/* * Kernel execution entry point code. * * Copyright (c) 1995-1996 Gary Thomas * Initial PowerPC version. * Copyright (c) 1996 Cort Dougan * Rewritten for PReP * Copyright (c) 1996 Paul Mackerras * Low-level exception handers, MMU support, and rewrite. * Copyright (c) 1997 Dan Malek * PowerPC 8xx modifications. * Copyright (c) 1998-1999 TiVo, Inc. * PowerPC 403GCX modifications. * Copyright (c) 1999 Grant Erickson * PowerPC 403GCX/405GP modifications. * Copyright 2000 MontaVista Software Inc. * PPC405 modifications * PowerPC 403GCX/405GP modifications. * Author: MontaVista Software, Inc. * frank_rowand@mvista.com or source@mvista.com * debbie_chu@mvista.com * Copyright 2002-2005 MontaVista Software, Inc. * PowerPC 44x support, Matt Porter * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include "head_booke.h" /* As with the other PowerPC ports, it is expected that when code * execution begins here, the following registers contain valid, yet * optional, information: * * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) * r4 - Starting address of the init RAM disk * r5 - Ending address of the init RAM disk * r6 - Start of kernel command line string (e.g. "mem=128") * r7 - End of kernel command line string * */ __HEAD _ENTRY(_stext); _ENTRY(_start); /* * Reserve a word at a fixed location to store the address * of abatron_pteptrs */ nop /* * Save parameters we are passed */ mr r31,r3 mr r30,r4 mr r29,r5 mr r28,r6 mr r27,r7 li r24,0 /* CPU number */ bl init_cpu_state /* * This is where the main kernel code starts. */ /* ptr to current */ lis r2,init_task@h ori r2,r2,init_task@l /* ptr to current thread */ addi r4,r2,THREAD /* init task's THREAD */ mtspr SPRN_SPRG_THREAD,r4 /* stack */ lis r1,init_thread_union@h ori r1,r1,init_thread_union@l li r0,0 stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) bl early_init /* * Decide what sort of machine this is and initialize the MMU. */ mr r3,r31 mr r4,r30 mr r5,r29 mr r6,r28 mr r7,r27 bl machine_init bl MMU_init /* Setup PTE pointers for the Abatron bdiGDB */ lis r6, swapper_pg_dir@h ori r6, r6, swapper_pg_dir@l lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l lis r4, KERNELBASE@h ori r4, r4, KERNELBASE@l stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */ stw r6, 0(r5) /* Let's move on */ lis r4,start_kernel@h ori r4,r4,start_kernel@l lis r3,MSR_KERNEL@h ori r3,r3,MSR_KERNEL@l mtspr SPRN_SRR0,r4 mtspr SPRN_SRR1,r3 rfi /* change context and jump to start_kernel */ /* * Interrupt vector entry code * * The Book E MMUs are always on so we don't need to handle * interrupts in real mode as with previous PPC processors. In * this case we handle interrupts in the kernel virtual address * space. * * Interrupt vectors are dynamically placed relative to the * interrupt prefix as determined by the address of interrupt_base. * The interrupt vectors offsets are programmed using the labels * for each interrupt vector entry. * * Interrupt vectors must be aligned on a 16 byte boundary. * We align on a 32 byte cache line boundary for good measure. */ interrupt_base: /* Critical Input Interrupt */ CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception) /* Machine Check Interrupt */ CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception) /* Data Storage Interrupt */ DATA_STORAGE_EXCEPTION /* Instruction Storage