Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 0086085b 编写于 作者: M Mauro Carvalho Chehab
浏览文件
操作

media: em28xx-cards: fix most coding style issues 

There are a number of coding style issues, pointed by checkpatch
on strict mode.

Fix the ones that don't require code refactor here.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
上级 04964eb0
显示空白变更内容
内联 并排
Showing with 189 addition and 132 deletion
drivers/media/usb/em28xx/em28xx-cards.c
浏览文件 @ 0086085b
...@@ -36,7 +36,6 @@ ...@@ -36,7 +36,6 @@
#include <media/v4l2-common.h> #include <media/v4l2-common.h>
#include <sound/ac97_codec.h> #include <sound/ac97_codec.h>
#define DRIVER_NAME "em28xx" #define DRIVER_NAME "em28xx"
static int tuner = -1; static int tuner = -1;
...@@ -116,11 +115,6 @@ static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { ...@@ -116,11 +115,6 @@ static const struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */
/* Board - EM2870 Kworld 355u
Analog - No input analog */
/* Board - EM2882 Kworld 315U digital */ /* Board - EM2882 Kworld 315U digital */
static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = { static const struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
{EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10},
...@@ -151,11 +145,12 @@ static const struct em28xx_reg_seq kworld_330u_digital[] = { ...@@ -151,11 +145,12 @@ static const struct em28xx_reg_seq kworld_330u_digital[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* Evga inDtube /*
GPIO0 - Enable digital power (s5h1409) - low to enable * Evga inDtube
GPIO1 - Enable analog power (tvp5150/emp202) - low to enable * GPIO0 - Enable digital power (s5h1409) - low to enable
GPIO4 - xc3028 reset * GPIO1 - Enable analog power (tvp5150/emp202) - low to enable
GOP3 - s5h1409 reset * GPIO4 - xc3028 reset
* GOP3 - s5h1409 reset
*/ */
static const struct em28xx_reg_seq evga_indtube_analog[] = { static const struct em28xx_reg_seq evga_indtube_analog[] = {
{EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60},
...@@ -218,10 +213,12 @@ static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { ...@@ -218,10 +213,12 @@ static const struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* PCTV HD Mini (80e) GPIOs /*
0-5: not used * PCTV HD Mini (80e) GPIOs
6: demod reset, active low * 0-5: not used
7: LED on, active high */ * 6: demod reset, active low
* 7: LED on, active high
*/
static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
{EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/
{EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/
...@@ -229,9 +226,11 @@ static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = { ...@@ -229,9 +226,11 @@ static const struct em28xx_reg_seq em2874_pctv_80e_digital[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* eb1a:2868 Reddo DVB-C USB TV Box /*
GPIO4 - CU1216L NIM * eb1a:2868 Reddo DVB-C USB TV Box
Other GPIOs seems to be don't care. */ * GPIO4 - CU1216L NIM
* Other GPIOs seems to be don't care.
*/
static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { static const struct em28xx_reg_seq reddo_dvb_c_usb_box[] = {
{EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10},
{EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10},
...@@ -310,7 +309,8 @@ static const struct em28xx_reg_seq leadership_reset[] = { ...@@ -310,7 +309,8 @@ static const struct em28xx_reg_seq leadership_reset[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* 2013:024f PCTV nanoStick T2 290e /*
* 2013:024f PCTV nanoStick T2 290e
* GPIO_6 - demod reset * GPIO_6 - demod reset
* GPIO_7 - LED * GPIO_7 - LED
*/ */
...@@ -338,7 +338,8 @@ static const struct em28xx_reg_seq terratec_h5_digital[] = { ...@@ -338,7 +338,8 @@ static const struct em28xx_reg_seq terratec_h5_digital[] = {
}; };
#endif #endif
/* 2013:024f PCTV DVB-S2 Stick 460e /*
* 2013:024f PCTV DVB-S2 Stick 460e
* GPIO_0 - POWER_ON * GPIO_0 - POWER_ON
* GPIO_1 - BOOST * GPIO_1 - BOOST
* GPIO_2 - VUV_LNB (red LED) * GPIO_2 - VUV_LNB (red LED)
...@@ -408,7 +409,8 @@ static const struct em28xx_reg_seq hauppauge_930c_digital[] = { ...@@ -408,7 +409,8 @@ static const struct em28xx_reg_seq hauppauge_930c_digital[] = {
}; };
#endif #endif
/* 1b80:e425 MaxMedia UB425-TC /*
* 1b80:e425 MaxMedia UB425-TC
* 1b80:e1cc Delock 61959 * 1b80:e1cc Delock 61959
