/* * Copyright (C) 1991, 1992 Linus Torvalds * * Added support for a Unix98-style ptmx device. * -- C. Scott Ananian , 14-Jan-1998 * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_UNIX98_PTYS static struct tty_driver *ptm_driver; static struct tty_driver *pts_driver; static DEFINE_MUTEX(devpts_mutex); #endif static void pty_close(struct tty_struct *tty, struct file *filp) { BUG_ON(!tty); if (tty->driver->subtype == PTY_TYPE_MASTER) WARN_ON(tty->count > 1); else { if (tty->count > 2) return; } wake_up_interruptible(&tty->read_wait); wake_up_interruptible(&tty->write_wait); tty->packet = 0; /* Review - krefs on tty_link ?? */ if (!tty->link) return; tty->link->packet = 0; set_bit(TTY_OTHER_CLOSED, &tty->link->flags); wake_up_interruptible(&tty->link->read_wait); wake_up_interruptible(&tty->link->write_wait); if (tty->driver->subtype == PTY_TYPE_MASTER) { set_bit(TTY_OTHER_CLOSED, &tty->flags); #ifdef CONFIG_UNIX98_PTYS if (tty->driver == ptm_driver) { mutex_lock(&devpts_mutex); devpts_pty_kill(tty->link->driver_data); mutex_unlock(&devpts_mutex); } #endif tty_unlock(tty); tty_vhangup(tty->link); tty_lock(tty); } } /* * The unthrottle routine is called by the line discipline to signal * that it can receive more characters. For PTY's, the TTY_THROTTLED * flag is always set, to force the line discipline to always call the * unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE * characters in the queue. This is necessary since each time this * happens, we need to wake up any sleeping processes that could be * (1) trying to send data to the pty, or (2) waiting in wait_until_sent() * for the pty buffer to be drained. */ static void pty_unthrottle(struct tty_struct *tty) { tty_wakeup(tty->link); set_bit(TTY_THROTTLED, &tty->flags); } /** * pty_space - report space left for writing * @to: tty we are writing into * * The tty buffers allow 64K but we sneak a peak and clip at 8K this * allows a lot of overspill room for echo and other fun messes to * be handled properly */ static int pty_space(struct tty_struct *to) { int n = 8192 - to->buf.memory_used; if (n < 0) return 0; return n; } /** * pty_write - write to a pty * @tty: the tty we write from * @buf: kernel buffer of data * @count: bytes to write * * Our "hardware" write method. Data is coming from the ldisc which * may be in a non sleeping state. We simply throw this at the other * end of the link as if we were an IRQ handler receiving stuff for * the other side of the pty/tty pair. */ static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c) { struct tty_struct *to = tty->link; if (tty->stopped) return 0; if (c > 0) { /* Stuff the data into the input queue of the other end */ c = tty_insert_flip_string(to, buf, c); /* And shovel */ if (c) { tty_flip_buffer_push(to); tty_wakeup(tty); } } return c; } /** * pty_write_room - write space * @tty: tty we are writing from * * Report how many bytes the ldisc can send into the queue for * the other device. */ static int pty_write_room(struct tty_struct *tty) { if (tty->stopped) return 0; return pty_space(tty->link); } /** * pty_chars_in_buffer - characters currently in our tx queue * @tty: our tty * * Report how much we have in the transmit queue. As everything is * instantly at the other end this is easy to implement. */ static int pty_chars_in_buffer(struct tty_struct *tty) { return 0; } /* Set the lock flag on a pty */ static int pty_set_lock(struct tty_struct *tty, int __user *arg) { int val; if (get_user(val, arg)) return -EFAULT; if (val) set_bit(TTY_PTY_LOCK, &tty->flags); else clear_bit(TTY_PTY_LOCK, &tty->flags); return 0; } /* Send a signal to the slave */ static int pty_signal(struct tty_struct *tty, int sig) { unsigned long flags; struct pid *pgrp; if (tty->link) { spin_lock_irqsave(&tty->link->ctrl_lock, flags); pgrp = get_pid(tty->link->pgrp); spin_unlock_irqrestore(&tty->link->ctrl_lock, flags); kill_pgrp(pgrp, sig, 1); put_pid(pgrp); } return 0; } static void pty_flush_buffer(struct tty_struct *tty) { struct tty_struct *to = tty->link; unsigned long flags; if (!to) return; /* tty_buffer_flush(to); FIXME */ if (to->packet) { spin_lock_irqsave(&tty->ctrl_lock, flags); tty->ctrl_status |= TIOCPKT_FLUSHWRITE; wake_up_interruptible(&to->read_wait); spin_unlock_irqrestore(&tty->ctrl_lock, flags); } } static int pty_open(struct