Interrupt */ INSTRUCTION_STORAGE_EXCEPTION /* External Input Interrupt */ EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE) /* Alignment Interrupt */ ALIGNMENT_EXCEPTION /* Program Interrupt */ PROGRAM_EXCEPTION /* Floating Point Unavailable Interrupt */ #ifdef CONFIG_PPC_FPU FP_UNAVAILABLE_EXCEPTION #else EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE) #endif /* System Call Interrupt */ START_EXCEPTION(SystemCall) NORMAL_EXCEPTION_PROLOG EXC_XFER_EE_LITE(0x0c00, DoSyscall) /* Auxillary Processor Unavailable Interrupt */ EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) /* Decrementer Interrupt */ DECREMENTER_EXCEPTION /* Fixed Internal Timer Interrupt */ /* TODO: Add FIT support */ EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE) /* Watchdog Timer Interrupt */ /* TODO: Add watchdog support */ #ifdef CONFIG_BOOKE_WDT CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException) #else CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception) #endif /* Data TLB Error Interrupt */ START_EXCEPTION(DataTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the * kernel page tables. */ lis r11, PAGE_OFFSET@h cmplw r10, r11 blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l mfspr r12,SPRN_MMUCR rlwinm r12,r12,0,0,23 /* Clear TID */ b 4f /* Get the PGD for the current thread */ 3: mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ mfspr r12,SPRN_MMUCR mfspr r13,SPRN_PID /* Get PID */ rlwimi r12,r13,0,24,31 /* Set TID */ 4: mtspr SPRN_MMUCR,r12 /* Mask of required permission bits. Note that while we * do copy ESR:ST to _PAGE_RW position as trying to write * to an RO page is pretty common, we don't do it with * _PAGE_DIRTY. We could do it, but it's a fairly rare * event so I'd rather take the overhead when it happens * rather than adding an instruction here. We should measure * whether the whole thing is worth it in the first place * as we could avoid loading SPRN_ESR completely in the first * place... * * TODO: Is it worth doing that mfspr & rlwimi in the first * place or can we save a couple of instructions here ? */ mfspr r12,SPRN_ESR li r13,_PAGE_PRESENT|_PAGE_ACCESSED rlwimi r13,r12,10,30,30 /* Load the PTE */ /* Compute pgdir/pmd offset */ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 lwzx r11, r12, r11 /* Get pgd/pmd entry */ rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */ beq 2f /* Bail if no table */ /* Compute pte address */ rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28 lwz r11, 0(r12) /* Get high word of pte entry */ lwz r12, 4(r12) /* Get low word of pte entry */ lis r10,tlb_44x_index@ha andc. r13,r13,r12 /* Check permission */ /* Load the next available TLB index */ lwz r13,tlb_44x_index@l(r10) bne 2f /* Bail if permission mismach */ /* Increment, rollover, and store TLB index */ addi r13,r13,1 /* Compare with watermark (instruction gets patched) */ .globl tlb_44x_patch_hwater_D tlb_44x_patch_hwater_D: cmpwi 0,r13,1 /* reserve entries */ ble 5f li r13,0 5: /* Store the next available TLB index */ stw r13,tlb_44x_index@l(r10) /* Re-load the faulting address */ mfspr r10,SPRN_DEAR /* Jump to common tlb load */ b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13, SPRN_SPRG_RSCRATCH3 mfspr r12, SPRN_SPRG_RSCRATCH2 mfspr r11, SPRN_SPRG_RSCRATCH1 mfspr r10, SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ /* * Nearly the same as above, except we get our * information from different registers and bailout * to a different point. */ START_EXCEPTION(InstructionTLBError44x) mtspr SPRN_SPRG_WSCRATCH0, r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1, r11 mtspr SPRN_SPRG_WSCRATCH2, r12 mtspr SPRN_SPRG_WSCRATCH3, r13 mfcr r11 mtspr SPRN_SPRG_WSCRATCH4, r11 mfspr r10, SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the * kernel page tables. */ lis r11, PAGE_OFFSET@h cmplw r10, r11 blt+ 3f lis r11, swapper_pg_dir@h ori r11, r11, swapper_pg_dir@l mfspr r12,SPRN_MMUCR rlwinm r12,r12,0,0,23 /* Clear TID */ b 4f /* Get the PGD for the current thread */ 3: mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) /* Load PID into MMUCR TID */ mfspr r12,SPRN_MMUCR mfspr r13,SPRN_PID /* Get PID */ rlwimi r12,r13,0,24,31 /* Set TID */ 4: mtspr SPRN_MMUCR,r12 /* Make up the required permissions */ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC /* Compute pgdir/pmd offset */ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29 lwzx r11, r12, r11 /* Get pgd/pmd entry */ rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */ beq 2f /* Bail if no table */ /* Compute pte address */ rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28 lwz r11, 0(r12) /* Get high word of pte entry */ lwz r12, 4(r12) /* Get low word of pte entry */ lis r10,tlb_44x_index@ha andc. r13,r13,r12 /* Check permission */ /* Load the next available TLB index */ lwz r13,tlb_44x_index@l(r10) bne 2f /* Bail if permission mismach */ /* Increment, rollover, and store TLB index */ addi r13,r13,1 /* Compare with watermark (instruction gets patched) */ .globl tlb_44x_patch_hwater_I tlb_44x_patch_hwater_I: cmpwi 0,r13,1 /* reserve entries */ ble 5f li r13,0 5: /* Store the next available TLB index */ stw r13,tlb_44x_index@l(r10) /* Re-load the faulting address */ mfspr r10,SPRN_SRR0 /* Jump to common TLB load point */ b finish_tlb_load_44x 2: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13, SPRN_SPRG_RSCRATCH3 mfspr r12, SPRN_SPRG_RSCRATCH2 mfspr r11, SPRN_SPRG_RSCRATCH1 mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage /* * Both the instruction and data TLB miss get to this * point to load the TLB. * r10 - EA of fault * r11 - PTE high word value * r12 - PTE low word value * r13 - TLB index * MMUCR - loaded with proper value when we get here * Upon exit, we reload everything and RFI. */ finish_tlb_load_44x: /* Combine RPN & ERPN an write WS 0 */ rlwimi r11,r12,0,0,31-PAGE_SHIFT tlbwe r11,r13,PPC44x_TLB_XLAT /* * Create WS1. This is the faulting address (EPN), * page size, and valid flag. */ li r11,PPC44x_TLB_VALID | PPC44x_TLBE_SIZE /* Insert valid and page size */ rlwimi r10,r11,0,PPC44x_PTE_ADD_MASK_BIT,31 tlbwe r10,r13,PPC44x_TLB_PAGEID /* Write PAGEID */ /* And WS 2 */ li r10,0xf85 /* Mask to apply from PTE */ rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ and r11,r12,r10 /* Mask PTE bits to keep */ andi. r10,r12,_PAGE_USER /* User page ? */ beq 1f /* nope, leave U bits empty */ rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ 1: tlbwe r11,r13,PPC44x_TLB_ATTRIB /* Write ATTRIB */ /* Done...restore registers and get out of here. */ mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13, SPRN_SPRG_RSCRATCH3 mfspr r12, SPRN_SPRG_RSCRATCH2 mfspr r11, SPRN_SPRG_RSCRATCH1 mfspr