* GPIO_6 - demod reset, 0=active * GPIO_6 - demod reset, 0=active
* GPIO_7 - LED, 0=active * GPIO_7 - LED, 0=active
...@@ -420,7 +422,8 @@ static const struct em28xx_reg_seq maxmedia_ub425_tc[] = { ...@@ -420,7 +422,8 @@ static const struct em28xx_reg_seq maxmedia_ub425_tc[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* 2304:0242 PCTV QuatroStick (510e) /*
* 2304:0242 PCTV QuatroStick (510e)
* GPIO_2: decoder reset, 0=active * GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active * GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active * GPIO_6: demod reset, 0=active
...@@ -433,7 +436,8 @@ static const struct em28xx_reg_seq pctv_510e[] = { ...@@ -433,7 +436,8 @@ static const struct em28xx_reg_seq pctv_510e[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* 2013:0251 PCTV QuatroStick nano (520e) /*
* 2013:0251 PCTV QuatroStick nano (520e)
* GPIO_2: decoder reset, 0=active * GPIO_2: decoder reset, 0=active
* GPIO_4: decoder suspend, 0=active * GPIO_4: decoder suspend, 0=active
* GPIO_6: demod reset, 0=active * GPIO_6: demod reset, 0=active
...@@ -447,7 +451,8 @@ static const struct em28xx_reg_seq pctv_520e[] = { ...@@ -447,7 +451,8 @@ static const struct em28xx_reg_seq pctv_520e[] = {
{ -1, -1, -1, -1}, { -1, -1, -1, -1},
}; };
/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam /*
* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
* reg 0x80/0x84: * reg 0x80/0x84:
* GPIO_0: capturing LED, 0=on, 1=off * GPIO_0: capturing LED, 0=on, 1=off
* GPIO_2: AV mute button, 0=pressed, 1=unpressed * GPIO_2: AV mute button, 0=pressed, 1=unpressed
...@@ -1434,9 +1439,11 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -1434,9 +1439,11 @@ const struct em28xx_board em28xx_boards[] = {
.gpio = default_analog, .gpio = default_analog,
} }, } },
}, },
/* maybe there's a reason behind it why Terratec sells the Hybrid XS /*
as Prodigy XS with a different PID, let's keep it separated for now * maybe there's a reason behind it why Terratec sells the Hybrid XS
maybe we'll need it lateron */ * as Prodigy XS with a different PID, let's keep it separated for now
* maybe we'll need it later on
*/
[EM2880_BOARD_TERRATEC_PRODIGY_XS] = { [EM2880_BOARD_TERRATEC_PRODIGY_XS] = {
.name = "Terratec Prodigy XS", .name = "Terratec Prodigy XS",
.tuner_type = TUNER_XC2028, .tuner_type = TUNER_XC2028,
...@@ -1780,8 +1787,9 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -1780,8 +1787,9 @@ const struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_KWORLD_315U, .ir_codes = RC_MAP_KWORLD_315U,
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
/* Analog mode - still not ready */ #if 0
/*.input = { { /* FIXME: Analog mode - still not ready */
.input = { {
.type = EM28XX_VMUX_TELEVISION, .type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2, .vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO, .amux = EM28XX_AMUX_VIDEO,
...@@ -1799,7 +1807,8 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -1799,7 +1807,8 @@ const struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_LINE_IN, .amux = EM28XX_AMUX_LINE_IN,
.gpio = em2882_kworld_315u_analog1, .gpio = em2882_kworld_315u_analog1,
.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
} }, */ } },
#endif
}, },
[EM2880_BOARD_EMPIRE_DUAL_TV] = { [EM2880_BOARD_EMPIRE_DUAL_TV] = {
.name = "Empire dual TV", .name = "Empire dual TV",
...@@ -2160,17 +2169,21 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2160,17 +2169,21 @@ const struct em28xx_board em28xx_boards[] = {
.gpio = evga_indtube_analog, .gpio = evga_indtube_analog,
} }, } },
}, },
/* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + /*
Infineon TUA6034) */ * eb1a:2868 Empia EM2870 + Philips CU1216L NIM
* (Philips TDA10023 + Infineon TUA6034)
*/
[EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = {
.name = "Reddo DVB-C USB TV Box", .name = "Reddo DVB-C USB TV Box",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = reddo_dvb_c_usb_box, .tuner_gpio = reddo_dvb_c_usb_box,
.has_dvb = 1, .has_dvb = 1,
}, },
/* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold /*
* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold
* initially as the KWorld PlusTV 340U, then as the UB435-Q. * initially as the KWorld PlusTV 340U, then as the UB435-Q.
* Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2
*/
[EM2870_BOARD_KWORLD_A340] = { [EM2870_BOARD_KWORLD_A340] = {
.name = "KWorld PlusTV 340U or UB435-Q (ATSC)", .name = "KWorld PlusTV 340U or UB435-Q (ATSC)",
.tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */
...@@ -2178,30 +2191,38 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2178,30 +2191,38 @@ const struct em28xx_board em28xx_boards[] = {
.dvb_gpio = kworld_a340_digital, .dvb_gpio = kworld_a340_digital,
.tuner_gpio = default_tuner_gpio, .tuner_gpio = default_tuner_gpio,
}, },
/* 2013:024f PCTV nanoStick T2 290e. /*
* Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ * 2013:024f PCTV nanoStick T2 290e.
* Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2
*/
[EM28174_BOARD_PCTV_290E] = { [EM28174_BOARD_PCTV_290E] = {
.name = "PCTV nanoStick T2 290e", .name = "PCTV nanoStick T2 290e",
.def_i2c_bus = 1, .def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ,
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_290e, .tuner_gpio = pctv_290e,
.has_dvb = 1, .has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD, .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
}, },
/* 2013:024f PCTV DVB-S2 Stick 460e /*
* Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ * 2013:024f PCTV DVB-S2 Stick 460e
* Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293
*/
[EM28174_BOARD_PCTV_460E] = { [EM28174_BOARD_PCTV_460E] = {
.def_i2c_bus = 1, .def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (460e)", .name = "PCTV DVB-S2 Stick (460e)",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_460e, .tuner_gpio = pctv_460e,
.has_dvb = 1, .has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD, .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
}, },
/* eb1a:5006 Honestech VIDBOX NW03 /*
* Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ * eb1a:5006 Honestech VIDBOX NW03
* Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner
*/
[EM2860_BOARD_HT_VIDBOX_NW03] = { [EM2860_BOARD_HT_VIDBOX_NW03] = {
.name = "Honestech Vidbox NW03", .name = "Honestech Vidbox NW03",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
...@@ -2212,12 +2233,14 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2212,12 +2233,14 @@ const struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_LINE_IN, .amux = EM28XX_AMUX_LINE_IN,
}, { }, {
.type = EM28XX_VMUX_SVIDEO, .type = EM28XX_VMUX_SVIDEO,
.vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs check */
.amux = EM28XX_AMUX_LINE_IN, .amux = EM28XX_AMUX_LINE_IN,
} }, } },
}, },
/* 1b80:e425 MaxMedia UB425-TC /*
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ * 1b80:e425 MaxMedia UB425-TC
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
*/
[EM2874_BOARD_MAXMEDIA_UB425_TC] = { [EM2874_BOARD_MAXMEDIA_UB425_TC] = {
.name = "MaxMedia UB425-TC", .name = "MaxMedia UB425-TC",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
...@@ -2228,8 +2251,10 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2228,8 +2251,10 @@ const struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ, EM28XX_I2C_FREQ_400_KHZ,
}, },
/* 2304:0242 PCTV QuatroStick (510e) /*
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ * 2304:0242 PCTV QuatroStick (510e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
*/
[EM2884_BOARD_PCTV_510E] = { [EM2884_BOARD_PCTV_510E] = {
.name = "PCTV QuatroStick (510e)", .name = "PCTV QuatroStick (510e)",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
...@@ -2240,8 +2265,10 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2240,8 +2265,10 @@ const struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ, EM28XX_I2C_FREQ_400_KHZ,
}, },
/* 2013:0251 PCTV QuatroStick nano (520e) /*
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ * 2013:0251 PCTV QuatroStick nano (520e)
* Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2
*/
[EM2884_BOARD_PCTV_520E] = { [EM2884_BOARD_PCTV_520E] = {
