/* * libata-scsi.c - helper library for ATA * * Maintained by: Jeff Garzik * Please ALWAYS copy linux-ide@vger.kernel.org * on emails. * * Copyright 2003-2004 Red Hat, Inc. All rights reserved. * Copyright 2003-2004 Jeff Garzik * * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; see the file COPYING. If not, write to * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. * * * libata documentation is available via 'make {ps|pdf}docs', * as Documentation/DocBook/libata.* * * Hardware documentation available from * - http://www.t10.org/ * - http://www.t13.org/ * */ #include #include #include #include #include "scsi.h" #include #include #include #include "libata.h" typedef unsigned int (*ata_xlat_func_t)(struct ata_queued_cmd *qc, u8 *scsicmd); static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined * @bdev: block device associated with @sdev * @capacity: capacity of SCSI device * @geom: location to which geometry will be output * * Generic bios head/sector/cylinder calculator * used by sd. Most BIOSes nowadays expect a XXX/255/16 (CHS) * mapping. Some situations may arise where the disk is not * bootable if this is not used. * * LOCKING: * Defined by the SCSI layer. We don't really care. * * RETURNS: * Zero. */ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev, sector_t capacity, int geom[]) { geom[0] = 255; geom[1] = 63; sector_div(capacity, 255*63); geom[2] = capacity; return 0; } int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg) { struct ata_port *ap; struct ata_device *dev; int val = -EINVAL, rc = -EINVAL; ap = (struct ata_port *) &scsidev->host->hostdata[0]; if (!ap) goto out; dev = ata_scsi_find_dev(ap, scsidev); if (!dev) { rc = -ENODEV; goto out; } switch (cmd) { case ATA_IOC_GET_IO32: val = 0; if (copy_to_user(arg, &val, 1)) return -EFAULT; return 0; case ATA_IOC_SET_IO32: val = (unsigned long) arg; if (val != 0) return -EINVAL; return 0; default: rc = -ENOTTY; break; } out: return rc; } /** * ata_scsi_qc_new - acquire new ata_queued_cmd reference * @ap: ATA port to which the new command is attached * @dev: ATA device to which the new command is attached * @cmd: SCSI command that originated this ATA command * @done: SCSI command completion function * * Obtain a reference to an unused ata_queued_cmd structure, * which is the basic libata structure representing a single * ATA command sent to the hardware. * * If a command was available, fill in the SCSI-specific * portions of the structure with information on the * current command. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Command allocated, or %NULL if none available. */ struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap, struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_queued_cmd *qc; qc = ata_qc_new_init(ap, dev); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; if (cmd->use_sg) { qc->__sg = (struct scatterlist *) cmd->request_buffer; qc->n_elem = cmd->use_sg; } else { qc->__sg = &qc->sgent; qc->n_elem = 1; } } else { cmd->result = (DID_OK << 16) | (QUEUE_FULL << 1); done(cmd); } return qc; } /** * ata_to_sense_error - convert ATA error to SCSI error * @qc: Command that we are erroring out * @drv_stat: value contained in ATA status register * * Converts an ATA error into a SCSI error. While we are at it * we decode and dump the ATA error for the user so that they * have some idea what really happened at the non make-believe * layer. * * LOCKING: * spin_lock_irqsave(host_set lock) */ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; u8 err = 0; unsigned char *sb = cmd->sense_buffer; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ {0xd1, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command /* BBD|ECC|ID */ {0xd0, ABORTED_COMMAND, 0x00, 0x00}, // Device busy Aborted command /* ECC|MC|MARK */ {0x61, HARDWARE_ERROR, 0x00, 0x00}, // Device fault Hardware error /* ICRC|ABRT */ /* NB: ICRC & !ABRT is BBD */ {0x84, ABORTED_COMMAND, 0x47, 0x00}, // Data CRC error SCSI parity error /* MC|ID|ABRT|TRK0|MARK */ {0x37, NOT_READY, 0x04, 0x00}, // Unit offline Not ready /* MCR|MARK */ {0x09, NOT_READY, 0x04, 0x00}, // Unrecovered disk error Not ready /* Bad address mark */ {0x01, MEDIUM_ERROR, 0x13, 0x00}, // Address mark not found Address mark not found for data field /* TRK0 */ {0x02, HARDWARE_ERROR, 0x00, 0x00}, // Track 0 not found Hardware error /* Abort & !ICRC */ {0x04, ABORTED_COMMAND, 