/* * Copyright © 2008 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * Authors: * Eric Anholt * */ #include "drmP.h" #include "drm.h" #include "i915_drm.h" #include "i915_drv.h" #include #include #define I915_GEM_GPU_DOMAINS (~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj); static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj); static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write); static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, uint64_t offset, uint64_t size); static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj); static int i915_gem_object_get_pages(struct drm_gem_object *obj); static void i915_gem_object_put_pages(struct drm_gem_object *obj); static int i915_gem_object_wait_rendering(struct drm_gem_object *obj); static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment); static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write); static void i915_gem_clear_fence_reg(struct drm_gem_object *obj); static int i915_gem_evict_something(struct drm_device *dev); static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv); int i915_gem_do_init(struct drm_device *dev, unsigned long start, unsigned long end) { drm_i915_private_t *dev_priv = dev->dev_private; if (start >= end || (start & (PAGE_SIZE - 1)) != 0 || (end & (PAGE_SIZE - 1)) != 0) { return -EINVAL; } drm_mm_init(&dev_priv->mm.gtt_space, start, end - start); dev->gtt_total = (uint32_t) (end - start); return 0; } int i915_gem_init_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_init *args = data; int ret; mutex_lock(&dev->struct_mutex); ret = i915_gem_do_init(dev, args->gtt_start, args->gtt_end); mutex_unlock(&dev->struct_mutex); return ret; } int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_get_aperture *args = data; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; args->aper_size = dev->gtt_total; args->aper_available_size = (args->aper_size - atomic_read(&dev->pin_memory)); return 0; } /** * Creates a new mm object and returns a handle to it. */ int i915_gem_create_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_create *args = data; struct drm_gem_object *obj; int handle, ret; args->size = roundup(args->size, PAGE_SIZE); /* Allocate the new object */ obj = drm_gem_object_alloc(dev, args->size); if (obj == NULL) return -ENOMEM; ret = drm_gem_handle_create(file_priv, obj, &handle); mutex_lock(&dev->struct_mutex); drm_gem_object_handle_unreference(obj); mutex_unlock(&dev->struct_mutex); if (ret) return ret; args->handle = handle; return 0; } static inline int fast_shmem_read(struct page **pages, loff_t page_base, int page_offset, char __user *data, int length) { char __iomem *vaddr; int ret; vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0); if (vaddr == NULL) return -ENOMEM; ret = __copy_to_user_inatomic(data, vaddr + page_offset, length); kunmap_atomic(vaddr, KM_USER0); return ret; } static inline int slow_shmem_copy(struct page *dst_page, int dst_offset, struct page *src_page, int src_offset, int length) { char *dst_vaddr, *src_vaddr; dst_vaddr = kmap_atomic(dst_page, KM_USER0); if (dst_vaddr == NULL) return -ENOMEM; src_vaddr = kmap_atomic(src_page, KM_USER1); if (src_vaddr == NULL) { kunmap_atomic(dst_vaddr, KM_USER0); return -ENOMEM; } memcpy(dst_vaddr + dst_offset, src_vaddr + src_offset, length); kunmap_atomic(src_vaddr, KM_USER1); kunmap_atomic(dst_vaddr, KM_USER0); return 0; } /** * This is the fast shmem pread path, which attempts to copy_from_user directly * from the backing pages of the object to the user's address space. On a * fault, it fails so we can fall back to i915_gem_shmem_pwrite_slow(). */ static int i915_gem_shmem_pread_fast(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pread *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; ssize_t remain; loff_t offset, page_base; char __user *user_data; int page_offset, page_length; int ret; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); if (ret != 0) goto fail_unlock; ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, args->size); if (ret != 0) goto fail_put_pages; obj_priv = obj->driver_private; offset = args->offset; while (remain > 0) { /* Operation in this page * * page_base = page offset within aperture * page_offset = offset within page * page_length = bytes to copy for this page */ page_base = (offset & ~(PAGE_SIZE-1)); page_offset = offset & (PAGE_SIZE-1); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; ret = fast_shmem_read(obj_priv->pages, page_base, page_offset, user_data, page_length); if (ret) goto fail_put_pages; remain -= page_length; user_data += page_length; offset += page_length; } fail_put_pages: i915_gem_object_put_pages(obj); fail_unlock: mutex_unlock(&dev->struct_mutex); return ret; } /** * This is the fallback shmem pread path, which allocates temporary storage * in kernel space to copy_to_user into outside of the struct_mutex, so we * can copy out of the object's backing pages while holding the struct mutex * and not take page faults. */ static int i915_gem_shmem_pread_slow(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pread *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; struct mm_struct *mm = current->mm; struct page **user_pages; ssize_t remain; loff_t offset, pinned_pages, i; loff_t first_data_page, last_data_page, num_pages; int shmem_page_index, shmem_page_offset; int data_page_index, data_page_offset; int page_length; int ret; uint64_t data_ptr = args->data_ptr; remain = args->size; /* Pin the user pages containing the data. We can't fault while * holding the struct mutex, yet we want to hold it while * dereferencing the user data. */ first_data_page = data_ptr / PAGE_SIZE; last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); if (user_pages == NULL) return -ENOMEM; down_read(&mm->mmap_sem); pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, num_pages, 0, 0, user_pages, NULL); up_read(&mm->mmap_sem); if (pinned_pages < num_pages) { ret = -EFAULT; goto fail_put_user_pages; } mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); if (ret != 0) goto fail_unlock; ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset, args->size); if (ret != 0) goto fail_put_pages; obj_priv = obj->driver_private; offset = args->offset; while (remain > 0) { /* Operation in this page * * shmem_page_index = page number within shmem file * shmem_page_offset = offset within page in shmem file * data_page_index = page number in get_user_pages return * data_page_offset = offset with data_page_index page. * page_length = bytes to copy for this page */ shmem_page_index = offset / PAGE_SIZE; shmem_page_offset = offset & ~PAGE_MASK; data_page_index = data_ptr / PAGE_SIZE - first_data_page; data_page_offset = data_ptr & ~PAGE_MASK; page_length = remain; if ((shmem_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - shmem_page_offset; if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; ret = slow_shmem_copy(user_pages[data_page_index], data_page_offset, obj_priv->pages[shmem_page_index], shmem_page_offset, page_length); if (ret) goto fail_put_pages; remain -= page_length; data_ptr += page_length; offset += page_length; } fail_put_pages: i915_gem_object_put_pages(obj); fail_unlock: mutex_unlock(&dev->struct_mutex); fail_put_user_pages: for (i = 0; i < pinned_pages; i++) { SetPageDirty(user_pages[i]); page_cache_release(user_pages[i]); } kfree(user_pages); return ret; } /** * Reads data from the object referenced by handle. * * On error, the contents of *data are undefined. */ int i915_gem_pread_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_pread *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; obj_priv = obj->driver_private; /* Bounds check source. * * XXX: This could use review for overflow issues... */ if (args->offset > obj->size || args->size > obj->size || args->offset + args->size > obj->size) { drm_gem_object_unreference(obj); return -EINVAL; } ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv); if (ret != 0) ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv); drm_gem_object_unreference(obj); return ret; } /* This is the fast write path which cannot handle * page faults in the source data */ static inline int fast_user_write(struct io_mapping *mapping, loff_t page_base, int page_offset, char __user *user_data, int length) { char *vaddr_atomic; unsigned long unwritten; vaddr_atomic = io_mapping_map_atomic_wc(mapping, page_base); unwritten = __copy_from_user_inatomic_nocache(vaddr_atomic + page_offset, user_data, length); io_mapping_unmap_atomic(vaddr_atomic); if (unwritten) return -EFAULT; return 0; } /* Here's the write path which can sleep for * page faults */ static inline int slow_kernel_write(struct io_mapping *mapping, loff_t gtt_base, int gtt_offset, struct page *user_page, int user_offset, int length) { char *src_vaddr, *dst_vaddr; unsigned long unwritten; dst_vaddr = io_mapping_map_atomic_wc(mapping, gtt_base); src_vaddr = kmap_atomic(user_page, KM_USER1); unwritten = __copy_from_user_inatomic_nocache(dst_vaddr + gtt_offset, src_vaddr + user_offset, length); kunmap_atomic(src_vaddr, KM_USER1); io_mapping_unmap_atomic(dst_vaddr); if (unwritten) return -EFAULT; return 0; } static inline int fast_shmem_write(struct page **pages, loff_t page_base, int page_offset, char __user *data, int length) { char __iomem *vaddr; vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0); if (vaddr == NULL) return -ENOMEM; __copy_from_user_inatomic(vaddr + page_offset, data, length); kunmap_atomic(vaddr, KM_USER0); return 0; } /** * This is the fast pwrite path, where we copy the data directly from the * user into the GTT, uncached. */ static int i915_gem_gtt_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; drm_i915_private_t *dev_priv = dev->dev_private; ssize_t remain; loff_t offset, page_base; char __user *user_data; int page_offset, page_length; int ret; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; if (!access_ok(VERIFY_READ, user_data, remain)) return -EFAULT; mutex_lock(&dev->struct_mutex); ret = i915_gem_object_pin(obj, 0); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; } ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto fail; obj_priv = obj->driver_private; offset = obj_priv->gtt_offset + args->offset; while (remain > 0) { /* Operation in this page * * page_base = page offset within aperture * page_offset = offset within page * page_length = bytes to copy for this page */ page_base = (offset & ~(PAGE_SIZE-1)); page_offset = offset & (PAGE_SIZE-1); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; ret = fast_user_write (dev_priv->mm.gtt_mapping, page_base, page_offset, user_data, page_length); /* If we get a fault while copying data, then (presumably) our * source page isn't available. Return the error and we'll * retry in the slow path. */ if (ret) goto fail; remain -= page_length; user_data += page_length; offset += page_length; } fail: i915_gem_object_unpin(obj); mutex_unlock(&dev->struct_mutex); return ret; } /** * This is the fallback GTT pwrite path, which uses get_user_pages to pin * the memory and maps it using kmap_atomic for copying. * * This code resulted in x11perf -rgb10text consuming about 10% more CPU * than using i915_gem_gtt_pwrite_fast on a G45 (32-bit). */ static int i915_gem_gtt_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; drm_i915_private_t *dev_priv = dev->dev_private; ssize_t remain; loff_t gtt_page_base, offset; loff_t first_data_page, last_data_page, num_pages; loff_t pinned_pages, i; struct page **user_pages; struct mm_struct *mm = current->mm; int gtt_page_offset, data_page_offset, data_page_index, page_length; int ret; uint64_t data_ptr = args->data_ptr; remain = args->size; /* Pin the user pages containing the data. We can't fault while * holding the struct mutex, and all of the pwrite implementations * want to hold it while dereferencing the user data. */ first_data_page = data_ptr / PAGE_SIZE; last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); if (user_pages == NULL) return -ENOMEM; down_read(&mm->mmap_sem); pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, num_pages, 0, 0, user_pages, NULL); up_read(&mm->mmap_sem); if (pinned_pages < num_pages) { ret = -EFAULT; goto out_unpin_pages; } mutex_lock(&dev->struct_mutex); ret = i915_gem_object_pin(obj, 0); if (ret) goto out_unlock; ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret) goto out_unpin_object; obj_priv = obj->driver_private; offset = obj_priv->gtt_offset + args->offset; while (remain > 0) { /* Operation in this page * * gtt_page_base = page offset within aperture * gtt_page_offset = offset within page in aperture * data_page_index = page number in get_user_pages return * data_page_offset = offset with data_page_index page. * page_length = bytes to copy for this page */ gtt_page_base = offset & PAGE_MASK; gtt_page_offset = offset & ~PAGE_MASK; data_page_index = data_ptr / PAGE_SIZE - first_data_page; data_page_offset = data_ptr & ~PAGE_MASK; page_length = remain; if ((gtt_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - gtt_page_offset; if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; ret = slow_kernel_write(dev_priv->mm.gtt_mapping, gtt_page_base, gtt_page_offset, user_pages[data_page_index], data_page_offset, page_length); /* If we get a fault while copying data, then (presumably) our * source page isn't available. Return the error and we'll * retry in the slow path. */ if (ret) goto out_unpin_object; remain -= page_length; offset += page_length; data_ptr += page_length; } out_unpin_object: i915_gem_object_unpin(obj); out_unlock: mutex_unlock(&dev->struct_mutex); out_unpin_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); kfree(user_pages); return ret; } /** * This is the fast shmem pwrite path, which attempts to directly * copy_from_user into the kmapped pages backing the object. */ static int i915_gem_shmem_pwrite_fast(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; ssize_t remain; loff_t offset, page_base; char __user *user_data; int page_offset, page_length; int ret; user_data = (char __user *) (uintptr_t) args->data_ptr; remain = args->size; mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); if (ret != 0) goto fail_unlock; ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret != 0) goto fail_put_pages; obj_priv = obj->driver_private; offset = args->offset; obj_priv->dirty = 1; while (remain > 0) { /* Operation in this page * * page_base = page offset within aperture * page_offset = offset within page * page_length = bytes to copy for this page */ page_base = (offset & ~(PAGE_SIZE-1)); page_offset = offset & (PAGE_SIZE-1); page_length = remain; if ((page_offset + remain) > PAGE_SIZE) page_length = PAGE_SIZE - page_offset; ret = fast_shmem_write(obj_priv->pages, page_base, page_offset, user_data, page_length); if (ret) goto fail_put_pages; remain -= page_length; user_data += page_length; offset += page_length; } fail_put_pages: i915_gem_object_put_pages(obj); fail_unlock: mutex_unlock(&dev->struct_mutex); return ret; } /** * This is the fallback shmem pwrite path, which uses get_user_pages to pin * the memory and maps it using kmap_atomic for copying. * * This avoids taking mmap_sem for faulting on the user's address while the * struct_mutex is held. */ static int i915_gem_shmem_pwrite_slow(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; struct mm_struct *mm = current->mm; struct page **user_pages; ssize_t remain; loff_t offset, pinned_pages, i; loff_t first_data_page, last_data_page, num_pages; int shmem_page_index, shmem_page_offset; int data_page_index, data_page_offset; int page_length; int ret; uint64_t data_ptr = args->data_ptr; remain = args->size; /* Pin the user pages containing the data. We can't fault while * holding the struct mutex, and all of the pwrite implementations * want to hold it while dereferencing the user data. */ first_data_page = data_ptr / PAGE_SIZE; last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE; num_pages = last_data_page - first_data_page + 1; user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL); if (user_pages == NULL) return -ENOMEM; down_read(&mm->mmap_sem); pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr, num_pages, 0, 0, user_pages, NULL); up_read(&mm->mmap_sem); if (pinned_pages < num_pages) { ret = -EFAULT; goto fail_put_user_pages; } mutex_lock(&dev->struct_mutex); ret = i915_gem_object_get_pages(obj); if (ret != 0) goto fail_unlock; ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret != 0) goto fail_put_pages; obj_priv = obj->driver_private; offset = args->offset; obj_priv->dirty = 1; while (remain > 0) { /* Operation in this page * * shmem_page_index = page number within shmem file * shmem_page_offset = offset within page in shmem file * data_page_index = page number in get_user_pages return * data_page_offset = offset with data_page_index page. * page_length = bytes to copy for this page */ shmem_page_index = offset / PAGE_SIZE; shmem_page_offset = offset & ~PAGE_MASK; data_page_index = data_ptr / PAGE_SIZE - first_data_page; data_page_offset = data_ptr & ~PAGE_MASK; page_length = remain; if ((shmem_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - shmem_page_offset; if ((data_page_offset + page_length) > PAGE_SIZE) page_length = PAGE_SIZE - data_page_offset; ret = slow_shmem_copy(obj_priv->pages[shmem_page_index], shmem_page_offset, user_pages[data_page_index], data_page_offset, page_length); if (ret) goto fail_put_pages; remain -= page_length; data_ptr += page_length; offset += page_length; } fail_put_pages: i915_gem_object_put_pages(obj); fail_unlock: mutex_unlock(&dev->struct_mutex); fail_put_user_pages: for (i = 0; i < pinned_pages; i++) page_cache_release(user_pages[i]); kfree(user_pages); return ret; } /** * Writes data to the object referenced by handle. * * On error, the contents of the buffer that were to be modified are undefined. */ int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_pwrite *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret = 0; obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; obj_priv = obj->driver_private; /* Bounds check destination. * * XXX: This could use review for overflow issues... */ if (args->offset > obj->size || args->size > obj->size || args->offset + args->size > obj->size) { drm_gem_object_unreference(obj); return -EINVAL; } /* We can only do the GTT pwrite on untiled buffers, as otherwise * it would end up going through the fenced access, and we'll get * different detiling behavior between reading and writing. * pread/pwrite currently are reading and writing from the CPU * perspective, requiring manual detiling by the client. */ if (obj_priv->phys_obj) ret = i915_gem_phys_pwrite(dev, obj, args, file_priv); else if (obj_priv->tiling_mode == I915_TILING_NONE && dev->gtt_total != 0) { ret = i915_gem_gtt_pwrite_fast(dev, obj, args, file_priv); if (ret == -EFAULT) { ret = i915_gem_gtt_pwrite_slow(dev, obj, args, file_priv); } } else { ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv); if (ret == -EFAULT) { ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv); } } #if WATCH_PWRITE if (ret) DRM_INFO("pwrite failed %d\n", ret); #endif drm_gem_object_unreference(obj); return ret; } /** * Called when user space prepares to use an object with the CPU, either * through the mmap ioctl's mapping or a GTT mapping. */ int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_set_domain *args = data; struct drm_gem_object *obj; uint32_t read_domains = args->read_domains; uint32_t write_domain = args->write_domain; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; /* Only handle setting domains to types used by the CPU. */ if (write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) return -EINVAL; if (read_domains & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) return -EINVAL; /* Having something in the write domain implies it's in the read * domain, and only that read domain. Enforce that in the request. */ if (write_domain != 0 && read_domains != write_domain) return -EINVAL; obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; mutex_lock(&dev->struct_mutex); #if WATCH_BUF DRM_INFO("set_domain_ioctl %p(%d), %08x %08x\n", obj, obj->size, read_domains, write_domain); #endif if (read_domains & I915_GEM_DOMAIN_GTT) { ret = i915_gem_object_set_to_gtt_domain(obj, write_domain != 0); /* Silently promote "you're not bound, there was nothing to do" * to success, since the client was just asking us to * make sure everything was done. */ if (ret == -EINVAL) ret = 0; } else { ret = i915_gem_object_set_to_cpu_domain(obj, write_domain != 0); } drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; } /** * Called when user space has done writes to this buffer */ int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_sw_finish *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret = 0; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; mutex_lock(&dev->struct_mutex); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) { mutex_unlock(&dev->struct_mutex); return -EBADF; } #if WATCH_BUF DRM_INFO("%s: sw_finish %d (%p %d)\n", __func__, args->handle, obj, obj->size); #endif obj_priv = obj->driver_private; /* Pinned buffers may be scanout, so flush the cache */ if (obj_priv->pin_count) i915_gem_object_flush_cpu_write_domain(obj); drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; } /** * Maps the contents of an object, returning the address it is mapped * into. * * While the mapping holds a reference on the contents of the object, it doesn't * imply a ref on the object itself. */ int i915_gem_mmap_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_mmap *args = data; struct drm_gem_object *obj; loff_t offset; unsigned long addr; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; offset = args->offset; down_write(¤t->mm->mmap_sem); addr = do_mmap(obj->filp, 0, args->size, PROT_READ | PROT_WRITE, MAP_SHARED, args->offset); up_write(¤t->mm->mmap_sem); mutex_lock(&dev->struct_mutex); drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); if (IS_ERR((void *)addr)) return addr; args->addr_ptr = (uint64_t) addr; return 0; } /** * i915_gem_fault - fault a page into the GTT * vma: VMA in question * vmf: fault info * * The fault handler is set up by drm_gem_mmap() when a object is GTT mapped * from userspace. The fault handler takes care of binding the object to * the GTT (if needed), allocating and programming a fence register (again, * only if needed based on whether the old reg is still valid or the object * is tiled) and inserting a new PTE into the faulting process. * * Note that the faulting process may involve evicting existing objects * from the GTT and/or fence registers to make room. So performance may * suffer if the GTT working set is large or there are few fence registers * left. */ int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct drm_gem_object *obj = vma->vm_private_data; struct drm_device *dev = obj->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; pgoff_t page_offset; unsigned long pfn; int ret = 0; bool write = !!