/* * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. * * Description: * MPC832xE MDS board specific routines. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mpc83xx.h" #undef DEBUG #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) #else #define DBG(fmt...) #endif static u8 *bcsr_regs = NULL; /* ************************************************************************ * * Setup the architecture * */ static void __init mpc832x_sys_setup_arch(void) { struct device_node *np; if (ppc_md.progress) ppc_md.progress("mpc832x_sys_setup_arch()", 0); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); if (np != 0) { struct resource res; of_address_to_resource(np, 0, &res); bcsr_regs = ioremap(res.start, res.end - res.start +1); of_node_put(np); } #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) mpc83xx_add_bridge(np); ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif #ifdef CONFIG_QUICC_ENGINE qe_reset(); if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { par_io_init(np); of_node_put(np); for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) par_io_of_config(np); } if ((np = of_find_compatible_node(NULL, "network", "ucc_geth")) != NULL){ /* Reset the Ethernet PHY */ bcsr_regs[9] &= ~0x20; udelay(1000); bcsr_regs[9] |= 0x20; iounmap(bcsr_regs); of_node_put(np); } #endif /* CONFIG_QUICC_ENGINE */ } static struct of_device_id mpc832x_ids[] = { { .type = "soc", }, { .compatible = "soc", }, { .type = "qe", }, {}, }; static int __init mpc832x_declare_of_platform_devices(void) { if (!machine_is(mpc832x_mds)) return 0; /* Publish the QE devices */ of_platform_bus_probe(NULL, mpc832x_ids, NULL); return 0; } device_initcall(mpc832x_declare_of_platform_devices); static void __init mpc832x_sys_init_IRQ(void) { struct device_node *np; np = of_find_node_by_type(NULL, "ipic"); if (!np) return; ipic_init(np, 0); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. */ ipic_set_default_priority(); of_node_put(np); #ifdef CONFIG_QUICC_ENGINE np = of_find_node_by_type(NULL, "qeic"); if (!np) return; qe_ic_init(np, 0); of_node_put(np); #endif /* CONFIG_QUICC_ENGINE */ } #if defined(CONFIG_I2C_MPC) && defined(CONFIG_SENSORS_DS1374) extern ulong ds1374_get_rtc_time(void); extern int ds1374_set_rtc_time(ulong); static int __init mpc832x_rtc_hookup(void) { struct timespec tv; if (!machine_is(mpc832x_mds)) return 0; ppc_md.get_rtc_time = ds1374_get_rtc_time; ppc_md.set_rtc_time = ds1374_set_rtc_time; tv.tv_nsec = 0; tv.tv_sec = (ppc_md.get_rtc_time) (); do_settimeofday(&tv); return 0; } late_initcall(mpc832x_rtc_hookup); #endif /* * Called very early, MMU is off, device-tree isn't unflattened */ static int __init mpc832x_sys_probe(void) { unsigned long root = of_get_flat_dt_root(); return of_flat_dt_is_compatible(root, "MPC832xMDS"); } define_machine(mpc832x_mds) { .name = "MPC832x MDS", .probe = mpc832x_sys_probe, .setup_arch = mpc832x_sys_setup_arch, .init_IRQ = mpc832x_sys_init_IRQ, .get_irq = ipic_get_irq, .restart = mpc83xx_restart, .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, };