0x00, 0x00}, // Aborted command Aborted command /* Media change request */ {0x08, NOT_READY, 0x04, 0x00}, // Media change request FIXME: faking offline /* SRV */ {0x10, ABORTED_COMMAND, 0x14, 0x00}, // ID not found Recorded entity not found /* Media change */ {0x08, NOT_READY, 0x04, 0x00}, // Media change FIXME: faking offline /* ECC */ {0x40, MEDIUM_ERROR, 0x11, 0x04}, // Uncorrectable ECC error Unrecovered read error /* BBD - block marked bad */ {0x80, MEDIUM_ERROR, 0x11, 0x04}, // Block marked bad Medium error, unrecovered read error {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; static unsigned char stat_table[][4] = { /* Must be first because BUSY means no other bits valid */ {0x80, ABORTED_COMMAND, 0x47, 0x00}, // Busy, fake parity for now {0x20, HARDWARE_ERROR, 0x00, 0x00}, // Device fault {0x08, ABORTED_COMMAND, 0x47, 0x00}, // Timed out in xfer, fake parity for now {0x04, RECOVERED_ERROR, 0x11, 0x00}, // Recovered ECC error Medium error, recovered {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; int i = 0; cmd->result = SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse */ if(drv_stat & ATA_ERR) /* Read the err bits */ err = ata_chk_err(qc->ap); /* Display the ATA level error info */ printk(KERN_WARNING "ata%u: status=0x%02x { ", qc->ap->id, drv_stat); if(drv_stat & 0x80) { printk("Busy "); err = 0; /* Data is not valid in this case */ } else { if(drv_stat & 0x40) printk("DriveReady "); if(drv_stat & 0x20) printk("DeviceFault "); if(drv_stat & 0x10) printk("SeekComplete "); if(drv_stat & 0x08) printk("DataRequest "); if(drv_stat & 0x04) printk("CorrectedError "); if(drv_stat & 0x02) printk("Index "); if(drv_stat & 0x01) printk("Error "); } printk("}\n"); if(err) { printk(KERN_WARNING "ata%u: error=0x%02x { ", qc->ap->id, err); if(err & 0x04) printk("DriveStatusError "); if(err & 0x80) { if(err & 0x04) printk("BadCRC "); else printk("Sector "); } if(err & 0x40) printk("UncorrectableError "); if(err & 0x10) printk("SectorIdNotFound "); if(err & 0x02) printk("TrackZeroNotFound "); if(err & 0x01) printk("AddrMarkNotFound "); printk("}\n"); /* Should we dump sector info here too ?? */ } /* Look for err */ while(sense_table[i][0] != 0xFF) { /* Look for best matches first */ if((sense_table[i][0] & err) == sense_table[i][0]) { sb[0] = 0x70; sb[2] = sense_table[i][1]; sb[7] = 0x0a; sb[12] = sense_table[i][2]; sb[13] = sense_table[i][3]; return; } i++; } /* No immediate match */ if(err) printk(KERN_DEBUG "ata%u: no sense translation for 0x%02x\n", qc->ap->id, err); i = 0; /* Fall back to interpreting status bits */ while(stat_table[i][0] != 0xFF) { if(stat_table[i][0] & drv_stat) { sb[0] = 0x70; sb[2] = stat_table[i][1]; sb[7] = 0x0a; sb[12] = stat_table[i][2]; sb[13] = stat_table[i][3]; return; } i++; } /* No error ?? */ printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); /* additional-sense-code[-qualifier] */ sb[0] = 0x70; sb[2] = MEDIUM_ERROR; sb[7] = 0x0A; if (cmd->sc_data_direction == DMA_FROM_DEVICE) { sb[12] = 0x11; /* "unrecovered read error" */ sb[13] = 0x04; } else { sb[12] = 0x0C; /* "write error - */ sb[13] = 0x02; /* auto-reallocation failed" */ } } /** * ata_scsi_slave_config - Set SCSI device attributes * @sdev: SCSI device to examine * * This is called before we actually start reading * and writing to the device, to configure certain * SCSI mid-layer behaviors. * * LOCKING: * Defined by SCSI layer. We don't really care. */ int ata_scsi_slave_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD); if (sdev->id < ATA_MAX_DEVICES) { struct ata_port *ap; struct ata_device *dev; ap = (struct ata_port *) &sdev->host->hostdata[0]; dev = &ap->device[sdev->id]; /* TODO: 1024 is an arbitrary number, not the * hardware maximum. This should be increased to * 65534 when Jens Axboe's patch for dynamically * determining max_sectors is merged. */ if ((dev->flags & ATA_DFLAG_LBA48) && ((dev->flags & ATA_DFLAG_LOCK_SECTORS) == 0)) { /* * do not overwrite sdev->host->max_sectors, since * other drives on this host may not support LBA48 */ blk_queue_max_sectors(sdev->request_queue, 2048); } /* * SATA DMA transfers must be multiples of 4 byte, so * we need to pad ATAPI transfers using an extra sg. * Decrement max hw segments accordingly. */ if (dev->class == ATA_DEV_ATAPI) { request_queue_t *q = sdev->request_queue; blk_queue_max_hw_segments(q, q->max_hw_segments - 