r10, SPRN_SPRG_RSCRATCH0 rfi /* Force context change */ /* TLB error interrupts for 476 */ #ifdef CONFIG_PPC_47x START_EXCEPTION(DataTLBError47x) mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1,r11 mtspr SPRN_SPRG_WSCRATCH2,r12 mtspr SPRN_SPRG_WSCRATCH3,r13 mfcr r11 mtspr SPRN_SPRG_WSCRATCH4,r11 mfspr r10,SPRN_DEAR /* Get faulting address */ /* If we are faulting a kernel address, we have to use the * kernel page tables. */ lis r11,PAGE_OFFSET@h cmplw cr0,r10,r11 blt+ 3f lis r11,swapper_pg_dir@h ori r11,r11, swapper_pg_dir@l li r12,0 /* MMUCR = 0 */ b 4f /* Get the PGD for the current thread and setup MMUCR */ 3: mfspr r11,SPRN_SPRG3 lwz r11,PGDIR(r11) mfspr r12,SPRN_PID /* Get PID */ 4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ /* Mask of required permission bits. Note that while we * do copy ESR:ST to _PAGE_RW position as trying to write * to an RO page is pretty common, we don't do it with * _PAGE_DIRTY. We could do it, but it's a fairly rare * event so I'd rather take the overhead when it happens * rather than adding an instruction here. We should measure * whether the whole thing is worth it in the first place * as we could avoid loading SPRN_ESR completely in the first * place... * * TODO: Is it worth doing that mfspr & rlwimi in the first * place or can we save a couple of instructions here ? */ mfspr r12,SPRN_ESR li r13,_PAGE_PRESENT|_PAGE_ACCESSED rlwimi r13,r12,10,30,30 /* Load the PTE */ /* Compute pgdir/pmd offset */ rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 lwzx r11,r12,r11 /* Get pgd/pmd entry */ /* Word 0 is EPN,V,TS,DSIZ */ li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ li r12,0 tlbwe r10,r12,0 /* XXX can we do better ? Need to make sure tlbwe has established * latch V bit in MMUCR0 before the PTE is loaded further down */ #ifdef CONFIG_SMP isync #endif rlwinm. r12,r11,0,0,20 /* Extract pt base address */ /* Compute pte address */ rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 beq 2f /* Bail if no table */ lwz r11,0(r12) /* Get high word of pte entry */ /* XXX can we do better ? maybe insert a known 0 bit from r11 into the * bottom of r12 to create a data dependency... We can also use r10 * as destination nowadays */ #ifdef CONFIG_SMP lwsync #endif lwz r12,4(r12) /* Get low word of pte entry */ andc. r13,r13,r12 /* Check permission */ /* Jump to common tlb load */ beq finish_tlb_load_47x 2: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ mfspr r11,SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13,SPRN_SPRG_RSCRATCH3 mfspr r12,SPRN_SPRG_RSCRATCH2 mfspr r11,SPRN_SPRG_RSCRATCH1 mfspr r10,SPRN_SPRG_RSCRATCH0 b DataStorage /* Instruction TLB Error Interrupt */ /* * Nearly the same as above, except we get our * information from different registers and bailout * to a different point. */ START_EXCEPTION(InstructionTLBError47x) mtspr SPRN_SPRG_WSCRATCH0,r10 /* Save some working registers */ mtspr SPRN_SPRG_WSCRATCH1,r11 mtspr SPRN_SPRG_WSCRATCH2,r12 mtspr SPRN_SPRG_WSCRATCH3,r13 mfcr r11 mtspr SPRN_SPRG_WSCRATCH4,r11 mfspr r10,SPRN_SRR0 /* Get faulting address */ /* If we are faulting a kernel address, we have to use the * kernel page tables. */ lis r11,PAGE_OFFSET@h cmplw cr0,r10,r11 blt+ 3f lis r11,swapper_pg_dir@h ori r11,r11, swapper_pg_dir@l li r12,0 /* MMUCR = 0 */ b 4f /* Get the PGD for the current