diff --git a/en/device-dev/quick-start/Readme-EN.md b/en/device-dev/quick-start/Readme-EN.md index aeb8475b50916a775490ac9ab4f8b2689f2e7403..ef434b92f22e3f876ee200a440e1722c676bab1f 100644 --- a/en/device-dev/quick-start/Readme-EN.md +++ b/en/device-dev/quick-start/Readme-EN.md @@ -1,7 +1,6 @@ # Getting Started -- [Environment Setup](environment-setup.md) - - [Basic OS Environment Setup](basic-os-environment-setup.md) +- [Basic OS Environment Setup](basic-os-environment-setup.md) - [Hi3861 Development Board](hi3861-development-board.md) - [Introduction to the Hi3861 Development Board](introduction-to-the-hi3861-development-board.md) diff --git a/en/device-dev/quick-start/basic-os-environment-setup.md b/en/device-dev/quick-start/basic-os-environment-setup.md index d6e60d49369e13cca22926513dfaa8745691cf46..b6a85ac5b30d8828c7fa5363be34c8a545a51675 100644 --- a/en/device-dev/quick-start/basic-os-environment-setup.md +++ b/en/device-dev/quick-start/basic-os-environment-setup.md @@ -78,7 +78,7 @@ Before setting up the environment for a development board, you must set up the b

Operating system

-

Ubuntu 16.04 64-bit or later is used for the Linux OS, and bash is used as the shell.

+

Ubuntu 16.04 64-bit or later is used for the Linux OS.

NOTE:

Common software such as samba and vim is installed in the OS by default. Adaptation is required to support Linux file sharing.

@@ -170,7 +170,7 @@ The following table describes the tools required for setting up the general envi

hb

-

Compiles the source code.

+

Compiles the OpenHarmony source code.

