ARM: dts: sun4i: Remove underscores from nodes names

Some GPIO pinctrl nodes cannot be easily removed, because they would also
change the pin configuration, for example to add a pull resistor or change
the current delivered by the pin.

Those nodes still have underscores and unit-addresses in their node names
in our DTs, so adjust their name to remove the warnings. Use that occasion
to also fix some poorly chosen node-names.
Acked-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts

@@ -133,13 +133,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -155,13 +155,13 @@
 };
 
 &pio {
-	led_pins_cubieboard: led_pins@0 {
+	led_pins_cubieboard: led-pins {
 		pins = "PH20", "PH21";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun4i-a10-dserve-dsrv9703c.dts

@@ -75,7 +75,7 @@
 		max-microvolt = <3000000>;
 	};
 
-	reg_motor: reg_motor {
+	reg_motor: reg-motor {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc-motor";
 		regulator-min-microvolt = <3000000>;
@@ -160,13 +160,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-hyundai-a7hd.dts

@@ -88,13 +88,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-inet1.dts

@@ -166,13 +166,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

@@ -152,13 +152,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts

@@ -59,7 +59,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys-polled";
 		pinctrl-names = "default";
 		pinctrl-0 = <&key_pins_inet9f>;
@@ -310,7 +310,7 @@
 };
 
 &pio {
-	key_pins_inet9f: key_pins@0 {
+	key_pins_inet9f: key-pins {
 		pins = "PA0", "PA1", "PA3", "PA4",
 		       "PA5", "PA6", "PA8", "PA9",
 		       "PA11", "PA12", "PA13",
@@ -320,13 +320,13 @@
 		bias-pull-up;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-marsboard.dts

@@ -150,7 +150,7 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -158,19 +158,19 @@
 };
 
 &pio {
-	led_pins_olinuxinolime: led_pins@0 {
+	led_pins_olinuxinolime: led-pin {
 		pins = "PH2";
 		function = "gpio_out";
 		drive-strength = <20>;
 	};
 
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -74,7 +74,7 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -158,7 +158,7 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;

arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts

@@ -101,7 +101,7 @@
 &i2c2 {
 	status = "okay";
 
-	pixcir_ts@5c {
+	touchscreen@5c {
 		compatible = "pixcir,pixcir_tangoc";
 		reg = <0x5c>;
 		interrupt-parent = <&pio>;
@@ -148,13 +148,13 @@
 };
 
 &pio {
-	usb0_id_detect_pin: usb0_id_detect_pin@0 {
+	usb0_id_detect_pin: usb0-id-detect-pin {
 		pins = "PH4";
 		function = "gpio_in";
 		bias-pull-up;
 	};
 
-	usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+	usb0_vbus_detect_pin: usb0-vbus-detect-pin {
 		pins = "PH5";
 		function = "gpio_in";
 		bias-pull-down;