/* * Based on arch/arm/mm/init.c * * Copyright (C) 1995-2005 Russell King * Copyright (C) 2012 ARM Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mm.h" /* * We need to be able to catch inadvertent references to memstart_addr * that occur (potentially in generic code) before arm64_memblock_init() * executes, which assigns it its actual value. So use a default value * that cannot be mistaken for a real physical address. */ s64 memstart_addr __read_mostly = -1; phys_addr_t arm64_dma_phys_limit __read_mostly; #ifdef CONFIG_BLK_DEV_INITRD static int __init early_initrd(char *p) { unsigned long start, size; char *endp; start = memparse(p, &endp); if (*endp == ',') { size = memparse(endp + 1, NULL); initrd_start = start; initrd_end = start + size; } return 0; } early_param("initrd", early_initrd); #endif /* * Return the maximum physical address for ZONE_DMA (DMA_BIT_MASK(32)). It * currently assumes that for memory starting above 4G, 32-bit devices will * use a DMA offset. */ static phys_addr_t __init max_zone_dma_phys(void) { phys_addr_t offset = memblock_start_of_DRAM() & GENMASK_ULL(63, 32); return min(offset + (1ULL << 32), memblock_end_of_DRAM()); } static void __init zone_sizes_init(unsigned long min, unsigned long max) { struct memblock_region *reg; unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES]; unsigned long max_dma = min; memset(zone_size, 0, sizeof(zone_size)); /* 4GB maximum for 32-bit only capable devices */ #ifdef CONFIG_ZONE_DMA max_dma = PFN_DOWN(arm64_dma_phys_limit); zone_size[ZONE_DMA] = max_dma - min; #endif zone_size[ZONE_NORMAL] = max - max_dma; memcpy(zhole_size, zone_size, sizeof(zhole_size)); for_each_memblock(memory, reg) { unsigned long start = memblock_region_memory_base_pfn(reg); unsigned long end = memblock_region_memory_end_pfn(reg); if (start >= max) continue; #ifdef CONFIG_ZONE_DMA if (start < max_dma) { unsigned long dma_end = min(end, max_dma); zhole_size[ZONE_DMA] -= dma_end - start; } #endif if (end > max_dma) { unsigned long normal_end = min(end, max); unsigned long normal_start = max(start, max_dma); zhole_size[ZONE_NORMAL] -= normal_end - normal_start; } } free_area_init_node(0, zone_size, min, zhole_size); } #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_map_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); #endif #ifndef CONFIG_SPARSEMEM static void __init arm64_memory_present(void) { } #else static void __init arm64_memory_present(void) { struct memblock_region *reg; for_each_memblock(memory, reg) memory_present(0, memblock_region_memory_base_pfn(reg), memblock_region_memory_end_pfn(reg)); } #endif static phys_addr_t memory_limit = (phys_addr_t)ULLONG_MAX; /* * Limit the memory size that was specified via FDT. */ static int __init early_mem(char *p) { if (!p) return 1; memory_limit = memparse(p, &p) & PAGE_MASK; pr_notice("Memory limited to %lldMB\n", memory_limit >> 20); return 0; } early_param("mem", early_mem); void __init arm64_memblock_init(void) { const s64 linear_region_size = -(s64)PAGE_OFFSET; /* * Ensure that the linear region takes up exactly half of the kernel * virtual address space. This way, we can distinguish a linear address * from a kernel/module/vmalloc address by testing a single bit. */ BUILD_BUG_ON(linear_region_size != BIT(VA_BITS - 1)); /* * Select a suitable value for the base of physical memory. */ memstart_addr = round_down(memblock_start_of_DRAM(), ARM64_MEMSTART_ALIGN); /* * Remove the memory that we will not be able to cover with the * linear mapping. Take care not to clip the kernel which may be * high in memory. */ memblock_remove(max_t(u64, memstart_addr + linear_region_size, __pa(_end)), ULLONG_MAX); if (memstart_addr + linear_region_size < memblock_end_of_DRAM()) { /* ensure that memstart_addr remains sufficiently aligned */ memstart_addr = round_up(memblock_end_of_DRAM() - linear_region_size, ARM64_MEMSTART_ALIGN); memblock_remove(0, memstart_addr); } /* * Apply the memory limit if it was set. Since