Internet

@@ -189,8 +189,8 @@ You can use Docker to quickly install the Linux environment. For details, see * ## Using an Installation Package to Install the Linux Environment >![](public_sys-resources/icon-notice.gif) **NOTICE:** ->- If you acquire the source code using an HPM component or HPM CLI tool, compilation tools like **gn** and **ninja** are not required. ->- \(Recommended\) If you obtain the source code via the mirror site or code repository, install compilation tools such as **gn** and **ninja**. When installing **gn** and **ninja**, ensure that the environment variable paths of the compilation tools are unique. +>- If you acquire the source code using an HPM component or HPM CLI tool, compilation tools like **gn**, **ninja**, **LLVM**, and **hb** are not required. +>- \(Recommended\) If you obtain the source code via the mirror site or code repository, install compilation tools such as **gn**, **ninja**, **LLVM**, and **hb**. When installing a compilation tool, ensure that its environment variable path is unique. ### Connecting to a Linux Server @@ -380,8 +380,7 @@ Using PuTTY to log in to a Linux server from a PC running Windows **Prerequisites** -- Python 3.7.4 or later has been installed. For details, see [Installing and Configuring Python](#section11255767343). -- The source code has been downloaded. For details, see [Source Code Acquisition](../get-code/source-code-acquisition.md). +Python 3.7.4 or later has been installed. For details, see [Installing and Configuring Python](#section11255767343). **Installation** @@ -439,7 +438,7 @@ python3 -m pip uninstall ohos-build ## Obtaining OpenHarmony Source Code -You need to acquire OpenHarmony [source code](https://repo.huaweicloud.com/harmonyos/os/1.0.1/code-1.0.1.tar.gz), download it on a Linux server, and decompress it. For more obtaining methods, see [Source Code Acquisition](../get-code/source-code-acquisition.md). +You need to acquire [source code](../get-code/源码获取.md), download it on a Linux server, and decompress it. ## FAQ @@ -521,7 +520,7 @@ The message "module 'platform' has no attribute 'linux\_distribution'" is displa ``` sudo apt-get remove python3-apt - sduo apt-get install python3-apt + sudo apt-get install python3-apt ``` diff --git a/en/device-dev/quick-start/developing-the-first-driver-running-on-hi3516.md b/en/device-dev/quick-start/developing-the-first-driver-running-on-hi3516.md index 65a8c919ef79343adbd839bb9dfe6be8c429815c..b467cc2ce4dda34bcf9f520070453067b379666b 100644 --- a/en/device-dev/quick-start/developing-the-first-driver-running-on-hi3516.md +++ b/en/device-dev/quick-start/developing-the-first-driver-running-on-hi3516.md @@ -437,14 +437,14 @@ Compile and burn images by referring to [Building](developing-the-first-example ![](figures/chuankou1.png) - 1. Click **Serial port** to enable it. - 2. Enter the serial port number queried in the "Burning" section \(COM11 is used in this example\) and press **Enter** until **hisillicon** is displayed. + 1. Click **Monitor** to enable the serial port. + 2. Press **Enter** repeatedly until **hisilicon** displays. 3. Go to step [2](developing-the-first-example-program-running-on-hi3516.md#l5b42e79a33ea4d35982b78a22913b0b1) if the board is started for the first time or the startup parameters need to be modified; go to step [3](developing-the-first-example-program-running-on-hi3516.md#ld26f18828aa44c36bfa36be150e60e49) otherwise. 2. \(Mandatory when the board is started for the first time\) Modify the bootcmd and bootargs parameters of U-boot. You need to perform this step only once if the parameters need not to be modified during the operation. The board automatically starts after it is reset. >![](public_sys-resources/icon-notice.gif) **NOTICE:** - >The default waiting time in the U-boot is 2s. You can press **Enter** to interrupt the waiting and run the **reset** command to restart the system after "hisillicon" is displayed. + >The default waiting time in the U-boot is 2s. You can press **Enter** to interrupt the waiting and run the **reset** command to restart the system after "hisilicon" is displayed. **Table 1** Parameters of the U-boot diff --git a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3516.md b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3516.md index cd61a5f27c16836957d3575adce898f43f383c1d..ab89fbd1d7afa95ffdd9fa2dd8c21ce4a1d0e847 100644 --- a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3516.md +++ b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3516.md @@ -1,32 +1,131 @@ # Developing the First Example Program Running on Hi3516 -- [Modifying a Program](#s8efc1952ebfe4d1ea717182e108c29bb) +- [Creating a Program](#s8efc1952ebfe4d1ea717182e108c29bb) - [Building](#section1077671315253) - [Burning](#section08153912587) - [Running an Image](#section380511712615) - [Running a Program](#section5276734182615) -This section describes how to modify, compile, burn, and run the first program, and finally print **Hello OHOS!** on the develop board. +This section describes how to create, compile, burn, and run the first program, and finally print **Hello OHOS!** on the develop board. -## Modifying a Program +## Creating a Program -The code of **helloworld.c** in the **applications/sample/camera/app/src** directory is shown in the following example. You can customize the content to be printed. For example, you can change **OHOS** to **World**. You can use either C or C++ to develop a program. +1. Create a directory and the program source code. -``` -#include -#include "los_sample.h" + Create the **applications/sample/camera/apps/src/helloworld.c** directory and file whose code is shown in the following example. You can customize the content to be printed. For example, you can change **OHOS** to **World**. You can use either C or C++ to develop a program. -int main(int argc, char **argv) -{ - printf("\n************************************************\n"); - printf("\n\t\tHello OHOS!\n"); - printf("\n************************************************\n\n"); + ``` + #include + + int main(int argc, char **argv) + { + printf("\n************************************************\n"); + printf("\n\t\tHello OHOS!\n"); + printf("\n************************************************\n\n"); + + return 0; + } + ``` + +2. Create a build file. + + Create the **applications/sample/camera/apps/BUILD.gn** file. The file content is as follows: + + ``` + import("//build/lite/config/component/lite_component.gni") + lite_component("hello-OHOS") { + features = [ ":helloworld" ] + } + executable("helloworld") { + output_name = "helloworld" + sources = [ "src/helloworld.c" ] + include_dirs = [] + defines = [] + cflags_c = [] + ldflags = [] + } + ``` + +3. Add a new component. + + Add the configuration of the **hello\_world\_app** component to the **build/lite/components/applications.json** file. The sample code below shows some configurations defined in the **applications.json** file, and the code between **\#\#start\#\#** and **\#\#end\#\#** is the new configuration \(Delete the rows where **\#\#start\#\#** and **\#\#end\#\#** are located after the configurations are added.\) + + ``` + { + "components": [ + { + "component": "camera_sample_communication", + "description": "Communication related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/communication" + ], + "targets": [ + "//applications/sample/camera/communication:sample" + ], + "rom": "", + "ram": "", + "output": [], + "adapted_kernel": [ "liteos_a" ], + "features": [], + "deps": { + "components": [], + "third_party": [] + } + }, + ##start## + { + "component": "hello_world_app", + "description": "Communication related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/apps" + ], + "targets": [ + "//applications/sample/camera/apps:hello-OHOS" + ], + "rom": "", + "ram": "", + "output": [], + "adapted_kernel": [ "liteos_a" ], + "features": [], + "deps": { + "components": [], + "third_party": [] + } + }, + ##end## + { + "component": "camera_sample_app", + "description": "Camera related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/launcher", + "applications/sample/camera/cameraApp", + "applications/sample/camera/setting", + "applications/sample/camera/gallery", + "applications/sample/camera/media" + ], + ``` + +4. Modify the board configuration file. + + Add the **hello\_world\_app** component to the **vendor/hisilicon/hispark\_taurus/config.json** file. The sample code below shows the configurations of the **applications** subsystem, and the code between **\#\#start\#\#** and **\#\#end\#\#** is the new configuration \(Delete the rows where **\#\#start\#\#** and **\#\#end\#\#** are located after the configurations are added.\) + + ``` + { + "subsystem": "applications", + "components": [ + { "component": "camera_sample_app", "features":[] }, + { "component": "camera_sample_ai", "features":[] }, + ##start## + { "component": "hello_world_app", "features":[] }, + ##end## + { "component": "camera_screensaver_app", "features":[] } + ] + }, + ``` - LOS_Sample(g_num); - - return 0; -} -``` ## Building @@ -45,7 +144,7 @@ hb build -f (Start building.) The result files are generated in the **out/hispark\_taurus/ipcamera\_hispark\_taurus** directory. >![](public_sys-resources/icon-notice.gif) **NOTICE:** ->The U-boot file of the Hi3516 development board can be obtained from the following path: vendor\\hisi\\hi35xx\\hi3516dv300\\uboot\\out\\boot\\u-boot-hi3516dv300.bin +>The U-boot file of the Hi3516D V300 development board can be obtained from the following path: device/hisilicon/hispark\_taurus/sdk\_liteos/uboot/out/boot/u-boot-hi3516dv300.bin ## Burning @@ -71,32 +170,33 @@ The Hi3516 development board allows you to burn flash memory over the USB port, ![](figures/en-us_image_0000001078081434.png) -5. Set the IP address of the network port. You are advised to set the local TCP/IPv4 address on your PC and then set the following options: +5. Check and set the IP address of the network adapter connected to the development board. For details, see [Setting the IP Address of the Network Port for Programming on Hi3516](https://device.harmonyos.com/en/docs/ide/user-guides/set_ipaddress-0000001141825075). +6. Set the IP address of the network port for programming: - - **upload\_net\_server\_ip**: Select the IP address of your PC, such as 192.168.1.2. + - **upload\_net\_server\_ip**: Select the IP address set in [5](#en-us_topic_0000001056443961_li1558813168234), such as 192.168.1.2. - **upload\_net\_client\_mask**: Set the subnet mask of the development board, such as 255.255.255.0. Once the **upload\_net\_server\_ip** field is set, this field will be automatically populated. - **upload\_net\_client\_gw**: Set the gateway of the development board, such as 192.168.1.1. Once the **upload\_net\_server\_ip** field is set, this field will be automatically populated. - **upload\_net\_client\_ip**: Set the IP address of the development board, such as 92.168.1.3. Once the **upload\_net\_server\_ip** field is set, this field will be automatically populated. ![](figures/en-us_image_0000001078096426.png) -6. Switch between the **hi3516dv300\_fastboothi3516dv300\_kernel**, **hi3516dv300\_rootfs**, and **hi3516dv300\_userfs** tab pages, and modify the settings. In general cases, you can leave the fields at their default settings. To change the default settings, select the target item in the **New Option** field first. +7. Switch between the **hi3516dv300\_fastboothi3516dv300\_kernel**, **hi3516dv300\_rootfs**, and **hi3516dv300\_userfs** tab pages, and modify the settings. In general cases, you can leave the fields at their default settings. To change the default settings, select the target item in the **New Option** field first. ![](figures/2021-01-28_112953.png) -7. When you finish modifying, click **Save** in the upper right corner. +8. When you finish modifying, click **Save** in the upper right corner. - ![](figures/2021-01-27_170334-0.png) + ![](figures/2021-01-27_170334-2.png) -8. Open the project file and go to ![](figures/2021-01-27_170334-1.png) \> **PROJECT TASKS** \> **env:hi3516dv300** \> **Upload** to start programming. +9. Open the project file and go to ![](figures/2021-01-27_170334-3.png) \> **PROJECT TASKS** \> **env:hi3516dv300** \> **Upload** to start programming. ![](figures/2021-01-27_181244.png) -9. When the following message is displayed, power off the development board and then power it on. +10. When the following message is displayed, power off the development board and then power it on. ![](figures/en-us_image_0000001097124071.png) -10. Start programming. When the following message is displayed, it indicates that the programming is successful. +11. Start programming. When the following message is displayed, it indicates that the programming is successful. ![](figures/en-us_image_0000001072956053.png) @@ -113,14 +213,14 @@ The Hi3516 development board allows you to burn flash memory over the USB port, ![](figures/chuankou1.png) - 1. Click **Serial port** to enable it. - 2. Enter the serial port number queried in the "Burning" section \(COM11 is used in this example\) and press **Enter** until **hisillicon** is displayed. + 1. Click **Monitor** to enable the serial port. + 2. Press **Enter** repeatedly until **hisilicon** displays. 3. Go to step [2](#l5b42e79a33ea4d35982b78a22913b0b1) if the board is started for the first time or the startup parameters need to be modified; go to step [3](#ld26f18828aa44c36bfa36be150e60e49) otherwise. 2. \(Mandatory when the board is started for the first time\) Modify the bootcmd and bootargs parameters of U-boot. You need to perform this step only once if the parameters need not to be modified during the operation. The board automatically starts after it is reset. >![](public_sys-resources/icon-notice.gif) **NOTICE:** - >The default waiting time in the U-boot is 2s. You can press **Enter** to interrupt the waiting and run the **reset** command to restart the system after "hisillicon" is displayed. + >The default waiting time in the U-boot is 2s. You can press **Enter** to interrupt the waiting and run the **reset** command to restart the system after "hisilicon" is displayed. **Table 1** Parameters of the U-boot @@ -168,10 +268,8 @@ The Hi3516 development board allows you to burn flash memory over the USB port, ## Running a Program -In the root directory, run the **./bin/camera\_app** command to operate the demo program. The compilation result is shown in the following example. - -**Figure 4** Program started successfully - +In the root directory, run the **./bin/helloworld** command to operate the demo program. The compilation result is shown in the following example. -![](figures/qidong.png) +**Figure 4** Successful system startup and program execution +![](figures/successful-system-startup-and-program-execution.png "successful-system-startup-and-program-execution") diff --git a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3518.md b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3518.md index 2ad46d168b6ec6024a74d396ee815fc5b8234b97..726a2232a3cf23af468bd32ce8b42c7c5c7faa5b 100644 --- a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3518.md +++ b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3518.md @@ -1,32 +1,130 @@ # Developing the First Example Program Running on Hi3518 -- [Modifying a Program](#s8efc1952ebfe4d1ea717182e108c29bb) +- [Creating a Program](#section20460103116446) - [Building](#section234175193114) - [Burning](#section57955241588) - [Running an Image](#section62131033183710) - [Follow-up Learning](#section9712145420182) -This section describes how to modify, compile, burn, and run the first program on the board, and finally print **Hello OHOS!