(vmf->flags & FAULT_FLAG_WRITE); /* We don't use vmf->pgoff since that has the fake offset */ page_offset = ((unsigned long)vmf->virtual_address - vma->vm_start) >> PAGE_SHIFT; /* Now bind it into the GTT if needed */ mutex_lock(&dev->struct_mutex); if (!obj_priv->gtt_space) { ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment); if (ret) { mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } list_add(&obj_priv->list, &dev_priv->mm.inactive_list); } /* Need a new fence register? */ if (obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj, write); if (ret) { mutex_unlock(&dev->struct_mutex); return VM_FAULT_SIGBUS; } } pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) + page_offset; /* Finally, remap it using the new GTT offset */ ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn); mutex_unlock(&dev->struct_mutex); switch (ret) { case -ENOMEM: case -EAGAIN: return VM_FAULT_OOM; case -EFAULT: return VM_FAULT_SIGBUS; default: return VM_FAULT_NOPAGE; } } /** * i915_gem_create_mmap_offset - create a fake mmap offset for an object * @obj: obj in question * * GEM memory mapping works by handing back to userspace a fake mmap offset * it can use in a subsequent mmap(2) call. The DRM core code then looks * up the object based on the offset and sets up the various memory mapping * structures. * * This routine allocates and attaches a fake offset for @obj. */ static int i915_gem_create_mmap_offset(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_gem_mm *mm = dev->mm_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_map_list *list; struct drm_map *map; int ret = 0; /* Set the object up for mmap'ing */ list = &obj->map_list; list->map = drm_calloc(1, sizeof(struct drm_map_list), DRM_MEM_DRIVER); if (!list->map) return -ENOMEM; map = list->map; map->type = _DRM_GEM; map->size = obj->size; map->handle = obj; /* Get a DRM GEM mmap offset allocated... */ list->file_offset_node = drm_mm_search_free(&mm->offset_manager, obj->size / PAGE_SIZE, 0, 0); if (!list->file_offset_node) { DRM_ERROR("failed to allocate offset for bo %d\n", obj->name); ret = -ENOMEM; goto out_free_list; } list->file_offset_node = drm_mm_get_block(list->file_offset_node, obj->size / PAGE_SIZE, 0); if (!list->file_offset_node) { ret = -ENOMEM; goto out_free_list; } list->hash.key = list->file_offset_node->start; if (drm_ht_insert_item(&mm->offset_hash, &list->hash)) { DRM_ERROR("failed to add to map hash\n"); goto out_free_mm; } /* By now we should be all set, any drm_mmap request on the offset * below will get to our mmap & fault handler */ obj_priv->mmap_offset = ((uint64_t) list->hash.key) << PAGE_SHIFT; return 0; out_free_mm: drm_mm_put_block(list->file_offset_node); out_free_list: drm_free(list->map, sizeof(struct drm_map_list), DRM_MEM_DRIVER); return ret; } static void i915_gem_free_mmap_offset(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_gem_mm *mm = dev->mm_private; struct drm_map_list *list; list = &obj->map_list; drm_ht_remove_item(&mm->offset_hash, &list->hash); if (list->file_offset_node) { drm_mm_put_block(list->file_offset_node); list->file_offset_node = NULL; } if (list->map) { drm_free(list->map, sizeof(struct drm_map), DRM_MEM_DRIVER); list->map = NULL; } obj_priv->mmap_offset = 0; } /** * i915_gem_get_gtt_alignment - return required GTT alignment for an object * @obj: object to check * * Return the required GTT alignment for an object, taking into account * potential fence register mapping if needed. */ static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; int start, i; /* * Minimum alignment is 4k (GTT page size), but might be greater * if a fence register is needed for the object. */ if (IS_I965G(dev) || obj_priv->tiling_mode == I915_TILING_NONE) return 4096; /* * Previous chips need to be aligned to the size of the smallest * fence register that can contain the object. */ if (IS_I9XX(dev)) start = 1024*1024; else start = 512*1024; for (i = start; i < obj->size; i <<= 1) ; return i; } /** * i915_gem_mmap_gtt_ioctl - prepare an object for GTT mmap'ing * @dev: DRM device * @data: GTT mapping ioctl data * @file_priv: GEM object info * * Simply returns the fake offset to userspace so it can mmap it. * The mmap call will end up in drm_gem_mmap(), which will set things * up so we can get faults in the handler above. * * The fault handler will take care of binding the object into the GTT * (since it may have been evicted to make room for something), allocating * a fence register, and mapping the appropriate aperture address into * userspace. */ int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_mmap_gtt *args = data; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; if (!(dev->driver->driver_features & DRIVER_GEM)) return -ENODEV; obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) return -EBADF; mutex_lock(&dev->struct_mutex); obj_priv = obj->driver_private; if (!obj_priv->mmap_offset) { ret = i915_gem_create_mmap_offset(obj); if (ret) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; } } args->offset = obj_priv->mmap_offset; obj_priv->gtt_alignment = i915_gem_get_gtt_alignment(obj); /* Make sure the alignment is correct for fence regs etc */ if (obj_priv->agp_mem && (obj_priv->gtt_offset & (obj_priv->gtt_alignment - 1))) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } /* * Pull it into the GTT so that we have a page list (makes the * initial fault faster and any subsequent flushing possible). */ if (!obj_priv->agp_mem) { ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment); if (ret) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; } list_add(&obj_priv->list, &dev_priv->mm.inactive_list); } drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return 0; } static void i915_gem_object_put_pages(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int page_count = obj->size / PAGE_SIZE; int i; BUG_ON(obj_priv->pages_refcount == 0); if (--obj_priv->pages_refcount != 0) return; for (i = 0; i < page_count; i++) if (obj_priv->pages[i] != NULL) { if (obj_priv->dirty) set_page_dirty(obj_priv->pages[i]); mark_page_accessed(obj_priv->pages[i]); page_cache_release(obj_priv->pages[i]); } obj_priv->dirty = 0; drm_free(obj_priv->pages, page_count * sizeof(struct page *), DRM_MEM_DRIVER); obj_priv->pages = NULL; } static void i915_gem_object_move_to_active(struct drm_gem_object *obj, uint32_t seqno) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; /* Add a reference if we're newly entering the active list. */ if (!obj_priv->active) { drm_gem_object_reference(obj); obj_priv->active = 1; } /* Move from whatever list we were on to the tail of execution. */ list_move_tail(&obj_priv->list, &dev_priv->mm.active_list); obj_priv->last_rendering_seqno = seqno; } static void i915_gem_object_move_to_flushing(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; BUG_ON(!obj_priv->active); list_move_tail(&obj_priv->list, &dev_priv->mm.flushing_list); obj_priv->last_rendering_seqno = 0; } static void i915_gem_object_move_to_inactive(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; i915_verify_inactive(dev, __FILE__, __LINE__); if (obj_priv->pin_count != 0) list_del_init(&obj_priv->list); else list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); obj_priv->last_rendering_seqno = 0; if (obj_priv->active) { obj_priv->active = 0; drm_gem_object_unreference(obj); } i915_verify_inactive(dev, __FILE__, __LINE__); } /** * Creates a new sequence number, emitting a write of it to the status page * plus an interrupt, which will trigger i915_user_interrupt_handler. * * Must be called with struct_lock held. * * Returned sequence numbers are nonzero on success. */ static uint32_t i915_add_request(struct drm_device *dev, uint32_t flush_domains) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_request *request; uint32_t seqno; int was_empty; RING_LOCALS; request = drm_calloc(1, sizeof(*request), DRM_MEM_DRIVER); if (request == NULL) return 0; /* Grab the seqno we're going to make this request be, and bump the * next (skipping 0 so it can be the reserved no-seqno value). */ seqno = dev_priv->mm.next_gem_seqno; dev_priv->mm.next_gem_seqno++; if (dev_priv->mm.next_gem_seqno == 0) dev_priv->mm.next_gem_seqno++; BEGIN_LP_RING(4); OUT_RING(MI_STORE_DWORD_INDEX); OUT_RING(I915_GEM_HWS_INDEX << MI_STORE_DWORD_INDEX_SHIFT); OUT_RING(seqno); OUT_RING(MI_USER_INTERRUPT); ADVANCE_LP_RING(); DRM_DEBUG("%d\n", seqno); request->seqno = seqno; request->emitted_jiffies = jiffies; was_empty = list_empty(&dev_priv->mm.request_list); list_add_tail(&request->list, &dev_priv->mm.request_list); /* Associate any objects on the flushing list matching the write * domain we're flushing with our flush. */ if (flush_domains != 0) { struct drm_i915_gem_object *obj_priv, *next; list_for_each_entry_safe(obj_priv, next, &dev_priv->mm.flushing_list, list) { struct drm_gem_object *obj = obj_priv->obj; if ((obj->write_domain & flush_domains) == obj->write_domain) { obj->write_domain = 0; i915_gem_object_move_to_active(obj, seqno); } } } if (was_empty && !dev_priv->mm.suspended) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); return seqno; } /** * Command execution barrier * * Ensures that all commands in the ring are finished * before signalling the CPU */ static uint32_t i915_retire_commands(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; uint32_t cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; uint32_t flush_domains = 0; RING_LOCALS; /* The sampler always gets flushed on i965 (sigh) */ if (IS_I965G(dev)) flush_domains |= I915_GEM_DOMAIN_SAMPLER; BEGIN_LP_RING(2); OUT_RING(cmd); OUT_RING(0); /* noop */ ADVANCE_LP_RING(); return flush_domains; } /** * Moves buffers associated only with the given active seqno from the active * to inactive list, potentially freeing them. */ static void i915_gem_retire_request(struct drm_device *dev, struct drm_i915_gem_request *request) { drm_i915_private_t *dev_priv = dev->dev_private; /* Move any buffers on the active list that are no longer referenced * by the ringbuffer to the flushing/inactive lists as appropriate. */ while (!list_empty(&dev_priv->mm.active_list)) { struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; obj_priv = list_first_entry(&dev_priv->mm.active_list, struct drm_i915_gem_object, list); obj = obj_priv->obj; /* If the seqno being retired doesn't match the oldest in the * list, then the oldest in the list must still be newer than * this seqno. */ if (obj_priv->last_rendering_seqno != request->seqno) return; #if WATCH_LRU DRM_INFO("%s: retire %d moves to inactive list %p\n", __func__, request->seqno, obj); #endif if (obj->write_domain != 0) i915_gem_object_move_to_flushing(obj); else i915_gem_object_move_to_inactive(obj); } } /** * Returns true if seq1 is later than seq2. */ static int i915_seqno_passed(uint32_t seq1, uint32_t seq2) { return (int32_t)(seq1 - seq2) >= 0; } uint32_t i915_get_gem_seqno(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; return READ_HWSP(dev_priv, I915_GEM_HWS_INDEX); } /** * This function clears the request list as sequence numbers are passed. */ void i915_gem_retire_requests(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; uint32_t seqno; if (!dev_priv->hw_status_page) return; seqno = i915_get_gem_seqno(dev); while (!list_empty(&dev_priv->mm.request_list)) { struct drm_i915_gem_request *request; uint32_t retiring_seqno; request = list_first_entry(&dev_priv->mm.request_list, struct drm_i915_gem_request, list); retiring_seqno = request->seqno; if (i915_seqno_passed(seqno, retiring_seqno) || dev_priv->mm.wedged) { i915_gem_retire_request(dev, request); list_del(&request->list); drm_free(request, sizeof(*request), DRM_MEM_DRIVER); } else break; } } void i915_gem_retire_work_handler(struct work_struct *work) { drm_i915_private_t *dev_priv; struct drm_device *dev; dev_priv = container_of(work, drm_i915_private_t, mm.retire_work.work); dev = dev_priv->dev; mutex_lock(&dev->struct_mutex); i915_gem_retire_requests(dev); if (!dev_priv->mm.suspended && !list_empty(&dev_priv->mm.request_list)) schedule_delayed_work(&dev_priv->mm.retire_work, HZ); mutex_unlock(&dev->struct_mutex); } /** * Waits for a sequence number to be signaled, and cleans up the * request and object lists appropriately for that event. */ static int i915_wait_request(struct drm_device *dev, uint32_t seqno) { drm_i915_private_t *dev_priv = dev->dev_private; int ret = 0; BUG_ON(seqno == 0); if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) { dev_priv->mm.waiting_gem_seqno = seqno; i915_user_irq_get(dev); ret = wait_event_interruptible(dev_priv->irq_queue, i915_seqno_passed(i915_get_gem_seqno(dev), seqno) || dev_priv->mm.wedged); i915_user_irq_put(dev); dev_priv->mm.waiting_gem_seqno = 0; } if (dev_priv->mm.wedged) ret = -EIO; if (ret && ret != -ERESTARTSYS) DRM_ERROR("%s returns %d (awaiting %d at %d)\n", __func__, ret, seqno, i915_get_gem_seqno(dev)); /* Directly dispatch request retiring. While we have the work queue * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. */ if (ret == 0) i915_gem_retire_requests(dev); return ret; } static void i915_gem_flush(struct drm_device *dev, uint32_t invalidate_domains, uint32_t flush_domains) { drm_i915_private_t *dev_priv = dev->dev_private; uint32_t cmd; RING_LOCALS; #if WATCH_EXEC DRM_INFO("%s: invalidate %08x flush %08x\n", __func__, invalidate_domains, flush_domains); #endif if (flush_domains & I915_GEM_DOMAIN_CPU) drm_agp_chipset_flush(dev); if ((invalidate_domains | flush_domains) & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) { /* * read/write caches: * * I915_GEM_DOMAIN_RENDER is always invalidated, but is * only flushed if MI_NO_WRITE_FLUSH is unset. On 965, it is * also flushed at 2d versus 3d pipeline switches. * * read-only caches: * * I915_GEM_DOMAIN_SAMPLER is flushed on pre-965 if * MI_READ_FLUSH is set, and is always flushed on 965. * * I915_GEM_DOMAIN_COMMAND may not exist? * * I915_GEM_DOMAIN_INSTRUCTION, which exists on 965, is * invalidated when MI_EXE_FLUSH is set. * * I915_GEM_DOMAIN_VERTEX, which exists on 965, is * invalidated with every MI_FLUSH. * * TLBs: * * On 965, TLBs associated with I915_GEM_DOMAIN_COMMAND * and I915_GEM_DOMAIN_CPU in are invalidated at PTE write and * I915_GEM_DOMAIN_RENDER and I915_GEM_DOMAIN_SAMPLER * are flushed at any MI_FLUSH. */ cmd = MI_FLUSH | MI_NO_WRITE_FLUSH; if ((invalidate_domains|flush_domains) & I915_GEM_DOMAIN_RENDER) cmd &= ~MI_NO_WRITE_FLUSH; if (!IS_I965G(dev)) { /* * On the 965, the sampler cache always gets flushed * and this bit is reserved. */ if (invalidate_domains & I915_GEM_DOMAIN_SAMPLER) cmd |= MI_READ_FLUSH; } if (invalidate_domains & I915_GEM_DOMAIN_INSTRUCTION) cmd |= MI_EXE_FLUSH; #if WATCH_EXEC DRM_INFO("%s: queue flush %08x to ring\n", __func__, cmd); #endif BEGIN_LP_RING(2); OUT_RING(cmd); OUT_RING(0); /* noop */ ADVANCE_LP_RING(); } } /** * Ensures that all rendering to the object has completed and the object is * safe to unbind from the GTT or access from the CPU. */ static int i915_gem_object_wait_rendering(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; /* This function only exists to support waiting for existing rendering, * not for emitting required flushes. */ BUG_ON((obj->write_domain & I915_GEM_GPU_DOMAINS) != 0); /* If there is rendering queued on the buffer being evicted, wait for * it. */ if (obj_priv->active) { #if WATCH_BUF DRM_INFO("%s: object %p wait for seqno %08x\n", __func__, obj, obj_priv->last_rendering_seqno); #endif ret = i915_wait_request(dev, obj_priv->last_rendering_seqno); if (ret != 0) return ret; } return 0; } /** * Unbinds an object from the GTT aperture. */ int i915_gem_object_unbind(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; loff_t offset; int ret = 0; #if WATCH_BUF DRM_INFO("%s:%d %p\n", __func__, __LINE__, obj); DRM_INFO("gtt_space %p\n", obj_priv->gtt_space); #endif if (obj_priv->gtt_space == NULL) return 0; if (obj_priv->pin_count != 0) { DRM_ERROR("Attempting to unbind pinned buffer\n"); return -EINVAL; } /* Move the object to the CPU domain to ensure that * any possible CPU writes while it's not in the GTT * are flushed when we go to remap it. This will * also ensure that all pending GPU writes are finished * before we unbind. */ ret = i915_gem_object_set_to_cpu_domain(obj, 1); if (ret) { if (ret != -ERESTARTSYS) DRM_ERROR("set_domain failed: %d\n", ret); return ret; } if (obj_priv->agp_mem != NULL) { drm_unbind_agp(obj_priv->agp_mem); drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE); obj_priv->agp_mem = NULL; } BUG_ON(obj_priv->active); /* blow away mappings if mapped through GTT */ offset = ((loff_t) obj->map_list.hash.key) << PAGE_SHIFT; if (dev->dev_mapping) unmap_mapping_range(dev->dev_mapping, offset, obj->size, 1); if (obj_priv->fence_reg != I915_FENCE_REG_NONE) i915_gem_clear_fence_reg(obj); i915_gem_object_put_pages(obj); if (obj_priv->gtt_space) { atomic_dec(&dev->gtt_count); atomic_sub(obj->size, &dev->gtt_memory); drm_mm_put_block(obj_priv->gtt_space); obj_priv->gtt_space = NULL; } /* Remove ourselves from the LRU list if present. */ if (!list_empty(&obj_priv->list)) list_del_init(&obj_priv->list); return 0; } static int i915_gem_evict_something(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret = 0; for (;;) { /* If there's an inactive buffer available now, grab it * and be done. */ if (!list_empty(&dev_priv->mm.inactive_list)) { obj_priv = list_first_entry(&dev_priv->mm.inactive_list, struct drm_i915_gem_object, list); obj = obj_priv->obj; BUG_ON(obj_priv->pin_count != 0); #if WATCH_LRU DRM_INFO("%s: evicting %p\n", __func__, obj); #endif BUG_ON(obj_priv->active); /* Wait on the rendering and unbind the buffer. */ ret = i915_gem_object_unbind(obj); break; } /* If we didn't get anything, but the ring is still processing * things, wait for one of those things to finish and hopefully * leave us a buffer to evict. */ if (!list_empty(&dev_priv->mm.request_list)) { struct drm_i915_gem_request *request; request = list_first_entry(&dev_priv->mm.request_list, struct drm_i915_gem_request, list); ret = i915_wait_request(dev, request->seqno); if (ret) break; /* if waiting caused an object to become inactive, * then loop around and wait for it. Otherwise, we * assume that waiting freed and unbound something, * so there should now be some space in the GTT */ if (!list_empty(&dev_priv->mm.inactive_list)) continue; break; } /* If we didn't have anything on the request list but there * are buffers awaiting a flush, emit one and try again. * When we wait on it, those buffers waiting for that flush * will get moved to inactive. */ if (!list_empty(&dev_priv->mm.flushing_list)) { obj_priv = list_first_entry(&dev_priv->mm.flushing_list, struct drm_i915_gem_object, list); obj = obj_priv->obj; i915_gem_flush(dev, obj->write_domain, obj->write_domain); i915_add_request(dev, obj->write_domain); obj = NULL; continue; } DRM_ERROR("inactive empty %d request empty %d " "flushing empty %d\n", list_empty(&dev_priv->mm.inactive_list), list_empty(&dev_priv->mm.request_list), list_empty(&dev_priv->mm.flushing_list)); /* If we didn't do any of the above, there's nothing to be done * and we just can't fit it in. */ return -ENOMEM; } return ret; } static int i915_gem_evict_everything(struct drm_device *dev) { int ret; for (;;) { ret = i915_gem_evict_something(dev); if (ret != 0) break; } if (ret == -ENOMEM) return 0; return ret; } static int i915_gem_object_get_pages(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int page_count, i; struct address_space *mapping; struct inode *inode; struct page *page; int ret; if (obj_priv->pages_refcount++ != 0) return 0; /* Get the list of pages out of our struct file. They'll be pinned * at this point until we release them. */ page_count = obj->size / PAGE_SIZE; BUG_ON(obj_priv->pages != NULL); obj_priv->pages = drm_calloc(page_count, sizeof(struct page *), DRM_MEM_DRIVER); if (obj_priv->pages == NULL) { DRM_ERROR("Faled to allocate page list\n"); obj_priv->pages_refcount--; return -ENOMEM; } inode = obj->filp->f_path.dentry->d_inode; mapping = inode->i_mapping; for (i = 0; i < page_count; i++) { page = read_mapping_page(mapping, i, NULL); if (IS_ERR(page)) { ret = PTR_ERR(page); DRM_ERROR("read_mapping_page failed: %d\n", ret); i915_gem_object_put_pages(obj); return ret; } obj_priv->pages[i] = page; } return 0; } static void i965_write_fence_reg(struct drm_i915_fence_reg *reg) { struct drm_gem_object *obj = reg->obj; struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; uint64_t val; val = (uint64_t)((obj_priv->gtt_offset + obj->size - 4096) & 0xfffff000) << 32; val |= obj_priv->gtt_offset & 0xfffff000; val |= ((obj_priv->stride / 128) - 1) << I965_FENCE_PITCH_SHIFT; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I965_FENCE_TILING_Y_SHIFT; val |= I965_FENCE_REG_VALID; I915_WRITE64(FENCE_REG_965_0 + (regnum * 8), val); } static void i915_write_fence_reg(struct drm_i915_fence_reg *reg) { struct drm_gem_object *obj = reg->obj; struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; int tile_width; uint32_t fence_reg, val; uint32_t pitch_val; if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { WARN(1, "%s: object 0x%08x not 1M or size (0x%zx) aligned\n", __func__, obj_priv->gtt_offset, obj->size); return; } if (obj_priv->tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)) tile_width = 128; else tile_width = 512; /* Note: pitch better be a power of two tile widths */ pitch_val = obj_priv->stride / tile_width; pitch_val = ffs(pitch_val) - 1; val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; val |= I915_FENCE_SIZE_BITS(obj->size); val |= pitch_val << I830_FENCE_PITCH_SHIFT; val |= I830_FENCE_REG_VALID; if (regnum < 8) fence_reg = FENCE_REG_830_0 + (regnum * 4); else fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4); I915_WRITE(fence_reg, val); } static void i830_write_fence_reg(struct drm_i915_fence_reg *reg) { struct drm_gem_object *obj = reg->obj; struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; int regnum = obj_priv->fence_reg; uint32_t val; uint32_t pitch_val; if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) || (obj_priv->gtt_offset & (obj->size - 1))) { WARN(1, "%s: object 0x%08x not 1M or size aligned\n", __func__, obj_priv->gtt_offset); return; } pitch_val = (obj_priv->stride / 128) - 1; val = obj_priv->gtt_offset; if (obj_priv->tiling_mode == I915_TILING_Y) val |= 1 << I830_FENCE_TILING_Y_SHIFT; val |= I830_FENCE_SIZE_BITS(obj->size); val |= pitch_val << I830_FENCE_PITCH_SHIFT; val |= I830_FENCE_REG_VALID; I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val); } /** * i915_gem_object_get_fence_reg - set up a fence reg for an object * @obj: object to map through a fence reg * @write: object is about to be written * * When mapping objects through the GTT, userspace wants to be able to write * to them without having to worry about swizzling if the object is tiled. * * This function walks the fence regs looking for a free one for @obj, * stealing one if it can't find any. * * It then sets up the reg based on the object's properties: address, pitch * and tiling format. */ static int i915_gem_object_get_fence_reg(struct drm_gem_object *obj, bool write) { struct drm_device *dev = obj->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_i915_fence_reg *reg = NULL; struct drm_i915_gem_object *old_obj_priv = NULL; int i, ret, avail; switch (obj_priv->tiling_mode) { case I915_TILING_NONE: WARN(1, "allocating a fence for non-tiled object?