;
-	cs->mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT));
-	/* 600 KHz */
-	msm_timer_init(19200000 >> MSM_DGT_SHIFT, 32 - MSM_DGT_SHIFT, 7,
-			false);
-}
-
-void __init msm7x30_timer_init(void)
-{
-	if (msm_timer_map(0xc0100000, 0x4, 0x24, 0x80))
-		return;
-	msm_timer_init(24576000 / 4, 32, 1, false);
-}
-
-void __init qsd8x50_timer_init(void)
-{
-	if (msm_timer_map(0xAC100000, 0x0, 0x10, 0x34))
-		return;
-	msm_timer_init(19200000 / 4, 32, 7, false);
-}
-#endif

drivers/clocksource/time-lpc32xx.c

+/*
+ * Clocksource driver for NXP LPC32xx/18xx/43xx timer
+ *
+ * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
+ *
+ * Based on:
+ * time-efm32 Copyright (C) 2013 Pengutronix
+ * mach-lpc32xx/timer.c Copyright (C) 2009 - 2010 NXP Semiconductors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/sched_clock.h>
+
+#define LPC32XX_TIMER_IR		0x000
+#define  LPC32XX_TIMER_IR_MR0INT	BIT(0)
+#define LPC32XX_TIMER_TCR		0x004
+#define  LPC32XX_TIMER_TCR_CEN		BIT(0)
+#define  LPC32XX_TIMER_TCR_CRST		BIT(1)
+#define LPC32XX_TIMER_TC		0x008
+#define LPC32XX_TIMER_PR		0x00c
+#define LPC32XX_TIMER_MCR		0x014
+#define  LPC32XX_TIMER_MCR_MR0I		BIT(0)
+#define  LPC32XX_TIMER_MCR_MR0R		BIT(1)
+#define  LPC32XX_TIMER_MCR_MR0S		BIT(2)
+#define LPC32XX_TIMER_MR0		0x018
+#define LPC32XX_TIMER_CTCR		0x070
+
+struct lpc32xx_clock_event_ddata {
+	struct clock_event_device evtdev;
+	void __iomem *base;
+};
+
+/* Needed for the sched clock */
+static void __iomem *clocksource_timer_counter;
+
+static u64 notrace lpc32xx_read_sched_clock(void)
+{
+	return readl(clocksource_timer_counter);
+}
+
+static int lpc32xx_clkevt_next_event(unsigned long delta,
+				     struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/*
+	 * Place timer in reset and program the delta in the prescale
+	 * register (PR). When the prescale counter matches the value
+	 * in PR the counter register is incremented and the compare
+	 * match will trigger. After setup the timer is released from
+	 * reset and enabled.
+	 */
+	writel_relaxed(LPC32XX_TIMER_TCR_CRST, ddata->base + LPC32XX_TIMER_TCR);
+	writel_relaxed(delta, ddata->base + LPC32XX_TIMER_PR);
+	writel_relaxed(LPC32XX_TIMER_TCR_CEN, ddata->base + LPC32XX_TIMER_TCR);
+
+	return 0;
+}
+
+static int lpc32xx_clkevt_shutdown(struct clock_event_device *evtdev)
+{
+	struct lpc32xx_clock_event_ddata *ddata =
+		container_of(evtdev, struct lpc32xx_clock_event_ddata, evtdev);
+
+	/* Disable the timer */
+	writel_relaxed(0, ddata->base + LPC32XX_TIMER_TCR);
+
+	return 0;
+}
+
+static int lpc32xx_clkevt_oneshot(struct clock_event_device *evtdev)
+{
+	/*
+	 * When using oneshot, we must also disable the timer
+	 * to wait for the first call to set_next_event().
+	 */
+	return lpc32xx_clkevt_shutdown(evtdev);
+}
+
+static irqreturn_t lpc32xx_clock_event_handler(int irq, void *dev_id)
+{
+	struct lpc32xx_clock_event_ddata *ddata = dev_id;
+
+	/* Clear match on channel 0 */
+	writel_relaxed(LPC32XX_TIMER_IR_MR0INT, ddata->base + LPC32XX_TIMER_IR);
+
+	ddata->evtdev.event_handler(&ddata->evtdev);
+
+	return IRQ_HANDLED;
+}
+
+static struct lpc32xx_clock_event_ddata lpc32xx_clk_event_ddata = {
+	.evtdev = {
+		.name			= "lpc3220 clockevent",
+		.features		= CLOCK_EVT_FEAT_ONESHOT,
+		.rating			= 300,
+		.set_next_event		= lpc32xx_clkevt_next_event,
+		.set_state_shutdown	= lpc32xx_clkevt_shutdown,
+		.set_state_oneshot	= lpc32xx_clkevt_oneshot,
+	},
+};
+
+static int __init lpc32xx_clocksource_init(struct device_node *np)
+{
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+	int ret;
+
+	clk = of_clk_get_by_name(np, "timerclk");
+	if (IS_ERR(clk)) {
+		pr_err("clock get failed (%lu)\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("clock enable failed (%d)\n", ret);
+		goto err_clk_enable;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("unable to map registers\n");
+		ret = -EADDRNOTAVAIL;
+		goto err_iomap;
+	}
+
+	/*
+	 * Disable and reset timer then set it to free running timer
+	 * mode (CTCR) with no prescaler (PR) or match operations (MCR).