**. +This section describes how to create, compile, burn, and run the first program, and finally print **Hello OHOS!** on the develop board. -## Modifying a Program +## Creating a Program -The following example shows the **helloworld.c** code in the **applications/sample/camera/app/src** directory. You can customize the content to be printed. For example, you can change OHOS to World. You can use either ISO C or C++ to develop a program. +1. Create a directory and the program source code. -``` -#include -#include "los_sample.h" - -int main(int argc, char **argv) -{ - printf("\n************************************************\n"); - printf("\n\t\tHello OHOS!\n"); - printf("\n************************************************\n\n"); + Create the **applications/sample/camera/apps/src/helloworld.c** directory and file whose code is shown in the following example. You can customize the content to be printed. For example, you can change **OHOS** to **World**. You can use either C or C++ to develop a program. - LOS_Sample(g_num); + ``` + #include + + int main(int argc, char **argv) + { + printf("\n************************************************\n"); + printf("\n\t\tHello OHOS!\n"); + printf("\n************************************************\n\n"); + + return 0; + } + ``` + +2. Create a build file. + + Create the **applications/sample/camera/apps/BUILD.gn** file. The file content is as follows: + + ``` + import("//build/lite/config/component/lite_component.gni") + lite_component("hello-OHOS") { + features = [ ":helloworld" ] + } + executable("helloworld") { + output_name = "helloworld" + sources = [ "src/helloworld.c" ] + include_dirs = [] + defines = [] + cflags_c = [] + ldflags = [] + } + ``` + +3. Add a new component. + + Add the configuration of the **hello\_world\_app** component to the **build/lite/components/applications.json** file. The sample code below shows some configurations defined in the **applications.json** file, and the code between **\#\#start\#\#** and **\#\#end\#\#** is the new configuration \(Delete the rows where **\#\#start\#\#** and **\#\#end\#\#** are located after the configurations are added.\) + + ``` + { + "components": [ + { + "component": "camera_sample_communication", + "description": "Communication related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/communication" + ], + "targets": [ + "//applications/sample/camera/communication:sample" + ], + "rom": "", + "ram": "", + "output": [], + "adapted_kernel": [ "liteos_a" ], + "features": [], + "deps": { + "components": [], + "third_party": [] + } + }, + ##start## + { + "component": "hello_world_app", + "description": "Communication related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/apps" + ], + "targets": [ + "//applications/sample/camera/apps:hello-OHOS" + ], + "rom": "", + "ram": "", + "output": [], + "adapted_kernel": [ "liteos_a" ], + "features": [], + "deps": { + "components": [], + "third_party": [] + } + }, + ##end## + { + "component": "camera_sample_app", + "description": "Camera related samples.", + "optional": "true", + "dirs": [ + "applications/sample/camera/launcher", + "applications/sample/camera/cameraApp", + "applications/sample/camera/setting", + "applications/sample/camera/gallery", + "applications/sample/camera/media" + ], + ``` + +4. Modify the board configuration file. + + Add the **hello\_world\_app** component to the **vendor/hisilicon/hispark\_aries/config.json** file. The sample code below shows the configurations of the **applications** subsystem, and the code between **\#\#start\#\#** and **\#\#end\#\#** is the new configuration \(Delete the rows where **\#\#start\#\#** and **\#\#end\#\#** are located after the configurations are added.\) + + ``` + { + "subsystem": "applications", + "components": [ + ##start## + { "component": "hello_world_app", "features":[] }, + ##end## + { "component": "camera_sample_app", "features":[] } + + ] + }, + ``` - return 0; -} -``` ## Building @@ -42,10 +140,10 @@ hb build -f (Start building.) The result files are generated in the **out/hispark\_aries/ipcamera\_hispark\_aries** directory. **Figure 1** Settings -![](figures/settings-2.png "settings-2") +![](figures/settings-4.png "settings-4") >![](public_sys-resources/icon-notice.gif) **NOTICE:** ->The U-boot file of the Hi3518 development board can be obtained from the following path: vendor\\hisi\\hi35xx\\hi3518ev300\\uboot\\out\\boot\\u-boot-hi3518ev300.bin +>The U-boot file of the Hi3518E V300 development board can be obtained from the following path: device/hisilicon/hispark\_aries/sdk\_liteos/uboot/out/boot/u-boot-hi3518ev300.bin ## Burning @@ -73,13 +171,13 @@ The USB port is the only burning mode supported by the Hi3518 development board. 5. Switch between the **hi3518ev300\_fastboot**, **hi3518ev300\_kernel**, **hi3518ev300\_rootfs**, and **hi3518ev300\_userfs** tab pages, and modify the settings. In general cases, you can leave the fields at their default settings. To change the default settings, select the target item in the **New Option** field first. - ![](figures/2021-01-28_112953-3.png) + ![](figures/2021-01-28_112953-5.png) 6. When you finish modifying, click **Save** in the upper right corner. - ![](figures/2021-01-27_170334-4.png) + ![](figures/2021-01-27_170334-6.png) -7. Open the project file, go to ![](figures/2021-01-27_170334-5.png) \> **PROJECT TASKS** \> **partition:hi3518ev300\_fastboot** \> **Erase** to erase U-boot. +7. Open the project file, go to ![](figures/2021-01-27_170334-7.png) \> **PROJECT TASKS** \> **partition:hi3518ev300\_fastboot** \> **Erase** to erase U-boot. ![](figures/2021-01-27_181047.png) @@ -110,10 +208,10 @@ The USB port is the only burning mode supported by the Hi3518 development board. **Figure 2** Serial port connection - ![](figures/chuankou1-6.png) + ![](figures/chuankou1-8.png) - 1. Click **Serial port** to enable it. - 2. Enter the serial port number queried in the "Burning" section \(COM11 is used in this example\) and press **Enter** until **hisillicon** is displayed. + 1. Click **Monitor** to enable the serial port. The **TERMINAL** window is displayed. + 2. Press **Enter** repeatedly until **hisilicon** displays. 3. Go to [step 2](#li9441185382314) if the board is started for the first time or the startup parameters need to be modified; go to [step 3](#li6442853122312) otherwise. 2. \(Mandatory for the first burning\) Modify the **bootcmd** and **bootargs** parameters of U-boot. This step is a fixed operation and the result can be saved. However, you need to perform the following steps again if U-boot needs to be reburnt. @@ -158,10 +256,10 @@ The USB port is the only burning mode supported by the Hi3518 development board. >![](public_sys-resources/icon-notice.gif) **NOTICE:** >**go 0x40000000** \(optional\) indicates that the command is fixed in the startup parameters by default and the board automatically starts after it is reset. If you want to manually start the board, press **Enter** in the countdown phase of the U-boot startup to interrupt the automatic startup. -3. If **hisilicon \#** is displayed during the startup, run the **reset** command. After the system automatically starts and **OHOS** is displayed, run the **./bin/camera\_app** command and then press **Enter**. The system is started successfully if information shown in the following figure is displayed. +3. If **hisilicon \#** is displayed during the startup, run the **reset** command. After the system automatically starts and **OHOS** is displayed, run the **./bin/helloworld** command and then press **Enter**. The system is started successfully if information shown in the following figure is displayed. - **Figure 3** Successful system startup and program execution - ![](figures/successful-system-startup-and-program-execution.png "successful-system-startup-and-program-execution") + **Figure 3** Successful system startup and program execution + ![](figures/successful-system-startup-and-program-execution-9.png "successful-system-startup-and-program-execution-9") ## Follow-up Learning diff --git a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3861.md b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3861.md index c99d578c26472dbef72ab42b257caeca32db0109..9402a87bbf5ec7187c66181cd1eeb983933a8466 100644 --- a/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3861.md +++ b/en/device-dev/quick-start/developing-the-first-example-program-running-on-hi3861.md @@ -1,12 +1,12 @@ # Developing the First Example Program Running on Hi3861 -- [Building](#section1736014117148) +- [Building](#section191121332125319) - [Burning Images](#section1610612214150) - [Connecting WLAN Module to the Internet](#section168257461059) This example shows how to connect the WLAN module to the gateway using attention \(AT\) commands. -## Building +## Building This section describes how to perform the WLAN module building on a Linux server. @@ -17,35 +17,35 @@ If the Linux environment is installed using Docker, perform the building by refe **Figure 1** Starting the IDE terminal tool - ![](figures/en-us_image_0000001055040538.png) + ![](figures/1.png) - On the TERMINAL page, run the ssh command, for example, **ssh** **_user_@_ipaddr_**, to connect to the Linux server. + On the **TERMINAL** panel, run the ssh command, for example, **ssh** **_user_@_ipaddr_**, to connect to the Linux server. - **Figure 2** TERMINAL page + **Figure 2** TERMINAL panel - ![](figures/en-us_image_0000001054599199.png) + ![](figures/2.png) -2. Go to the root directory of the code, run the **hb set** and **.** commands on TERMINAL page, and select the **wifiiot\_hispark\_pegasus@hisilicon** version. +2. Go to the root directory of the code, run the **hb set** and **.** commands on the **TERMINAL** panel, and select the **wifiiot\_hispark\_pegasus** version. **Figure 3** Selecting the target build version - ![](figures/en-us_image_0000001078527924.png) + ![](figures/3.png) 3. Run the **hb build** command to start building. - **Figure 4** Running commands on TERMINAL page + **Figure 4** Running commands on the TERMINAL panel - ![](figures/en-us_image_0000001123445553.png) + ![](figures/4.png) 4. Check whether the building is successful. If yes, **wifiiot\_hispark\_pegasus build success** will be displayed, as shown in the following figure. **Figure 5** Successful building - ![](figures/en-us_image_0000001123361875.png) + ![](figures/5.png) 5. Check whether the following files are generated in the **./out/wifiiot/** directory. @@ -56,82 +56,73 @@ If the Linux environment is installed using Docker, perform the building by refe **Figure 6** Directory for storing the generated files - ![](figures/en-us_image_0000001078528390.png) + ![](figures/3-0.png) ## Burning Images You can use the DevEco tool to perform the image burning of the Hi3861 WLAN module. For details about how to use the tool, see [HUAWEI DevEco Device Tool User Guide](https://device.harmonyos.com/en/docs/ide/user-guides/service_introduction-0000001050166905). -1. Use a USB cable to connect the Windows workstation to the Hi3861 development board. -2. Download and install the [USB-to-Serial port driver](http://www.wch-ic.com/downloads/CH341SER_EXE.html). -3. Query the COM port on the device manager, for example, CH340\(COM11\). The serial port integrates functions such as code burning, log printing, and AT commands execution. +1. Connect the PC and the target development board through the USB port. For details, please refer to [Introduction to the Hi3861 Development Board](https://device.harmonyos.com/en/docs/start/introduce/oem_wifi_start_des-0000001050168548). +2. Open Device Manager, then check and record the serial port number corresponding to the development board. - **Figure 7** COM port of the device manager - ![](figures/com-port-of-the-device-manager.png "com-port-of-the-device-manager") + >![](public_sys-resources/icon-note.gif) **NOTE:** + >If the serial port number is not displayed correctly, follow the steps described in [Installing the Serial Port Driver on the Hi3861 Series Development Boards](https://device.harmonyos.com/cn/docs/ide/user-guides/hi3861-drivers-0000001058153433). -4. Enter the burning configuration page. + ![](figures/en-us_image_0000001073388838.png) - **Figure 8** Basic configurations for image burning - +3. Open DevEco Device Tool and go to **Projects** \> **Settings**. - ![](figures/en-us_image_0000001054877726.png) + ![](figures/en-us_image_0000001078404538.png) -5. Set basic parameters. +4. On the **hi3861** tab page, set the programming options. - 1. Set a proper baud rate. A higher baud rate indicates a faster burning speed. Here the default value **921600** is recommended. - 2. Select a data bit. The default value of **Data bit** for the WLAN module is **8**. - 3. Select the version package path **./out/wifiiot/Hi3861\_wifiiot\_app\_allinone.bin** and **Hiburn** mode. - 4. Click **Save** to save configurations. + - **upload\_port**: Select the serial port number obtained in step [2](#en-us_topic_0000001056563976_li848662117291). + - **upload\_protocol**: Select the programming protocol **burn-serial**. + - **upload\_partitions**: Select the file to be programmed. **hi3861\_app** is selected by default. - **Figure 9** Baud rate and data bit configurations - ![](figures/baud-rate-and-data-bit-configurations.png "baud-rate-and-data-bit-configurations") + ![](figures/en-us_image_0000001078244328.png) - **Figure 10** Path of the burning package - +5. Modify the settings of the **hi3861\_app** file. In general cases, you can leave the fields at their default settings. To change the default settings, select the target item in the **New Option** field first. - ![](figures/en-us_image_0000001055427138.png) + ![](figures/en-us_image_0000001120802173.png) -6. On the DevEco, click **Burn** ![](figures/en-us_image_0000001054443694.png) and select the serial port **COM11**. +6. When you finish modifying, click **Save** in the upper right corner. - **Figure 11** Starting a burning - ![](figures/starting-a-burning.png "starting-a-burning") + ![](figures/en-us_image_0000001078313582.png) -7. After the serial port is selected, **Connecting, please reset device...