\n"); break; case I915_TILING_X: if (!obj_priv->stride) return -EINVAL; WARN((obj_priv->stride & (512 - 1)), "object 0x%08x is X tiled but has non-512B pitch\n", obj_priv->gtt_offset); break; case I915_TILING_Y: if (!obj_priv->stride) return -EINVAL; WARN((obj_priv->stride & (128 - 1)), "object 0x%08x is Y tiled but has non-128B pitch\n", obj_priv->gtt_offset); break; } /* First try to find a free reg */ try_again: avail = 0; for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { reg = &dev_priv->fence_regs[i]; if (!reg->obj) break; old_obj_priv = reg->obj->driver_private; if (!old_obj_priv->pin_count) avail++; } /* None available, try to steal one or wait for a user to finish */ if (i == dev_priv->num_fence_regs) { uint32_t seqno = dev_priv->mm.next_gem_seqno; loff_t offset; if (avail == 0) return -ENOMEM; for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) { uint32_t this_seqno; reg = &dev_priv->fence_regs[i]; old_obj_priv = reg->obj->driver_private; if (old_obj_priv->pin_count) continue; /* i915 uses fences for GPU access to tiled buffers */ if (IS_I965G(dev) || !old_obj_priv->active) break; /* find the seqno of the first available fence */ this_seqno = old_obj_priv->last_rendering_seqno; if (this_seqno != 0 && reg->obj->write_domain == 0 && i915_seqno_passed(seqno, this_seqno)) seqno = this_seqno; } /* * Now things get ugly... we have to wait for one of the * objects to finish before trying again. */ if (i == dev_priv->num_fence_regs) { if (seqno == dev_priv->mm.next_gem_seqno) { i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS); seqno = i915_add_request(dev, I915_GEM_GPU_DOMAINS); if (seqno == 0) return -ENOMEM; } ret = i915_wait_request(dev, seqno); if (ret) return ret; goto try_again; } BUG_ON(old_obj_priv->active || (reg->obj->write_domain & I915_GEM_GPU_DOMAINS)); /* * Zap this virtual mapping so we can set up a fence again * for this object next time we need it. */ offset = ((loff_t) reg->obj->map_list.hash.key) << PAGE_SHIFT; if (dev->dev_mapping) unmap_mapping_range(dev->dev_mapping, offset, reg->obj->size, 1); old_obj_priv->fence_reg = I915_FENCE_REG_NONE; } obj_priv->fence_reg = i; reg->obj = obj; if (IS_I965G(dev)) i965_write_fence_reg(reg); else if (IS_I9XX(dev)) i915_write_fence_reg(reg); else i830_write_fence_reg(reg); return 0; } /** * i915_gem_clear_fence_reg - clear out fence register info * @obj: object to clear * * Zeroes out the fence register itself and clears out the associated * data structures in dev_priv and obj_priv. */ static void i915_gem_clear_fence_reg(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; if (IS_I965G(dev)) I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0); else { uint32_t fence_reg; if (obj_priv->fence_reg < 8) fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4; else fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg - 8) * 4; I915_WRITE(fence_reg, 0); } dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL; obj_priv->fence_reg = I915_FENCE_REG_NONE; } /** * Finds free space in the GTT aperture and binds the object there. */ static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj, unsigned alignment) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; struct drm_mm_node *free_space; int page_count, ret; if (dev_priv->mm.suspended) return -EBUSY; if (alignment == 0) alignment = i915_gem_get_gtt_alignment(obj); if (alignment & (PAGE_SIZE - 1)) { DRM_ERROR("Invalid object alignment requested %u\n", alignment); return -EINVAL; } search_free: free_space = drm_mm_search_free(&dev_priv->mm.gtt_space, obj->size, alignment, 0); if (free_space != NULL) { obj_priv->gtt_space = drm_mm_get_block(free_space, obj->size, alignment); if (obj_priv->gtt_space != NULL) { obj_priv->gtt_space->private = obj; obj_priv->gtt_offset = obj_priv->gtt_space->start; } } if (obj_priv->gtt_space == NULL) { /* If the gtt is empty and we're still having trouble * fitting our object in, we're out of memory. */ #if WATCH_LRU DRM_INFO("%s: GTT full, evicting something\n", __func__); #endif if (list_empty(&dev_priv->mm.inactive_list) && list_empty(&dev_priv->mm.flushing_list) && list_empty(&dev_priv->mm.active_list)) { DRM_ERROR("GTT full, but LRU list empty\n"); return -ENOMEM; } ret = i915_gem_evict_something(dev); if (ret != 0) { if (ret != -ERESTARTSYS) DRM_ERROR("Failed to evict a buffer %d\n", ret); return ret; } goto search_free; } #if WATCH_BUF DRM_INFO("Binding object of size %d at 0x%08x\n", obj->size, obj_priv->gtt_offset); #endif ret = i915_gem_object_get_pages(obj); if (ret) { drm_mm_put_block(obj_priv->gtt_space); obj_priv->gtt_space = NULL; return ret; } page_count = obj->size / PAGE_SIZE; /* Create an AGP memory structure pointing at our pages, and bind it * into the GTT. */ obj_priv->agp_mem = drm_agp_bind_pages(dev, obj_priv->pages, page_count, obj_priv->gtt_offset, obj_priv->agp_type); if (obj_priv->agp_mem == NULL) { i915_gem_object_put_pages(obj); drm_mm_put_block(obj_priv->gtt_space); obj_priv->gtt_space = NULL; return -ENOMEM; } atomic_inc(&dev->gtt_count); atomic_add(obj->size, &dev->gtt_memory); /* Assert that the object is not currently in any GPU domain. As it * wasn't in the GTT, there shouldn't be any way it could have been in * a GPU cache */ BUG_ON(obj->read_domains & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); BUG_ON(obj->write_domain & ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); return 0; } void i915_gem_clflush_object(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv = obj->driver_private; /* If we don't have a page list set up, then we're not pinned * to GPU, and we can ignore the cache flush because it'll happen * again at bind time. */ if (obj_priv->pages == NULL) return; drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE); } /** Flushes any GPU write domain for the object if it's dirty. */ static void i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; uint32_t seqno; if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0) return; /* Queue the GPU write cache flushing we need. */ i915_gem_flush(dev, 0, obj->write_domain); seqno = i915_add_request(dev, obj->write_domain); obj->write_domain = 0; i915_gem_object_move_to_active(obj, seqno); } /** Flushes the GTT write domain for the object if it's dirty. */ static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj) { if (obj->write_domain != I915_GEM_DOMAIN_GTT) return; /* No actual flushing is required for the GTT write domain. Writes * to it immediately go to main memory as far as we know, so there's * no chipset flush. It also doesn't land in render cache. */ obj->write_domain = 0; } /** Flushes the CPU write domain for the object if it's dirty. */ static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; if (obj->write_domain != I915_GEM_DOMAIN_CPU) return; i915_gem_clflush_object(obj); drm_agp_chipset_flush(dev); obj->write_domain = 0; } /** * Moves a single object to the GTT read, and possibly write domain. * * This function returns when the move is complete, including waiting on * flushes to occur. */ int i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; /* Not valid to be called on unbound objects. */ if (obj_priv->gtt_space == NULL) return -EINVAL; i915_gem_object_flush_gpu_write_domain(obj); /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); if (ret != 0) return ret; /* If we're writing through the GTT domain, then CPU and GPU caches * will need to be invalidated at next use. */ if (write) obj->read_domains &= I915_GEM_DOMAIN_GTT; i915_gem_object_flush_cpu_write_domain(obj); /* It should now be out of any other write domains, and we can update * the domain values for our changes. */ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_GTT) != 0); obj->read_domains |= I915_GEM_DOMAIN_GTT; if (write) { obj->write_domain = I915_GEM_DOMAIN_GTT; obj_priv->dirty = 1; } return 0; } /** * Moves a single object to the CPU read, and possibly write domain. * * This function returns when the move is complete, including waiting on * flushes to occur. */ static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write) { struct drm_device *dev = obj->dev; int ret; i915_gem_object_flush_gpu_write_domain(obj); /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); if (ret != 0) return ret; i915_gem_object_flush_gtt_write_domain(obj); /* If we have a partially-valid cache of the object in the CPU, * finish invalidating it and free the per-page flags. */ i915_gem_object_set_to_full_cpu_read_domain(obj); /* Flush the CPU cache if it's still invalid. */ if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) { i915_gem_clflush_object(obj); drm_agp_chipset_flush(dev); obj->read_domains |= I915_GEM_DOMAIN_CPU; } /* It should now be out of any other write domains, and we can update * the domain values for our changes. */ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); /* If we're writing through the CPU, then the GPU read domains will * need to be invalidated at next use. */ if (write) { obj->read_domains &= I915_GEM_DOMAIN_CPU; obj->write_domain = I915_GEM_DOMAIN_CPU; } return 0; } /* * Set the next domain for the specified object. This * may not actually perform the necessary flushing/invaliding though, * as that may want to be batched with other set_domain operations * * This is (we hope) the only really tricky part of gem. The goal * is fairly simple -- track which caches hold bits of the object * and make sure they remain coherent. A few concrete examples may * help to explain how it works. For shorthand, we use the notation * (read_domains, write_domain), e.g. (CPU, CPU) to indicate the * a pair of read and write domain masks. * * Case 1: the batch buffer * * 1. Allocated * 2. Written by CPU * 3. Mapped to GTT * 4. Read by GPU * 5. Unmapped from GTT * 6. Freed * * Let's take these a step at a time * * 1. Allocated * Pages allocated from the kernel may still have * cache contents, so we set them to (CPU, CPU) always. * 2. Written by CPU (using pwrite) * The pwrite function calls set_domain (CPU, CPU) and * this function does nothing (as nothing changes) * 3. Mapped by GTT * This function asserts that the object is not * currently in any GPU-based read or write domains * 4. Read by GPU * i915_gem_execbuffer calls set_domain (COMMAND, 0). * As write_domain is zero, this function adds in the * current read domains (CPU+COMMAND, 0). * flush_domains is set to CPU. * invalidate_domains is set to COMMAND * clflush is run to get data out of the CPU caches * then i915_dev_set_domain calls i915_gem_flush to * emit an MI_FLUSH and drm_agp_chipset_flush * 5. Unmapped from GTT * i915_gem_object_unbind calls set_domain (CPU, CPU) * flush_domains and invalidate_domains end up both zero * so no flushing/invalidating happens * 6. Freed * yay, done * * Case 2: The shared render buffer * * 1. Allocated * 2. Mapped to GTT * 3. Read/written by GPU * 4. set_domain to (CPU,CPU) * 5. Read/written by CPU * 6. Read/written by GPU * * 1. Allocated * Same as last example, (CPU, CPU) * 2. Mapped to GTT * Nothing changes (assertions find that it is not in the GPU) * 3. Read/written by GPU * execbuffer calls set_domain (RENDER, RENDER) * flush_domains gets CPU * invalidate_domains gets GPU * clflush (obj) * MI_FLUSH and drm_agp_chipset_flush * 4. set_domain (CPU, CPU) * flush_domains gets GPU * invalidate_domains gets CPU * wait_rendering (obj) to make sure all drawing is complete. * This will include an MI_FLUSH to get the data from GPU * to memory * clflush (obj) to invalidate the CPU cache * Another MI_FLUSH in i915_gem_flush (eliminate this somehow?) * 5. Read/written by CPU * cache lines are loaded and dirtied * 6. Read written by GPU * Same as last GPU access * * Case 3: The constant buffer * * 1. Allocated * 2. Written by CPU * 3. Read by GPU * 4. Updated (written) by CPU again * 5. Read by GPU * * 1. Allocated * (CPU, CPU) * 2. Written by CPU * (CPU, CPU) * 3. Read by GPU * (CPU+RENDER, 0) * flush_domains = CPU * invalidate_domains = RENDER * clflush (obj) * MI_FLUSH * drm_agp_chipset_flush * 4. Updated (written) by CPU again * (CPU, CPU) * flush_domains = 0 (no previous write domain) * invalidate_domains = 0 (no new read domains) * 5. Read by GPU * (CPU+RENDER, 0) * flush_domains = CPU * invalidate_domains = RENDER * clflush (obj) * MI_FLUSH * drm_agp_chipset_flush */ static void i915_gem_object_set_to_gpu_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; uint32_t invalidate_domains = 0; uint32_t flush_domains = 0; BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU); BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU); #if WATCH_BUF DRM_INFO("%s: object %p read %08x -> %08x write %08x -> %08x\n", __func__, obj, obj->read_domains, obj->pending_read_domains, obj->write_domain, obj->pending_write_domain); #endif /* * If the object isn't moving to a new write domain, * let the object stay in multiple read domains */ if (obj->pending_write_domain == 0) obj->pending_read_domains |= obj->read_domains; else obj_priv->dirty = 1; /* * Flush the current write domain if * the new read domains don't match. Invalidate * any read domains which differ from the old * write domain */ if (obj->write_domain && obj->write_domain != obj->pending_read_domains) { flush_domains |= obj->write_domain; invalidate_domains |= obj->pending_read_domains & ~obj->write_domain; } /* * Invalidate any read caches which may have * stale data. That is, any new read domains. */ invalidate_domains |= obj->pending_read_domains & ~obj->read_domains; if ((flush_domains | invalidate_domains) & I915_GEM_DOMAIN_CPU) { #if WATCH_BUF DRM_INFO("%s: CPU domain flush %08x invalidate %08x\n", __func__, flush_domains, invalidate_domains); #endif i915_gem_clflush_object(obj); } /* The actual obj->write_domain will be updated with * pending_write_domain after we emit the accumulated flush for all * of our domain changes in execbuffers (which clears objects' * write_domains). So if we have a current write domain that we * aren't changing, set pending_write_domain to that. */ if (flush_domains == 0 && obj->pending_write_domain == 0) obj->pending_write_domain = obj->write_domain; obj->read_domains = obj->pending_read_domains; dev->invalidate_domains |= invalidate_domains; dev->flush_domains |= flush_domains; #if WATCH_BUF DRM_INFO("%s: read %08x write %08x invalidate %08x flush %08x\n", __func__, obj->read_domains, obj->write_domain, dev->invalidate_domains, dev->flush_domains); #endif } /** * Moves the object from a partially CPU read to a full one. * * Note that this only resolves i915_gem_object_set_cpu_read_domain_range(), * and doesn't handle transitioning from !