thread and setup MMUCR */ 3: mfspr r11,SPRN_SPRG_THREAD lwz r11,PGDIR(r11) mfspr r12,SPRN_PID /* Get PID */ 4: mtspr SPRN_MMUCR,r12 /* Set MMUCR */ /* Make up the required permissions */ li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC /* Load PTE */ /* Compute pgdir/pmd offset */ rlwinm r12,r10,PPC44x_PGD_OFF_SHIFT,PPC44x_PGD_OFF_MASK_BIT,29 lwzx r11,r12,r11 /* Get pgd/pmd entry */ /* Word 0 is EPN,V,TS,DSIZ */ li r12,PPC47x_TLB0_VALID | PPC47x_TLBE_SIZE rlwimi r10,r12,0,32-PAGE_SHIFT,31 /* Insert valid and page size*/ li r12,0 tlbwe r10,r12,0 /* XXX can we do better ? Need to make sure tlbwe has established * latch V bit in MMUCR0 before the PTE is loaded further down */ #ifdef CONFIG_SMP isync #endif rlwinm. r12,r11,0,0,20 /* Extract pt base address */ /* Compute pte address */ rlwimi r12,r10,PPC44x_PTE_ADD_SHIFT,PPC44x_PTE_ADD_MASK_BIT,28 beq 2f /* Bail if no table */ lwz r11,0(r12) /* Get high word of pte entry */ /* XXX can we do better ? maybe insert a known 0 bit from r11 into the * bottom of r12 to create a data dependency... We can also use r10 * as destination nowadays */ #ifdef CONFIG_SMP lwsync #endif lwz r12,4(r12) /* Get low word of pte entry */ andc. r13,r13,r12 /* Check permission */ /* Jump to common TLB load point */ beq finish_tlb_load_47x 2: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. */ mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13, SPRN_SPRG_RSCRATCH3 mfspr r12, SPRN_SPRG_RSCRATCH2 mfspr r11, SPRN_SPRG_RSCRATCH1 mfspr r10, SPRN_SPRG_RSCRATCH0 b InstructionStorage /* * Both the instruction and data TLB miss get to this * point to load the TLB. * r10 - free to use * r11 - PTE high word value * r12 - PTE low word value * r13 - free to use * MMUCR - loaded with proper value when we get here * Upon exit, we reload everything and RFI. */ finish_tlb_load_47x: /* Combine RPN & ERPN an write WS 1 */ rlwimi r11,r12,0,0,31-PAGE_SHIFT tlbwe r11,r13,1 /* And make up word 2 */ li r10,0xf85 /* Mask to apply from PTE */ rlwimi r10,r12,29,30,30 /* DIRTY -> SW position */ and r11,r12,r10 /* Mask PTE bits to keep */ andi. r10,r12,_PAGE_USER /* User page ? */ beq 1f /* nope, leave U bits empty */ rlwimi r11,r11,3,26,28 /* yes, copy S bits to U */ 1: tlbwe r11,r13,2 /* Done...restore registers and get out of here. */ mfspr r11, SPRN_SPRG_RSCRATCH4 mtcr r11 mfspr r13, SPRN_SPRG_RSCRATCH3 mfspr r12, SPRN_SPRG_RSCRATCH2 mfspr r11, SPRN_SPRG_RSCRATCH1 mfspr r10, SPRN_SPRG_RSCRATCH0 rfi #endif /* CONFIG_PPC_47x */ /* Debug Interrupt */ /* * This statement needs to exist at the end of the IVPR * definition just in case you end up taking a debug * exception within another exception. */ DEBUG_CRIT_EXCEPTION /* * Global functions */ /* * Adjust the machine check IVOR on 440A cores */ _GLOBAL(__fixup_440A_mcheck) li r3,MachineCheckA@l mtspr SPRN_IVOR1,r3 sync blr /* * extern void giveup_altivec(struct task_struct *prev) * * The 44x core does not have an AltiVec unit. */ _GLOBAL(giveup_altivec) blr /* * extern void giveup_fpu(struct task_struct *prev) * * The 44x core does not have an FPU. */ #ifndef CONFIG_PPC_FPU _GLOBAL(giveup_fpu) blr #endif _GLOBAL(set_context) #ifdef CONFIG_BDI_SWITCH /* Context switch the PTE pointer for the Abatron BDI2000. * The PGDIR is the second parameter. */ lis r5, abatron_pteptrs@h ori r5, r5, abatron_pteptrs@l stw r4, 0x4(r5) #endif