tty_struct *tty, struct file *filp) { int retval = -ENODEV; if (!tty || !tty->link) goto out; retval = -EIO; if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) goto out; if (test_bit(TTY_PTY_LOCK, &tty->link->flags)) goto out; if (tty->link->count != 1) goto out; clear_bit(TTY_OTHER_CLOSED, &tty->link->flags); set_bit(TTY_THROTTLED, &tty->flags); retval = 0; out: return retval; } static void pty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { tty->termios.c_cflag &= ~(CSIZE | PARENB); tty->termios.c_cflag |= (CS8 | CREAD); } /** * pty_do_resize - resize event * @tty: tty being resized * @ws: window size being set. * * Update the termios variables and send the necessary signals to * peform a terminal resize correctly */ int pty_resize(struct tty_struct *tty, struct winsize *ws) { struct pid *pgrp, *rpgrp; unsigned long flags; struct tty_struct *pty = tty->link; /* For a PTY we need to lock the tty side */ mutex_lock(&tty->termios_mutex); if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; /* Get the PID values and reference them so we can avoid holding the tty ctrl lock while sending signals. We need to lock these individually however. */ spin_lock_irqsave(&tty->ctrl_lock, flags); pgrp = get_pid(tty->pgrp); spin_unlock_irqrestore(&tty->ctrl_lock, flags); spin_lock_irqsave(&pty->ctrl_lock, flags); rpgrp = get_pid(pty->pgrp); spin_unlock_irqrestore(&pty->ctrl_lock, flags); if (pgrp) kill_pgrp(pgrp, SIGWINCH, 1); if (rpgrp != pgrp && rpgrp) kill_pgrp(rpgrp, SIGWINCH, 1); put_pid(pgrp); put_pid(rpgrp); tty->winsize = *ws; pty->winsize = *ws; /* Never used so will go away soon */ done: mutex_unlock(&tty->termios_mutex); return 0; } /** * pty_common_install - set up the pty pair * @driver: the pty driver * @tty: the tty being instantiated * @bool: legacy, true if this is BSD style * * Perform the initial set up for the tty/pty pair. Called from the * tty layer when the port is first opened. * * Locking: the caller must hold the tty_mutex */ static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty, bool legacy) { struct tty_struct *o_tty; struct tty_port *ports[2]; int idx = tty->index; int retval = -ENOMEM; o_tty = alloc_tty_struct(); if (!o_tty) goto err; ports[0] = kmalloc(sizeof **ports, GFP_KERNEL); ports[1] = kmalloc(sizeof **ports, GFP_KERNEL); if (!ports[0] || !ports[1]) goto err_free_tty; if (!try_module_get(driver->other->owner)) { /* This cannot in fact currently happen */ goto err_free_tty; } initialize_tty_struct(o_tty, driver->other, idx); if (legacy) { /* We always use new tty termios data so we can do this the easy way .. */ retval = tty_init_termios(tty); if (retval) goto err_deinit_tty; retval = tty_init_termios(o_tty); if (retval) goto err_free_termios; driver->other->ttys[idx] = o_tty; driver->ttys[idx] = tty; } else { memset(&tty->termios_locked, 0, sizeof(tty->termios_locked)); tty->termios = driver->init_termios; memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked)); o_tty->termios = driver->other->init_termios; } /* * Everything allocated ... set up the o_tty structure. */ tty_driver_kref_get(driver->other); if (driver->subtype == PTY_TYPE_MASTER) o_tty->count++; /* Establish the links in both directions */ tty->link = o_tty; o_tty->link = tty; tty_port_init(ports[0]); tty_port_init(ports[1]); o_tty->port = ports[0]; tty->port = ports[1]; o_tty->port->itty = o_tty; tty_driver_kref_get(driver); tty->count++; return 0; err_free_termios: if (legacy) tty_free_termios(tty); err_deinit_tty: deinitialize_tty_struct(o_tty); module_put(o_tty->driver->owner); err_free_tty: kfree(ports[0]); kfree(ports[1]); free_tty_struct(o_tty); err: return retval; } /* this is called once with whichever end is closed last */ static void pty_unix98_shutdown(struct tty_struct *tty) { devpts_kill_index(tty->driver_data, tty->index); } static void pty_cleanup(struct tty_struct *tty) { tty->port->itty = NULL; kfree(tty->port); } /* Traditional BSD devices */ #ifdef CONFIG_LEGACY_PTYS static int pty_install(struct tty_driver *driver, struct tty_struct *tty) { return pty_common_install(driver, tty, true); } static void pty_remove(struct tty_driver *driver, struct tty_struct *tty) { struct tty_struct *pair = tty->link; driver->ttys[tty->index] = NULL; if (pair) pair->driver->ttys[pair->index] = NULL; } static int pty_bsd_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *) arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; } static int legacy_count = CONFIG_LEGACY_PTY_COUNT; module_param(legacy_count, int, 0); /* * The master side of a pty can do TIOCSPTLCK and thus * has pty_bsd_ioctl. */ static const struct tty_operations master_pty_ops_bsd = { .install = pty_install, .open = pty_open, .close = pty_close, .