the kernel may be loaded * high up in memory, add back the kernel region that must be accessible * via the linear mapping. */ if (memory_limit != (phys_addr_t)ULLONG_MAX) { memblock_enforce_memory_limit(memory_limit); memblock_add(__pa(_text), (u64)(_end - _text)); } if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && initrd_start) { /* * Add back the memory we just removed if it results in the * initrd to become inaccessible via the linear mapping. * Otherwise, this is a no-op */ u64 base = initrd_start & PAGE_MASK; u64 size = PAGE_ALIGN(initrd_end) - base; /* * We can only add back the initrd memory if we don't end up * with more memory than we can address via the linear mapping. * It is up to the bootloader to position the kernel and the * initrd reasonably close to each other (i.e., within 32 GB of * each other) so that all granule/#levels combinations can * always access both. */ if (WARN(base < memblock_start_of_DRAM() || base + size > memblock_start_of_DRAM() + linear_region_size, "initrd not fully accessible via the linear mapping -- please check your bootloader ...\n")) { initrd_start = 0; } else { memblock_remove(base, size); /* clear MEMBLOCK_ flags */ memblock_add(base, size); memblock_reserve(base, size); } } if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) { extern u16 memstart_offset_seed; u64 range = linear_region_size - (memblock_end_of_DRAM() - memblock_start_of_DRAM()); /* * If the size of the linear region exceeds, by a sufficient * margin, the size of the region that the available physical * memory spans, randomize the linear region as well. */ if (memstart_offset_seed > 0 && range >= ARM64_MEMSTART_ALIGN) { range = range / ARM64_MEMSTART_ALIGN + 1; memstart_addr -= ARM64_MEMSTART_ALIGN * ((range * memstart_offset_seed) >> 16); } } /* * Register the kernel text, kernel data, initrd, and initial * pagetables with memblock. */ memblock_reserve(__pa(_text), _end - _text); #ifdef CONFIG_BLK_DEV_INITRD if (initrd_start) { memblock_reserve(initrd_start, initrd_end - initrd_start); /* the generic initrd code expects virtual addresses */ initrd_start = __phys_to_virt(initrd_start); initrd_end = __phys_to_virt(initrd_end); } #endif early_init_fdt_scan_reserved_mem(); /* 4GB maximum for 32-bit only capable devices */ if (IS_ENABLED(CONFIG_ZONE_DMA)) arm64_dma_phys_limit = max_zone_dma_phys(); else arm64_dma_phys_limit = PHYS_MASK + 1; dma_contiguous_reserve(arm64_dma_phys_limit); memblock_allow_resize(); memblock_dump_all(); } void __init bootmem_init(void) { unsigned long min, max; min = PFN_UP(memblock_start_of_DRAM()); max = PFN_DOWN(memblock_end_of_DRAM()); early_memtest(min << PAGE_SHIFT, max << PAGE_SHIFT); /* * Sparsemem tries to allocate bootmem in memory_present(), so must be * done after the fixed reservations. */ arm64_memory_present(); sparse_init(); zone_sizes_init(min, max); high_memory = __va((max << PAGE_SHIFT) - 1) + 1; max_pfn = max_low_pfn = max; } #ifndef CONFIG_SPARSEMEM_VMEMMAP static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) { struct page *start_pg, *end_pg; unsigned long pg, pgend; /* * Convert start_pfn/end_pfn to a struct page pointer. */ start_pg = pfn_to_page(start_pfn - 1) + 1; end_pg = pfn_to_page(end_pfn - 1) + 1; /* * Convert to physical addresses, and round start upwards and end * downwards. */ pg = (unsigned long)PAGE_ALIGN(__pa(start_pg)); pgend = (unsigned long)__pa(end_pg) & PAGE_MASK; /* * If there are free pages between these, free the section of the * memmap array. */ if (pg < pgend) free_bootmem(pg, pgend - pg); } /* * The mem_map array can get very big. Free the unused area of the memory map. */ static void __init free_unused_memmap(void) { unsigned long start, prev_end = 0; struct memblock_region *reg; for_each_memblock(memory, reg) { start = __phys_to_pfn(reg->base); #ifdef CONFIG_SPARSEMEM /* * Take care not to free memmap entries that don't exist due * to SPARSEMEM sections which aren't present. */ start = min(start, ALIGN(prev_end, PAGES_PER_SECTION)); #endif /* * If we had a previous bank, and there is a space between the * current bank and the previous, free it. */ if (prev_end && prev_end < start) free_memmap(prev_end, start); /* * Align up here since the VM subsystem insists that the * memmap entries are valid from the bank end aligned to * MAX_ORDER_NR_PAGES. */ prev_end = ALIGN(__phys_to_pfn(reg->base + reg->size), MAX_ORDER_NR_PAGES); } #ifdef CONFIG_SPARSEMEM if (!IS_ALIGNED(prev_end, PAGES_PER_SECTION)) free_memmap(prev_end, ALIGN(prev_end, PAGES_PER_SECTION)); #endif } #endif /* !CONFIG_SPARSEMEM_VMEMMAP */ /* * mem_init() marks the free areas in the mem_map and tells us how much memory * is free. This is done after various parts of the system have claimed their * memory after the kernel image. */ void __init mem_init(void) { swiotlb_init(1); set_max_mapnr(pfn_to_page(max_pfn) - mem_map); #ifndef CONFIG_SPARSEMEM_VMEMMAP free_unused_memmap(); #endif /* this will put all unused low memory onto the freelists */ free_all_bootmem(); mem_init_print_info(NULL); #define MLK(b, t) b, t, ((t) - (b)) >> 10 #define MLM(b, t) b, t, ((t) - (b)) >> 20 #define MLG(b, t) b, t, ((t) - (b)) >> 30 #define MLK_ROUNDUP(b, t) b, t, DIV_ROUND_UP(((t) - (b)), SZ_1K) pr_notice("Virtual kernel memory layout:\n"); #ifdef CONFIG_KASAN pr_cont(" kasan : 0x%16lx - 0x%16lx (%6ld GB)\n", MLG(KASAN_SHADOW_START, KASAN_SHADOW_END)); #endif pr_cont(" modules : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(MODULES_VADDR, MODULES_END)); pr_cont(" vmalloc : 0x%16lx - 0x%16lx (%6ld GB)\n", MLG(VMALLOC_START, VMALLOC_END)); pr_cont(" .text : 0x%p" " - 0x%p" " (%6ld KB)\n" " .rodata : 0x%p" " - 0x%p" " (%6ld KB)\n" " .init : 0x%p" " - 0x%p" " (%6ld KB)\n" " .data : 0x%p" " - 0x%p" " (%6ld KB)\n", MLK_ROUNDUP(_text, __start_rodata), MLK_ROUNDUP(__start_rodata, _etext), MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_sdata, _edata)); #ifdef CONFIG_SPARSEMEM_VMEMMAP pr_cont(" vmemmap : 0x%16lx - 0x%16lx (%6ld GB maximum)\n" " 0x%16lx - 0x%16lx (%6ld MB actual)\n", MLG(VMEMMAP_START, VMEMMAP_START + VMEMMAP_SIZE), MLM((unsigned long)phys_to_page(memblock_start_of_DRAM()), (unsigned long)virt_to_page(high_memory))); #endif pr_cont(" fixed : 0x%16lx - 0x%16lx (%6ld KB)\n", MLK(FIXADDR_START, FIXADDR_TOP)); pr_cont(" PCI I/O : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(PCI_IO_START, PCI_IO_END)); pr_cont(" memory : 0x%16lx - 0x%16lx (%6ld MB)\n", MLM(__phys_to_virt(memblock_start_of_DRAM()), (unsigned long)high_memory)); #undef MLK #undef MLM #undef MLK_ROUNDUP /* * Check boundaries twice: Some fundamental inconsistencies can be * detected at build time already. */ #ifdef CONFIG_COMPAT BUILD_BUG_ON(TASK_SIZE_32 > TASK_SIZE_64); #endif if (PAGE_SIZE >= 16384 && get_num_physpages() <= 128) { extern int sysctl_overcommit_memory; /* * On a machine this small we won't get anywhere without * overcommit, so turn it on by default. */ sysctl_overcommit_memory = OVERCOMMIT_ALWAYS; } } void free_initmem(void) { free_initmem_default(0); fixup_init(); } #ifdef CONFIG_BLK_DEV_INITRD static int keep_initrd __initdata; void __init free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) free_reserved_area((void *)start, (void *)end, 0, "initrd"); } static int __init keepinitrd_setup(char *__unused) { keep_initrd = 1; return 1; } __setup("keepinitrd", keepinitrd_setup); #endif /* * Dump out memory limit information on panic. */ static int dump_mem_limit(struct notifier_block *self, unsigned long v, void *p) { if (memory_limit != (phys_addr_t)ULLONG_MAX) { pr_emerg("Memory Limit: %llu MB\n", memory_limit >> 20); } else { pr_emerg("Memory Limit: none\n"); } return 0; } static struct notifier_block mem_limit_notifier = { .notifier_call = dump_mem_limit, }; static int __init register_mem_limit_dumper(void) { atomic_notifier_chain_register(&panic_notifier_list, &mem_limit_notifier); return 0; } __initcall(register_mem_limit_dumper);