mtspr SPRN_PID,r3 isync /* Force context change */ blr /* * Init CPU state. This is called at boot time or for secondary CPUs * to setup initial TLB entries, setup IVORs, etc... * */ _GLOBAL(init_cpu_state) mflr r22 #ifdef CONFIG_PPC_47x /* We use the PVR to differenciate 44x cores from 476 */ mfspr r3,SPRN_PVR srwi r3,r3,16 cmplwi cr0,r3,PVR_476@h beq head_start_47x #endif /* CONFIG_PPC_47x */ /* * In case the firmware didn't do it, we apply some workarounds * that are good for all 440 core variants here */ mfspr r3,SPRN_CCR0 rlwinm r3,r3,0,0,27 /* disable icache prefetch */ isync mtspr SPRN_CCR0,r3 isync sync /* * Set up the initial MMU state for 44x * * We are still executing code at the virtual address * mappings set by the firmware for the base of RAM. * * We first invalidate all TLB entries but the one * we are running from. We then load the KERNELBASE * mappings so we can begin to use kernel addresses * natively and so the interrupt vector locations are * permanently pinned (necessary since Book E * implementations always have translation enabled). * * TODO: Use the known TLB entry we are running from to * determine which physical region we are located * in. This can be used to determine where in RAM * (on a shared CPU system) or PCI memory space * (on a DRAMless system) we are located. * For now, we assume a perfect world which means * we are located at the base of DRAM (physical 0). */ /* * Search TLB for entry that we are currently using. * Invalidate all entries but the one we are using. */ /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ mfspr r3,SPRN_PID /* Get PID */ mfmsr r4 /* Get MSR */ andi. r4,r4,MSR_IS@l /* TS=1? */ beq wmmucr /* If not, leave STS=0 */ oris r3,r3,PPC44x_MMUCR_STS@h /* Set STS=1 */ wmmucr: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ sync bl invstr /* Find our address */ invstr: mflr r5 /* Make it accessible */ tlbsx r23,0,r5 /* Find entry we are in */ li r4,0 /* Start at TLB entry 0 */ li r3,0 /* Set PAGEID inval value */ 1: cmpw r23,r4 /* Is this our entry? */ beq skpinv /* If so, skip the inval */ tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ skpinv: addi r4,r4,1 /* Increment */ cmpwi r4,64 /* Are we done? */ bne 1b /* If not, repeat */ isync /* If so, context change */ /* * Configure and load pinned entry into TLB slot 63. */ lis r3,PAGE_OFFSET@h ori r3,r3,PAGE_OFFSET@l /* Kernel is at the base of RAM */ li r4, 0 /* Load the kernel physical address */ /* Load the kernel PID = 0 */ li r0,0 mtspr SPRN_PID,r0 sync /* Initialize MMUCR */ li r5,0 mtspr SPRN_MMUCR,r5 sync /* pageid fields */ clrrwi r3,r3,10 /* Mask off the effective page number */ ori r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M /* xlat fields */ clrrwi r4,r4,10 /* Mask off the real page number */ /* ERPN is 0 for first 4GB page */ /* attrib fields */ /* Added guarded bit to protect against speculative loads/stores */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) li r0,63 /* TLB slot 63 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Load the attrib/access fields */ /* Force context change */ mfmsr r0 mtspr SPRN_SRR1, r0 lis r0,3f@h ori r0,r0,3f@l mtspr SPRN_SRR0,r0 sync rfi /* If necessary, invalidate original entry we used */ 3: cmpwi r23,63 beq 4f li r6,0 tlbwe r6,r23,PPC44x_TLB_PAGEID isync 4: #ifdef CONFIG_PPC_EARLY_DEBUG_44x /* Add UART mapping for early debug. */ /* pageid fields */ lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h ori r3,r3,PPC44x_TLB_VALID|PPC44x_TLB_TS|PPC44x_TLB_64K /* xlat fields */ lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH /* attrib fields */ li r5,(PPC44x_TLB_SW|PPC44x_TLB_SR|PPC44x_TLB_I|PPC44x_TLB_G) li r0,62 /* TLB slot 0 */ tlbwe r3,r0,PPC44x_TLB_PAGEID tlbwe r4,r0,PPC44x_TLB_XLAT tlbwe r5,r0,PPC44x_TLB_ATTRIB /* Force context change */ isync #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheck); SET_IVOR(2, DataStorage); SET_IVOR(3, InstructionStorage); SET_IVOR(4, ExternalInput); SET_IVOR(5, Alignment); SET_IVOR(6, Program); SET_IVOR(7, FloatingPointUnavailable); SET_IVOR(8, SystemCall); SET_IVOR(9, AuxillaryProcessorUnavailable); SET_IVOR(10, Decrementer); SET_IVOR(11, FixedIntervalTimer); SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError44x); SET_IVOR(14, InstructionTLBError44x); SET_IVOR(15, DebugCrit); b head_start_common #ifdef CONFIG_PPC_47x #ifdef CONFIG_SMP /* Entry point for secondary 47x processors */ _GLOBAL(start_secondary_47x) mr r24,r3 /* CPU number */ bl init_cpu_state /* Now we need to bolt the rest of kernel memory which * is done in C code. We must be careful because our task * struct or our stack can (and will probably) be out * of reach of the initial 256M TLB entry, so we use a * small temporary stack in .bss for that. This works * because only one CPU at a time can be in this code */ lis r1,temp_boot_stack@h ori r1,r1,temp_boot_stack@l addi r1,r1,1024-STACK_FRAME_OVERHEAD li r0,0 stw r0,0(r1) bl mmu_init_secondary /* Now we can get our task struct and real stack pointer */ /* Get current_thread_info and current */ lis r1,secondary_ti@ha lwz r1,secondary_ti@l(r1) lwz r2,TI_TASK(r1) /* Current stack pointer */ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD li r0,0 stw r0,0(r1) /* Kernel stack for exception entry in SPRG3 */ addi r4,r2,THREAD /* init task's THREAD */ mtspr SPRN_SPRG3,r4 b start_secondary #endif /* CONFIG_SMP */ /* * Set up the initial MMU state for 44x * * We are still executing code at the virtual address * mappings set by the firmware for the base of RAM. */ head_start_47x: /* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */ mfspr r3,SPRN_PID /* Get PID */ mfmsr r4 /* Get MSR */ andi. r4,r4,MSR_IS@l /* TS=1? */ beq 1f /* If not, leave STS=0 */ oris r3,r3,PPC47x_MMUCR_STS@h /* Set STS=1 */ 1: mtspr SPRN_MMUCR,r3 /* Put MMUCR */ sync /* Find the entry we are running from */ bl 1f 1: mflr r23 tlbsx r23,0,r23 tlbre r24,r23,0 tlbre r25,r23,1 tlbre r26,r23,2 /* * Cleanup time */ /* Initialize MMUCR */ li r5,0 mtspr SPRN_MMUCR,r5 sync clear_all_utlb_entries: #; Set initial values. addis r3,0,0x8000 addi r4,0,0 addi r5,0,0 b clear_utlb_entry #; Align the loop to speed things up. .align 6 clear_utlb_entry: tlbwe r4,r3,0 tlbwe r5,r3,1 tlbwe r5,r3,2 addis r3,r3,0x2000 cmpwi r3,0 bne clear_utlb_entry addis r3,0,0x8000 addis r4,r4,0x100 cmpwi r4,0 bne clear_utlb_entry #; Restore original entry. oris r23,r23,0x8000 /* specify the way */ tlbwe r24,r23,0 tlbwe r25,r23,1 tlbwe r26,r23,2 /* * Configure and load pinned entry into TLB for the kernel core */ lis r3,PAGE_OFFSET@h ori r3,r3,PAGE_OFFSET@l /* Kernel is at the base of RAM */ li r4, 0 /* Load the kernel physical address */ /* Load the