** is shown below the **TERMINAL** tab, indicating that the module is in the to-be-burnt state. +7. Open the project file. In the DevEco Device Tool window, go to **PROJECT TASKS** \> **env:hi3861** \> **Upload** to start programming. - **Figure 12** Burning process - ![](figures/burning-process.png "burning-process") + ![](figures/en-us_image_0000001120802383.png) -8. Press the **Reset** key on the module to start burning. **Execution Successful** displayed below the **TERMINAL** tab indicates the burning is complete. +8. When the following information is displayed, press the RST button on the development board to restart it. - **Figure 13** Burning completed - + ![](figures/en-us_image_0000001074285712.png) - ![](figures/en-us_image_0000001054802306.png) +9. Start programming. When the following message is displayed, it indicates that the programming is successful. + + ![](figures/en-us_image_0000001074445364.png) ## Connecting WLAN Module to the Internet After completing version building and burning, do as follows to connect the WLAN module to the Internet using AT commands. -1. Keep Windows workstation connected to the WLAN module and click **Serial port** at the bottom of DevEco to view the configuration page. - - **Figure 14** Opening the DevEco serial port - ![](figures/opening-the-deveco-serial-port.png "opening-the-deveco-serial-port") +1. Click the icon of **DevEco: Serial Monitor** at the bottom of DevEco Studio to keep the connection between the Windows workstation and the WLAN module. -2. Select the serial port and set parameters. Enter the actual serial port number. Here the serial port number is **COM11**; the default values of Baud rate, Data bit, and Stop bit are used; **1** is used as the end-line character since a valid input AT command must end with **\\r\\n**. + **Figure 7** Opening the DevEco serial port + - **Figure 15** Setting serial port parameters - ![](figures/setting-serial-port-parameters.png "setting-serial-port-parameters") + ![](figures/5-1.png) -3. Reset the WLAN module. The message **ready to OS start** is displayed on the terminal page, indicating that the WLAN module is started successfully. +2. Reset the WLAN module. The message **ready to OS start** is displayed on the **TERMINAL** panel, indicating that the WLAN module is started successfully. - **Figure 16** Successful resetting of the WLAN module + **Figure 8** Successful resetting of the WLAN module - ![](figures/3.png) + ![](figures/6.png) -4. Run the following AT commands in sequence via the DevEco serial port terminal to start the STA mode, connect to the specified AP, and enable Dynamic Host Configuration Protocol \(DHCP\). +3. Run the following AT commands in sequence via the DevEco serial port terminal to start the STA mode, connect to the specified AP, and enable Dynamic Host Configuration Protocol \(DHCP\). ``` AT+STARTSTA # Start the STA mode. @@ -142,16 +133,16 @@ After completing version building and burning, do as follows to connect the WLAN AT+DHCP=wlan0,1 # Request the IP address of wlan0 from the AP using DHCP. ``` -5. Check whether the WLAN module is properly connected to the gateway, as shown in the following figure. +4. Check whether the WLAN module is properly connected to the gateway, as shown in the following figure. ``` AT+IFCFG # View the IP address assigned to an interface of the module. AT+PING=X.X.X.X # Check the connectivity between the module and the gateway. Replace X.X.X.X with the actual gateway address. ``` - **Figure 17** Successful networking of the WLAN module + **Figure 9** Successful networking of the WLAN module - ![](figures/4.png) + ![](figures/截图.png) diff --git a/en/device-dev/quick-start/faq-on-hi3516.md b/en/device-dev/quick-start/faq-on-hi3516.md index d717de4c1f60cf827eb7455d95439f59669d4d9a..508dac8dd2fcbf8dd1305e867a25c7d3cc6d7ad1 100644 --- a/en/device-dev/quick-start/faq-on-hi3516.md +++ b/en/device-dev/quick-start/faq-on-hi3516.md @@ -157,8 +157,8 @@ >![](public_sys-resources/icon-notice.gif) **NOTICE:** >The U-boot file of the two boards can be obtained from the following paths, respectively. - >- Hi3516D V300: vendor\\hisi\\hi35xx\\hi3516dv300\\uboot\\out\\boot\\u-boot-hi3516dv300.bin - >- Hi3518E V300: vendor\\hisi\\hi35xx\\hi3518ev300\\uboot\\out\\boot\\u-boot-hi3518ev300.bin + >Hi3516D V300: **device\\hisilicon\\hispark\_taurus\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3516dv300.bin** + >Hi3518E V300: **device\\hisilicon\\hispark\_aries\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3518ev300.bin** 2. Burn the U-boot file by following the procedures for burning a U-boot file over USB. diff --git a/en/device-dev/quick-start/faq-on-hi3518.md b/en/device-dev/quick-start/faq-on-hi3518.md index 2684241e92473ecea6c67bb36b808af8f7f58db6..969eee80f8a495d1a61390ba582cb40b317bc152 100644 --- a/en/device-dev/quick-start/faq-on-hi3518.md +++ b/en/device-dev/quick-start/faq-on-hi3518.md @@ -160,8 +160,8 @@ >![](public_sys-resources/icon-notice.gif) **NOTICE:** >The U-boot file of the two boards can be obtained from the following paths, respectively. - >- Hi3516D V300: vendor\\hisi\\hi35xx\\hi3516dv300\\uboot\\out\\boot\\u-boot-hi3516dv300.bin - >- Hi3518E V300: vendor\\hisi\\hi35xx\\hi3518ev300\\uboot\\out\\boot\\u-boot-hi3518ev300.bin + >Hi3516D V300: **device\\hisilicon\\hispark\_taurus\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3516dv300.bin** + >Hi3518E V300: **device\\hisilicon\\hispark\_aries\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3518ev300.bin** 2. Burn the U-boot file by following the procedures for burning a U-boot file over USB. diff --git a/en/device-dev/quick-start/faq-on-hi3861.md b/en/device-dev/quick-start/faq-on-hi3861.md index 01d9ea24db20ed95ab1630eaaa1e9c6d31842f89..24e3eab35d69c819b6d3889d6747f89f261ac6a3 100644 --- a/en/device-dev/quick-start/faq-on-hi3861.md +++ b/en/device-dev/quick-start/faq-on-hi3861.md @@ -1,15 +1,15 @@ # FAQ on Hi3861 -- [What should I do when the message is displayed during Python 3 installation?](#section1221016541119) -- [What should I do when the message is displayed during Python 3 installation?](#section1913477181213) -- [What should I do when the message is displayed during Python 3 installation?](#section108211415131210) -- [What should I do when the message is displayed during Python 3 installation?](#section2062268124) -- [What should I do when the message is displayed during compilation and building?](#section982315398121) -- [What should I do when the message is displayed during compilation and building?](#section102035451216) -- [What should I do when the message is displayed during compilation and building?](#section4498158162320) -- [What should I do when the message is displayed during compilation and building?](#section11181036112615) +- [What should I do when the message configure: error: no acceptable C compiler found in $PATH is displayed during Python 3 installation?](#section1221016541119) +- [What should I do when the message -bash: make: command not found is displayed during Python 3 installation?](#section1913477181213) +- [What should I do when the message zlib not available is displayed during Python 3 installation?](#section108211415131210) +- [What should I do when the message No module named '\_ctypes' is displayed during Python 3 installation?](#section2062268124) +- [What should I do when the message No module named 'Crypto' is displayed during compilation and building?](#section982315398121) +- [What should I do when the message No module named 'ecdsa' is displayed during compilation and building?](#section102035451216) +- [What should I do when the message Could not find a version that satisfies the requirement six\>=1.9.0 is displayed during compilation and building?](#section4498158162320) +- [What should I do when the message cannot find -lgcc is displayed during compilation and building?](#section11181036112615) - [What should I do when the message indicating Python cannot be found is displayed during compilation and building?](#section1571810194619) -- [What should I do when an error with occurs during installation?](#section691681635814) +- [What should I do when an error with lsb\_release occurs during kconfiglib installation?](#section691681635814) ## What should I do when the message **configure: error: no acceptable C compiler found in $PATH** is displayed during Python 3 installation? diff --git a/en/device-dev/quick-start/figures/1.png b/en/device-dev/quick-start/figures/1.png new file mode 100644 index 0000000000000000000000000000000000000000..791dfeae272070b7e285ea3070ebd3b1e9100eb5 Binary files /dev/null and b/en/device-dev/quick-start/figures/1.png differ diff --git a/en/device-dev/quick-start/figures/2.png b/en/device-dev/quick-start/figures/2.png new file mode 100644 index 0000000000000000000000000000000000000000..360114c797c42340cdeadcb566a7d90651cd12de Binary files /dev/null and b/en/device-dev/quick-start/figures/2.png differ diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334-0.png b/en/device-dev/quick-start/figures/2021-01-27_170334-0.png deleted file mode 100644 index 1e7dd2cdb515e871a1c5d34b3332b097bc02351b..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/2021-01-27_170334-0.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334-2.png b/en/device-dev/quick-start/figures/2021-01-27_170334-2.png index 5b573a4ddfe89fe25cb1b567736823244fdb9e97..87cb2f11978845b4fcbeda047fa6e464f9c1b658 100644 Binary files a/en/device-dev/quick-start/figures/2021-01-27_170334-2.png and b/en/device-dev/quick-start/figures/2021-01-27_170334-2.png differ diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-1.png b/en/device-dev/quick-start/figures/2021-01-27_170334-3.png similarity index 100% rename from zh-cn/device-dev/quick-start/figures/2021-01-27_170334-1.png rename to en/device-dev/quick-start/figures/2021-01-27_170334-3.png diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334-4.png b/en/device-dev/quick-start/figures/2021-01-27_170334-6.png similarity index 100% rename from en/device-dev/quick-start/figures/2021-01-27_170334-4.png rename to en/device-dev/quick-start/figures/2021-01-27_170334-6.png diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-5.png b/en/device-dev/quick-start/figures/2021-01-27_170334-7.png similarity index 100% rename from zh-cn/device-dev/quick-start/figures/2021-01-27_170334-5.png rename to en/device-dev/quick-start/figures/2021-01-27_170334-7.png diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334.png b/en/device-dev/quick-start/figures/2021-01-27_170334.png index 5b573a4ddfe89fe25cb1b567736823244fdb9e97..1e7dd2cdb515e871a1c5d34b3332b097bc02351b 100644 Binary files a/en/device-dev/quick-start/figures/2021-01-27_170334.png and b/en/device-dev/quick-start/figures/2021-01-27_170334.png differ diff --git a/en/device-dev/quick-start/figures/2021-01-28_112953-3.png b/en/device-dev/quick-start/figures/2021-01-28_112953-5.png similarity index 100% rename from en/device-dev/quick-start/figures/2021-01-28_112953-3.png rename to en/device-dev/quick-start/figures/2021-01-28_112953-5.png diff --git a/en/device-dev/quick-start/figures/3-0.png b/en/device-dev/quick-start/figures/3-0.png new file mode 100644 index 0000000000000000000000000000000000000000..f354b2d27ce06bd5af6a8702c0894bf5c50a97bb Binary files /dev/null and b/en/device-dev/quick-start/figures/3-0.png differ diff --git a/en/device-dev/quick-start/figures/3.png b/en/device-dev/quick-start/figures/3.png index 3b767f744e6e05e12017fdf155957511814931b7..91f3fa22153f501e308fab46f92f2e95995f1917 100644 Binary files a/en/device-dev/quick-start/figures/3.png and b/en/device-dev/quick-start/figures/3.png differ diff --git a/en/device-dev/quick-start/figures/4.png b/en/device-dev/quick-start/figures/4.png index 8ab67d9dc25c3fbb4c6d1ae1c719adfdc4d82bfe..3f5fa2829949e59d498da9dd5ff1f48fa0647cf1 100644 Binary files a/en/device-dev/quick-start/figures/4.png and b/en/device-dev/quick-start/figures/4.png differ diff --git a/en/device-dev/quick-start/figures/5-1.png b/en/device-dev/quick-start/figures/5-1.png new file mode 100644 index 0000000000000000000000000000000000000000..8c6ec0adb87f693519f0e3b00b3aa7053f3e23ae Binary files /dev/null and b/en/device-dev/quick-start/figures/5-1.png differ diff --git a/en/device-dev/quick-start/figures/5.png b/en/device-dev/quick-start/figures/5.png new file mode 100644 index 0000000000000000000000000000000000000000..f3a76a6922315fe595ae4214331ce322766b3b48 Binary files /dev/null and b/en/device-dev/quick-start/figures/5.png differ diff --git a/en/device-dev/quick-start/figures/6.png b/en/device-dev/quick-start/figures/6.png new file mode 100644 index 0000000000000000000000000000000000000000..9d3bdbfe1eac9dc532496a7785e8caf99c41780b Binary files /dev/null and b/en/device-dev/quick-start/figures/6.png differ diff --git a/en/device-dev/quick-start/figures/baud-rate-and-data-bit-configurations.png b/en/device-dev/quick-start/figures/baud-rate-and-data-bit-configurations.png deleted file mode 100644 index 78360310eb26b4a45182f1ccfb8c8b0eb0a8d502..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/baud-rate-and-data-bit-configurations.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/burning-process.png b/en/device-dev/quick-start/figures/burning-process.png deleted file mode 100644 index bfcf51b66132ab2e9bca3c795c5332a923d3f69a..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/burning-process.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/chuankou1-6.png b/en/device-dev/quick-start/figures/chuankou1-6.png deleted file mode 100644 index 485cb3054c0c08edd6738256f27ad629ce65e1d7..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/chuankou1-6.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/chuankou1-8.png b/en/device-dev/quick-start/figures/chuankou1-8.png new file mode 100644 index 0000000000000000000000000000000000000000..8eb26425f53028a08eb40e3037ecd302f3082270 Binary files /dev/null and b/en/device-dev/quick-start/figures/chuankou1-8.png differ diff --git a/en/device-dev/quick-start/figures/chuankou1.png b/en/device-dev/quick-start/figures/chuankou1.png index 485cb3054c0c08edd6738256f27ad629ce65e1d7..063a5ff561d4a29f48744c3133724eb6b45e8a47 100644 Binary files a/en/device-dev/quick-start/figures/chuankou1.png and b/en/device-dev/quick-start/figures/chuankou1.png differ diff --git a/en/device-dev/quick-start/figures/com-port-of-the-device-manager.png b/en/device-dev/quick-start/figures/com-port-of-the-device-manager.png deleted file mode 100644 index c6538531a9a0e9bd1954599e7a3e76c598b79796..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/com-port-of-the-device-manager.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001054443694.png b/en/device-dev/quick-start/figures/en-us_image_0000001054443694.png deleted file mode 100644 index fcc8a1c4685b41711401ef49cf0221e1c04fe8c4..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001054443694.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001054599199.png b/en/device-dev/quick-start/figures/en-us_image_0000001054599199.png deleted file mode 100644 index 836bb759fa5ea304dca1443148e46374284f6f77..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001054599199.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001054802306.png b/en/device-dev/quick-start/figures/en-us_image_0000001054802306.png deleted file mode 100644 index 6c7a92b0134c9b43f3bfdd3b343c4faa37c39827..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001054802306.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001054877726.png b/en/device-dev/quick-start/figures/en-us_image_0000001054877726.png deleted file mode 100644 index 61310f66f1d85e4300d563de29759241db52cf70..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001054877726.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001055040538.png b/en/device-dev/quick-start/figures/en-us_image_0000001055040538.png deleted file mode 100644 index f927ac94566b35c9d8deb4a07c767bb2811c5214..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001055040538.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001055427138.png b/en/device-dev/quick-start/figures/en-us_image_0000001055427138.png deleted file mode 100644 index 8c1b5d1af9f49d9d8a00602e0a658fcb6123cd71..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001055427138.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001078527924.png b/en/device-dev/quick-start/figures/en-us_image_0000001078527924.png deleted file mode 100644 index 365f9bd4091c4a7100170959194a9b4cc4dcf4c3..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001078527924.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001078528390.png b/en/device-dev/quick-start/figures/en-us_image_0000001078528390.png deleted file mode 100644 index 759f7560a89419c786c9018298dbd45a05237aa3..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001078528390.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001123361875.png b/en/device-dev/quick-start/figures/en-us_image_0000001123361875.png deleted file mode 100644 index f35e9fdf0fd2acfd41f29a65254bddf84019192d..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001123361875.