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_bsd_ioctl, .cleanup = pty_cleanup, .resize = pty_resize, .remove = pty_remove }; static const struct tty_operations slave_pty_ops_bsd = { .install = pty_install, .open = pty_open, .close = pty_close, .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .cleanup = pty_cleanup, .resize = pty_resize, .remove = pty_remove }; static void __init legacy_pty_init(void) { struct tty_driver *pty_driver, *pty_slave_driver; if (legacy_count <= 0) return; pty_driver = tty_alloc_driver(legacy_count, TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_ALLOC); if (IS_ERR(pty_driver)) panic("Couldn't allocate pty driver"); pty_slave_driver = tty_alloc_driver(legacy_count, TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_ALLOC); if (IS_ERR(pty_slave_driver)) panic("Couldn't allocate pty slave driver"); pty_driver->driver_name = "pty_master"; pty_driver->name = "pty"; pty_driver->major = PTY_MASTER_MAJOR; pty_driver->minor_start = 0; pty_driver->type = TTY_DRIVER_TYPE_PTY; pty_driver->subtype = PTY_TYPE_MASTER; pty_driver->init_termios = tty_std_termios; pty_driver->init_termios.c_iflag = 0; pty_driver->init_termios.c_oflag = 0; pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; pty_driver->init_termios.c_lflag = 0; pty_driver->init_termios.c_ispeed = 38400; pty_driver->init_termios.c_ospeed = 38400; pty_driver->other = pty_slave_driver; tty_set_operations(pty_driver, &master_pty_ops_bsd); pty_slave_driver->driver_name = "pty_slave"; pty_slave_driver->name = "ttyp"; pty_slave_driver->major = PTY_SLAVE_MAJOR; pty_slave_driver->minor_start = 0; pty_slave_driver->type = TTY_DRIVER_TYPE_PTY; pty_slave_driver->subtype = PTY_TYPE_SLAVE; pty_slave_driver->init_termios = tty_std_termios; pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; pty_slave_driver->init_termios.c_ispeed = 38400; pty_slave_driver->init_termios.c_ospeed = 38400; pty_slave_driver->other = pty_driver; tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd); if (tty_register_driver(pty_driver)) panic("Couldn't register pty driver"); if (tty_register_driver(pty_slave_driver)) panic("Couldn't register pty slave driver"); } #else static inline void legacy_pty_init(void) { } #endif /* Unix98 devices */ #ifdef CONFIG_UNIX98_PTYS static struct cdev ptmx_cdev; static int pty_unix98_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { switch (cmd) { case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */ return pty_set_lock(tty, (int __user *)arg); case TIOCGPTN: /* Get PT Number */ return put_user(tty->index, (unsigned int __user *)arg); case TIOCSIG: /* Send signal to other side of pty */ return pty_signal(tty, (int) arg); } return -ENOIOCTLCMD; } /** * ptm_unix98_lookup - find a pty master * @driver: ptm driver * @idx: tty index * * Look up a pty master device. Called under the tty_mutex for now. * This provides our locking. */ static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver, struct inode *ptm_inode, int idx) { /* Master must be open via /dev/ptmx */ return ERR_PTR(-EIO); } /** * pts_unix98_lookup - find a pty slave * @driver: pts driver * @idx: tty index * * Look up a pty master device. Called under the tty_mutex for now. * This provides our locking for the tty pointer. */ static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver, struct inode *pts_inode, int idx) { struct tty_struct *tty; mutex_lock(&devpts_mutex); tty = devpts_get_priv(pts_inode); mutex_unlock(&devpts_mutex); /* Master must be open before slave */ if (!tty) return ERR_PTR(-EIO); return tty; } /* We have no need to install and remove our tty objects as devpts does all the work for us */ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) { return pty_common_install(driver, tty, false); } static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { } static const struct tty_operations ptm_unix98_ops = { .lookup = ptm_unix98_lookup, .install = pty_unix98_install, .remove = pty_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .ioctl = pty_unix98_ioctl, .resize = pty_resize, .shutdown = pty_unix98_shutdown, .cleanup = pty_cleanup }; static const struct tty_operations pty_unix98_ops = { .lookup = pts_unix98_lookup, .install = pty_unix98_install, .remove = pty_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, .write_room = pty_write_room, .flush_buffer = pty_flush_buffer, .