kernel PID = 0 */ li r0,0 mtspr SPRN_PID,r0 sync /* Word 0 */ clrrwi r3,r3,12 /* Mask off the effective page number */ ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_256M /* Word 1 */ clrrwi r4,r4,12 /* Mask off the real page number */ /* ERPN is 0 for first 4GB page */ /* Word 2 */ li r5,0 ori r5,r5,PPC47x_TLB2_S_RWX #ifdef CONFIG_SMP ori r5,r5,PPC47x_TLB2_M #endif /* We write to way 0 and bolted 0 */ lis r0,0x8800 tlbwe r3,r0,0 tlbwe r4,r0,1 tlbwe r5,r0,2 /* * Configure SSPCR, ISPCR and USPCR for now to search everything, we can fix * them up later */ LOAD_REG_IMMEDIATE(r3, 0x9abcdef0) mtspr SPRN_SSPCR,r3 mtspr SPRN_USPCR,r3 LOAD_REG_IMMEDIATE(r3, 0x12345670) mtspr SPRN_ISPCR,r3 /* Force context change */ mfmsr r0 mtspr SPRN_SRR1, r0 lis r0,3f@h ori r0,r0,3f@l mtspr SPRN_SRR0,r0 sync rfi /* Invalidate original entry we used */ 3: rlwinm r24,r24,0,21,19 /* clear the "valid" bit */ tlbwe r24,r23,0 addi r24,0,0 tlbwe r24,r23,1 tlbwe r24,r23,2 isync /* Clear out the shadow TLB entries */ #ifdef CONFIG_PPC_EARLY_DEBUG_44x /* Add UART mapping for early debug. */ /* Word 0 */ lis r3,PPC44x_EARLY_DEBUG_VIRTADDR@h ori r3,r3,PPC47x_TLB0_VALID | PPC47x_TLB0_TS | PPC47x_TLB0_1M /* Word 1 */ lis r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW@h ori r4,r4,CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH /* Word 2 */ li r5,(PPC47x_TLB2_S_RW | PPC47x_TLB2_IMG) /* Bolted in way 0, bolt slot 5, we -hope- we don't hit the same * congruence class as the kernel, we need to make sure of it at * some point */ lis r0,0x8d00 tlbwe r3,r0,0 tlbwe r4,r0,1 tlbwe r5,r0,2 /* Force context change */ isync #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ /* Establish the interrupt vector offsets */ SET_IVOR(0, CriticalInput); SET_IVOR(1, MachineCheckA); SET_IVOR(2, DataStorage); SET_IVOR(3, InstructionStorage); SET_IVOR(4, ExternalInput); SET_IVOR(5, Alignment); SET_IVOR(6, Program); SET_IVOR(7, FloatingPointUnavailable); SET_IVOR(8, SystemCall); SET_IVOR(9, AuxillaryProcessorUnavailable); SET_IVOR(10, Decrementer); SET_IVOR(11, FixedIntervalTimer); SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError47x); SET_IVOR(14, InstructionTLBError47x); SET_IVOR(15, DebugCrit); /* We configure icbi to invalidate 128 bytes at a time since the * current 32-bit kernel code isn't too happy with icache != dcache * block size */ mfspr r3,SPRN_CCR0 oris r3,r3,0x0020 mtspr SPRN_CCR0,r3 isync #endif /* CONFIG_PPC_47x */ /* * Here we are back to code that is common between 44x and 47x * * We proceed to further kernel initialization and return to the * main kernel entry */ head_start_common: /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ mtspr SPRN_IVPR,r4 addis r22,r22,KERNELBASE@h mtlr r22 isync blr /* * We put a few things here that have to be page-aligned. This stuff * goes at the beginning of the data segment, which is page-aligned. */ .data .align PAGE_SHIFT .globl sdata sdata: .globl empty_zero_page empty_zero_page: .space PAGE_SIZE /* * To support >32-bit physical addresses, we use an 8KB pgdir. */ .globl swapper_pg_dir swapper_pg_dir: .space PGD_TABLE_SIZE /* * Room for two PTE pointers, usually the kernel and current user pointers * to their respective root page table. */ abatron_pteptrs: .space 8 #ifdef CONFIG_SMP .align 12 temp_boot_stack: .space 1024 #endif /* CONFIG_SMP */