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/en-us_image_0000001123445553.png b/en/device-dev/quick-start/figures/en-us_image_0000001123445553.png deleted file mode 100644 index 450ee24afd038eb5defd235321385743ef295f9e..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/en-us_image_0000001123445553.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/failed-to-open-the-serial-port.png b/en/device-dev/quick-start/figures/failed-to-open-the-serial-port.png index 8fd80e5c67d804c3e03623a257d6ef3601fef81b..25308b9cab52a166955e70ada35c3191d90dd64c 100644 Binary files a/en/device-dev/quick-start/figures/failed-to-open-the-serial-port.png and b/en/device-dev/quick-start/figures/failed-to-open-the-serial-port.png differ diff --git a/en/device-dev/quick-start/figures/opening-the-deveco-serial-port.png b/en/device-dev/quick-start/figures/opening-the-deveco-serial-port.png deleted file mode 100644 index 2a375124a6b7fa03d463d869b788980865ab557d..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/opening-the-deveco-serial-port.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/qidong.png b/en/device-dev/quick-start/figures/qidong.png deleted file mode 100644 index d8eb0956bcb630fe89454c10e77289c6449a818d..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/qidong.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/setting-serial-port-parameters.png b/en/device-dev/quick-start/figures/setting-serial-port-parameters.png deleted file mode 100644 index 179b1e29bcdd3af8c1947d1f72c90b469c320aa8..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/setting-serial-port-parameters.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/settings-2.png b/en/device-dev/quick-start/figures/settings-4.png similarity index 100% rename from en/device-dev/quick-start/figures/settings-2.png rename to en/device-dev/quick-start/figures/settings-4.png diff --git a/en/device-dev/quick-start/figures/starting-a-burning.png b/en/device-dev/quick-start/figures/starting-a-burning.png deleted file mode 100644 index a157a483dc54a5f8e15f0c4ecfacaaf2c8ce546f..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/starting-a-burning.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/successful-installation.png b/en/device-dev/quick-start/figures/successful-installation.png deleted file mode 100644 index e66ca6ffae9aec5f4f5b97ceccf2e37792e95f18..0000000000000000000000000000000000000000 Binary files a/en/device-dev/quick-start/figures/successful-installation.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/successful-system-startup-and-program-execution-7.png b/en/device-dev/quick-start/figures/successful-system-startup-and-program-execution-9.png similarity index 100% rename from en/device-dev/quick-start/figures/successful-system-startup-and-program-execution-7.png rename to en/device-dev/quick-start/figures/successful-system-startup-and-program-execution-9.png diff --git "a/en/device-dev/quick-start/figures/\346\210\252\345\233\276.png" "b/en/device-dev/quick-start/figures/\346\210\252\345\233\276.png" new file mode 100644 index 0000000000000000000000000000000000000000..ebf4f8eba03720edddfb9ef8eb38bd5f71126f2a Binary files /dev/null and "b/en/device-dev/quick-start/figures/\346\210\252\345\233\276.png" differ diff --git a/en/device-dev/quick-start/setting-up-the-hi3516-development-environment.md b/en/device-dev/quick-start/setting-up-the-hi3516-development-environment.md index 4cab78954efb36f8d7fdc499be3d8d5f96ff0475..e26cc1284928617319ecbf0f9c1161968846e5c9 100644 --- a/en/device-dev/quick-start/setting-up-the-hi3516-development-environment.md +++ b/en/device-dev/quick-start/setting-up-the-hi3516-development-environment.md @@ -90,8 +90,8 @@ The following table describes the tools required for setting up the general envi ## Installing the Linux Compilation Environment >![](public_sys-resources/icon-notice.gif) **NOTICE:** ->- If you acquire the source code using an HPM component or HPM CLI tool, compilation tools like **LLVM** and **hc-gen** are not required. ->- \(Recommended\) If you obtain the source code through an image site or a code repository, install compilation tools like **LLVM** and **hc-gen**. When installing **LLVM** and **hc-gen**, ensure that the environment variable paths of the compilation tools are unique. +>- If you acquire the source code using an HPM component or HPM CLI tool, the compilation tool **hc-gen** is not required. +>- \(Recommended\) If you obtain the source code through an image site or a code repository, you should install the compilation tool **hc-gen**. When installing **hc-gen**, ensure that the environment variable paths of the compilation tools are unique. ### Changing Linux Shell to Bash diff --git a/en/device-dev/quick-start/setting-up-the-hi3518-development-environment.md b/en/device-dev/quick-start/setting-up-the-hi3518-development-environment.md index 5f24dc4b6d0b8c58c8f10a903d35b9c12bdad73b..c1580d76053661c566ca87638c163aba043db491 100644 --- a/en/device-dev/quick-start/setting-up-the-hi3518-development-environment.md +++ b/en/device-dev/quick-start/setting-up-the-hi3518-development-environment.md @@ -81,8 +81,8 @@ The following table describes the tools required for setting up the general envi ## Installing the Linux Compilation Environment >![](public_sys-resources/icon-notice.gif) **NOTICE:** ->- If you acquire the source code using an HPM component or HPM CLI tool, compilation tools like **gn**, **ninja**, **LLVM**, and **hc-gen** are not required. ->- \(Recommended\) If you obtain the source code through an image site or a code repository, compilation tools like **LLVM** and **hc-gen** need to be installed. When installing **LLVM** and **hc-gen**, ensure that the environment variable paths of the compilation tools are unique. +>- If you acquire the source code using an HPM component or HPM CLI tool, the compilation tool **hc-gen** is not required. +>- \(Recommended\) If you obtain the source code through an image site or a code repository, you should install the compilation tool **hc-gen**. When installing **hc-gen**, ensure that the environment variable path of the compilation tool is unique. ### Changing Linux Shell to Bash diff --git a/en/device-dev/quick-start/setting-up-the-hi3861-development-environment.md b/en/device-dev/quick-start/setting-up-the-hi3861-development-environment.md index 11a88450cbffea8dc38f1230b4d278a2c6add611..3154a613bfcf81f9f4fb7b5ad46087c5d8744180 100644 --- a/en/device-dev/quick-start/setting-up-the-hi3861-development-environment.md +++ b/en/device-dev/quick-start/setting-up-the-hi3861-development-environment.md @@ -3,6 +3,7 @@ - [Prerequisites](#section2074878255) - [Requirements Specific to the Hi3861 Development Environment](#section466851916410) - [Installing the Linux Compilation Environment](#section497484245614) +- [Changing Linux Shell to Bash](#section23838991011) - [Installing Basic Software Used for Compilation and Building \(Required Only for Ubuntu 20+\)](#section45512412251) - [Installing Scons](#section13515123015279) - [Installing Python Modules](#section88701892341) @@ -87,6 +88,29 @@ The following table describes the environment configuration requirements specifi >- If you acquire the source code using an HPM component or HPM CLI tool, **gcc\_riscv32** is not required. >- \(Recommended\) If you obtain the source code via the mirror site or code repository, install **gcc\_riscv32**. When installing **gcc\_riscv32**, ensure that the environment variable paths of the compilation tools are unique. +## Changing Linux Shell to Bash + +Check whether bash is used as the shell. + +``` +ls -l /bin/sh +``` + +If **/bin/sh-\>bash** is not displayed, do as follows to change the shell to bash. + +**Method 1:** Run the following command on the terminal and then select **No**. + +``` +sudo dpkg-reconfigure dash +``` + +**Method 2:** Run the first command to delete **/bin/sh** and then run the second command to create a new symbolic link. + +``` +sudo rm -rf /bin/sh +sudo ln -s /bin/bash /bin/sh +``` + ### Installing Basic Software Used for Compilation and Building \(Required Only for Ubuntu 20+\) Install the software. @@ -132,12 +156,12 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get - **Installation package:** 1. Download the **.whl** file \(for example, **kconfiglib-13.2.0-py2.py3-none-any.whl**\). - + Download path: [https://pypi.org/project/kconfiglib\#files](https://pypi.org/project/kconfiglib#files) 1. Install the **.whl** file. - + ``` sudo pip3 install kconfiglib-13.2.0-py2.py3-none-any.whl ``` @@ -161,7 +185,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 1. Install the **.whl** file. - + ``` sudo pip3 install pycryptodome-3.9.9-cp38-cp38-manylinux1_x86_64.whl ``` @@ -178,12 +202,12 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get - **Installation package:** 1. Download the **.whl** file, for example, **six-1.12.0-py2.py3-none-any.whl**. - + Download path: [https://pypi.org/project/six/\#files](https://pypi.org/project/six/#files) 1. Install the **.whl** file. - + ``` sudo pip3 install six-1.12.0-py2.py3-none-any.whl ``` @@ -204,7 +228,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 1. Install the **.whl** file. - + ``` sudo pip3 install ecdsa-0.14.1-py2.py3-none-any.whl ``` @@ -227,7 +251,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 3. Download the RISC-V GNU toolchain. ``` - git clone --recursive https://github.com/riscv/riscv-gnu-toolchain + git clone --recursive https://gitee.com/mirrors/riscv-gnu-toolchain.git ``` 4. Open the **riscv-gnu-toolchain** folder and delete empty folders to prevent conflicts during the download of **Newlib**, **Binutils**, and **GCC**. diff --git "a/zh-cn/device-dev/quick-start/Hi3516\345\270\270\350\247\201\351\227\256\351\242\230.md" "b/zh-cn/device-dev/quick-start/Hi3516\345\270\270\350\247\201\351\227\256\351\242\230.md" index 82f502f2911eac9f6adf637728ef93ac2177f6f8..20f0b4f240fcdb63c05a4bfc969236d2fe9f8ff1 100644 --- "a/zh-cn/device-dev/quick-start/Hi3516\345\270\270\350\247\201\351\227\256\351\242\230.md" +++ "b/zh-cn/device-dev/quick-start/Hi3516\345\270\270\350\247\201\351\227\256\351\242\230.md" @@ -160,8 +160,8 @@ >![](public_sys-resources/icon-notice.gif) **须知：** >单板的U-boot文件请在开源包中获取： - >Hi3516DV300：vendor\\hisi\\hi35xx\\hi3516dv300\\uboot\\out\\boot\\u-boot-hi3516dv300.bin - >Hi3518EV300：vendor\\hisi\\hi35xx\\hi3518ev300\\uboot\\out\\boot\\u-boot-hi3518ev300.bin + >Hi3516DV300：device\\hisilicon\\hispark\_taurus\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3516dv300.bin + >Hi3518EV300：device\\hisilicon\\hispark\_aries\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3518ev300.bin 2. 根据USB烧写步骤烧写U-boot文件。 diff --git "a/zh-cn/device-dev/quick-start/Hi3516\346\220\255\345\273\272\347\216\257\345\242\203.md" "b/zh-cn/device-dev/quick-start/Hi3516\346\220\255\345\273\272\347\216\257\345\242\203.md" index 574af97c9026e2fcbc855d16b17b5a774f106390..745c6249de977460afdb91a563f9369891204c22 100644 --- "a/zh-cn/device-dev/quick-start/Hi3516\346\220\255\345\273\272\347\216\257\345\242\203.md" +++ "b/zh-cn/device-dev/quick-start/Hi3516\346\220\255\345\273\272\347\216\257\345\242\203.md" @@ -90,8 +90,8 @@ Hi3516开发板对Linux服务器通用环境配置需要的工具及其获取途 ## 安装Linux编译环境 >![](public_sys-resources/icon-notice.gif) **须知：** ->- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装LLVM、hc-gen编译工具。 ->- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装LLVM、hc-gen编译工具。安装LLVM、hc-gen编译工具时，请确保编译工具的环境变量路径唯一。 +>- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装hc-gen编译工具。 +>- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装hc-gen编译工具。安装时，请确保编译工具的环境变量路径唯一。 ### 将Linux shell改为bash diff --git "a/zh-cn/device-dev/quick-start/Hi3518\345\270\270\350\247\201\351\227\256\351\242\230.md" "b/zh-cn/device-dev/quick-start/Hi3518\345\270\270\350\247\201\351\227\256\351\242\230.md" index 0c570af03987b24123913ec007af2360e555bb55..e22e6586fbf8319db457691a0ab63bba423ec7c0 100644 --- "a/zh-cn/device-dev/quick-start/Hi3518\345\270\270\350\247\201\351\227\256\351\242\230.md" +++ "b/zh-cn/device-dev/quick-start/Hi3518\345\270\270\350\247\201\351\227\256\351\242\230.md" @@ -160,8 +160,8 @@ >![](public_sys-resources/icon-notice.gif) **须知：** >单板的U-boot文件请在开源包中获取： - >- Hi3516DV300：vendor\\hisi\\hi35xx\\hi3516dv300\\uboot\\out\\boot\\u-boot-hi3516dv300.bin - >- Hi3518EV300：vendor\\hisi\\hi35xx\\hi3518ev300\\uboot\\out\\boot\\u-boot-hi3518ev300.bin + >Hi3516DV300：device\\hisilicon\\hispark\_taurus\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3516dv300.bin + >Hi3518EV300：device\\hisilicon\\hispark\_aries\\sdk\_liteos\\uboot\\out\\boot\\u-boot-hi3518ev300.bin 2. 根据USB烧写步骤烧写U-boot文件。 diff --git "a/zh-cn/device-dev/quick-start/Hi3518\345\274\200\345\217\221\346\235\277.md" "b/zh-cn/device-dev/quick-start/Hi3518\345\274\200\345\217\221\346\235\277.md" index 387e1c6fbb7550b3d4ecbb17d01289a12137d948..6bd48ddd929f8201f704e3bdb725251a51876904 100644 --- "a/zh-cn/device-dev/quick-start/Hi3518\345\274\200\345\217\221\346\235\277.md" +++ "b/zh-cn/device-dev/quick-start/Hi3518\345\274\200\345\217\221\346\235\277.md" @@ -2,7 +2,7 @@ - **[Hi3518开发板介绍](Hi3518开发板介绍.md)** -- **[搭建环境](搭建环境.md)** +- **[Hi3518搭建环境](Hi3518搭建环境.md)** - **[开发Hi3518第一个示例程序](开发Hi3518第一个示例程序.md)** diff --git "a/zh-cn/device-dev/quick-start/Hi3518\346\220\255\345\273\272\347\216\257\345\242\203.md" "b/zh-cn/device-dev/quick-start/Hi3518\346\220\255\345\273\272\347\216\257\345\242\203.md" index 8952dea7476fc69572363f2b78e2607798c4fbb9..7cd8c27bba77ea5c083d9af799913b57216dd00b 100644 --- "a/zh-cn/device-dev/quick-start/Hi3518\346\220\255\345\273\272\347\216\257\345\242\203.md" +++ "b/zh-cn/device-dev/quick-start/Hi3518\346\220\255\345\273\272\347\216\257\345\242\203.md" @@ -81,8 +81,8 @@ Hi3518开发板对Linux服务器通用环境配置需要的工具及其获取途 ## 安装Linux编译环境 >![](public_sys-resources/icon-notice.gif) **须知：** ->- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装gn、ninja、LLVM、hc-gen编译工具。 ->- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装LLVM、hc-gen编译工具。安装LLVM、hc-gen编译工具时，请确保编译工具的环境变量路径唯一。 +>- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装hc-gen编译工具。 +>- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装hc-gen编译工具。安装时，请确保编译工具的环境变量路径唯一。 ### 将Linux shell改为bash diff --git "a/zh-cn/device-dev/quick-start/Hi3861\345\274\200\345\217\221\346\235\277\344\273\213\347\273\215.md" "b/zh-cn/device-dev/quick-start/Hi3861\345\274\200\345\217\221\346\235\277\344\273\213\347\273\215.md" index 50447ca7eabcd32e5ca06b0f00f116574571c835..07c687b7c1b14d3abc386404d7ec62c750332307 100644 --- "a/zh-cn/device-dev/quick-start/Hi3861\345\274\200\345\217\221\346\235\277\344\273\213\347\273\215.md" +++ "b/zh-cn/device-dev/quick-start/Hi3861\345\274\200\345\217\221\346\235\277\344\273\213\347\273\215.md" @@ -3,7 +3,7 @@ - [开发板简介](#section187215231809) - [资源和约束](#section82610215014) - [开发板规格](#section169054431017) -- [关键特性](#section1317173016507) +- [OpenHarmony关键特性](#section1317173016507) 本文档介绍Hi3861 WLAN模组的开发环境搭建、版本编译构建、烧录、源码修改、调试验证等方法。通过学习，开发者会对Hi3861 WLAN模组开发流程有初步认识，并可上手业务开发。 diff --git "a/zh-cn/device-dev/quick-start/Hi3861\346\220\255\345\273\272\347\216\257\345\242\203.md" "b/zh-cn/device-dev/quick-start/Hi3861\346\220\255\345\273\272\347\216\257\345\242\203.md" index 00475656c8d318d4596d9e5ca0afc40ccbac1481..cfe835e01fa50ec6b3c9ceaa779c10e2a364a1e2 100644 --- "a/zh-cn/device-dev/quick-start/Hi3861\346\220\255\345\273\272\347\216\257\345\242\203.md" +++ "b/zh-cn/device-dev/quick-start/Hi3861\346\220\255\345\273\272\347\216\257\345\242\203.md" @@ -3,6 +3,7 @@ - [前提条件](#section2074878255) - [Hi3861环境特有要求](#section466851916410) - [安装Linux编译环境](#section497484245614) +- [将Linux shell改为bash](#section23838991011) - [安装编译依赖基础软件（仅Ubuntu 20+需要）](#section45512412251) - [安装Scons](#section13515123015279) - [安装python模块](#section88701892341) @@ -33,7 +34,16 @@ Hi3861开发板对环境配置的特有要求如下表所示。 -