1); } } return 0; /* scsi layer doesn't check return value, sigh */ } /** * ata_scsi_error - SCSI layer error handler callback * @host: SCSI host on which error occurred * * Handles SCSI-layer-thrown error events. * * LOCKING: * Inherited from SCSI layer (none, can sleep) * * RETURNS: * Zero. */ int ata_scsi_error(struct Scsi_Host *host) { struct ata_port *ap; DPRINTK("ENTER\n"); ap = (struct ata_port *) &host->hostdata[0]; ap->ops->eng_timeout(ap); /* TODO: this is per-command; when queueing is supported * this code will either change or move to a more * appropriate place */ host->host_failed--; INIT_LIST_HEAD(&host->eh_cmd_q); DPRINTK("EXIT\n"); return 0; } /** * ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate * * Sets up an ATA taskfile to issue STANDBY (to stop) or READ VERIFY * (to start). Perhaps these commands should be preceded by * CHECK POWER MODE to see what power mode the device is already in. * [See SAT revision 5 at www.t10.org] * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Zero on success, non-zero on error. */ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; tf->flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR; tf->protocol = ATA_PROT_NODATA; if (scsicmd[1] & 0x1) { ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) return 1; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) return 1; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ tf->lbah = 0x0; tf->lbam = 0x0; tf->lbal = 0x0; tf->device |= ATA_LBA; tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ tf->command = ATA_CMD_STANDBY; /* Consider: ATA STANDBY IMMEDIATE command */ } /* * Standby and Idle condition timers could be implemented but that * would require libata to implement the Power condition mode page * and allow the user to change it. Changing mode pages requires * MODE SELECT to be implemented. */ return 0; } /** * ata_scsi_flush_xlat - Translate SCSI SYNCHRONIZE CACHE command * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate (ignored) * * Sets up an ATA taskfile to issue FLUSH CACHE or * FLUSH CACHE EXT. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Zero on success, non-zero on error. */ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; tf->flags |= ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; if ((tf->flags & ATA_TFLAG_LBA48) && (ata_id_has_flush_ext(qc->dev->id))) tf->command = ATA_CMD_FLUSH_EXT; else tf->command = ATA_CMD_FLUSH; return 0; } /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate * * Converts SCSI VERIFY command to an ATA READ VERIFY command. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Zero on success, non-zero on error. */ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; u64 sect = 0; u32 n_sect = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; tf->device |= ATA_LBA; if (scsicmd[0] == VERIFY) { sect |= ((u64)scsicmd[2]) << 24; sect |= ((u64)scsicmd[3]) << 16; sect |= ((u64)scsicmd[4]) << 8; sect |= ((u64)scsicmd[5]); n_sect |= ((u32)scsicmd[7]) << 8; n_sect |= ((u32)scsicmd[8]); } else if (scsicmd[0] == VERIFY_16) { sect |= ((u64)scsicmd[2]) << 56; sect |= ((u64)scsicmd[3]) << 48; sect |= ((u64)scsicmd[4]) << 40; sect |= ((u64)scsicmd[5]) << 32; sect |= ((u64)scsicmd[6]) << 24; sect |= ((u64)scsicmd[7]) << 16; sect |= ((u64)scsicmd[8]) << 8; sect |= ((u64)scsicmd[9]); n_sect |= ((u32)scsicmd[10]) << 24; n_sect |= ((u32)scsicmd[11]) << 16; n_sect |= ((u32)scsicmd[12]) << 8; n_sect |= ((u32)scsicmd[13]); } else return 1; if (!n_sect) return 1; if (sect >= dev_sectors) return 1; if ((sect + n_sect) > dev_sectors) return 1; if (lba48) { if (n_sect > (64 * 1024)) return 1; } else { if (n_sect > 256) return 1; } if (lba48) { tf->command = ATA_CMD_VERIFY_EXT; tf->hob_nsect = (n_sect >> 8) & 0xff; tf->hob_lbah = (sect >> 40) & 0xff; tf->hob_lbam = (sect >> 32) & 0xff; tf->hob_lbal = (sect >> 24) & 0xff; } else { tf->command = ATA_CMD_VERIFY; tf->device |= (sect >> 24) & 0xf; } tf->nsect = n_sect & 0xff; tf->lbah = (sect >> 16) & 0xff; tf->lbam = (sect >> 8) & 0xff; tf->lbal = sect & 0xff; return 0; } /** * ata_scsi_rw_xlat - Translate SCSI r/w command into an ATA one * @qc: Storage for translated ATA taskfile * @scsicmd: SCSI command to translate * * Converts any of six SCSI read/write commands into the * ATA counterpart, including starting sector (LBA), * sector count, and taking into account the device's LBA48 * support. * * Commands %READ_6, %READ_10, %READ_16, %WRITE_6, %WRITE_10, and * %WRITE_16 are currently supported. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Zero on success, non-zero on error. */ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; tf->device |= ATA_LBA; if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || scsicmd[0] == READ_16) { tf->command = qc->dev->read_cmd; } else { tf->command = qc->dev->write_cmd; tf->flags |= ATA_TFLAG_WRITE; } if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { if (lba48) { tf->hob_nsect = scsicmd[7]; tf->hob_lbal = scsicmd[2]; qc->nsect = ((unsigned int)scsicmd[7] << 8) | scsicmd[8]; } else { /* if we don't support LBA48 addressing, the request * -may- be too large. */ if ((scsicmd[2] & 0xf0) || scsicmd[7]) return 1; /* stores LBA27:24 in lower 4 bits of device reg */ tf->device |= scsicmd[2]; qc->nsect = scsicmd[8]; } tf->nsect = scsicmd[8]; tf->lbal = scsicmd[5]; tf->lbam = scsicmd[4]; tf->lbah = scsicmd[3]; VPRINTK("ten-byte command\n"); if (qc->nsect == 0) /* we don't support length==0 cmds */ return 1; return 0; } if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { qc->nsect = tf->nsect = scsicmd[4]; if (!qc->nsect) { qc->nsect = 256; if (lba48) tf->hob_nsect = 1; } tf->lbal = scsicmd[3]; tf->lbam = scsicmd[2]; tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ VPRINTK("six-byte command\n"); return 0; } if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { /* rule out impossible LBAs and sector counts */ if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) return 1; if (lba48) { tf->hob_nsect = scsicmd[12]; tf->hob_lbal = scsicmd[6]; tf->hob_lbam = scsicmd[5]; tf->hob_lbah = scsicmd[4]; qc->nsect = ((unsigned int)scsicmd[12] << 8) | scsicmd[13]; } else { /* once again, filter out impossible non-zero values */ if (scsicmd[4] || scsicmd[5] || scsicmd[12] || (scsicmd[6] & 0xf0)) return 1; /* stores LBA27:24 in lower 4 bits of device reg */ tf->device |= scsicmd[6]; qc->nsect = scsicmd[13]; } tf->nsect = scsicmd[13]; tf->lbal = scsicmd[9]; tf->lbam = scsicmd[8]; tf->lbah = scsicmd[7]; VPRINTK("sixteen-byte command\n"); if (qc->nsect == 0) /* we don't support length==0 cmds */ return 1; return 0; } DPRINTK("no-byte command\n"); return 1; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) ata_to_sense_error(qc, drv_stat); else cmd->result = SAM_STAT_GOOD; qc->scsidone(cmd); return 0; } /** * ata_scsi_translate - Translate then issue SCSI command to ATA device * @ap: ATA port to which the command is addressed * @dev: ATA device to which the command is addressed * @cmd: SCSI command to execute * @done: SCSI command completion function * @xlat_func: Actor which translates @cmd to an ATA taskfile * * Our ->queuecommand() function has decided that the SCSI * command issued can be directly translated into an ATA * command, rather than handled internally. * * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * * LOCKING: * spin_lock_irqsave(host_set lock) */ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), ata_xlat_func_t xlat_func) { struct ata_queued_cmd *qc; u8 *scsicmd = cmd->cmnd; VPRINTK("ENTER\n"); qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) return; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_TO_DEVICE) { if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); goto err_out; } if (cmd->use_sg) ata_sg_init(qc, cmd->request_buffer, cmd->use_sg); else ata_sg_init_one(qc, cmd->request_buffer, cmd->request_bufflen); qc->dma_dir = cmd->sc_data_direction; } qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) goto err_out; /* select device, send command to hardware */ if (ata_qc_issue(qc)) goto err_out; VPRINTK("EXIT\n"); return; err_out: ata_qc_free(qc); ata_bad_cdb(cmd, done); DPRINTK("EXIT - badcmd\n"); } /** * ata_scsi_rbuf_get - Map response buffer. * @cmd: SCSI command containing buffer to be mapped. * @buf_out: Pointer to mapped area. * * Maps buffer contained within SCSI command @cmd. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Length of response buffer. */ static unsigned int ata_scsi_rbuf_get(struct scsi_cmnd *cmd, u8 **buf_out) { u8 *buf; unsigned int buflen; if (cmd->use_sg) { struct scatterlist *sg; sg = (struct scatterlist *) cmd->request_buffer; buf = kmap_atomic(sg->page, KM_USER0) + sg->offset; buflen = sg->length; } else { buf = cmd->request_buffer; buflen = cmd->request_bufflen; } *buf_out = buf; return buflen; } /** * ata_scsi_rbuf_put - Unmap response buffer. * @cmd: SCSI command containing buffer to be unmapped. * @buf: buffer to unmap * * Unmaps response buffer contained within @cmd. * * LOCKING: * spin_lock_irqsave(host_set lock) */ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) { if (cmd->use_sg) { struct scatterlist *sg; sg = (struct scatterlist *) cmd->request_buffer; kunmap_atomic(buf - sg->offset, KM_USER0); } } /** * ata_scsi_rbuf_fill - wrapper for SCSI command simulators * @args: device IDENTIFY data / SCSI command of interest. * @actor: Callback hook for desired SCSI command simulator * * Takes care of the hard work of simulating a SCSI command... * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be * completed successfully, or not. * * LOCKING: * spin_lock_irqsave(host_set lock) */ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)) { u8 *rbuf; unsigned int buflen, rc; struct scsi_cmnd *cmd = args->cmd; buflen = ata_scsi_rbuf_get(cmd, &rbuf); memset(rbuf, 0, buflen); rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); if (rc) ata_bad_cdb(cmd, args->done); else { cmd->result = SAM_STAT_GOOD; args->done(cmd); } } /** * ata_scsiop_inq_std - Simulate INQUIRY command * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Returns standard device identification data associated * with non-EVPD INQUIRY command output. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { u8 hdr[] = { TYPE_DISK, 0, 0x5, /* claim SPC-3 version compatibility */ 2, 95 - 4 }; /* set scsi removeable (RMB) bit per ata bit */ if (ata_id_removeable(args->id)) hdr[1] |= (1 << 7); VPRINTK("ENTER\n"); memcpy(rbuf, hdr, sizeof(hdr)); if (buflen > 35) { memcpy(&rbuf[8], "ATA ", 8); ata_dev_id_string(args->id, &rbuf[16], ATA_ID_PROD_OFS, 16); ata_dev_id_string(args->id, &rbuf[32], ATA_ID_FW_REV_OFS, 4); if (rbuf[32] == 0 || rbuf[32] == ' ') memcpy(&rbuf[32], "n/a ", 4); } if (buflen > 63) { const u8 versions[] = { 0x60, /* SAM-3 (no version claimed) */ 0x03, 0x20, /* SBC-2 (no version claimed) */ 0x02, 0x60 /* SPC-3 (no version claimed) */ }; memcpy(rbuf + 59, versions, sizeof(versions)); } return 0; } /** * ata_scsiop_inq_00 - Simulate INQUIRY EVPD page 0, list of pages * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Returns list of inquiry EVPD pages available. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_inq_00(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { const u8 pages[] = { 0x00, /* page 0x00, this page */ 0x80, /* page 0x80, unit serial no page */ 0x83 /* page 0x83, device ident page */ }; rbuf[3] = sizeof(pages); /* number of supported EVPD pages */ if (buflen > 6) memcpy(rbuf + 4, pages, sizeof(pages)); return 0; } /** * ata_scsiop_inq_80 - Simulate INQUIRY EVPD page 80, device serial number * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Returns ATA device serial number. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_inq_80(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { const u8 hdr[] = { 0, 0x80, /* this page code */ 0, ATA_SERNO_LEN, /* page len */ }; memcpy(rbuf, hdr, sizeof(hdr)); if (buflen > (ATA_SERNO_LEN + 4 - 1)) ata_dev_id_string(args->id, (unsigned char *) &rbuf[4], ATA_ID_SERNO_OFS, ATA_SERNO_LEN); return 0; } static const char *inq_83_str = "Linux ATA-SCSI simulator"; /** * ata_scsiop_inq_83 - Simulate INQUIRY EVPD page 83, device identity * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Returns device identification. Currently hardcoded to * return "Linux ATA-SCSI simulator". * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_inq_83(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { rbuf[1] = 0x83; /* this page code */ rbuf[3] = 4 + strlen(inq_83_str); /* page len */ /* our one and only identification descriptor (vendor-specific) */ if (buflen > (strlen(inq_83_str) + 4 + 4 - 1)) { rbuf[4 + 0] = 2; /* code set: ASCII */ rbuf[4 + 3] = strlen(inq_83_str); memcpy(rbuf + 4 + 4, inq_83_str, strlen(inq_83_str)); } return 0; } /** * ata_scsiop_noop - Command handler that simply returns success. * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * No operation. Simply returns success to caller, to indicate * that the caller should successfully complete this SCSI command. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_noop(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { VPRINTK("ENTER\n"); return 0; } /** * ata_msense_push - Push data onto MODE SENSE data output buffer * @ptr_io: (input/output) Location to store more output data * @last: End of output data buffer * @buf: Pointer to BLOB being added to output buffer * @buflen: Length of BLOB * * Store MODE SENSE data on an output buffer. * * LOCKING: * None. */ static void ata_msense_push(u8 **ptr_io, const u8 *last, const u8 *buf, unsigned int buflen) { u8 *ptr = *ptr_io; if ((ptr + buflen - 1) > last) return; memcpy(ptr, buf, buflen); ptr += buflen; *ptr_io = ptr; } /** * ata_msense_caching - Simulate MODE SENSE caching info page * @id: device IDENTIFY data * @ptr_io: (input/output) Location to store more output data * @last: End of output data buffer * * Generate a caching info page, which conditionally indicates * write caching to the SCSI layer, depending on device * capabilities. * * LOCKING: * None. */ static unsigned int ata_msense_caching(u16 *id, u8 **ptr_io, const u8 *last) { u8 page[] = { 0x8, /* page code */ 0x12, /* page length */ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, /* 10 zeroes */ 0, 0, 0, 0, 0, 0, 0, 0 /* 8 zeroes */ }; if (ata_id_wcache_enabled(id)) page[2] |= (1 << 2); /* write cache enable */ if (!ata_id_rahead_enabled(id)) page[12] |= (1 << 5); /* disable read ahead */ ata_msense_push(ptr_io, last, page, sizeof(page)); return sizeof(page); } /** * ata_msense_ctl_mode - Simulate MODE SENSE control mode page * @dev: Device associated with this MODE SENSE command * @ptr_io: (input/output) Location to store more output data * @last: End of output data buffer * * Generate a generic MODE SENSE control mode page. * * LOCKING: * None. */ static unsigned int ata_msense_ctl_mode(u8 **ptr_io, const u8 *last) { const u8 page[] = {0xa, 0xa, 6, 0, 0, 0, 0, 0, 0xff, 0xff, 0, 30}; /* byte 2: set the descriptor format sense data bit (bit 2) * since we need to support returning this format for SAT * commands and any SCSI commands against a 48b LBA device. */ ata_msense_push(ptr_io, last, page, sizeof(page)); return sizeof(page); } /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page * @dev: Device associated with this MODE SENSE command * @ptr_io: (input/output) Location to store more output data * @last: End of output data buffer * * Generate a generic MODE SENSE r/w error recovery page. * * LOCKING: * None. */ static unsigned int ata_msense_rw_recovery(u8 **ptr_io, const u8 *last) { const u8 page[] = { 0x1, /* page code */ 0xa, /* page length */ (1 << 7) | (1 << 6), /* note auto r/w reallocation */ 0, 0, 0, 0, 0, 0, 0, 0, 0 /* 9 zeroes */ }; ata_msense_push(ptr_io, last, page, sizeof(page)); return sizeof(page); } /** * ata_scsiop_mode_sense - Simulate MODE SENSE 6, 10 commands * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Simulate MODE SENSE commands. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { u8 *scsicmd = args->cmd->cmnd, *p, *last; unsigned int page_control, six_byte, output_len; VPRINTK("ENTER\n"); six_byte = (scsicmd[0] == MODE_SENSE); /* we only support saved and current values (which we treat * in the same manner) */ page_control = scsicmd[2] >> 6; if ((page_control != 0) && (page_control != 3)) return 1; if (six_byte) output_len = 4; else output_len = 8; p = rbuf + output_len; last = rbuf + buflen - 1; switch(scsicmd[2] & 0x3f) { case 0x01: /* r/w error recovery */ output_len += ata_msense_rw_recovery(&p, last); break; case 0x08: /* caching */ output_len += ata_msense_caching(args->id, &p, last); break; case 0x0a: { /* control mode */ output_len += ata_msense_ctl_mode(&p, last); break; } case 0x3f: /* all pages */ output_len += ata_msense_rw_recovery(&p, last); output_len += ata_msense_caching(args->id, &p, last); output_len += ata_msense_ctl_mode(&p, last); break; default: /* invalid page code */ return 1; } if (six_byte) { output_len--; rbuf[0] = output_len; } else { output_len -= 2; rbuf[0] = output_len >> 8; rbuf[1] = output_len; } return 0; } /** * ata_scsiop_read_cap - Simulate READ CAPACITY[ 16] commands * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Simulate READ CAPACITY commands. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { u64 n_sectors; u32 tmp; VPRINTK("ENTER\n"); if (ata_id_has_lba48(args->id)) n_sectors = ata_id_u64(args->id, 100); else n_sectors = ata_id_u32(args->id, 60); n_sectors--; /* ATA TotalUserSectors - 1 */ if (args->cmd->cmnd[0] == READ_CAPACITY) { if( n_sectors >= 0xffffffffULL ) tmp = 0xffffffff ; /* Return max count on overflow */ else tmp = n_sectors ; /* sector count, 32-bit */ rbuf[0] = tmp >> (8 * 3); rbuf[1] = tmp >> (8 * 2); rbuf[2] = tmp >> (8 * 1); rbuf[3] = tmp; /* sector size */ tmp = ATA_SECT_SIZE; rbuf[6] = tmp >> 8; rbuf[7] = tmp; } else { /* sector count, 64-bit */ tmp = n_sectors >> (8 * 4); rbuf[2] = tmp >> (8 * 3); rbuf[3] = tmp >> (8 * 2); rbuf[4] = tmp >> (8 * 1); rbuf[5] = tmp; tmp = n_sectors; rbuf[6] = tmp >> (8 * 3); rbuf[7] = tmp >> (8 * 2); rbuf[8] = tmp >> (8 * 1); rbuf[9] = tmp; /* sector size */ tmp = ATA_SECT_SIZE; rbuf[12] = tmp >> 8; rbuf[13] = tmp; } return 0; } /** * ata_scsiop_report_luns - Simulate REPORT LUNS command * @args: device IDENTIFY data / SCSI command of interest. * @rbuf: Response buffer, to which simulated SCSI cmd output is sent. * @buflen: Response buffer length. * * Simulate REPORT LUNS command. * * LOCKING: * spin_lock_irqsave(host_set lock) */ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen) { VPRINTK("ENTER\n"); rbuf[3] = 8; /* just one lun, LUN 0, size 8 bytes */ return 0; } /** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled * @done: SCSI command completion function * @asc: SCSI-defined additional sense code * @ascq: SCSI-defined additional sense code qualifier * * Helper function that completes a SCSI command with * %SAM_STAT_CHECK_CONDITION, with a sense key %ILLEGAL_REQUEST * and the specified additional sense codes. * * LOCKING: * spin_lock_irqsave(host_set lock) */ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); cmd->result = SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ cmd->sense_buffer[12] = asc; cmd->sense_buffer[13] = ascq; done(cmd); } static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { DPRINTK("request check condition\n"); cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); return 1; } else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { u8 *buf = NULL; unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); buf[2] = 0x5; buf[3] = (buf[3] & 0xf0) | 2; ata_scsi_rbuf_put(cmd, buf); } cmd->result = SAM_STAT_GOOD; } qc->scsidone(cmd); return 0; } /** * atapi_xlat - Initialize PACKET taskfile * @qc: command structure to be initialized * @scsicmd: SCSI CDB associated with this PACKET command * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Zero on success, non-zero on failure. */ static unsigned int atapi_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct scsi_cmnd *cmd = qc->scsicmd; struct ata_device *dev = qc->dev; int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (cmd->sc_data_direction == DMA_NONE); if (!using_pio) /* Check whether ATAPI DMA is safe */ if (ata_check_atapi_dma(qc)) using_pio = 1; memcpy(&qc->cdb, scsicmd, qc->ap->cdb_len); qc->complete_fn = atapi_qc_complete; qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; if (cmd->sc_data_direction == DMA_TO_DEVICE) { qc->tf.flags |= ATA_TFLAG_WRITE; DPRINTK("direction: write\n"); } qc->tf.command = ATA_CMD_PACKET; /* no data, or PIO data xfer */ if (using_pio || nodata) { if (nodata) qc->tf.protocol = ATA_PROT_ATAPI_NODATA; else qc->tf.protocol = ATA_PROT_ATAPI; qc->tf.lbam = (8 * 1024) & 0xff; qc->tf.lbah = (8 * 1024) >> 8; } /* DMA data xfer */ else { qc->tf.protocol = ATA_PROT_ATAPI_DMA; qc->tf.feature |= ATAPI_PKT_DMA; #ifdef ATAPI_ENABLE_DMADIR /* some SATA bridges need us to indicate data xfer direction */ if (cmd->sc_data_direction != DMA_TO_DEVICE) qc->tf.feature |= ATAPI_DMADIR; #endif } qc->nbytes = cmd->bufflen; return 0; } /** * ata_scsi_find_dev - lookup ata_device from scsi_cmnd * @ap: ATA port to which the device is attached * @scsidev: SCSI device from which we derive the ATA device * * Given various information provided in struct scsi_cmnd, * map that onto an ATA bus, and using that mapping * determine which ata_device is associated with the * SCSI command to be sent. * * LOCKING: * spin_lock_irqsave(host_set lock) * * RETURNS: * Associated ATA device, or %NULL if not found. */ static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev) { struct ata_device *dev; /* skip commands not addressed to targets we simulate */ if (likely(scsidev->id < ATA_MAX_DEVICES)) dev = &ap->device[scsidev->id]; else return NULL; if (unlikely((scsidev->channel != 0) || (scsidev->lun != 0))) return NULL; if (unlikely(!ata_dev_present(dev))) return