.name = "PCTV QuatroStick nano (520e)", .name = "PCTV QuatroStick nano (520e)",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
...@@ -2261,9 +2288,11 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2261,9 +2288,11 @@ const struct em28xx_board em28xx_boards[] = {
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ, EM28XX_I2C_FREQ_400_KHZ,
}, },
/* 1b80:e1cc Delock 61959 /*
* 1b80:e1cc Delock 61959
* Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2
* mostly the same as MaxMedia UB-425-TC but different remote */ * mostly the same as MaxMedia UB-425-TC but different remote
*/
[EM2874_BOARD_DELOCK_61959] = { [EM2874_BOARD_DELOCK_61959] = {
.name = "Delock 61959", .name = "Delock 61959",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
...@@ -2309,8 +2338,10 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2309,8 +2338,10 @@ const struct em28xx_board em28xx_boards[] = {
.ir_codes = RC_MAP_PINNACLE_PCTV_HD, .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
.leds = pctv_80e_leds, .leds = pctv_80e_leds,
}, },
/* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam /*
* Empia EM2765 + OmniVision OV2640 */ * 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam
* Empia EM2765 + OmniVision OV2640
*/
[EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = {
.name = "SpeedLink Vicious And Devine Laplace webcam", .name = "SpeedLink Vicious And Devine Laplace webcam",
.xclk = EM28XX_XCLK_FREQUENCY_24MHZ, .xclk = EM28XX_XCLK_FREQUENCY_24MHZ,
...@@ -2327,23 +2358,29 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2327,23 +2358,29 @@ const struct em28xx_board em28xx_boards[] = {
.buttons = speedlink_vad_laplace_buttons, .buttons = speedlink_vad_laplace_buttons,
.leds = speedlink_vad_laplace_leds, .leds = speedlink_vad_laplace_leds,
}, },
/* 2013:0258 PCTV DVB-S2 Stick (461e) /*
* Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ * 2013:0258 PCTV DVB-S2 Stick (461e)
* Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293
*/
[EM28178_BOARD_PCTV_461E] = { [EM28178_BOARD_PCTV_461E] = {
.def_i2c_bus = 1, .def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.name = "PCTV DVB-S2 Stick (461e)", .name = "PCTV DVB-S2 Stick (461e)",
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_461e, .tuner_gpio = pctv_461e,
.has_dvb = 1, .has_dvb = 1,
.ir_codes = RC_MAP_PINNACLE_PCTV_HD, .ir_codes = RC_MAP_PINNACLE_PCTV_HD,
}, },
/* 2013:025f PCTV tripleStick (292e). /*
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ * 2013:025f PCTV tripleStick (292e).
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157
*/
[EM28178_BOARD_PCTV_292E] = { [EM28178_BOARD_PCTV_292E] = {
.name = "PCTV tripleStick (292e)", .name = "PCTV tripleStick (292e)",
.def_i2c_bus = 1, .def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = pctv_292e, .tuner_gpio = pctv_292e,
.has_dvb = 1, .has_dvb = 1,
...@@ -2363,12 +2400,15 @@ const struct em28xx_board em28xx_boards[] = { ...@@ -2363,12 +2400,15 @@ const struct em28xx_board em28xx_boards[] = {
.amux = EM28XX_AMUX_LINE_IN, .amux = EM28XX_AMUX_LINE_IN,
} }, } },
}, },
/* eb1a:8179 Terratec Cinergy T2 Stick HD. /*
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ * eb1a:8179 Terratec Cinergy T2 Stick HD.
* Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146
*/
[EM28178_BOARD_TERRATEC_T2_STICK_HD] = { [EM28178_BOARD_TERRATEC_T2_STICK_HD] = {
.name = "Terratec Cinergy T2 Stick HD", .name = "Terratec Cinergy T2 Stick HD",
.def_i2c_bus = 1, .def_i2c_bus = 1,
.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_400_KHZ,
.tuner_type = TUNER_ABSENT, .tuner_type = TUNER_ABSENT,
.tuner_gpio = terratec_t2_stick_hd, .tuner_gpio = terratec_t2_stick_hd,
.has_dvb = 1, .has_dvb = 1,
...@@ -2487,10 +2527,10 @@ struct usb_device_id em28xx_id_table[] = { ...@@ -2487,10 +2527,10 @@ struct usb_device_id em28xx_id_table[] = {
.driver_info = EM2870_BOARD_KWORLD_355U }, .driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0xeb1a, 0xe359), { USB_DEVICE(0xeb1a, 0xe359),