Linux服务器

+

Linux服务器

+ +

bash

+ +

命令行处理工具

+ +

系统配置

+ + +

Linux服务器

编译基础软件包(仅ubuntu 20+需要)

@@ -87,6 +97,29 @@ Hi3861开发板对环境配置的特有要求如下表所示。 >- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装gcc\_riscv32编译工具。 >- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装gcc\_riscv32编译工具。安装gcc\_riscv32编译工具时，请确保编译工具的环境变量路径唯一。 +## 将Linux shell改为bash + +查看shell是否为bash，在终端运行如下命令 + +``` +ls -l /bin/sh +``` + +如果显示为 "/bin/sh-\>bash" 则为正常，否则请按照以下方式修改 + +方法一：在终端运行如下命令，然后选择no + +``` +sudo dpkg-reconfigure dash +``` + +方法二：先删除sh，再创建软链接 + +``` +sudo rm -rf /bin/sh +sudo ln -s /bin/bash /bin/sh +``` + ### 安装编译依赖基础软件（仅Ubuntu 20+需要） 执行以下命令进行安装： @@ -132,12 +165,12 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get - **安装包方式：** 1. 下载.whl文件（例如：kconfiglib-13.2.0-py2.py3-none-any.whl）。 - + 下载路径：“[https://pypi.org/project/kconfiglib\#files](https://pypi.org/project/kconfiglib#files)” 1. 运行如下命令，安装.whl文件。 - + ``` sudo pip3 install kconfiglib-13.2.0-py2.py3-none-any.whl ``` @@ -161,7 +194,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 1. 运行如下命令，安装.whl文件。 - + ``` sudo pip3 install pycryptodome-3.9.9-cp38-cp38-manylinux1_x86_64.whl ``` @@ -178,12 +211,12 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get - **安装包方式：** 1. 下载.whl文件（例如：six-1.12.0-py2.py3-none-any.whl）。 - + 下载路径：“[https://pypi.org/project/six/\#files](https://pypi.org/project/six/#files)” 1. 运行如下命令，安装.whl文件。 - + ``` sudo pip3 install six-1.12.0-py2.py3-none-any.whl ``` @@ -204,7 +237,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 1. 运行如下命令，安装.whl文件。 - + ``` sudo pip3 install ecdsa-0.14.1-py2.py3-none-any.whl ``` @@ -215,7 +248,8 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get ### 安装gcc\_riscv32（WLAN模组类编译工具链） >![](public_sys-resources/icon-notice.gif) **须知：** ->Hi3861平台仅支持使用libgcc运行时库的静态链接，不建议开发者使用libgcc运行时库的动态链接，会导致商业分发时被GPL V3污染。 +>- Hi3861平台仅支持使用libgcc运行时库的静态链接，不建议开发者使用libgcc运行时库的动态链接，会导致商业分发时被GPL V3污染。 +>- 通过下述步骤2-15，我们编译好了gcc镜像，提供给开发者[直接下载](https://repo.huaweicloud.com/harmonyos/compiler/gcc_riscv32/7.3.0/linux/gcc_riscv32-linux-7.3.0.tar.gz)使用。直接下载gcc镜像的开发者可省略下述2-15步。 1. 打开Linux编译服务器终端。 2. 环境准备，请安装"gcc, g++, bison, flex, makeinfo"软件，确保工具链能正确编译。 @@ -227,7 +261,7 @@ sudo apt-get install build-essential && sudo apt-get install gcc && sudo apt-get 3. 下载riscv-gnu-toolchain交叉编译工具链。 ``` - git clone --recursive https://github.com/riscv/riscv-gnu-toolchain + git clone --recursive https://gitee.com/mirrors/riscv-gnu-toolchain.git ``` 4. 打开文件夹riscv-gnu-toolchain，先删除空文件夹，以防止下载newlib，binutils，gcc时冲突。 diff --git a/zh-cn/device-dev/quick-start/Readme-CN.md b/zh-cn/device-dev/quick-start/Readme-CN.md index 04d95e5817808547f4f7b8c0903d05e25050660e..bccb01d2765524d6f390d07078efafd8ead98910 100644 --- a/zh-cn/device-dev/quick-start/Readme-CN.md +++ b/zh-cn/device-dev/quick-start/Readme-CN.md @@ -18,7 +18,7 @@ - [Hi3518开发板](Hi3518开发板.md) - [Hi3518开发板介绍](Hi3518开发板介绍.md) - - [搭建环境](搭建环境.md) + - [Hi3518搭建环境](Hi3518搭建环境.md) - [开发Hi3518第一个示例程序](开发Hi3518第一个示例程序.md) - [Hi3518常见问题](Hi3518常见问题.md) diff --git a/zh-cn/device-dev/quick-start/figures/1.png b/zh-cn/device-dev/quick-start/figures/1.png new file mode 100644 index 0000000000000000000000000000000000000000..791dfeae272070b7e285ea3070ebd3b1e9100eb5 Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/1.png differ diff --git a/zh-cn/device-dev/quick-start/figures/2.png b/zh-cn/device-dev/quick-start/figures/2.png new file mode 100644 index 0000000000000000000000000000000000000000..360114c797c42340cdeadcb566a7d90651cd12de Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/2.png differ diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-0.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-0.png deleted file mode 100644 index 87cb2f11978845b4fcbeda047fa6e464f9c1b658..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-0.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334-1.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-2.png similarity index 100% rename from en/device-dev/quick-start/figures/2021-01-27_170334-1.png rename to zh-cn/device-dev/quick-start/figures/2021-01-27_170334-2.png diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-3.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-3.png new file mode 100644 index 0000000000000000000000000000000000000000..5b573a4ddfe89fe25cb1b567736823244fdb9e97 Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-3.png differ diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-4.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-4.png deleted file mode 100644 index b17002227e6effa92e5ced9ed418476e7fd70098..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-4.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/2021-01-27_170334-5.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-6.png similarity index 100% rename from en/device-dev/quick-start/figures/2021-01-27_170334-5.png rename to zh-cn/device-dev/quick-start/figures/2021-01-27_170334-6.png diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-7.png b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-7.png new file mode 100644 index 0000000000000000000000000000000000000000..5b573a4ddfe89fe25cb1b567736823244fdb9e97 Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/2021-01-27_170334-7.png differ diff --git a/zh-cn/device-dev/quick-start/figures/2021-01-28_112953-3.png b/zh-cn/device-dev/quick-start/figures/2021-01-28_112953-3.png deleted file mode 100644 index a3a92549a345ad7ebb1d0142a50d2c41c4ede9f4..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/2021-01-28_112953-3.png and /dev/null differ diff --git a/en/device-dev/quick-start/figures/2021-01-28_112953-4.png b/zh-cn/device-dev/quick-start/figures/2021-01-28_112953-5.png similarity index 100% rename from en/device-dev/quick-start/figures/2021-01-28_112953-4.png rename to zh-cn/device-dev/quick-start/figures/2021-01-28_112953-5.png diff --git a/zh-cn/device-dev/quick-start/figures/3-0.png b/zh-cn/device-dev/quick-start/figures/3-0.png new file mode 100644 index 0000000000000000000000000000000000000000..f354b2d27ce06bd5af6a8702c0894bf5c50a97bb Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/3-0.png differ diff --git a/zh-cn/device-dev/quick-start/figures/3.png b/zh-cn/device-dev/quick-start/figures/3.png index 3b767f744e6e05e12017fdf155957511814931b7..91f3fa22153f501e308fab46f92f2e95995f1917 100644 Binary files a/zh-cn/device-dev/quick-start/figures/3.png and b/zh-cn/device-dev/quick-start/figures/3.png differ diff --git a/zh-cn/device-dev/quick-start/figures/4.png b/zh-cn/device-dev/quick-start/figures/4.png index 8ab67d9dc25c3fbb4c6d1ae1c719adfdc4d82bfe..3f5fa2829949e59d498da9dd5ff1f48fa0647cf1 100644 Binary files a/zh-cn/device-dev/quick-start/figures/4.png and b/zh-cn/device-dev/quick-start/figures/4.png differ diff --git a/zh-cn/device-dev/quick-start/figures/5-1.png b/zh-cn/device-dev/quick-start/figures/5-1.png new file mode 100644 index 0000000000000000000000000000000000000000..8c6ec0adb87f693519f0e3b00b3aa7053f3e23ae Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/5-1.png differ diff --git a/zh-cn/device-dev/quick-start/figures/5.png b/zh-cn/device-dev/quick-start/figures/5.png new file mode 100644 index 0000000000000000000000000000000000000000..f3a76a6922315fe595ae4214331ce322766b3b48 Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/5.png differ diff --git a/zh-cn/device-dev/quick-start/figures/6.png b/zh-cn/device-dev/quick-start/figures/6.png new file mode 100644 index 0000000000000000000000000000000000000000..9d3bdbfe1eac9dc532496a7785e8caf99c41780b Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/6.png differ diff --git "a/zh-cn/device-dev/quick-start/figures/SCons\345\256\211\350\243\205\346\210\220\345\212\237\347\225\214\351\235\242.png" "b/zh-cn/device-dev/quick-start/figures/SCons\345\256\211\350\243\205\346\210\220\345\212\237\347\225\214\351\235\242.png" deleted file mode 100644 index e66ca6ffae9aec5f4f5b97ceccf2e37792e95f18..0000000000000000000000000000000000000000 Binary files "a/zh-cn/device-dev/quick-start/figures/SCons\345\256\211\350\243\205\346\210\220\345\212\237\347\225\214\351\235\242.png" and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/chuankou1-6.png b/zh-cn/device-dev/quick-start/figures/chuankou1-6.png deleted file mode 100644 index 485cb3054c0c08edd6738256f27ad629ce65e1d7..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/chuankou1-6.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/chuankou1-8.png b/zh-cn/device-dev/quick-start/figures/chuankou1-8.png new file mode 100644 index 0000000000000000000000000000000000000000..8eb26425f53028a08eb40e3037ecd302f3082270 Binary files /dev/null and b/zh-cn/device-dev/quick-start/figures/chuankou1-8.png differ diff --git a/zh-cn/device-dev/quick-start/figures/chuankou1.png b/zh-cn/device-dev/quick-start/figures/chuankou1.png index 485cb3054c0c08edd6738256f27ad629ce65e1d7..063a5ff561d4a29f48744c3133724eb6b45e8a47 100644 Binary files a/zh-cn/device-dev/quick-start/figures/chuankou1.png and b/zh-cn/device-dev/quick-start/figures/chuankou1.png differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001054599199.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001054599199.png deleted file mode 100644 index 836bb759fa5ea304dca1443148e46374284f6f77..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001054599199.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001055040538.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001055040538.png deleted file mode 100644 index f927ac94566b35c9d8deb4a07c767bb2811c5214..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001055040538.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078527924.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078527924.png deleted file mode 100644 index 365f9bd4091c4a7100170959194a9b4cc4dcf4c3..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078527924.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078528390.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078528390.png deleted file mode 100644 index 759f7560a89419c786c9018298dbd45a05237aa3..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001078528390.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123361875.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123361875.png deleted file mode 100644 index f35e9fdf0fd2acfd41f29a65254bddf84019192d..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123361875.png and /dev/null differ diff --git a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123445553.png b/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123445553.png deleted file mode 100644 index 450ee24afd038eb5defd235321385743ef295f9e..0000000000000000000000000000000000000000 Binary files a/zh-cn/device-dev/quick-start/figures/zh-cn_image_0000001123445553.png and /dev/null differ diff --git "a/zh-cn/device-dev/quick-start/figures/\344\270\262\345\217\243\345\217\202\346\225\260\351\205\215\347\275\256\347\244\272\346\204\217\345\233\276.png" "b/zh-cn/device-dev/quick-start/figures/\344\270\262\345\217\243\345\217\202\346\225\260\351\205\215\347\275\256\347\244\272\346\204\217\345\233\276.png" deleted file mode 100644 index 179b1e29bcdd3af8c1947d1f72c90b469c320aa8..0000000000000000000000000000000000000000 Binary files "a/zh-cn/device-dev/quick-start/figures/\344\270\262\345\217\243\345\217\202\346\225\260\351\205\215\347\275\256\347\244\272\346\204\217\345\233\276.png" and /dev/null differ diff --git "a/zh-cn/device-dev/quick-start/figures/\346\210\252\345\233\276.png" "b/zh-cn/device-dev/quick-start/figures/\346\210\252\345\233\276.png" new file mode 100644 index 0000000000000000000000000000000000000000..ebf4f8eba03720edddfb9ef8eb38bd5f71126f2a Binary files /dev/null and "b/zh-cn/device-dev/quick-start/figures/\346\210\252\345\233\276.png" differ diff --git "a/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200DevEco\344\270\262\345\217\243\347\273\210\347\253\257\347\244\272\346\204\217\345\233\276.png" "b/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200DevEco\344\270\262\345\217\243\347\273\210\347\253\257\347\244\272\346\204\217\345\233\276.png" deleted file mode 100644 index 2a375124a6b7fa03d463d869b788980865ab557d..0000000000000000000000000000000000000000 