# # Multimedia Video device configuration # menu "Video For Linux" depends on VIDEO_DEV comment "Video Adapters" config VIDEO_ADV_DEBUG bool "Enable advanced debug functionality" depends on VIDEO_DEV default n ---help--- Say Y here to enable advanced debugging functionality on some V4L devices. In doubt, say N. source "drivers/media/video/bt8xx/Kconfig" config VIDEO_SAA6588 tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards" depends on VIDEO_DEV && I2C && VIDEO_BT848 help Support for Radio Data System (RDS) decoder. This allows seeing radio station identification transmitted using this standard. Currentlly, it works only with bt8x8 chips. To compile this driver as a module, choose M here: the module will be called saa6588. config VIDEO_PMS tristate "Mediavision Pro Movie Studio Video For Linux" depends on VIDEO_DEV && ISA help Say Y if you have such a thing. To compile this driver as a module, choose M here: the module will be called pms. config VIDEO_PLANB tristate "PlanB Video-In on PowerMac" depends on PPC_PMAC && VIDEO_DEV && BROKEN help PlanB is the V4L driver for the PowerMac 7x00/8x00 series video input hardware. If you want to experiment with this, say Y. Otherwise, or if you don't understand a word, say N. See for more info. Saying M will compile this driver as a module (planb). config VIDEO_BWQCAM tristate "Quickcam BW Video For Linux" depends on VIDEO_DEV && PARPORT help Say Y have if you the black and white version of the QuickCam camera. See the next option for the color version. To compile this driver as a module, choose M here: the module will be called bw-qcam. config VIDEO_CQCAM tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)" depends on EXPERIMENTAL && VIDEO_DEV && PARPORT help This is the video4linux driver for the colour version of the Connectix QuickCam. If you have one of these cameras, say Y here, otherwise say N. This driver does not work with the original monochrome QuickCam, QuickCam VC or QuickClip. It is also available as a module (c-qcam). Read for more information. config VIDEO_W9966 tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux" depends on PARPORT_1284 && VIDEO_DEV && PARPORT help Video4linux driver for Winbond's w9966 based Webcams. Currently tested with the LifeView FlyCam Supra. If you have one of these cameras, say Y here otherwise say N. This driver is also available as a module (w9966). Check out for more information. config VIDEO_CPIA tristate "CPiA Video For Linux" depends on VIDEO_DEV ---help--- This is the video4linux driver for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Labs Video Blaster Webcam II. If you have one of these cameras, say Y here and select parallel port and/or USB lowlevel support below, otherwise say N. This will not work with the Creative Webcam III. Please read for more information. This driver is also available as a module (cpia). config VIDEO_CPIA_PP tristate "CPiA Parallel Port Lowlevel Support" depends on PARPORT_1284 && VIDEO_CPIA && PARPORT help This is the lowlevel parallel port support for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Webcam II. If you have the parallel port version of one of these cameras, say Y here, otherwise say N. It is also available as a module (cpia_pp). config VIDEO_CPIA_USB tristate "CPiA USB Lowlevel Support" depends on VIDEO_CPIA && USB help This is the lowlevel USB support for cameras based on Vision's CPiA (Colour Processor Interface ASIC), such as the Creative Webcam II. If you have the USB version of one of these cameras, say Y here, otherwise say N. This will not work with the Creative Webcam III. It is also available as a module (cpia_usb). source "drivers/media/video/cpia2/Kconfig" config VIDEO_SAA5246A tristate "SAA5246A, SAA5281 Teletext processor" depends on VIDEO_DEV && I2C help Support for I2C bus based teletext using the SAA5246A or SAA5281 chip. Useful only if you live in Europe. To compile this driver as a module, choose M here: the module will be called saa5246a. config VIDEO_SAA5249 tristate "SAA5249 Teletext processor" depends on VIDEO_DEV && I2C help Support for I2C bus based teletext using the SAA5249 chip. At the moment this is only useful on some European WinTV cards. To compile this driver as a module, choose M here: the module will be called saa5249. config TUNER_3036 tristate "SAB3036 tuner" depends on VIDEO_DEV && I2C help Say Y here to include support for Philips SAB3036 compatible tuners. If in doubt, say N. config VIDEO_VINO tristate "SGI Vino Video For Linux (EXPERIMENTAL)" depends on VIDEO_DEV && I2C && SGI_IP22 && EXPERIMENTAL select I2C_ALGO_SGI help Say Y here to build in support for the Vino video input system found on SGI Indy machines. config VIDEO_STRADIS tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)" depends on EXPERIMENTAL && VIDEO_DEV && PCI help Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video