/* * arch/arm/mach-ixp23xx/pci.c * * PCI routines for IXP23XX based systems * * Copyright (c) 2005 MontaVista Software, Inc. * * based on original code: * * Author: Naeem Afzal * Copyright 2002-2005 Intel Corp. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern int (*external_fault) (unsigned long, struct pt_regs *); static volatile int pci_master_aborts = 0; #ifdef DEBUG #define DBG(x...) printk(x) #else #define DBG(x...) #endif int clear_master_aborts(void); static u32 *ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where) { u32 *paddress; /* * Must be dword aligned */ where &= ~3; /* * For top bus, generate type 0, else type 1 */ if (!bus_nr) { if (PCI_SLOT(devfn) >= 8) return 0; paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT | (1 << (PCI_SLOT(devfn) + 16)) | (PCI_FUNC(devfn) << 8) | where); } else { paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT | (bus_nr << 16) | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | where); } return paddress; } /* * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. * 0 and 3 are not valid indexes... */ static u32 bytemask[] = { /*0*/ 0, /*1*/ 0xff, /*2*/ 0xffff, /*3*/ 0, /*4*/ 0xffffffff, }; static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) { u32 n; u32 *addr; n = where % 4; DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); addr = ixp23xx_pci_config_addr(bus->number, devfn, where); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; pci_master_aborts = 0; *value = (*addr >> (8*n)) & bytemask[size]; if (pci_master_aborts) { pci_master_aborts = 0; *value = 0xffffffff; return PCIBIOS_DEVICE_NOT_FOUND; } return PCIBIOS_SUCCESSFUL; } /* * We don't do error checking on the address for writes. * It's assumed that the user checked for the device existing first * by doing a read first. */ static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) { u32 mask; u32 *addr; u32 temp; mask = ~(bytemask[size] << ((where % 0x4) * 8)); addr = ixp23xx_pci_config_addr(bus->number, devfn, where); if (!addr) return PCIBIOS_DEVICE_NOT_FOUND; temp = (u32) (value) << ((where % 0x4) * 8); *addr = (*addr & mask) | temp; clear_master_aborts(); return PCIBIOS_SUCCESSFUL; } struct pci_ops ixp23xx_pci_ops = { .read = ixp23xx_pci_read_config, .write = ixp23xx_pci_write_config, }; struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata) { return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata); } int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { volatile unsigned long temp; unsigned long flags; pci_master_aborts = 1; local_irq_save(flags); temp = *IXP23XX_PCI_CONTROL; /* * master abort and cmd tgt err */ if (temp & ((1 << 8) | (1 << 5))) *IXP23XX_PCI_CONTROL = temp; temp = *IXP23XX_PCI_CMDSTAT; if (temp & (1 << 29)) *IXP23XX_PCI_CMDSTAT = temp; local_irq_restore(flags); /* * If it was an imprecise abort, then we need to correct the * return address to be _after_ the instruction. */ if (fsr & (1 << 10)) regs->ARM_pc += 4; return 0; } int clear_master_aborts(void) { volatile u32 temp; temp = *IXP23XX_PCI_CONTROL; /* * master abort and cmd tgt err */ if (temp & ((1 << 8) | (1 << 5))) *IXP23XX_PCI_CONTROL = temp; temp = *IXP23XX_PCI_CMDSTAT; if (temp & (1 << 29)) *IXP23XX_PCI_CMDSTAT = temp; return 0; } static void __init ixp23xx_pci_common_init(void) { #ifdef __ARMEB__ *IXP23XX_PCI_CONTROL |= 0x20000; /* set I/O swapping */ #endif /* * ADDR_31 needs to be clear for PCI memory access to CPP memory */ *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31; *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF; /* * Select correct memory for PCI inbound transactions */ if (ixp23xx_cpp_boot()) { *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1); } else { *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1); /* * Enable coherency on A2 silicon. */ if (arch_is_coherent()) *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF; } } void __init ixp23xx_pci_preinit(void) { pci_set_flags(0); ixp23xx_pci_common_init(); hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, "PCI config cycle to non-existent device"); *IXP23XX_PCI_ADDR_EXT = 0x0000e000; } /* * Prevent PCI layer from seeing the inbound host-bridge resources */ static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev) { int i; dev->class &= 0xff; dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < PCI_NUM_RESOURCES; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; dev->resource[i].flags = 0; } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx); /* * IXP2300 systems often have large resource requirements, so we just * use our own resource space. */ static struct resource ixp23xx_pci_mem_space = { .start = IXP23XX_PCI_MEM_START, .end = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1, .flags = IORESOURCE_MEM, .name = "PCI Mem Space" }; static struct resource ixp23xx_pci_io_space = { .start = 0x00000100, .end = 0x01ffffff, .flags = IORESOURCE_IO, .name = "PCI I/O Space" }; int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys) { if (nr >= 1) return 0; sys->resource[0] = &ixp23xx_pci_io_space; sys->resource[1] = &ixp23xx_pci_mem_space; sys->resource[2] = NULL; return 1; } void __init ixp23xx_pci_slave_init(void) { ixp23xx_pci_common_init(); }