.driver_info = EM2870_BOARD_KWORLD_355U }, .driver_info = EM2870_BOARD_KWORLD_355U },
{ USB_DEVICE(0x1b80, 0xe302), { USB_DEVICE(0x1b80, 0xe302), /* Kaiser Baas Video to DVD maker */
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x1b80, 0xe304), { USB_DEVICE(0x1b80, 0xe304), /* Kworld DVD Maker 2 */
.driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x0ccd, 0x0036), { USB_DEVICE(0x0ccd, 0x0036),
.driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
{ USB_DEVICE(0x0ccd, 0x004c), { USB_DEVICE(0x0ccd, 0x004c),
...@@ -2686,8 +2726,9 @@ static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) ...@@ -2686,8 +2726,9 @@ static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
const struct em28xx_board *board = &em28xx_boards[dev->model]; const struct em28xx_board *board = &em28xx_boards[dev->model];
u8 xclk = board->xclk, i2c_speed = board->i2c_speed; u8 xclk = board->xclk, i2c_speed = board->i2c_speed;
/* Those are the default values for the majority of boards /*
Use those values if not specified otherwise at boards entry * Those are the default values for the majority of boards
* Use those values if not specified otherwise at boards entry
*/ */
if (!xclk) if (!xclk)
xclk = EM28XX_XCLK_IR_RC5_MODE | xclk = EM28XX_XCLK_IR_RC5_MODE |
...@@ -2695,7 +2736,6 @@ static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev) ...@@ -2695,7 +2736,6 @@ static inline void em28xx_set_xclk_i2c_speed(struct em28xx *dev)
em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk); em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
if (!i2c_speed) if (!i2c_speed)
i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
EM28XX_I2C_FREQ_100_KHZ; EM28XX_I2C_FREQ_100_KHZ;
...@@ -2719,7 +2759,8 @@ static inline void em28xx_set_model(struct em28xx *dev) ...@@ -2719,7 +2759,8 @@ static inline void em28xx_set_model(struct em28xx *dev)
dev->def_i2c_bus = dev->board.def_i2c_bus; dev->def_i2c_bus = dev->board.def_i2c_bus;
} }
/* Wait until AC97_RESET reports the expected value reliably before proceeding. /*
* Wait until AC97_RESET reports the expected value reliably before proceeding.
* We also check that two unrelated registers accesses don't return the same * We also check that two unrelated registers accesses don't return the same
* value to avoid premature return. * value to avoid premature return.
* This procedure helps ensuring AC97 register accesses are reliable. * This procedure helps ensuring AC97 register accesses are reliable.
...@@ -2749,13 +2790,16 @@ static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, ...@@ -2749,13 +2790,16 @@ static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev,
return -ETIMEDOUT; return -ETIMEDOUT;
} }
/* Since em28xx_pre_card_setup() requires a proper dev->model, /*
* Since em28xx_pre_card_setup() requires a proper dev->model,
* this won't work for boards with generic PCI IDs * this won't work for boards with generic PCI IDs
*/ */
static void em28xx_pre_card_setup(struct em28xx *dev) static void em28xx_pre_card_setup(struct em28xx *dev)
{ {
/* Set the initial XCLK and I2C clock values based on the board /*
definition */ * Set the initial XCLK and I2C clock values based on the board
* definition
*/
em28xx_set_xclk_i2c_speed(dev); em28xx_set_xclk_i2c_speed(dev);
/* request some modules */ /* request some modules */
...@@ -2767,17 +2811,19 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2767,17 +2811,19 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
case EM2861_BOARD_KWORLD_PVRTV_300U: case EM2861_BOARD_KWORLD_PVRTV_300U:
case EM2880_BOARD_KWORLD_DVB_305U: case EM2880_BOARD_KWORLD_DVB_305U:
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d);
msleep(10); usleep_range(10000, 11000);
break; break;
case EM2870_BOARD_COMPRO_VIDEOMATE: case EM2870_BOARD_COMPRO_VIDEOMATE:
/* TODO: someone can do some cleanup here... /*
not everything's needed */ * TODO: someone can do some cleanup here...