Binary files "a/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200DevEco\344\270\262\345\217\243\347\273\210\347\253\257\347\244\272\346\204\217\345\233\276.png" and /dev/null differ diff --git "a/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200\344\270\262\345\217\243\345\244\261\350\264\245\345\233\276.png" "b/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200\344\270\262\345\217\243\345\244\261\350\264\245\345\233\276.png" index 8fd80e5c67d804c3e03623a257d6ef3601fef81b..0eee1bbff2e54816d6be05f7f3972a83f615884d 100644 Binary files "a/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200\344\270\262\345\217\243\345\244\261\350\264\245\345\233\276.png" and "b/zh-cn/device-dev/quick-start/figures/\346\211\223\345\274\200\344\270\262\345\217\243\345\244\261\350\264\245\345\233\276.png" differ diff --git "a/zh-cn/device-dev/quick-start/figures/\350\256\276\347\275\256\345\233\276\344\276\213-2.png" "b/zh-cn/device-dev/quick-start/figures/\350\256\276\347\275\256\345\233\276\344\276\213-2.png" deleted file mode 100644 index be9e1743f8664bd064e3b0c556f31ca5cc963464..0000000000000000000000000000000000000000 Binary files "a/zh-cn/device-dev/quick-start/figures/\350\256\276\347\275\256\345\233\276\344\276\213-2.png" and /dev/null differ diff --git a/en/device-dev/quick-start/figures/settings-3.png "b/zh-cn/device-dev/quick-start/figures/\350\256\276\347\275\256\345\233\276\344\276\213-4.png" similarity index 100% rename from en/device-dev/quick-start/figures/settings-3.png rename to "zh-cn/device-dev/quick-start/figures/\350\256\276\347\275\256\345\233\276\344\276\213-4.png" diff --git "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\345\272\224\347\224\250\347\250\213\345\272\217\347\244\272\344\276\213.md" "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\345\272\224\347\224\250\347\250\213\345\272\217\347\244\272\344\276\213.md" index 1344df59d1af72cbb1021544b4b5a6f75cc4e27e..ef0ef5a45fc0a3eda90566d49944bc631ec90895 100644 --- "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\345\272\224\347\224\250\347\250\213\345\272\217\347\244\272\344\276\213.md" +++ "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\345\272\224\347\224\250\347\250\213\345\272\217\347\244\272\344\276\213.md" @@ -170,32 +170,33 @@ Hi3516开发板的代码烧录支持USB烧录、网口烧录和串口烧录三 ![](figures/zh-cn_image_0000001078081434.png) -5. 设置网口烧录的IP地址信息，建议先在本地PC上设置本机的本地TCP/IPv4地址信息，再设置如下选项： +5. 检查和设置连接开发板后的网络适配器的IP地址信息，设置方法请参考[设置Hi3516网口烧录的IP地址信息](https://device.harmonyos.com/cn/docs/ide/user-guides/set_ipaddress-0000001141825075)。 +6. 设置网口烧录的IP地址信息，设置如下选项： - - upload\_net\_server\_ip：选择当前PC的IP地址。例如192.168.1.2 + - upload\_net\_server\_ip：选择[5](#zh-cn_topic_0000001056443961_li1558813168234)中设置的IP地址信息。例如192.168.1.2 - upload\_net\_client\_mask：设置开发板的子网掩码，工具会自动根据选择的upload\_net\_server\_ip进行设置。例如255.255.255.0 - upload\_net\_client\_gw：设置开发板的网关，工具会自动根据选择的upload\_net\_server\_ip进行设置。例如192.168.1.1 - upload\_net\_client\_ip：设置开发板的IP地址，工具会自动根据选择的upload\_net\_server\_ip进行设置。例如192.168.1.3 ![](figures/zh-cn_image_0000001078096426.png) -6. 修改待烧录文件（对应hi3516dv300\_fastboothi3516dv300\_kernel、hi3516dv300\_rootfs和hi3516dv300\_userfs页签）的设置，默认情况下，DevEco Device Tool已针对Hi3516系列开发板进行适配，无需单独修改。如果需要修改，请在New Option中，选择对应的修改项进行更改。 +7. 修改待烧录文件（对应hi3516dv300\_fastboothi3516dv300\_kernel、hi3516dv300\_rootfs和hi3516dv300\_userfs页签）的设置，默认情况下，DevEco Device Tool已针对Hi3516系列开发板进行适配，无需单独修改。如果需要修改，请在New Option中，选择对应的修改项进行更改。 ![](figures/2021-01-28_112953.png) -7. 所有的配置都修改完成后，在工程配置页签的顶部，点击**Save**进行保存。 +8. 所有的配置都修改完成后，在工程配置页签的顶部，点击**Save**进行保存。 - ![](figures/2021-01-27_170334-0.png) + ![](figures/2021-01-27_170334-2.png) -8. 打开工程文件，点击![](figures/2021-01-27_170334-1.png)图标，打开DevEco Device Tool界面，在“PROJECT TASKS”中，点击env:hi3516dv300下的**Upload**按钮，启动烧录。 +9. 打开工程文件，点击![](figures/2021-01-27_170334-3.png)图标，打开DevEco Device Tool界面，在“PROJECT TASKS”中，点击env:hi3516dv300下的**Upload**按钮，启动烧录。 ![](figures/2021-01-27_181244.png) -9. 启动烧录后，显示如下提示信息时，请重启开发板（下电再上电）。 +10. 启动烧录后，显示如下提示信息时，请重启开发板（下电再上电）。 ![](figures/zh-cn_image_0000001097124071.png) -10. 重新上电后，启动烧录，界面提示如下信息时，表示烧录成功。 +11. 重新上电后，启动烧录，界面提示如下信息时，表示烧录成功。 ![](figures/zh-cn_image_0000001072956053.png) @@ -212,8 +213,8 @@ Hi3516开发板的代码烧录支持USB烧录、网口烧录和串口烧录三 ![](figures/chuankou1.png) - 1. 单击**Serial port**打开串口。 - 2. 输入串口编号\(按照烧录步骤中查询的串口号，此处以com11举例\)，并连续输入回车直到串口显示"hisilicon"。 + 1. 单击**Monitor**打开串口。 + 2. 连续输入回车直到串口显示"hisilicon"。 3. 单板初次启动或修改启动参数，请进入[步骤2](#l5b42e79a33ea4d35982b78a22913b0b1)，否则进入[步骤3](#ld26f18828aa44c36bfa36be150e60e49)。 2. （单板初次启动必选）修改U-boot的bootcmd及bootargs内容：该步骤为固化操作，若不修改参数只需执行一次。每次复位单板均会自动进入系统。 diff --git "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\351\251\261\345\212\250\347\250\213\345\272\217\347\244\272\344\276\213.md" "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\351\251\261\345\212\250\347\250\213\345\272\217\347\244\272\344\276\213.md" index 6b417f74c6ad4a5941bee032bcfea13cc2d61f88..e72e249c1bd0e3bfe5d39d503283d22acc28848b 100644 --- "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\351\251\261\345\212\250\347\250\213\345\272\217\347\244\272\344\276\213.md" +++ "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3516\347\254\254\344\270\200\344\270\252\351\251\261\345\212\250\347\250\213\345\272\217\347\244\272\344\276\213.md" @@ -437,8 +437,8 @@ ![](figures/chuankou1.png) - 1. 单击**Serial port**打开串口。 - 2. 输入串口编号\(按照烧录步骤中查询的串口号，此处以com11举例\)，并连续输入回车直到串口显示"hisilicon"。 + 1. 单击**Monitor**打开串口。 + 2. 连续输入回车直到串口显示"hisilicon"。 3. 单板初次启动或修改启动参数，请进入[步骤2](开发Hi3516第一个应用程序示例.md#l5b42e79a33ea4d35982b78a22913b0b1)，否则进入[步骤3](开发Hi3516第一个应用程序示例.md#ld26f18828aa44c36bfa36be150e60e49)。 2. （单板初次启动必选）修改U-boot的bootcmd及bootargs内容：该步骤为固化操作，若不修改参数只需执行一次。每次复位单板均会自动进入系统。 diff --git "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3518\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3518\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" index 0df9083015db4f2bd4c18fde15e1f790b3d4e4c1..6a911a4ba2ec1380648e1e10f2553a7ecc08aed6 100644 --- "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3518\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" +++ "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3518\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" @@ -140,7 +140,7 @@ hb build -f（执行编译） 结果文件生成在out/hispark\_aries/ipcamera\_hispark\_aries目录下。 **图 1** 设置图例 -![](figures/设置图例-2.png "设置图例-2") +![](figures/设置图例-4.png "设置图例-4") >![](public_sys-resources/icon-notice.gif) **须知：** >Hi3518EV300单板的U-boot文件获取路径：device/hisilicon/hispark\_aries/sdk\_liteos/uboot/out/boot/u-boot-hi3518ev300.bin @@ -171,13 +171,13 @@ Hi3518开发板的代码烧录仅支持USB烧录方式。 5. 修改待烧录文件（对应hi3518ev300\_fastboot、hi3518ev300\_kernel、hi3518ev300\_rootfs和hi3518ev300\_userfs页签）的设置，默认情况下，DevEco Device Tool已针对Hi3518系列开发板进行适配，无需单独修改。如果需要修改，请在New Option中，选择对应的修改项进行更改。 - ![](figures/2021-01-28_112953-3.png) + ![](figures/2021-01-28_112953-5.png) 6. 所有的配置都修改完成后，在工程配置页签的顶部，点击**Save**进行保存。 - ![](figures/2021-01-27_170334-4.png) + ![](figures/2021-01-27_170334-6.png) -7. 打开工程文件，点击![](figures/2021-01-27_170334-5.png)图标，打开DevEco Device Tool界面，在“PROJECT TASKS”中，点击partition:hi3518ev300\_fastboot下的**Erase**按钮，擦除U-Boot。 +7. 打开工程文件，点击![](figures/2021-01-27_170334-7.png)图标，打开DevEco Device Tool界面，在“PROJECT TASKS”中，点击partition:hi3518ev300\_fastboot下的**Erase**按钮，擦除U-Boot。 ![](figures/2021-01-27_181047.png) @@ -208,10 +208,10 @@ Hi3518开发板的代码烧录仅支持USB烧录方式。 **图 2** 连接串口图 - ![](figures/chuankou1-6.png) + ![](figures/chuankou1-8.png) - 1. 单击**Serial port**打开串口。 - 2. 输入串口编号\(按照烧录步骤中查询的串口号，此处以com11举例\)，并连续输入回车直到串口显示"hisilicon"。 + 1. 单击**Monitor**打开串口。 + 2. 连续输入回车直到串口显示"hisilicon"。 3. 单板初次启动或修改启动参数，请进入[步骤2](#li9441185382314)，否则进入[步骤3](#li6442853122312)。 2. （初次烧写必选）修改U-boot的bootcmd及bootargs内容：该步骤为固化操作，可保存执行结果，但U-boot重新烧入，则需要再次执行下述步骤。 diff --git "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3861\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3861\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" index 9bdf15b5739797de45c2fd51ac507af4cf37f66f..a59ff89967f0c68da7adea4ba433009c419ed3a2 100644 --- "a/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3861\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" +++ "b/zh-cn/device-dev/quick-start/\345\274\200\345\217\221Hi3861\347\254\254\344\270\200\344\270\252\347\244\272\344\276\213\347\250\213\345\272\217.md" @@ -1,12 +1,12 @@ # 开发Hi3861第一个示例程序 -- [源码编译](#section1736014117148) +- [源码编译](#section191121332125319) - [镜像烧录](#section1610612214150) - [WLAN模组联网](#section168257461059) 本示例将演示如何通过AT命令完成WLAN模组与网关联网。 -## 源码编译 +## 源码编译 本节描述如何在Linux服务器上进行WLAN模组版本的编译。 @@ -17,35 +17,35 @@ **图 1** IDE终端工具打开方法 - ![](figures/zh-cn_image_0000001055040538.png) + ![](figures/1.png) 在终端界面使用ssh命令连接linux服务器，如“ssh _user_@_ipaddr_”。 **图 2** 终端界面示意图 - ![](figures/zh-cn_image_0000001054599199.png) + ![](figures/2.png) -2. 进入代码根路径，并在终端窗口，执行脚本命令“hb set”、“.”，选择需要编译的版本“wifiiot\_hispark\_pegasus@hisilicon”。 +2. 进入代码根路径，并在终端窗口，执行脚本命令“hb set”、“.”，选择需要编译的版本“wifiiot\_hispark\_pegasus”。 **图 3** 在终端界面选择目标构建版本示意图 - ![](figures/zh-cn_image_0000001078527924.png) + ![](figures/3.png) 3. 执行“hb build”启动版本构建。 **图 4** 在终端界面执行编译命令示意图 - ![](figures/zh-cn_image_0000001123445553.png) + ![](figures/4.png) 4. 编译结束后，如果出现“wifiiot\_hispark\_pegasus build success”字样，则证明构建成功，如下图所示。 **图 5** 编译成功示意图 - ![](figures/zh-cn_image_0000001123361875.png) + ![](figures/5.png) 5. 构建成功后，会在./out/wifiiot/路径中生成以下文件，使用如下命令可以查看，至此编译构建流程结束。 @@ -56,7 +56,7 @@ **图 6** 编译文件存放目录示意图 - ![](figures/zh-cn_image_0000001078528390.png) + ![](figures/3-0.png) ## 镜像烧录 @@ -91,7 +91,7 @@ Hi3861 WLAN模组的镜像烧录可以通过OpenHarmony IDE工具DevEco完成， ![](figures/zh-cn_image_0000001078313582.png) -7. 打开工程文件，点击图标，打开DevEco Device Tool界面，在“PROJECT TASKS”中，点击env:hi3861下的**Upload**按钮，启动烧录。 +7. 打开工程文件，在DevEco Device Tool界面的“PROJECT TASKS”中，点击env:hi3861下的**Upload**按钮，启动烧录。 ![](figures/zh-cn_image_0000001120802383.png) @@ -108,24 +108,21 @@ Hi3861 WLAN模组的镜像烧录可以通过OpenHarmony IDE工具DevEco完成， 完成版本构建及烧录后，下面开始介绍如何在串口终端上执行AT命令，使WLAN模组联网。 -1. 保持Windows工作台和WLAN模组的连接状态，在DevEco工具最下方，点击“Serial port”按钮，弹出串口终端的配置界面。 +1. 保持Windows工作台和WLAN模组的连接状态，在DevEco工具最下方，点击“DevEco:Serial Monitor”按钮。 **图 7** 打开DevEco串口终端示意图 - ![](figures/打开DevEco串口终端示意图.png "打开DevEco串口终端示意图") - -2. 选择串口，并完成参数配置。根据实际情况输入串口号，此处为“COM11”；波特率、数据位、停止位使用默认值；由于AT命令输入需要以“\\r\\n”结尾，否则输入无效，所以结束符处输入“1”。 + - **图 8** 串口参数配置示意图 - ![](figures/串口参数配置示意图.png "串口参数配置示意图") + ![](figures/5-1.png) -3. 复位WLAN模组，终端界面显示“ready to OS start”，则启动成功。 +2. 复位WLAN模组，终端界面显示“ready to OS start”，则启动成功。 - **图 9** WLAN复位成功示意图 + **图 8** WLAN复位成功示意图 - ![](figures/3.png) + ![](figures/6.png) -4. 在DevEco的串口终端中，依次执行如下AT命令，启动STA模式，连接指定AP热点，并开启DHCP功能。 +3. 在DevEco的串口终端中，依次执行如下AT命令，启动STA模式，连接指定AP热点，并开启DHCP功能。 ``` AT+STARTSTA # 启动STA模式 @@ -136,16 +133,16 @@ Hi3861 WLAN模组的镜像烧录可以通过OpenHarmony IDE工具DevEco完成， AT+DHCP=wlan0,1 # 通过DHCP向AP请求wlan0的IP地址 ``` -5. 查看WLAN模组与网关联通是否正常，如下图所示。 +4. 查看WLAN模组与网关联通是否正常，如下图所示。 ``` AT+IFCFG # 查看模组接口IP AT+PING=X.X.X.X # 检查模组与网关的联通性，其中X.X.X.X需替换为实际的网关地址 ``` - **图 10** WLAN模组联网成功示意图 + **图 9** WLAN模组联网成功示意图 - ![](figures/4.png) + ![](figures/截图.png) diff --git "a/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\216\257\345\242\203.md" "b/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\216\257\345\242\203.md" deleted file mode 100644 index 479278e2cd46d13c36a76bfab1d0d942e74ced13..0000000000000000000000000000000000000000 --- "a/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\216\257\345\242\203.md" +++ /dev/null @@ -1,121 +0,0 @@ -# 搭建环境 - -- [前提条件](#section2074878255) -- [Hi3518环境特有要求](#section1724111409282) - - [硬件要求](#section487353718276) - - [软件要求](#section17315193935817) - -- [安装Linux编译环境](#section8831868501) - - [安装文件打包工具](#section480195453419) - - [安装hc-gen](#section351420104218) - - -## 前提条件 - -Hi3518环境搭建前，请先完成[搭建系统基础环境](搭建系统基础环境.md)。 - -## Hi3518环境特有要求 - -### 硬件要求 - -- Hi3518EV300 IoT Camera开发板 -- USB转串口线、网线（Windows工作台通过USB转串口线、网线与开发板连接） - - 各硬件连接关系如下图所示。 - - -**图 1** 硬件连线图 -![](figures/硬件连线图.png "硬件连线图") - -### 软件要求 - ->![](public_sys-resources/icon-notice.gif) **须知：** ->本节描述安装包方式搭建编译环境的操作步骤。如果是Docker方式安装编译环境，请跳过此章节以及下述安装Linux编译环境章节。 - -Hi3518开发板对Linux服务器通用环境配置需要的工具及其获取途径如下表所示。 - -**表 1** Linux服务器开发工具及获取途径 - - - - - - - - - - - - - - - - -