NULL; if (!atapi_enabled) { if (unlikely(dev->class == ATA_DEV_ATAPI)) return NULL; } return dev; } /** * ata_get_xlat_func - check if SCSI to ATA translation is possible * @dev: ATA device * @cmd: SCSI command opcode to consider * * Look up the SCSI command given, and determine whether the * SCSI command is to be translated or simulated. * * RETURNS: * Pointer to translation function if possible, %NULL if not. */ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) { switch (cmd) { case READ_6: case READ_10: case READ_16: case WRITE_6: case WRITE_10: case WRITE_16: return ata_scsi_rw_xlat; case SYNCHRONIZE_CACHE: if (ata_try_flush_cache(dev)) return ata_scsi_flush_xlat; break; case VERIFY: case VERIFY_16: return ata_scsi_verify_xlat; case START_STOP: return ata_scsi_start_stop_xlat; } return NULL; } /** * ata_scsi_dump_cdb - dump SCSI command contents to dmesg * @ap: ATA port to which the command was being sent * @cmd: SCSI command to dump * * Prints the contents of a SCSI command via printk(). */ static inline void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd) { #ifdef ATA_DEBUG struct scsi_device *scsidev = cmd->device; u8 *scsicmd = cmd->cmnd; DPRINTK("CDB (%u:%d,%d,%d) %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", ap->id, scsidev->channel, scsidev->id, scsidev->lun, scsicmd[0], scsicmd[1], scsicmd[2], scsicmd[3], scsicmd[4], scsicmd[5], scsicmd[6], scsicmd[7], scsicmd[8]); #endif } /** * ata_scsi_queuecmd - Issue SCSI cdb to libata-managed device * @cmd: SCSI command to be sent * @done: Completion function, called when command is complete * * In some cases, this function translates SCSI commands into * ATA taskfiles, and queues the taskfiles to be sent to * hardware. In other cases, this function simulates a * SCSI device by evaluating and responding to certain * SCSI commands. This creates the overall effect of * ATA and ATAPI devices appearing as SCSI devices. * * LOCKING: * Releases scsi-layer-held lock, and obtains host_set lock. * * RETURNS: * Zero. */ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_port *ap; struct ata_device *dev; struct scsi_device *scsidev = cmd->device; ap = (struct ata_port *) &scsidev->host->hostdata[0]; ata_scsi_dump_cdb(ap, cmd); dev = ata_scsi_find_dev(ap, scsidev); if (unlikely(!dev)) { cmd->result = (DID_BAD_TARGET << 16); done(cmd); goto out_unlock; } if (dev->class == ATA_DEV_ATA) { ata_xlat_func_t xlat_func = ata_get_xlat_func(dev, cmd->cmnd[0]); if (xlat_func) ata_scsi_translate(ap, dev, cmd, done, xlat_func); else ata_scsi_simulate(dev->id, cmd, done); } else ata_scsi_translate(ap, dev, cmd, done, atapi_xlat); out_unlock: return 0; } /** * ata_scsi_simulate - simulate SCSI command on ATA device * @id: current IDENTIFY data for target device. * @cmd: SCSI command being sent to device. * @done: SCSI command completion function. * * Interprets and directly executes a select list of SCSI commands * that can be handled internally. * * LOCKING: * spin_lock_irqsave(host_set lock) */ void ata_scsi_simulate(u16 *id, struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) { struct ata_scsi_args args; u8 *scsicmd = cmd->cmnd; args.id = id; args.cmd = cmd; args.done = done; switch(scsicmd[0]) { /* no-op's, complete with success */ case SYNCHRONIZE_CACHE: case REZERO_UNIT: case SEEK_6: case SEEK_10: case TEST_UNIT_READY: case FORMAT_UNIT: /* FIXME: correct? */ case SEND_DIAGNOSTIC: /* FIXME: correct? */ ata_scsi_rbuf_fill(&args, ata_scsiop_noop); break; case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ ata_bad_cdb(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_00); else if (scsicmd[2] == 0x80) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_80); else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else ata_bad_cdb(cmd, done); break; case MODE_SENSE: case MODE_SENSE_10: ata_scsi_rbuf_fill(&args, ata_scsiop_mode_sense); break; case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ ata_bad_cdb(cmd, done); break; case READ_CAPACITY: ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); break; case SERVICE_ACTION_IN: if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else ata_bad_cdb(cmd, done); break; case REPORT_LUNS: ata_scsi_rbuf_fill(&args, ata_scsiop_report_luns); break; /* mandantory commands we haven't implemented yet */ case REQUEST_SENSE: /* all other commands */ default: ata_bad_scsiop(cmd, done); break; } }