* not everything's needed
*/
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); em28xx_write_reg(dev, EM2880_R04_GPO, 0x01);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
mdelay(70); mdelay(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc);
...@@ -2788,8 +2834,10 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2788,8 +2834,10 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
mdelay(70); mdelay(70);
break; break;
case EM2870_BOARD_TERRATEC_XS_MT2060: case EM2870_BOARD_TERRATEC_XS_MT2060:
/* this device needs some gpio writes to get the DVB-T /*
demod work */ * this device needs some gpio writes to get the DVB-T
* demod work
*/
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70); mdelay(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
...@@ -2798,8 +2846,10 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2798,8 +2846,10 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
mdelay(70); mdelay(70);
break; break;
case EM2870_BOARD_PINNACLE_PCTV_DVB: case EM2870_BOARD_PINNACLE_PCTV_DVB:
/* this device needs some gpio writes to get the /*
DVB-T demod work */ * this device needs some gpio writes to get the
* DVB-T demod work
*/
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
mdelay(70); mdelay(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde);
...@@ -2815,13 +2865,13 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2815,13 +2865,13 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
case EM2882_BOARD_KWORLD_ATSC_315U: case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); em28xx_write_reg(dev, EM2880_R04_GPO, 0x08);
msleep(10); usleep_range(10000, 11000);
break; break;
case EM2860_BOARD_KAIOMY_TVNPC_U2: case EM2860_BOARD_KAIOMY_TVNPC_U2:
...@@ -2829,11 +2879,11 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2829,11 +2879,11 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1);
em28xx_write_regs(dev, 0x0d, "\x42", 1); em28xx_write_regs(dev, 0x0d, "\x42", 1);
em28xx_write_regs(dev, 0x08, "\xfd", 1); em28xx_write_regs(dev, 0x08, "\xfd", 1);
msleep(10); usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\xff", 1); em28xx_write_regs(dev, 0x08, "\xff", 1);
msleep(10); usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\x7f", 1); em28xx_write_regs(dev, 0x08, "\x7f", 1);
msleep(10); usleep_range(10000, 11000);
em28xx_write_regs(dev, 0x08, "\x6b", 1); em28xx_write_regs(dev, 0x08, "\x6b", 1);
break; break;
...@@ -2845,7 +2895,7 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2845,7 +2895,7 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff);
msleep(70); msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe);
msleep(70); msleep(70);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
...@@ -2853,7 +2903,8 @@ static void em28xx_pre_card_setup(struct em28xx *dev) ...@@ -2853,7 +2903,8 @@ static void em28xx_pre_card_setup(struct em28xx *dev)
break; break;
case EM2860_BOARD_TERRATEC_GRABBY: case EM2860_BOARD_TERRATEC_GRABBY:
/* HACK?: Ensure AC97 register reading is reliable before /*
* HACK?: Ensure AC97 register reading is reliable before
* proceeding. In practice, this will wait about 1.6 seconds. * proceeding. In practice, this will wait about 1.6 seconds.
*/ */
em28xx_wait_until_ac97_features_equals(dev, 0x6a90); em28xx_wait_until_ac97_features_equals(dev, 0x6a90);
...@@ -2883,7 +2934,8 @@ static int em28xx_hint_board(struct em28xx *dev) ...@@ -2883,7 +2934,8 @@ static int em28xx_hint_board(struct em28xx *dev)
return 0; return 0;
} }
/* HINT method: EEPROM /*
* HINT method: EEPROM
* *
* This method works only for boards with eeprom. * This method works only for boards with eeprom.
* Uses a hash of all eeprom bytes. The hash should be * Uses a hash of all eeprom bytes. The hash should be
...@@ -2909,7 +2961,8 @@ static int em28xx_hint_board(struct em28xx *dev) ...@@ -2909,7 +2961,8 @@ static int em28xx_hint_board(struct em28xx *dev)
} }
} }
/* HINT method: I2C attached devices /*
* HINT method: I2C attached devices
* *
* This method works for all boards. * This method works for all boards.
* Uses a hash of i2c scanned devices. * Uses a hash of i2c scanned devices.
...@@ -2987,9 +3040,9 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -2987,9 +3040,9 @@ static void em28xx_card_setup(struct em28xx *dev)
* This solution is only valid if they do not share eeprom * This solution is only valid if they do not share eeprom
* hash identities which has not been determined as yet. * hash identities which has not been determined as yet.
*/ */
if (em28xx_hint_board(dev) < 0) if (em28xx_hint_board(dev) < 0) {
dev_err(&dev->intf->dev, "Board not discovered\n"); dev_err(&dev->intf->dev, "Board not discovered\n");
else { } else {
em28xx_set_model(dev); em28xx_set_model(dev);
em28xx_pre_card_setup(dev); em28xx_pre_card_setup(dev);
} }
...@@ -3016,7 +3069,7 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -3016,7 +3069,7 @@ static void em28xx_card_setup(struct em28xx *dev)
{ {
struct tveeprom tv; struct tveeprom tv;
if (dev->eedata == NULL) if (!dev->eedata)
break; break;
#if defined(CONFIG_MODULES) && defined(MODULE) #if defined(CONFIG_MODULES) && defined(MODULE)
request_module("tveeprom"); request_module("tveeprom");
...@@ -3035,9 +3088,9 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -3035,9 +3088,9 @@ static void em28xx_card_setup(struct em28xx *dev)
} }
case EM2882_BOARD_KWORLD_ATSC_315U: case EM2882_BOARD_KWORLD_ATSC_315U:
em28xx_write_reg(dev, 0x0d, 0x42); em28xx_write_reg(dev, 0x0d, 0x42);
msleep(10); usleep_range(10000, 11000);
em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd);
msleep(10); usleep_range(10000, 11000);
break; break;
case EM2820_BOARD_KWORLD_PVRTV2800RF: case EM2820_BOARD_KWORLD_PVRTV2800RF:
/* GPIO enables sound on KWORLD PVR TV 2800RF */ /* GPIO enables sound on KWORLD PVR TV 2800RF */
...@@ -3062,10 +3115,12 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -3062,10 +3115,12 @@ static void em28xx_card_setup(struct em28xx *dev)
if (!em28xx_hint_board(dev)) if (!em28xx_hint_board(dev))
em28xx_set_model(dev); em28xx_set_model(dev);
/* In cases where we had to use a board hint, the call to /*
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, * In cases where we had to use a board hint, the call to
so make the call now so the analog GPIOs are set properly * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
before probing the i2c bus. */ * so make the call now so the analog GPIOs are set properly
* before probing the i2c bus.
