update docs

Signed-off-by: Nester.zhou <ester.zhou@huawei.com>

en/device-dev/quick-start/quickstart-lite-faq-burning.md

@@ -125,15 +125,12 @@
 1. Obtain the U-Boot file.
 
    > ![icon-notice.gif](public_sys-resources/icon-notice.gif) **NOTICE**
-   > The U-Boot file of the two boards can be obtained from the following paths, respectively.
    >
-   > Hi3516D V300: device\hisilicon\hispark_taurus\sdk_liteos\uboot\out\boot\u-boot-hi3516dv300.bin
-   > 
-   > Hi3518E V300: device\hisilicon\hispark_aries\sdk_liteos\uboot\out\boot\u-boot-hi3518ev300.bin
+   > The U-Boot file can be obtained from the following path:  device\hisilicon\hispark_taurus\sdk_liteos\uboot\out\boot\u-boot-hi3516dv300.bin.
 
 2. Burn the U-Boot file by following the procedures for burning a U-Boot file over USB.
 
-   Select the U-Boot files of corresponding development boards for burning by referring to [Burning to Hi3516D V300](https://device.harmonyos.com/en/docs/documentation/guide/ide-hi3516-upload-0000001052148681)/[Burning to Hi3518E V300](https://device.harmonyos.com/en/docs/documentation/guide/ide-hi3518-upload-0000001057313128#section93591711580).
+   Select the U-Boot files of corresponding development boards for burning by referring to [Burning to Hi3516D V300](https://device.harmonyos.com/en/docs/documentation/guide/ide-hi3516-upload-0000001052148681).
 
 3. Log in to the serial port after the burning is complete.
 

en/device-dev/quick-start/quickstart-standard-running-hi3516-create.md

@@ -21,7 +21,7 @@ build
 └── subsystem_config.json
 productdefine/common
 └── products
-    └── Hi3568DV300.json
+    └── Hi3516DV300.json
 ```