# hwi ## Command Function This command is used to query information about interrupts. ## Syntax hwi ## Parameters None ## Usage - Run **hwi** to display the interrupt IDs, count of interrupts, and registered interrupt names of the system. - If **LOSCFG\_CPUP\_INCLUDE\_IRQ** is enabled, the interrupt handling time \(ATime\), CPU usage, and type of each interrupt are also displayed. ## Example Run **hwi**. ## Output - Interrupt information \(**LOSCFG\_CPUP\_INCLUDE\_IRQ** disabled\): ``` OHOS # hwi InterruptNo Count Name 0: 0: 1: 1025641: 2: 0: 29: 824049: 37: 0: rtc_alarm 38: 24: uart_pl011 48: 3: GPIO 59: 0: 62: 530: MMC_IRQ 63: 70: MMC_IRQ 64: 280: ETH 67: 58: tde 68: 0: JPGE_0 69: 0: IVE 70: 0: VGS 72: 0: VEDU_0 73: 0: nnie0 74: 0: nnie_gdc0 75: 0: VPSS 76: 0: VI_PROC0 77: 0: JPEGD_0 83: 49455: HIFB_SOFT_INT 87: 0: AIO interrupt 88: 0: VI_CAP0 89: 0: MIPI_RX 90: 49455: VO int 91: 49456: HIFB Int 96: 17601: MMC_IRQ 100: 0: SPI_HI35XX 101: 0: SPI_HI35XX 102: 0: SPI_HI35XX ``` - Interrupt information \(**LOSCFG\_CPUP\_INCLUDE\_IRQ** enabled\): ``` OHOS # hwi InterruptNo Count ATime(us) CPUUSE CPUUSE10s CPUUSE1s Mode Name 0: 0 0 0.0 0.0 0.0 normal 1: 937031 0 0.1 0.1 0.1 normal 2: 0 0 0.0 0.0 0.0 normal 29: 726166 5 0.54 0.57 0.59 normal 37: 0 0 0.0 0.0 0.0 normal rtc_alarm 38: 17 5 0.0 0.0 0.0 normal uart_pl011 48: 3 4 0.0 0.0 0.0 normal GPIO 59: 0 0 0.0 0.0 0.0 normal 62: 531 1 0.0 0.0 0.0 normal MMC_IRQ 63: 69 1 0.0 0.0 0.0 normal MMC_IRQ 64: 292 2 0.0 0.0 0.0 normal ETH 67: 54 76 0.0 0.0 0.0 shared tde 68: 0 0 0.0 0.0 0.0 shared JPGE_0 69: 0 0 0.0 0.0 0.0 shared IVE 70: 0 0 0.0 0.0 0.0 shared VGS 72: 0 0 0.0 0.0 0.0 shared VEDU_0 73: 0 0 0.0 0.0 0.0 shared nnie0 74: 0 0 0.0 0.0 0.0 shared nnie_gdc0 75: 0 0 0.0 0.0 0.0 shared VPSS 76: 0 0 0.0 0.0 0.0 shared VI_PROC0 77: 0 0 0.0 0.0 0.0 shared JPEGD_0 83: 45529 8 0.5 0.5 0.5 shared HIFB_SOFT_INT 87: 0 0 0.0 0.0 0.0 shared AIO interrupt 88: 0 0 0.0 0.0 0.0 shared VI_CAP0 89: 0 0 0.0 0.0 0.0 shared MIPI_RX 90: 45534 11 0.6 0.7 0.7 shared VO int 91: 45533 2 0.1 0.1 0.1 shared HIFB Int 96: 17383 2 0.0 0.0 0.0 normal MMC_IRQ 100: 0 0 0.0 0.0 0.0 normal SPI_HI35XX 101: 0 0 0.0 0.0 0.0 normal SPI_HI35XX 102: 0 0 0.0 0.0 0.0 normal SPI_HI35XX ``` **Table 1** Output
Interrupt type, which can be any of the following: |