driver for PCI. There is a product page at . config VIDEO_ZORAN tristate "Zoran ZR36057/36067 Video For Linux" depends on VIDEO_DEV && PCI && I2C_ALGOBIT help Say Y for support for MJPEG capture cards based on the Zoran 36057/36067 PCI controller chipset. This includes the Iomega Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is a driver homepage at . For more information, check . To compile this driver as a module, choose M here: the module will be called zr36067. config VIDEO_ZORAN_BUZ tristate "Iomega Buz support" depends on VIDEO_ZORAN help Support for the Iomega Buz MJPEG capture/playback card. config VIDEO_ZORAN_DC10 tristate "Pinnacle/Miro DC10(+) support" depends on VIDEO_ZORAN help Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback card. config VIDEO_ZORAN_DC30 tristate "Pinnacle/Miro DC30(+) support" depends on VIDEO_ZORAN help Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback card. This also supports really old DC10 cards based on the zr36050 MJPEG codec and zr36016 VFE. config VIDEO_ZORAN_LML33 tristate "Linux Media Labs LML33 support" depends on VIDEO_ZORAN help Support for the Linux Media Labs LML33 MJPEG capture/playback card. config VIDEO_ZORAN_LML33R10 tristate "Linux Media Labs LML33R10 support" depends on VIDEO_ZORAN help support for the Linux Media Labs LML33R10 MJPEG capture/playback card. config VIDEO_ZR36120 tristate "Zoran ZR36120/36125 Video For Linux" depends on VIDEO_DEV && PCI && I2C && BROKEN help Support for ZR36120/ZR36125 based frame grabber/overlay boards. This includes the Victor II, WaveWatcher, Video Wonder, Maxi-TV, and Buster boards. Please read the material in for more information. To compile this driver as a module, choose M here: the module will be called zr36120. config VIDEO_MEYE tristate "Sony Vaio Picturebook Motion Eye Video For Linux" depends on VIDEO_DEV && PCI && SONYPI ---help--- This is the video4linux driver for the Motion Eye camera found in the Vaio Picturebook laptops. Please read the material in for more information. If you say Y or M here, you need to say Y or M to "Sony Programmable I/O Control Device" in the character device section. To compile this driver as a module, choose M here: the module will be called meye. source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" depends on VIDEO_DEV && PCI select VIDEO_SAA7146_VV select VIDEO_TUNER ---help--- This is a video4linux driver for the 'Multimedia eXtension Board' TV card by Siemens-Nixdorf. To compile this driver as a module, choose M here: the module will be called mxb. config VIDEO_DPC tristate "Philips-Semiconductors 'dpc7146 demonstration board'" depends on VIDEO_DEV && PCI select VIDEO_SAA7146_VV ---help--- This is a video4linux driver for the 'dpc7146 demonstration board' by Philips-Semiconductors. It's the reference design for SAA7146 bases boards, so if you have some unsupported saa7146 based, analog video card, chances are good that it will work with this skeleton driver. To compile this driver as a module, choose M here: the module will be called dpc7146. config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" depends on VIDEO_DEV && PCI select VIDEO_SAA7146_VV ---help--- This is a video4linux driver for the Hexium HV-PCI6 and Orion frame grabber cards by Hexium. To compile this driver as a module, choose M here: the module will be called hexium_orion. config VIDEO_HEXIUM_GEMINI tristate "Hexium Gemini frame grabber" depends on VIDEO_DEV && PCI select VIDEO_SAA7146_VV ---help--- This is a video4linux driver for the Hexium Gemini frame grabber card by Hexium. Please note that the Gemini Dual card is *not* fully supported. To compile this driver as a module, choose M here: the module will be called hexium_gemini. source "drivers/media/video/cx88/Kconfig" config VIDEO_OVCAMCHIP tristate "OmniVision Camera Chip support" depends on VIDEO_DEV && I2C ---help--- Support for the OmniVision OV6xxx and OV7xxx series of camera chips. This driver is intended to be used with the ov511 and w9968cf USB camera drivers. To compile this driver as a module, choose M here: the module will be called ovcamchip config VIDEO_M32R_AR tristate "AR devices" depends on M32R ---help--- This is a video4linux driver for the Renesas AR (Artificial Retina) camera module. config VIDEO_M32R_AR_M64278 tristate "Use Colour AR module M64278(VGA)" depends on VIDEO_M32R_AR && PLAT_M32700UT ---help--- Say Y here to use the Renesas M64278E-800 camera module, which supports VGA(640x480 pixcels) size of images. config VIDEO_MSP3400 tristate "Micronas MSP34xx audio decoders" depends on VIDEO_DEV && I2C ---help--- Support for the Micronas MSP34xx series of audio decoders. To compile this driver as a module, choose M here: the module will be called msp3400 config VIDEO_CS53L32A tristate "Cirrus Logic CS53L32A audio ADC" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- Support