(read_domains & I915_GEM_DOMAIN_CPU). */ static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; if (!obj_priv->page_cpu_valid) return; /* If we're partially in the CPU read domain, finish moving it in. */ if (obj->read_domains & I915_GEM_DOMAIN_CPU) { int i; for (i = 0; i <= (obj->size - 1) / PAGE_SIZE; i++) { if (obj_priv->page_cpu_valid[i]) continue; drm_clflush_pages(obj_priv->pages + i, 1); } drm_agp_chipset_flush(dev); } /* Free the page_cpu_valid mappings which are now stale, whether * or not we've got I915_GEM_DOMAIN_CPU. */ drm_free(obj_priv->page_cpu_valid, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); obj_priv->page_cpu_valid = NULL; } /** * Set the CPU read domain on a range of the object. * * The object ends up with I915_GEM_DOMAIN_CPU in its read flags although it's * not entirely valid. The page_cpu_valid member of the object flags which * pages have been flushed, and will be respected by * i915_gem_object_set_to_cpu_domain() if it's called on to get a valid mapping * of the whole object. * * This function returns when the move is complete, including waiting on * flushes to occur. */ static int i915_gem_object_set_cpu_read_domain_range(struct drm_gem_object *obj, uint64_t offset, uint64_t size) { struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; if (offset == 0 && size == obj->size) return i915_gem_object_set_to_cpu_domain(obj, 0); i915_gem_object_flush_gpu_write_domain(obj); /* Wait on any GPU rendering and flushing to occur. */ ret = i915_gem_object_wait_rendering(obj); if (ret != 0) return ret; i915_gem_object_flush_gtt_write_domain(obj); /* If we're already fully in the CPU read domain, we're done. */ if (obj_priv->page_cpu_valid == NULL && (obj->read_domains & I915_GEM_DOMAIN_CPU) != 0) return 0; /* Otherwise, create/clear the per-page CPU read domain flag if we're * newly adding I915_GEM_DOMAIN_CPU */ if (obj_priv->page_cpu_valid == NULL) { obj_priv->page_cpu_valid = drm_calloc(1, obj->size / PAGE_SIZE, DRM_MEM_DRIVER); if (obj_priv->page_cpu_valid == NULL) return -ENOMEM; } else if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) memset(obj_priv->page_cpu_valid, 0, obj->size / PAGE_SIZE); /* Flush the cache on any pages that are still invalid from the CPU's * perspective. */ for (i = offset / PAGE_SIZE; i <= (offset + size - 1) / PAGE_SIZE; i++) { if (obj_priv->page_cpu_valid[i]) continue; drm_clflush_pages(obj_priv->pages + i, 1); obj_priv->page_cpu_valid[i] = 1; } /* It should now be out of any other write domains, and we can update * the domain values for our changes. */ BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0); obj->read_domains |= I915_GEM_DOMAIN_CPU; return 0; } /** * Pin an object to the GTT and evaluate the relocations landing in it. */ static int i915_gem_object_pin_and_relocate(struct drm_gem_object *obj, struct drm_file *file_priv, struct drm_i915_gem_exec_object *entry) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_relocation_entry reloc; struct drm_i915_gem_relocation_entry __user *relocs; struct drm_i915_gem_object *obj_priv = obj->driver_private; int i, ret; void __iomem *reloc_page; /* Choose the GTT offset for our buffer and put it there. */ ret = i915_gem_object_pin(obj, (uint32_t) entry->alignment); if (ret) return ret; entry->offset = obj_priv->gtt_offset; relocs = (struct drm_i915_gem_relocation_entry __user *) (uintptr_t) entry->relocs_ptr; /* Apply the relocations, using the GTT aperture to avoid cache * flushing requirements. */ for (i = 0; i < entry->relocation_count; i++) { struct drm_gem_object *target_obj; struct drm_i915_gem_object *target_obj_priv; uint32_t reloc_val, reloc_offset; uint32_t __iomem *reloc_entry; ret = copy_from_user(&reloc, relocs + i, sizeof(reloc)); if (ret != 0) { i915_gem_object_unpin(obj); return ret; } target_obj = drm_gem_object_lookup(obj->dev, file_priv, reloc.target_handle); if (target_obj == NULL) { i915_gem_object_unpin(obj); return -EBADF; } target_obj_priv = target_obj->driver_private; /* The target buffer should have appeared before us in the * exec_object list, so it should have a GTT space bound by now. */ if (target_obj_priv->gtt_space == NULL) { DRM_ERROR("No GTT space found for object %d\n", reloc.target_handle); drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } if (reloc.offset > obj->size - 4) { DRM_ERROR("Relocation beyond object bounds: " "obj %p target %d offset %d size %d.\n", obj, reloc.target_handle, (int) reloc.offset, (int) obj->size); drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } if (reloc.offset & 3) { DRM_ERROR("Relocation not 4-byte aligned: " "obj %p target %d offset %d.\n", obj, reloc.target_handle, (int) reloc.offset); drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } if (reloc.write_domain & I915_GEM_DOMAIN_CPU || reloc.read_domains & I915_GEM_DOMAIN_CPU) { DRM_ERROR("reloc with read/write CPU domains: " "obj %p target %d offset %d " "read %08x write %08x", obj, reloc.target_handle, (int) reloc.offset, reloc.read_domains, reloc.write_domain); drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } if (reloc.write_domain && target_obj->pending_write_domain && reloc.write_domain != target_obj->pending_write_domain) { DRM_ERROR("Write domain conflict: " "obj %p target %d offset %d " "new %08x old %08x\n", obj, reloc.target_handle, (int) reloc.offset, reloc.write_domain, target_obj->pending_write_domain); drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } #if WATCH_RELOC DRM_INFO("%s: obj %p offset %08x target %d " "read %08x write %08x gtt %08x " "presumed %08x delta %08x\n", __func__, obj, (int) reloc.offset, (int) reloc.target_handle, (int) reloc.read_domains, (int) reloc.write_domain, (int) target_obj_priv->gtt_offset, (int) reloc.presumed_offset, reloc.delta); #endif target_obj->pending_read_domains |= reloc.read_domains; target_obj->pending_write_domain |= reloc.write_domain; /* If the relocation already has the right value in it, no * more work needs to be done. */ if (target_obj_priv->gtt_offset == reloc.presumed_offset) { drm_gem_object_unreference(target_obj); continue; } ret = i915_gem_object_set_to_gtt_domain(obj, 1); if (ret != 0) { drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return -EINVAL; } /* Map the page containing the relocation we're going to * perform. */ reloc_offset = obj_priv->gtt_offset + reloc.offset; reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping, (reloc_offset & ~(PAGE_SIZE - 1))); reloc_entry = (uint32_t __iomem *)(reloc_page + (reloc_offset & (PAGE_SIZE - 1))); reloc_val = target_obj_priv->gtt_offset + reloc.delta; #if WATCH_BUF DRM_INFO("Applied relocation: %p@0x%08x %08x -> %08x\n", obj, (unsigned int) reloc.offset, readl(reloc_entry), reloc_val); #endif writel(reloc_val, reloc_entry); io_mapping_unmap_atomic(reloc_page); /* Write the updated presumed offset for this entry back out * to the user. */ reloc.presumed_offset = target_obj_priv->gtt_offset; ret = copy_to_user(relocs + i, &reloc, sizeof(reloc)); if (ret != 0) { drm_gem_object_unreference(target_obj); i915_gem_object_unpin(obj); return ret; } drm_gem_object_unreference(target_obj); } #if WATCH_BUF if (0) i915_gem_dump_object(obj, 128, __func__, ~0); #endif return 0; } /** Dispatch a batchbuffer to the ring */ static int i915_dispatch_gem_execbuffer(struct drm_device *dev, struct drm_i915_gem_execbuffer *exec, uint64_t exec_offset) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_clip_rect __user *boxes = (struct drm_clip_rect __user *) (uintptr_t) exec->cliprects_ptr; int nbox = exec->num_cliprects; int i = 0, count; uint32_t exec_start, exec_len; RING_LOCALS; exec_start = (uint32_t) exec_offset + exec->batch_start_offset; exec_len = (uint32_t) exec->batch_len; if ((exec_start | exec_len) & 0x7) { DRM_ERROR("alignment\n"); return -EINVAL; } if (!exec_start) return -EINVAL; count = nbox ? nbox : 1; for (i = 0; i < count; i++) { if (i < nbox) { int ret = i915_emit_box(dev, boxes, i, exec->DR1, exec->DR4); if (ret) return ret; } if (IS_I830(dev) || IS_845G(dev)) { BEGIN_LP_RING(4); OUT_RING(MI_BATCH_BUFFER); OUT_RING(exec_start | MI_BATCH_NON_SECURE); OUT_RING(exec_start + exec_len - 4); OUT_RING(0); ADVANCE_LP_RING(); } else { BEGIN_LP_RING(2); if (IS_I965G(dev)) { OUT_RING(MI_BATCH_BUFFER_START | (2 << 6) | MI_BATCH_NON_SECURE_I965); OUT_RING(exec_start); } else { OUT_RING(MI_BATCH_BUFFER_START | (2 << 6)); OUT_RING(exec_start | MI_BATCH_NON_SECURE); } ADVANCE_LP_RING(); } } /* XXX breadcrumb */ return 0; } /* Throttle our rendering by waiting until the ring has completed our requests * emitted over 20 msec ago. * * This should get us reasonable parallelism between CPU and GPU but also * relatively low latency when blocking on a particular request to finish. */ static int i915_gem_ring_throttle(struct drm_device *dev, struct drm_file *file_priv) { struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; int ret = 0; uint32_t seqno; mutex_lock(&dev->struct_mutex); seqno = i915_file_priv->mm.last_gem_throttle_seqno; i915_file_priv->mm.last_gem_throttle_seqno = i915_file_priv->mm.last_gem_seqno; if (seqno) ret = i915_wait_request(dev, seqno); mutex_unlock(&dev->struct_mutex); return ret; } int i915_gem_execbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_file_private *i915_file_priv = file_priv->driver_priv; struct drm_i915_gem_execbuffer *args = data; struct drm_i915_gem_exec_object *exec_list = NULL; struct drm_gem_object **object_list = NULL; struct drm_gem_object *batch_obj; struct drm_i915_gem_object *obj_priv; int ret, i, pinned = 0; uint64_t exec_offset; uint32_t seqno, flush_domains; int pin_tries; #if WATCH_EXEC DRM_INFO("buffers_ptr %d buffer_count %d len %08x\n", (int) args->buffers_ptr, args->buffer_count, args->batch_len); #endif if (args->buffer_count < 1) { DRM_ERROR("execbuf with %d buffers\n", args->buffer_count); return -EINVAL; } /* Copy in the exec list from userland */ exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count, DRM_MEM_DRIVER); object_list = drm_calloc(sizeof(*object_list), args->buffer_count, DRM_MEM_DRIVER); if (exec_list == NULL || object_list == NULL) { DRM_ERROR("Failed to allocate exec or object list " "for %d buffers\n", args->buffer_count); ret = -ENOMEM; goto pre_mutex_err; } ret = copy_from_user(exec_list, (struct drm_i915_relocation_entry __user *) (uintptr_t) args->buffers_ptr, sizeof(*exec_list) * args->buffer_count); if (ret != 0) { DRM_ERROR("copy %d exec entries failed %d\n", args->buffer_count, ret); goto pre_mutex_err; } mutex_lock(&dev->struct_mutex); i915_verify_inactive(dev, __FILE__, __LINE__); if (dev_priv->mm.wedged) { DRM_ERROR("Execbuf while wedged\n"); mutex_unlock(&dev->struct_mutex); ret = -EIO; goto pre_mutex_err; } if (dev_priv->mm.suspended) { DRM_ERROR("Execbuf while VT-switched.