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, .shutdown = pty_unix98_shutdown, .cleanup = pty_cleanup, }; /** * ptmx_open - open a unix 98 pty master * @inode: inode of device file * @filp: file pointer to tty * * Allocate a unix98 pty master device from the ptmx driver. * * Locking: tty_mutex protects the init_dev work. tty->count should * protect the rest. * allocated_ptys_lock handles the list of free pty numbers */ static int ptmx_open(struct inode *inode, struct file *filp) { struct tty_struct *tty; struct inode *slave_inode; int retval; int index; nonseekable_open(inode, filp); retval = tty_alloc_file(filp); if (retval) return retval; /* find a device that is not in use. */ mutex_lock(&devpts_mutex); index = devpts_new_index(inode); if (index < 0) { retval = index; mutex_unlock(&devpts_mutex); goto err_file; } mutex_unlock(&devpts_mutex); mutex_lock(&tty_mutex); tty = tty_init_dev(ptm_driver, index); if (IS_ERR(tty)) { retval = PTR_ERR(tty); goto out; } /* The tty returned here is locked so we can safely drop the mutex */ mutex_unlock(&tty_mutex); set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ tty_add_file(tty, filp); slave_inode = devpts_pty_new(inode, MKDEV(UNIX98_PTY_SLAVE_MAJOR, index), index, tty->link); if (IS_ERR(slave_inode)) { retval = PTR_ERR(slave_inode); goto err_release; } retval = ptm_driver->ops->open(tty, filp); if (retval) goto err_release; tty_unlock(tty); tty->driver_data = inode; tty->link->driver_data = slave_inode; return 0; err_release: tty_unlock(tty); tty_release(inode, filp); return retval; out: mutex_unlock(&tty_mutex); devpts_kill_index(inode, index); err_file: tty_free_file(filp); return retval; } static struct file_operations ptmx_fops; static void __init unix98_pty_init(void) { ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM | TTY_DRIVER_DYNAMIC_ALLOC); if (IS_ERR(ptm_driver)) panic("Couldn't allocate Unix98 ptm driver"); pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX, TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_DEVPTS_MEM | TTY_DRIVER_DYNAMIC_ALLOC); if (IS_ERR(pts_driver)) panic("Couldn't allocate Unix98 pts driver"); ptm_driver->driver_name = "pty_master"; ptm_driver->name = "ptm"; ptm_driver->major = UNIX98_PTY_MASTER_MAJOR; ptm_driver->minor_start = 0; ptm_driver->type = TTY_DRIVER_TYPE_PTY; ptm_driver->subtype = PTY_TYPE_MASTER; ptm_driver->init_termios = tty_std_termios; ptm_driver->init_termios.c_iflag = 0; ptm_driver->init_termios.c_oflag = 0; ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; ptm_driver->init_termios.c_lflag = 0; ptm_driver->init_termios.c_ispeed = 38400; ptm_driver->init_termios.c_ospeed = 38400; ptm_driver->other = pts_driver; tty_set_operations(ptm_driver, &ptm_unix98_ops); pts_driver->driver_name = "pty_slave"; pts_driver->name = "pts"; pts_driver->major = UNIX98_PTY_SLAVE_MAJOR; pts_driver->minor_start = 0; pts_driver->type = TTY_DRIVER_TYPE_PTY; pts_driver->subtype = PTY_TYPE_SLAVE; pts_driver->init_termios = tty_std_termios; pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; pts_driver->init_termios.c_ispeed = 38400; pts_driver->init_termios.c_ospeed = 38400; pts_driver->other = ptm_driver; tty_set_operations(pts_driver, &pty_unix98_ops); if (tty_register_driver(ptm_driver)) panic("Couldn't register Unix98 ptm driver"); if (tty_register_driver(pts_driver)) panic("Couldn't register Unix98 pts driver"); /* Now create the /dev/ptmx special device */ tty_default_fops(&ptmx_fops); ptmx_fops.open = ptmx_open; cdev_init(&ptmx_cdev, &ptmx_fops); if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) panic("Couldn't register /dev/ptmx driver\n"); device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); } #else static inline void unix98_pty_init(void) { } #endif static int __init pty_init(void) { legacy_pty_init(); unix98_pty_init(); return 0; } module_init(pty_init);