开发工具

-

用途

-

获取途径

-

dosfstools、mtools、mtd-utils

-

文件打包工具

-

通过apt-get install安装

-

hc-gen

-

驱动配置编译工具

-

https://repo.huaweicloud.com/harmonyos/compiler/hc-gen/0.65/linux/hc-gen-0.65-linux.tar

-
- -## 安装Linux编译环境 - ->![](public_sys-resources/icon-notice.gif) **须知：** ->- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装gn、ninja、LLVM、hc-gen编译工具。 ->- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装LLVM、hc-gen编译工具。安装LLVM、hc-gen编译工具时，请确保编译工具的环境变量路径唯一。 - -### 安装文件打包工具 - -1. 打开Linux编译服务器终端。 -2. 运行如下命令，安装dosfstools。 - - ``` - sudo apt-get install dosfstools - ``` - -3. 运行如下命令，安装mtools。 - - ``` - sudo apt-get install mtools - ``` - -4. 运行如下命令，安装mtd-utils。 - - ``` - sudo apt-get install mtd-utils - ``` - - -### 安装hc-gen - -1. 打开Linux编译服务器终端。 -2. [下载hc-gen工具](https://repo.huaweicloud.com/harmonyos/compiler/hc-gen/0.65/linux/hc-gen-0.65-linux.tar)。 -3. 解压hc-gen安装包到Linux服务器\~/hc-gen路径下。 - - ``` - tar -xvf hc-gen-0.65-linux.tar -C ~/ - ``` - -4. 设置环境变量。 - - ``` - vim ~/.bashrc - ``` - - 将以下命令拷贝到.bashrc文件的最后一行，保存并退出。 - - ``` - export PATH=~/hc-gen:$PATH - ``` - -5. 生效环境变量。 - - ``` - source ~/.bashrc - ``` - - diff --git "a/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\263\273\347\273\237\345\237\272\347\241\200\347\216\257\345\242\203.md" "b/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\263\273\347\273\237\345\237\272\347\241\200\347\216\257\345\242\203.md" index af4d2e28ee5b11fe30219726e86dd61c926453a7..eda95bef595f3790eba83dbc67e8fcd364fe1366 100644 --- "a/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\263\273\347\273\237\345\237\272\347\241\200\347\216\257\345\242\203.md" +++ "b/zh-cn/device-dev/quick-start/\346\220\255\345\273\272\347\263\273\347\273\237\345\237\272\347\241\200\347\216\257\345\242\203.md" @@ -78,7 +78,7 @@

操作系统

-

Ubuntu16.04及以上64位系统版本，Shell使用bash。

+

Ubuntu16.04及以上64位系统版本。

说明：

通常系统默认安装samba、vim等常用软件，需要做适当适配以支持linux文件共享。

@@ -134,45 +134,45 @@ Linux服务器通用环境配置需要的工具及其获取途径如下表所示 - - - - - - - - - - - - @@ -189,8 +189,8 @@ Linux编译环境可以通过Docker方式快速安装，具体请参见[Docker ## 安装Linux编译环境（方法二：安装包方式） >![](public_sys-resources/icon-notice.gif) **须知：** ->- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装gn、ninja编译工具。 ->- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装gn、ninja编译工具。安装gn、ninja编译工具时，请确保编译工具的环境变量路径唯一。 +>- 如果后续通过“HPM组件方式”或“HPM包管理器命令行工具方式”获取源码，不需要安装gn、ninja、LLVM、hb编译工具。 +>- （推荐）如果后续通过“镜像站点方式”或“代码仓库方式”获取源码，需要安装gn、ninja、LLVM、hb编译工具。安装时，请确保编译工具的环境变量路径唯一。 ### 连接Linux服务器 @@ -380,8 +380,7 @@ Linux编译环境可以通过Docker方式快速安装，具体请参见[Docker **前提条件** -- 请先安装Python 3.7.4及以上，请见[安装和配置Python](#section11255767343)。 -- 下载源码，请见[源码获取](../get-code/源码获取.md)。 +请先安装Python 3.7.4及以上，请见[安装和配置Python](#section11255767343)。 **安装方法** @@ -439,7 +438,7 @@ python3 -m pip uninstall ohos-build ## 获取OpenHarmony源码 -开发者需要在Linux服务器上下载并解压一套源代码，获取OpenHarmony 源码（[下载链接](https://repo.huaweicloud.com/harmonyos/os/1.0.1/code-1.0.1.tar.gz)）。更多源码获取方式，请见[源码获取](../get-code/源码获取.md)。 +开发者需要在Linux服务器上下载并解压一套源代码，请参见[源码获取](../get-code/源码获取.md)。 ## 常见问题 @@ -521,7 +520,7 @@ python3 -m pip uninstall ohos-build ``` sudo apt-get remove python3-apt - sduo apt-get install python3-apt + sudo apt-get install python3-apt ```

开发工具

用途

+

用途

获取途径

+

获取途径

Python3.7+

编译构建工具

+

编译构建工具

通过互联网获取

+

通过互联网获取

gn

产生ninja编译脚本

+

产生ninja编译脚本

https://repo.huaweicloud.com/harmonyos/compiler/gn/1717/linux/gn-linux-x86-1717.tar.gz

+

https://repo.huaweicloud.com/harmonyos/compiler/gn/1717/linux/gn-linux-x86-1717.tar.gz

ninja

执行ninja编译脚本

+

执行ninja编译脚本

https://repo.huaweicloud.com/harmonyos/compiler/ninja/1.9.0/linux/ninja.1.9.0.tar

+

https://repo.huaweicloud.com/harmonyos/compiler/ninja/1.9.0/linux/ninja.1.9.0.tar

LLVM

编译工具链

+

编译工具链

https://repo.huaweicloud.com/harmonyos/compiler/clang/9.0.0-36191/linux/llvm-linux-9.0.0-36191.tar

+

https://repo.huaweicloud.com/harmonyos/compiler/clang/9.0.0-36191/linux/llvm-linux-9.0.0-36191.tar

hb

编译构建命令行工具

+

OpenHarmony编译构建命令行工具

通过互联网获取

+

通过互联网获取