*/
em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break; break;
...@@ -3087,10 +3142,12 @@ static void em28xx_card_setup(struct em28xx *dev) ...@@ -3087,10 +3142,12 @@ static void em28xx_card_setup(struct em28xx *dev)
if (!em28xx_hint_board(dev)) if (!em28xx_hint_board(dev))
em28xx_set_model(dev); em28xx_set_model(dev);
/* In cases where we had to use a board hint, the call to /*
em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, * In cases where we had to use a board hint, the call to
so make the call now so the analog GPIOs are set properly * em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
before probing the i2c bus. */ * so make the call now so the analog GPIOs are set properly
* before probing the i2c bus.
*/
em28xx_gpio_set(dev, dev->board.tuner_gpio); em28xx_gpio_set(dev, dev->board.tuner_gpio);
em28xx_set_mode(dev, EM28XX_ANALOG_MODE); em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
break; break;
...@@ -3175,8 +3232,8 @@ static void request_module_async(struct work_struct *work) ...@@ -3175,8 +3232,8 @@ static void request_module_async(struct work_struct *work)
*/ */
/* /*
* Devicdes with an audio-only interface also have a V4L/DVB/RC * Devices with an audio-only intf also have a V4L/DVB/RC
* interface. Don't register extensions twice on those devices. * intf. Don't register extensions twice on those devices.
*/ */
if (dev->is_audio_only) { if (dev->is_audio_only) {
#if defined(CONFIG_MODULES) && defined(MODULE) #if defined(CONFIG_MODULES) && defined(MODULE)
...@@ -3237,7 +3294,6 @@ static int em28xx_media_device_init(struct em28xx *dev, ...@@ -3237,7 +3294,6 @@ static int em28xx_media_device_init(struct em28xx *dev,
static void em28xx_unregister_media_device(struct em28xx *dev) static void em28xx_unregister_media_device(struct em28xx *dev)
{ {
#ifdef CONFIG_MEDIA_CONTROLLER #ifdef CONFIG_MEDIA_CONTROLLER
if (dev->media_dev) { if (dev->media_dev) {
media_device_unregister(dev->media_dev); media_device_unregister(dev->media_dev);
...@@ -3252,7 +3308,7 @@ static void em28xx_unregister_media_device(struct em28xx *dev) ...@@ -3252,7 +3308,7 @@ static void em28xx_unregister_media_device(struct em28xx *dev)
* em28xx_release_resources() * em28xx_release_resources()
* unregisters the v4l2,i2c and usb devices * unregisters the v4l2,i2c and usb devices
* called when the device gets disconnected or at module unload * called when the device gets disconnected or at module unload
*/ */
static void em28xx_release_resources(struct em28xx *dev) static void em28xx_release_resources(struct em28xx *dev)
{ {
struct usb_device *udev = interface_to_usbdev(dev->intf); struct usb_device *udev = interface_to_usbdev(dev->intf);
...@@ -3455,7 +3511,7 @@ static int em28xx_duplicate_dev(struct em28xx *dev) ...@@ -3455,7 +3511,7 @@ static int em28xx_duplicate_dev(struct em28xx *dev)
int nr; int nr;
struct em28xx *sec_dev = kzalloc(sizeof(*sec_dev), GFP_KERNEL); struct em28xx *sec_dev = kzalloc(sizeof(*sec_dev), GFP_KERNEL);
if (sec_dev == NULL) { if (!sec_dev) {
dev->dev_next = NULL; dev->dev_next = NULL;
return -ENOMEM; return -ENOMEM;
} }
...@@ -3527,7 +3583,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3527,7 +3583,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* allocate memory for our device state and initialize it */ /* allocate memory for our device state and initialize it */
dev = kzalloc(sizeof(*dev), GFP_KERNEL); dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) { if (!dev) {
retval = -ENOMEM; retval = -ENOMEM;
goto err; goto err;
} }
...@@ -3536,7 +3592,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3536,7 +3592,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
dev->alt_max_pkt_size_isoc = dev->alt_max_pkt_size_isoc =
kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) *