for the Cirrus Logic CS53L32A low voltage stereo A/D converter. To compile this driver as a module, choose M here: the module will be called cs53l32a config VIDEO_WM8775 tristate "Wolfson Microelectronics WM8775 audio ADC" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- Support for the Wolfson Microelectronics WM8775 high performance stereo A/D Converter. To compile this driver as a module, choose M here: the module will be called wm8775 source "drivers/media/video/cx25840/Kconfig" config VIDEO_SAA711X tristate "Philips SAA7113/4/5 video decoders" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- Support for the Philips SAA7113/4/5 video decoders. To compile this driver as a module, choose M here: the module will be called saa7115 config VIDEO_SAA7127 tristate "Philips SAA7127/9 digital video encoders" depends on VIDEO_DEV && I2C && EXPERIMENTAL ---help--- Support for the Philips SAA7127/9 digital video encoders. To compile this driver as a module, choose M here: the module will be called saa7127 # # USB Multimedia device configuration # menu "V4L USB devices" depends on USB && VIDEO_DEV source "drivers/media/video/em28xx/Kconfig" config USB_VICAM tristate "USB 3com HomeConnect (aka vicam) support (EXPERIMENTAL)" depends on USB && VIDEO_DEV && EXPERIMENTAL ---help--- Say Y here if you have 3com homeconnect camera (vicam). To compile this driver as a module, choose M here: the module will be called vicam. config USB_DSBR tristate "D-Link USB FM radio support (EXPERIMENTAL)" depends on USB && VIDEO_DEV && EXPERIMENTAL ---help--- Say Y here if you want to connect this type of radio to your computer's USB port. Note that the audio is not digital, and you must connect the line out connector to a sound card or a set of speakers. To compile this driver as a module, choose M here: the module will be called dsbr100. source "drivers/media/video/et61x251/Kconfig" config USB_IBMCAM tristate "USB IBM (Xirlink) C-it Camera support" depends on USB && VIDEO_DEV ---help--- Say Y here if you want to connect a IBM "C-It" camera, also known as "Xirlink PC Camera" to your computer's USB port. For more information, read . To compile this driver as a module, choose M here: the module will be called ibmcam. This camera has several configuration options which can be specified when you load the module. Read to learn more. config USB_KONICAWC tristate "USB Konica Webcam support" depends on USB && VIDEO_DEV ---help--- Say Y here if you want support for webcams based on a Konica chipset. This is known to work with the Intel YC76 webcam. To compile this driver as a module, choose M here: the module will be called konicawc. config USB_OV511 tristate "USB OV511 Camera support" depends on USB && VIDEO_DEV ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called ov511. config USB_SE401 tristate "USB SE401 Camera support" depends on USB && VIDEO_DEV ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called se401. source "drivers/media/video/sn9c102/Kconfig" config USB_STV680 tristate "USB STV680 (Pencam) Camera support" depends on USB && VIDEO_DEV ---help--- Say Y here if you want to connect this type of camera to your computer's USB port. This includes the Pencam line of cameras. See for more information and for a list of supported cameras. To compile this driver as a module, choose M here: the module will be called stv680. config USB_W9968CF tristate "USB W996[87]CF JPEG Dual Mode Camera support" depends on USB && VIDEO_DEV && I2C select VIDEO_OVCAMCHIP ---help--- Say Y here if you want support for cameras based on OV681 or Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips. This driver has an optional plugin, which is distributed as a separate module only (released under GPL). It allows to use higher resolutions and framerates, but cannot be included in the official Linux kernel for performance purposes. See for more informations. To compile this driver as a module, choose M here: the module will be called w9968cf. source "drivers/media/video/zc0301/Kconfig" config USB_PWC tristate "USB Philips Cameras" depends on USB && VIDEO_DEV ---help--- Say Y or M here if you want to use one of these Philips & OEM webcams: * Philips PCA645, PCA646 * Philips PCVC675, PCVC680, PCVC690 * Philips PCVC720/40, PCVC730, PCVC740, PCVC750 * Askey VC010 * Logitech QuickCam Pro 3000, 4000, 'Zoom', 'Notebook Pro' and 'Orbit'/'Sphere' * Samsung MPC-C10, MPC-C30 * Creative Webcam 5, Pro Ex * SOTEC Afina Eye * Visionite VCS-UC300, VCS-UM100 The PCA635, PCVC665 and PCVC720/20 are not supported by this driver and never will be, but the 665 and 720/20 are supported by other drivers. See for more information and installation instructions. The built-in microphone is enabled by selecting USB Audio support. To compile this driver as a module, choose M here: the module will be called pwc. endmenu # V4L USB devices endmenu