+	 * After setup the timer is released from reset and enabled.
+	 */
+	writel_relaxed(LPC32XX_TIMER_TCR_CRST, base + LPC32XX_TIMER_TCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_PR);
+	writel_relaxed(0, base + LPC32XX_TIMER_MCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+	writel_relaxed(LPC32XX_TIMER_TCR_CEN, base + LPC32XX_TIMER_TCR);
+
+	rate = clk_get_rate(clk);
+	ret = clocksource_mmio_init(base + LPC32XX_TIMER_TC, "lpc3220 timer",
+				    rate, 300, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("failed to init clocksource (%d)\n", ret);
+		goto err_clocksource_init;
+	}
+
+	clocksource_timer_counter = base + LPC32XX_TIMER_TC;
+	sched_clock_register(lpc32xx_read_sched_clock, 32, rate);
+
+	return 0;
+
+err_clocksource_init:
+	iounmap(base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+	return ret;
+}
+
+static int __init lpc32xx_clockevent_init(struct device_node *np)
+{
+	void __iomem *base;
+	unsigned long rate;
+	struct clk *clk;
+	int ret, irq;
+
+	clk = of_clk_get_by_name(np, "timerclk");
+	if (IS_ERR(clk)) {
+		pr_err("clock get failed (%lu)\n", PTR_ERR(clk));
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("clock enable failed (%d)\n", ret);
+		goto err_clk_enable;
+	}
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_err("unable to map registers\n");
+		ret = -EADDRNOTAVAIL;
+		goto err_iomap;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("get irq failed\n");
+		ret = -ENOENT;
+		goto err_irq;
+	}
+
+	/*
+	 * Disable timer and clear any pending interrupt (IR) on match
+	 * channel 0 (MR0). Configure a compare match value of 1 on MR0
+	 * and enable interrupt, reset on match and stop on match (MCR).
+	 */
+	writel_relaxed(0, base + LPC32XX_TIMER_TCR);
+	writel_relaxed(0, base + LPC32XX_TIMER_CTCR);
+	writel_relaxed(LPC32XX_TIMER_IR_MR0INT, base + LPC32XX_TIMER_IR);
+	writel_relaxed(1, base + LPC32XX_TIMER_MR0);
+	writel_relaxed(LPC32XX_TIMER_MCR_MR0I | LPC32XX_TIMER_MCR_MR0R |
+		       LPC32XX_TIMER_MCR_MR0S, base + LPC32XX_TIMER_MCR);
+
+	rate = clk_get_rate(clk);
+	lpc32xx_clk_event_ddata.base = base;
+	clockevents_config_and_register(&lpc32xx_clk_event_ddata.evtdev,
+					rate, 1, -1);
+
+	ret = request_irq(irq, lpc32xx_clock_event_handler,
+			  IRQF_TIMER | IRQF_IRQPOLL, "lpc3220 clockevent",
+			  &lpc32xx_clk_event_ddata);
+	if (ret) {
+		pr_err("request irq failed\n");
+		goto err_irq;
+	}
+
+	return 0;
+
+err_irq:
+	iounmap(base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+	return ret;
+}
+
+/*
+ * This function asserts that we have exactly one clocksource and one
+ * clock_event_device in the end.