interface->num_altsetting, GFP_KERNEL); interface->num_altsetting, GFP_KERNEL);
if (dev->alt_max_pkt_size_isoc == NULL) { if (!dev->alt_max_pkt_size_isoc) {
kfree(dev); kfree(dev);
retval = -ENOMEM; retval = -ENOMEM;
goto err; goto err;
...@@ -3546,7 +3602,9 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3546,7 +3602,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
for (i = 0; i < interface->num_altsetting; i++) { for (i = 0; i < interface->num_altsetting; i++) {
int ep; int ep;
for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { for (ep = 0;
ep < interface->altsetting[i].desc.bNumEndpoints;
ep++) {
const struct usb_endpoint_descriptor *e; const struct usb_endpoint_descriptor *e;
int sizedescr, size; int sizedescr, size;
...@@ -3611,7 +3669,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3611,7 +3669,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
break; break;
} }
} }
/* NOTE: /*
* NOTE:
* Old logic with support for isoc transfers only was: * Old logic with support for isoc transfers only was:
* 0x82 isoc => analog * 0x82 isoc => analog
* 0x83 isoc => audio * 0x83 isoc => audio
...@@ -3728,7 +3787,7 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3728,7 +3787,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
dev->num_alt = interface->num_altsetting; dev->num_alt = interface->num_altsetting;
if ((unsigned)card[nr] < em28xx_bcount) if ((unsigned int)card[nr] < em28xx_bcount)
dev->model = card[nr]; dev->model = card[nr];
/* save our data pointer in this interface device */ /* save our data pointer in this interface device */
...@@ -3737,9 +3796,8 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3737,9 +3796,8 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* allocate device struct and check if the device is a webcam */ /* allocate device struct and check if the device is a webcam */
mutex_init(&dev->lock); mutex_init(&dev->lock);
retval = em28xx_init_dev(dev, udev, interface, nr); retval = em28xx_init_dev(dev, udev, interface, nr);
if (retval) { if (retval)
goto err_free; goto err_free;
}
if (usb_xfer_mode < 0) { if (usb_xfer_mode < 0) {
if (dev->is_webcam) if (dev->is_webcam)
...@@ -3754,7 +3812,6 @@ static int em28xx_usb_probe(struct usb_interface *interface, ...@@ -3754,7 +3812,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
if (has_video && if (has_video &&
dev->board.decoder == EM28XX_NODECODER && dev->board.decoder == EM28XX_NODECODER &&
dev->em28xx_sensor == EM28XX_NOSENSOR) { dev->em28xx_sensor == EM28XX_NOSENSOR) {
dev_err(&interface->dev, dev_err(&interface->dev,
"Currently, V4L2 is not supported on this model\n"); "Currently, V4L2 is not supported on this model\n");
has_video = false; has_video = false;
...@@ -3876,7 +3933,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) ...@@ -3876,7 +3933,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
if (!dev) if (!dev)
return; return;
if (dev->dev_next != NULL) { if (dev->dev_next) {
dev->dev_next->disconnected = 1; dev->dev_next->disconnected = 1;
dev_info(&dev->intf->dev, "Disconnecting %s\n", dev_info(&dev->intf->dev, "Disconnecting %s\n",
dev->dev_next->name); dev->dev_next->name);
...@@ -3891,11 +3948,11 @@ static void em28xx_usb_disconnect(struct usb_interface *interface) ...@@ -3891,11 +3948,11 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
em28xx_close_extension(dev); em28xx_close_extension(dev);
if (dev->dev_next != NULL) if (dev->dev_next)
em28xx_release_resources(dev->dev_next); em28xx_release_resources(dev->dev_next);
em28xx_release_resources(dev); em28xx_release_resources(dev);
if (dev->dev_next != NULL) { if (dev->dev_next) {
kref_put(&dev->dev_next->ref, em28xx_free_device); kref_put(&dev->dev_next->ref, em28xx_free_device);
dev->dev_next = NULL; dev->dev_next = NULL;
} }
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或