\n"); mutex_unlock(&dev->struct_mutex); ret = -EBUSY; goto pre_mutex_err; } /* Look up object handles */ for (i = 0; i < args->buffer_count; i++) { object_list[i] = drm_gem_object_lookup(dev, file_priv, exec_list[i].handle); if (object_list[i] == NULL) { DRM_ERROR("Invalid object handle %d at index %d\n", exec_list[i].handle, i); ret = -EBADF; goto err; } obj_priv = object_list[i]->driver_private; if (obj_priv->in_execbuffer) { DRM_ERROR("Object %p appears more than once in object list\n", object_list[i]); ret = -EBADF; goto err; } obj_priv->in_execbuffer = true; } /* Pin and relocate */ for (pin_tries = 0; ; pin_tries++) { ret = 0; for (i = 0; i < args->buffer_count; i++) { object_list[i]->pending_read_domains = 0; object_list[i]->pending_write_domain = 0; ret = i915_gem_object_pin_and_relocate(object_list[i], file_priv, &exec_list[i]); if (ret) break; pinned = i + 1; } /* success */ if (ret == 0) break; /* error other than GTT full, or we've already tried again */ if (ret != -ENOMEM || pin_tries >= 1) { if (ret != -ERESTARTSYS) DRM_ERROR("Failed to pin buffers %d\n", ret); goto err; } /* unpin all of our buffers */ for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); pinned = 0; /* evict everyone we can from the aperture */ ret = i915_gem_evict_everything(dev); if (ret) goto err; } /* Set the pending read domains for the batch buffer to COMMAND */ batch_obj = object_list[args->buffer_count-1]; batch_obj->pending_read_domains = I915_GEM_DOMAIN_COMMAND; batch_obj->pending_write_domain = 0; i915_verify_inactive(dev, __FILE__, __LINE__); /* Zero the global flush/invalidate flags. These * will be modified as new domains are computed * for each object */ dev->invalidate_domains = 0; dev->flush_domains = 0; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; /* Compute new gpu domains and update invalidate/flush */ i915_gem_object_set_to_gpu_domain(obj); } i915_verify_inactive(dev, __FILE__, __LINE__); if (dev->invalidate_domains | dev->flush_domains) { #if WATCH_EXEC DRM_INFO("%s: invalidate_domains %08x flush_domains %08x\n", __func__, dev->invalidate_domains, dev->flush_domains); #endif i915_gem_flush(dev, dev->invalidate_domains, dev->flush_domains); if (dev->flush_domains) (void)i915_add_request(dev, dev->flush_domains); } for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; obj->write_domain = obj->pending_write_domain; } i915_verify_inactive(dev, __FILE__, __LINE__); #if WATCH_COHERENCY for (i = 0; i < args->buffer_count; i++) { i915_gem_object_check_coherency(object_list[i], exec_list[i].handle); } #endif exec_offset = exec_list[args->buffer_count - 1].offset; #if WATCH_EXEC i915_gem_dump_object(object_list[args->buffer_count - 1], args->batch_len, __func__, ~0); #endif /* Exec the batchbuffer */ ret = i915_dispatch_gem_execbuffer(dev, args, exec_offset); if (ret) { DRM_ERROR("dispatch failed %d\n", ret); goto err; } /* * Ensure that the commands in the batch buffer are * finished before the interrupt fires */ flush_domains = i915_retire_commands(dev); i915_verify_inactive(dev, __FILE__, __LINE__); /* * Get a seqno representing the execution of the current buffer, * which we can wait on. We would like to mitigate these interrupts, * likely by only creating seqnos occasionally (so that we have * *some* interrupts representing completion of buffers that we can * wait on when trying to clear up gtt space). */ seqno = i915_add_request(dev, flush_domains); BUG_ON(seqno == 0); i915_file_priv->mm.last_gem_seqno = seqno; for (i = 0; i < args->buffer_count; i++) { struct drm_gem_object *obj = object_list[i]; i915_gem_object_move_to_active(obj, seqno); #if WATCH_LRU DRM_INFO("%s: move to exec list %p\n", __func__, obj); #endif } #if WATCH_LRU i915_dump_lru(dev, __func__); #endif i915_verify_inactive(dev, __FILE__, __LINE__); err: for (i = 0; i < pinned; i++) i915_gem_object_unpin(object_list[i]); for (i = 0; i < args->buffer_count; i++) { if (object_list[i]) { obj_priv = object_list[i]->driver_private; obj_priv->in_execbuffer = false; } drm_gem_object_unreference(object_list[i]); } mutex_unlock(&dev->struct_mutex); if (!ret) { /* Copy the new buffer offsets back to the user's exec list. */ ret = copy_to_user((struct drm_i915_relocation_entry __user *) (uintptr_t) args->buffers_ptr, exec_list, sizeof(*exec_list) * args->buffer_count); if (ret) DRM_ERROR("failed to copy %d exec entries " "back to user (%d)\n", args->buffer_count, ret); } pre_mutex_err: drm_free(object_list, sizeof(*object_list) * args->buffer_count, DRM_MEM_DRIVER); drm_free(exec_list, sizeof(*exec_list) * args->buffer_count, DRM_MEM_DRIVER); return ret; } int i915_gem_object_pin(struct drm_gem_object *obj, uint32_t alignment) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; int ret; i915_verify_inactive(dev, __FILE__, __LINE__); if (obj_priv->gtt_space == NULL) { ret = i915_gem_object_bind_to_gtt(obj, alignment); if (ret != 0) { if (ret != -EBUSY && ret != -ERESTARTSYS) DRM_ERROR("Failure to bind: %d\n", ret); return ret; } } /* * Pre-965 chips need a fence register set up in order to * properly handle tiled surfaces. */ if (!IS_I965G(dev) && obj_priv->fence_reg == I915_FENCE_REG_NONE && obj_priv->tiling_mode != I915_TILING_NONE) { ret = i915_gem_object_get_fence_reg(obj, true); if (ret != 0) { if (ret != -EBUSY && ret != -ERESTARTSYS) DRM_ERROR("Failure to install fence: %d\n", ret); return ret; } } obj_priv->pin_count++; /* If the object is not active and not pending a flush, * remove it from the inactive list */ if (obj_priv->pin_count == 1) { atomic_inc(&dev->pin_count); atomic_add(obj->size, &dev->pin_memory); if (!obj_priv->active && (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) == 0 && !list_empty(&obj_priv->list)) list_del_init(&obj_priv->list); } i915_verify_inactive(dev, __FILE__, __LINE__); return 0; } void i915_gem_object_unpin(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv = obj->driver_private; i915_verify_inactive(dev, __FILE__, __LINE__); obj_priv->pin_count--; BUG_ON(obj_priv->pin_count < 0); BUG_ON(obj_priv->gtt_space == NULL); /* If the object is no longer pinned, and is * neither active nor being flushed, then stick it on * the inactive list */ if (obj_priv->pin_count == 0) { if (!obj_priv->active && (obj->write_domain & ~(I915_GEM_DOMAIN_CPU | I915_GEM_DOMAIN_GTT)) == 0) list_move_tail(&obj_priv->list, &dev_priv->mm.inactive_list); atomic_dec(&dev->pin_count); atomic_sub(obj->size, &dev->pin_memory); } i915_verify_inactive(dev, __FILE__, __LINE__); } int i915_gem_pin_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_pin *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; mutex_lock(&dev->struct_mutex); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) { DRM_ERROR("Bad handle in i915_gem_pin_ioctl(): %d\n", args->handle); mutex_unlock(&dev->struct_mutex); return -EBADF; } obj_priv = obj->driver_private; if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) { DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n", args->handle); drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } obj_priv->user_pin_count++; obj_priv->pin_filp = file_priv; if (obj_priv->user_pin_count == 1) { ret = i915_gem_object_pin(obj, args->alignment); if (ret != 0) { drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return ret; } } /* XXX - flush the CPU caches for pinned objects * as the X server doesn't manage domains yet */ i915_gem_object_flush_cpu_write_domain(obj); args->offset = obj_priv->gtt_offset; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return 0; } int i915_gem_unpin_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_pin *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; mutex_lock(&dev->struct_mutex); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) { DRM_ERROR("Bad handle in i915_gem_unpin_ioctl(): %d\n", args->handle); mutex_unlock(&dev->struct_mutex); return -EBADF; } obj_priv = obj->driver_private; if (obj_priv->pin_filp != file_priv) { DRM_ERROR("Not pinned by caller in i915_gem_pin_ioctl(): %d\n", args->handle); drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return -EINVAL; } obj_priv->user_pin_count--; if (obj_priv->user_pin_count == 0) { obj_priv->pin_filp = NULL; i915_gem_object_unpin(obj); } drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return 0; } int i915_gem_busy_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_i915_gem_busy *args = data; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; mutex_lock(&dev->struct_mutex); obj = drm_gem_object_lookup(dev, file_priv, args->handle); if (obj == NULL) { DRM_ERROR("Bad handle in i915_gem_busy_ioctl(): %d\n", args->handle); mutex_unlock(&dev->struct_mutex); return -EBADF; } /* Update the active list for the hardware's current position. * Otherwise this only updates on a delayed timer or when irqs are * actually unmasked, and our working set ends up being larger than * required. */ i915_gem_retire_requests(dev); obj_priv = obj->driver_private; /* Don't count being on the flushing list against the object being * done. Otherwise, a buffer left on the flushing list but not getting * flushed (because nobody's flushing that domain) won't ever return * unbusy and get reused by libdrm's bo cache. The other expected * consumer of this interface, OpenGL's occlusion queries, also specs * that the objects get unbusy "eventually" without any interference. */ args->busy = obj_priv->active && obj_priv->last_rendering_seqno != 0; drm_gem_object_unreference(obj); mutex_unlock(&dev->struct_mutex); return 0; } int i915_gem_throttle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { return i915_gem_ring_throttle(dev, file_priv); } int i915_gem_init_object(struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv; obj_priv = drm_calloc(1, sizeof(*obj_priv), DRM_MEM_DRIVER); if (obj_priv == NULL) return -ENOMEM; /* * We've just allocated pages from the kernel, * so they've just been written by the CPU with * zeros. They'll need to be clflushed before we * use them with the GPU. */ obj->write_domain = I915_GEM_DOMAIN_CPU; obj->read_domains = I915_GEM_DOMAIN_CPU; obj_priv->agp_type = AGP_USER_MEMORY; obj->driver_private = obj_priv; obj_priv->obj = obj; obj_priv->fence_reg = I915_FENCE_REG_NONE; INIT_LIST_HEAD(&obj_priv->list); return 0; } void i915_gem_free_object(struct drm_gem_object *obj) { struct drm_device *dev = obj->dev; struct drm_i915_gem_object *obj_priv = obj->driver_private; while (obj_priv->pin_count > 0) i915_gem_object_unpin(obj); if (obj_priv->phys_obj) i915_gem_detach_phys_object(dev, obj); i915_gem_object_unbind(obj); i915_gem_free_mmap_offset(obj); drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER); drm_free(obj->driver_private, 1, DRM_MEM_DRIVER); } /** Unbinds all objects that are on the given buffer list. */ static int i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head) { struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; while (!list_empty(head)) { obj_priv = list_first_entry(head, struct drm_i915_gem_object, list); obj = obj_priv->obj; if (obj_priv->pin_count != 0) { DRM_ERROR("Pinned object in unbind list\n"); mutex_unlock(&dev->struct_mutex); return -EINVAL; } ret = i915_gem_object_unbind(obj); if (ret != 0) { DRM_ERROR("Error unbinding object in LeaveVT: %d\n", ret); mutex_unlock(&dev->struct_mutex); return ret; } } return 0; } int i915_gem_idle(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; uint32_t seqno, cur_seqno, last_seqno; int stuck, ret; mutex_lock(&dev->struct_mutex); if (dev_priv->mm.suspended || dev_priv->ring.ring_obj == NULL) { mutex_unlock(&dev->struct_mutex); return 0; } /* Hack! Don't let anybody do execbuf while we don't control the chip. * We need to replace this with a semaphore, or something. */ dev_priv->mm.suspended = 1; /* Cancel the retire work handler, wait for it to finish if running */ mutex_unlock(&dev->struct_mutex); cancel_delayed_work_sync(&dev_priv->mm.retire_work); mutex_lock(&dev->struct_mutex); i915_kernel_lost_context(dev); /* Flush the GPU along with all non-CPU write domains */ i915_gem_flush(dev, ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT), ~(I915_GEM_DOMAIN_CPU|I915_GEM_DOMAIN_GTT)); seqno = i915_add_request(dev, ~I915_GEM_DOMAIN_CPU); if (seqno == 0) { mutex_unlock(&dev->struct_mutex); return -ENOMEM; } dev_priv->mm.waiting_gem_seqno = seqno; last_seqno = 0; stuck = 0; for (;;) { cur_seqno = i915_get_gem_seqno(dev); if (i915_seqno_passed(cur_seqno, seqno)) break; if (last_seqno == cur_seqno) { if (stuck++ > 100) { DRM_ERROR("hardware wedged\n"); dev_priv->mm.wedged = 1; DRM_WAKEUP(&dev_priv->irq_queue); break; } } msleep(10); last_seqno = cur_seqno; } dev_priv->mm.waiting_gem_seqno = 0; i915_gem_retire_requests(dev); if (!dev_priv->mm.wedged) { /* Active and flushing should now be empty as we've * waited for a sequence higher than any pending execbuffer */ WARN_ON(!list_empty(&dev_priv->mm.active_list)); WARN_ON(!list_empty(&dev_priv->mm.flushing_list)); /* Request should now be empty as we've also waited * for the last request in the list */ WARN_ON(!list_empty(&dev_priv->mm.request_list)); } /* Empty the active and flushing lists to inactive. If there's * anything left at this point, it means that we're wedged and * nothing good's going to happen by leaving them there. So strip * the GPU domains and just stuff them onto inactive. */ while (!list_empty(&dev_priv->mm.active_list)) { struct drm_i915_gem_object *obj_priv; obj_priv = list_first_entry(&dev_priv->mm.active_list, struct drm_i915_gem_object, list); obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; i915_gem_object_move_to_inactive(obj_priv->obj); } while (!list_empty(&dev_priv->mm.flushing_list)) { struct drm_i915_gem_object *obj_priv; obj_priv = list_first_entry(&dev_priv->mm.flushing_list, struct drm_i915_gem_object, list); obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS; i915_gem_object_move_to_inactive(obj_priv->obj); } /* Move all inactive buffers out of the GTT. */ ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list); WARN_ON(!list_empty(&dev_priv->mm.inactive_list)); if (ret) { mutex_unlock(&dev->struct_mutex); return ret; } i915_gem_cleanup_ringbuffer(dev); mutex_unlock(&dev->struct_mutex); return 0; } static int i915_gem_init_hws(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; int ret; /* If we need a physical address for the status page, it's already * initialized at driver load time. */ if (!I915_NEED_GFX_HWS(dev)) return 0; obj = drm_gem_object_alloc(dev, 4096); if (obj == NULL) { DRM_ERROR("Failed to allocate status page\n"); return -ENOMEM; } obj_priv = obj->driver_private; obj_priv->agp_type = AGP_USER_CACHED_MEMORY; ret = i915_gem_object_pin(obj, 4096); if (ret != 0) { drm_gem_object_unreference(obj); return ret; } dev_priv->status_gfx_addr = obj_priv->gtt_offset; dev_priv->hw_status_page = kmap(obj_priv->pages[0]); if (dev_priv->hw_status_page == NULL) { DRM_ERROR("Failed to map status page.\n"); memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); return -EINVAL; } dev_priv->hws_obj = obj; memset(dev_priv->hw_status_page, 0, PAGE_SIZE); I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr); I915_READ(HWS_PGA); /* posting read */ DRM_DEBUG("hws offset: 0x%08x\n", dev_priv->status_gfx_addr); return 0; } static void i915_gem_cleanup_hws(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; if (dev_priv->hws_obj == NULL) return; obj = dev_priv->hws_obj; obj_priv = obj->driver_private; kunmap(obj_priv->pages[0]); i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); dev_priv->hws_obj = NULL; memset(&dev_priv->hws_map, 0, sizeof(dev_priv->hws_map)); dev_priv->hw_status_page = NULL; /* Write high address into HWS_PGA when disabling. */ I915_WRITE(HWS_PGA, 0x1ffff000); } int i915_gem_init_ringbuffer(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_gem_object *obj; struct drm_i915_gem_object *obj_priv; drm_i915_ring_buffer_t *ring = &dev_priv->ring; int ret; u32 head; ret = i915_gem_init_hws(dev); if (ret != 0) return ret; obj = drm_gem_object_alloc(dev, 128 * 1024); if (obj == NULL) { DRM_ERROR("Failed to allocate ringbuffer\n"); i915_gem_cleanup_hws(dev); return -ENOMEM; } obj_priv = obj->driver_private; ret = i915_gem_object_pin(obj, 4096); if (ret != 0) { drm_gem_object_unreference(obj); i915_gem_cleanup_hws(dev); return ret; } /* Set up the kernel mapping for the ring. */ ring->Size = obj->size; ring->tail_mask = obj->size - 1; ring->map.offset = dev->agp->base + obj_priv->gtt_offset; ring->map.size = obj->size; ring->map.type = 0; ring->map.flags = 0; ring->map.mtrr = 0; drm_core_ioremap_wc(&ring->map, dev); if (ring->map.handle == NULL) { DRM_ERROR("Failed to map ringbuffer.\n"); memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); i915_gem_object_unpin(obj); drm_gem_object_unreference(obj); i915_gem_cleanup_hws(dev); return -EINVAL; } ring->ring_obj = obj; ring->virtual_start = ring->map.handle; /* Stop the ring if it's running. */ I915_WRITE(PRB0_CTL, 0); I915_WRITE(PRB0_TAIL, 0); I915_WRITE(PRB0_HEAD, 0); /* Initialize the ring. */ I915_WRITE(PRB0_START, obj_priv->gtt_offset); head = I915_READ(PRB0_HEAD) & HEAD_ADDR; /* G45 ring initialization fails to reset head to zero */ if (head != 0) { DRM_ERROR("Ring head not reset to zero " "ctl %08x head %08x tail %08x start %08x\n", I915_READ(PRB0_CTL), I915_READ(PRB0_HEAD), I915_READ(PRB0_TAIL), I915_READ(PRB0_START)); I915_WRITE(PRB0_HEAD, 0); DRM_ERROR("Ring head forced to zero " "ctl %08x head %08x tail %08x start %08x\n", I915_READ(PRB0_CTL), I915_READ(PRB0_HEAD), I915_READ(PRB0_TAIL), I915_READ(PRB0_START)); } I915_WRITE(PRB0_CTL, ((obj->size - 4096) & RING_NR_PAGES) | RING_NO_REPORT | RING_VALID); head = I915_READ(PRB0_HEAD) & HEAD_ADDR; /* If the head is still not zero, the ring is dead */ if (head != 0) { DRM_ERROR("Ring initialization failed " "ctl %08x head %08x tail %08x start %08x\n", I915_READ(PRB0_CTL), I915_READ(PRB0_HEAD), I915_READ(PRB0_TAIL), I915_READ(PRB0_START)); return -EIO; } /* Update our cache of the ring state */ if (!drm_core_check_feature(dev, DRIVER_MODESET)) i915_kernel_lost_context(dev); else { ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR; ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR; ring->space = ring->head - (ring->tail + 8); if (ring->space < 0) ring->space += ring->Size; } return 0; } void i915_gem_cleanup_ringbuffer(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; if (dev_priv->ring.ring_obj == NULL) return; drm_core_ioremapfree(&dev_priv->ring.map, dev); i915_gem_object_unpin(dev_priv->ring.ring_obj); drm_gem_object_unreference(dev_priv->ring.ring_obj); dev_priv->ring.ring_obj = NULL; memset(&dev_priv->ring, 0, sizeof(dev_priv->ring)); i915_gem_cleanup_hws(dev); } int i915_gem_entervt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { drm_i915_private_t *dev_priv = dev->dev_private; int ret; if (drm_core_check_feature(dev, DRIVER_MODESET)) return 0; if (dev_priv->mm.wedged) { DRM_ERROR("Reenabling wedged hardware, good luck\n"); dev_priv->mm.wedged = 0; } mutex_lock(&dev->struct_mutex); dev_priv->mm.suspended = 0; ret = i915_gem_init_ringbuffer(dev); if (ret != 0) return ret; BUG_ON(!list_empty(&dev_priv->mm.active_list)); BUG_ON(!list_empty(&dev_priv->mm.flushing_list)); BUG_ON(!list_empty(&dev_priv->mm.inactive_list)); BUG_ON(!list_empty(&dev_priv->mm.request_list)); mutex_unlock(&dev->struct_mutex); drm_irq_install(dev); return 0; } int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { int ret; if (drm_core_check_feature(dev, DRIVER_MODESET)) return 0; ret = i915_gem_idle(dev); drm_irq_uninstall(dev); return ret; } void i915_gem_lastclose(struct drm_device *dev) { int ret; if (drm_core_check_feature(dev, DRIVER_MODESET)) return; ret = i915_gem_idle(dev); if (ret) DRM_ERROR("failed to idle hardware: %d\n", ret); } void i915_gem_load(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; INIT_LIST_HEAD(&dev_priv->mm.active_list); INIT_LIST_HEAD(&dev_priv->mm.flushing_list); INIT_LIST_HEAD(&dev_priv->mm.inactive_list); INIT_LIST_HEAD(&dev_priv->mm.request_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); dev_priv->mm.next_gem_seqno = 1; /* Old X drivers will take 0-2 for front, back, depth buffers */ dev_priv->fence_reg_start = 3; if (IS_I965G(dev) || IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) dev_priv->num_fence_regs = 16; else dev_priv->num_fence_regs = 8; i915_gem_detect_bit_6_swizzle(dev); } /* * Create a physically contiguous memory object for this object * e.g. for cursor + overlay regs */ int i915_gem_init_phys_object(struct drm_device *dev, int id, int size) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_phys_object *phys_obj; int ret; if (dev_priv->mm.phys_objs[id - 1] || !size) return 0; phys_obj = drm_calloc(1, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER); if (!phys_obj) return -ENOMEM; phys_obj->id = id; phys_obj->handle = drm_pci_alloc(dev, size, 0, 0xffffffff); if (!phys_obj->handle) { ret = -ENOMEM; goto kfree_obj; } #ifdef CONFIG_X86 set_memory_wc((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE); #endif dev_priv->mm.phys_objs[id - 1] = phys_obj; return 0; kfree_obj: drm_free(phys_obj, sizeof(struct drm_i915_gem_phys_object), DRM_MEM_DRIVER); return ret; } void i915_gem_free_phys_object(struct drm_device *dev, int id) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_phys_object *phys_obj; if (!dev_priv->mm.phys_objs[id - 1]) return; phys_obj = dev_priv->mm.phys_objs[id - 1]; if (phys_obj->cur_obj) { i915_gem_detach_phys_object(dev, phys_obj->cur_obj); } #ifdef CONFIG_X86 set_memory_wb((unsigned long)phys_obj->handle->vaddr, phys_obj->handle->size / PAGE_SIZE); #endif drm_pci_free(dev, phys_obj->handle); kfree(phys_obj); dev_priv->mm.phys_objs[id - 1] = NULL; } void i915_gem_free_all_phys_object(struct drm_device *dev) { int i; for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++) i915_gem_free_phys_object(dev, i); } void i915_gem_detach_phys_object(struct drm_device *dev, struct drm_gem_object *obj) { struct drm_i915_gem_object *obj_priv; int i; int ret; int page_count; obj_priv = obj->driver_private; if (!obj_priv->phys_obj) return; ret = i915_gem_object_get_pages(obj); if (ret) goto out; page_count = obj->size / PAGE_SIZE; for (i = 0; i < page_count; i++) { char *dst = kmap_atomic(obj_priv->pages[i], KM_USER0); char *src = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE); memcpy(dst, src, PAGE_SIZE); kunmap_atomic(dst, KM_USER0); } drm_clflush_pages(obj_priv->pages, page_count); drm_agp_chipset_flush(dev); out: obj_priv->phys_obj->cur_obj = NULL; obj_priv->phys_obj = NULL; } int i915_gem_attach_phys_object(struct drm_device *dev, struct drm_gem_object *obj, int id) { drm_i915_private_t *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj_priv; int ret = 0; int page_count; int i; if (id > I915_MAX_PHYS_OBJECT) return -EINVAL; obj_priv = obj->driver_private; if (obj_priv->phys_obj) { if (obj_priv->phys_obj->id == id) return 0; i915_gem_detach_phys_object(dev, obj); } /* create a new object */ if (!dev_priv->mm.phys_objs[id - 1]) { ret = i915_gem_init_phys_object(dev, id, obj->size); if (ret) { DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size); goto out; } } /* bind to the object */ obj_priv->phys_obj = dev_priv->mm.phys_objs[id - 1]; obj_priv->phys_obj->cur_obj = obj; ret = i915_gem_object_get_pages(obj); if (ret) { DRM_ERROR("failed to get page list\n"); goto out; } page_count = obj->size / PAGE_SIZE; for (i = 0; i < page_count; i++) { char *src = kmap_atomic(obj_priv->pages[i], KM_USER0); char *dst = obj_priv->phys_obj->handle->vaddr + (i * PAGE_SIZE); memcpy(dst, src, PAGE_SIZE); kunmap_atomic(src, KM_USER0); } return 0; out: return ret; } static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj, struct drm_i915_gem_pwrite *args, struct drm_file *file_priv) { struct drm_i915_gem_object *obj_priv = obj->driver_private; void *obj_addr; int ret; char __user *user_data; user_data = (char __user *) (uintptr_t) args->data_ptr; obj_addr = obj_priv->phys_obj->handle->vaddr + args->offset; DRM_DEBUG("obj_addr %p, %lld\n", obj_addr, args->size); ret = copy_from_user(obj_addr, user_data, args->size); if (ret) return -EFAULT; drm_agp_chipset_flush(dev); return 0; }