+ */
+static void __init lpc32xx_timer_init(struct device_node *np)
+{
+	static int has_clocksource, has_clockevent;
+	int ret;
+
+	if (!has_clocksource) {
+		ret = lpc32xx_clocksource_init(np);
+		if (!ret) {
+			has_clocksource = 1;
+			return;
+		}
+	}
+
+	if (!has_clockevent) {
+		ret = lpc32xx_clockevent_init(np);
+		if (!ret) {
+			has_clockevent = 1;
+			return;
+		}
+	}
+}
+CLOCKSOURCE_OF_DECLARE(lpc32xx_timer, "nxp,lpc3220-timer", lpc32xx_timer_init);

drivers/clocksource/timer-stm32.c

+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ *
+ * Inspired by time-efm32.c from Uwe Kleine-Koenig
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+#define TIM_CR1		0x00
+#define TIM_DIER	0x0c
+#define TIM_SR		0x10
+#define TIM_EGR		0x14
+#define TIM_PSC		0x28
+#define TIM_ARR		0x2c
+
+#define TIM_CR1_CEN	BIT(0)
+#define TIM_CR1_OPM	BIT(3)
+#define TIM_CR1_ARPE	BIT(7)
+
+#define TIM_DIER_UIE	BIT(0)
+
+#define TIM_SR_UIF	BIT(0)
+
+#define TIM_EGR_UG	BIT(0)
+
+struct stm32_clock_event_ddata {
+	struct clock_event_device evtdev;
+	unsigned periodic_top;
+	void __iomem *base;
+};
+
+static void stm32_clock_event_set_mode(enum clock_event_mode mode,
+				       struct clock_event_device *evtdev)
+{
+	struct stm32_clock_event_ddata *data =
+		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+	void *base = data->base;
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		writel_relaxed(data->periodic_top, base + TIM_ARR);
+		writel_relaxed(TIM_CR1_ARPE | TIM_CR1_CEN, base + TIM_CR1);
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+	default:
+		writel_relaxed(0, base + TIM_CR1);
+		break;
+	}
+}
+
+static int stm32_clock_event_set_next_event(unsigned long evt,
+					    struct clock_event_device *evtdev)
+{
+	struct stm32_clock_event_ddata *data =
+		container_of(evtdev, struct stm32_clock_event_ddata, evtdev);
+
+	writel_relaxed(evt, data->base + TIM_ARR);
+	writel_relaxed(TIM_CR1_ARPE | TIM_CR1_OPM | TIM_CR1_CEN,
+		       data->base + TIM_CR1);
+
+	return 0;
+}
+
+static irqreturn_t stm32_clock_event_handler(int irq, void *dev_id)
+{
+	struct stm32_clock_event_ddata *data = dev_id;
+
+	writel_relaxed(0, data->base + TIM_SR);
+
+	data->evtdev.event_handler(&data->evtdev);
+
+	return IRQ_HANDLED;
+}
+
+static struct stm32_clock_event_ddata clock_event_ddata = {
+	.evtdev = {
+		.name = "stm32 clockevent",
+		.features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
+		.set_mode = stm32_clock_event_set_mode,
+		.set_next_event = stm32_clock_event_set_next_event,
+		.rating = 200,
+	},
+};
+
+static void __init stm32_clockevent_init(struct device_node *np)
+{
+	struct stm32_clock_event_ddata *data = &clock_event_ddata;
+	struct clk *clk;
+	struct reset_control *rstc;
+	unsigned long rate, max_delta;
+	int irq, ret, bits, prescaler = 1;
+
+	clk = of_clk_get(np, 0);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		pr_err("failed to get clock for clockevent (%d)\n", ret);
+		goto err_clk_get;
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		pr_err("failed to enable timer clock for clockevent (%d)\n",
+		       ret);
+		goto err_clk_enable;
+	}
+
+	rate = clk_get_rate(clk);
+
+	rstc = of_reset_control_get(np, NULL);
+	if (!IS_ERR(rstc)) {
+		reset_control_assert(rstc);
+		reset_control_deassert(rstc);
+	}
+
+	data->base = of_iomap(np, 0);
+	if (!data->base) {
+		pr_err("failed to map registers for clockevent\n");
+		goto err_iomap;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	if (!irq) {
+		pr_err("%s: failed to get irq.\n", np->full_name);
+		goto err_get_irq;
+	}
+
+	/* Detect whether the timer is 16 or 32 bits */
+	writel_relaxed(~0U, data->base + TIM_ARR);
+	max_delta = readl_relaxed(data->base + TIM_ARR);
+	if (max_delta == ~0U) {
+		prescaler = 1;
+		bits = 32;
+	} else {
+		prescaler = 1024;
+		bits = 16;
+	}
+	writel_relaxed(0, data->base + TIM_ARR);
+
+	writel_relaxed(prescaler - 1, data->base + TIM_PSC);
+	writel_relaxed(TIM_EGR_UG, data->base + TIM_EGR);
+	writel_relaxed(TIM_DIER_UIE, data->base + TIM_DIER);
+	writel_relaxed(0, data->base + TIM_SR);
+
+	data->periodic_top = DIV_ROUND_CLOSEST(rate, prescaler * HZ);
+
+	clockevents_config_and_register(&data->evtdev,
+					DIV_ROUND_CLOSEST(rate, prescaler),
+					0x1, max_delta);
+
+	ret = request_irq(irq, stm32_clock_event_handler, IRQF_TIMER,
+			"stm32 clockevent", data);
+	if (ret) {
+		pr_err("%s: failed to request irq.\n", np->full_name);
+		goto err_get_irq;
+	}
+
+	pr_info("%s: STM32 clockevent driver initialized (%d bits)\n",
+			np->full_name, bits);
+
+	return;
+
+err_get_irq:
+	iounmap(data->base);
+err_iomap:
+	clk_disable_unprepare(clk);
+err_clk_enable:
+	clk_put(clk);
+err_clk_get:
+	return;
+}
+
+CLOCKSOURCE_OF_DECLARE(stm32, "st,stm32-timer", stm32_clockevent_init);