/* * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include "skeleton.dtsi" / { compatible = "ti,omap4430", "ti,omap4"; interrupt-parent = <&gic>; aliases { i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; i2c3 = &i2c4; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&L2>; reg = <0x0>; clocks = <&dpll_mpu_ck>; clock-names = "cpu"; clock-latency = <300000>; /* From omap-cpufreq driver */ }; cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; next-level-cache = <&L2>; reg = <0x1>; }; }; gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller; #interrupt-cells = <3>; reg = <0x48241000 0x1000>, <0x48240100 0x0100>; }; L2: l2-cache-controller@48242000 { compatible = "arm,pl310-cache"; reg = <0x48242000 0x1000>; cache-unified; cache-level = <2>; }; local-timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; clocks = <&mpu_periphclk>; reg = <0x48240600 0x20>; interrupts = ; }; /* * The soc node represents the soc top level view. It is used for IPs * that are not memory mapped in the MPU view or for the MPU itself. */ soc { compatible = "ti,omap-infra"; mpu { compatible = "ti,omap4-mpu"; ti,hwmods = "mpu"; }; dsp { compatible = "ti,omap3-c64"; ti,hwmods = "dsp"; }; iva { compatible = "ti,ivahd"; ti,hwmods = "iva"; }; }; /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. * Since it will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. */ ocp { compatible = "ti,omap4-l3-noc", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; reg = <0x44000000 0x1000>, <0x44800000 0x2000>, <0x45000000 0x1000>; interrupts = , ; cm1: cm1@4a004000 { compatible = "ti,omap4-cm1"; reg = <0x4a004000 0x2000>; cm1_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; cm1_clockdomains: clockdomains { }; }; prm: prm@4a306000 { compatible = "ti,omap4-prm"; reg = <0x4a306000 0x3000>; interrupts = ; prm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; prm_clockdomains: clockdomains { }; }; cm2: cm2@4a008000 { compatible = "ti,omap4-cm2"; reg = <0x4a008000 0x3000>; cm2_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; cm2_clockdomains: clockdomains { }; }; scrm: scrm@4a30a000 { compatible = "ti,omap4-scrm"; reg = <0x4a30a000 0x2000>; scrm_clocks: clocks { #address-cells = <1>; #size-cells = <0>; }; scrm_clockdomains: clockdomains { }; }; counter32k: counter@4a304000 { compatible = "ti,omap-counter32k"; reg = <0x4a304000 0x20>; ti,hwmods = "counter_32k"; }; omap4_pmx_core: pinmux@4a100040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a100040 0x0196>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap4_pmx_wkup: pinmux@4a31e040 { compatible = "ti,omap4-padconf", "pinctrl-single"; reg = <0x4a31e040 0x0038>; #address-cells = <1>; #size-cells = <0>; #interrupt-cells = <1>; interrupt-controller; pinctrl-single,register-width = <16>; pinctrl-single,function-mask = <0x7fff>; }; omap4_padconf_global: tisyscon@4a1005a0 { compatible = "syscon"; reg = <0x4a1005a0 0x170>; }; pbias_regulator: pbias_regulator { compatible = "ti,pbias-omap"; reg = <0x60 0x4>; syscon = <&omap4_padconf_global>; pbias_mmc_reg: pbias_mmc_omap4 { regulator-name = "pbias_mmc_omap4"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; }; ocmcram: ocmcram@40304000 { compatible = "mmio-sram"; reg = <0x40304000 0xa000>; /* 40k */ }; sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; interrupts = , , , ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; }; gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; reg = <0x4a310000 0x200>; interrupts = ; ti,hwmods = "gpio1"; ti,gpio-always-on; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; gpmc: gpmc@50000000 { compatible = "ti,omap4430-gpmc"; reg = <0x50000000 0x1000>; #address-cells = <2>; #size-cells = <1>; interrupts = ; gpmc,num-cs = <8>; gpmc,num-waitpins = <4>; ti,hwmods = "gpmc"; ti,no-idle-on-init; clocks = <&l3_div_ck>; clock-names = "fck"; }; uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; interrupts-extended = <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; hwspinlock: spinlock@4a0f6000 { compatible = "ti,omap4-hwspinlock"; reg = <0x4a0f6000 0x1000>; ti,hwmods = "spinlock"; #hwlock-cells = <1>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; }; i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; }; i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; }; i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; reg = <0x48350000 0x100>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; }; mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; dmas = <&sdma 35>, <&sdma 36>, <&sdma 37>, <&sdma 38>, <&sdma 39>, <&sdma 40>, <&sdma 41>, <&sdma 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; }; mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; dmas = <&sdma 43>, <&sdma 44>, <&sdma 45>, <&sdma 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; }; mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; dmas = <&sdma 15>, <&sdma 16>; dma-names = "tx0", "rx0"; }; mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; dmas = <&sdma 70>, <&sdma 71>; dma-names = "tx0", "rx0"; }; mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; dmas = <&sdma 61>, <&sdma 62>; dma-names = "tx", "rx"; pbias-supply = <&pbias_mmc_reg>; }; mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; dma-names = "tx", "rx"; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; dma-names = "tx", "rx"; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; dma-names = "tx", "rx"; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d5000 0x400>; interrupts = ; ti,hwmods = "mmc5"; ti,needs-special-reset; dmas = <&sdma 59>, <&sdma 60>; dma-names = "tx", "rx"; }; mmu_dsp: mmu@4a066000 { compatible = "ti,omap4-iommu"; reg = <0x4a066000 0x100>; interrupts = ; ti,hwmods = "mmu_dsp"; }; mmu_ipu: mmu@55082000 { compatible = "ti,omap4-iommu"; reg = <0x55082000 0x100>; interrupts = ; ti,hwmods = "mmu_ipu"; ti,iommu-bus-err-back; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; reg = <0x4a314000 0x80>; interrupts = ; ti,hwmods = "wd_timer2"; }; mcpdm: mcpdm@40132000 { compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = ; ti,hwmods = "mcpdm"; dmas = <&sdma 65>, <&sdma 66>; dma-names = "up_link", "dn_link"; status = "disabled"; }; dmic: dmic@4012e000 { compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = ; ti,hwmods = "dmic"; dmas = <&sdma 67>; dma-names = "up_link"; status = "disabled"; }; mcbsp1: mcbsp@40122000 { compatible = "ti,omap4-mcbsp"; reg = <0x40122000 0xff>, /* MPU private access */ <0x49022000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp1"; dmas = <&sdma 33>, <&sdma 34>; dma-names = "tx", "rx"; status = "disabled"; }; mcbsp2: mcbsp@40124000 { compatible = "ti,omap4-mcbsp"; reg = <0x40124000 0xff>, /* MPU private access */ <0x49024000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp2"; dmas = <&sdma 17>, <&sdma 18>; dma-names = "tx", "rx"; status = "disabled"; }; mcbsp3: mcbsp@40126000 { compatible = "ti,omap4-mcbsp"; reg = <0x40126000 0xff>, /* MPU private access */ <0x49026000 0xff>; /* L3 Interconnect */ reg-names = "mpu", "dma"; interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp3"; dmas = <&sdma 19>, <&sdma 20>; dma-names = "tx", "rx"; status = "disabled"; }; mcbsp4: mcbsp@48096000 { compatible = "ti,omap4-mcbsp"; reg = <0x48096000 0xff>; /* L4 Interconnect */ reg-names = "mpu"; interrupts = ; interrupt-names = "common"; ti,buffer-size = <128>; ti,hwmods = "mcbsp4"; dmas = <&sdma 31>, <&sdma 32>; dma-names = "tx", "rx"; status = "disabled"; }; keypad: keypad@4a31c000 { compatible = "ti,omap4-keypad"; reg = <0x4a31c000 0x80>; interrupts = ; reg-names = "mpu"; ti,hwmods = "kbd"; }; dmm@4e000000 { compatible = "ti,omap4-dmm"; reg = <0x4e000000 0x800>; interrupts = <0 113 0x4>; ti,hwmods = "dmm"; }; emif1: emif@4c000000 { compatible = "ti,emif-4d"; reg = <0x4c000000 0x100>; interrupts = ; ti,hwmods = "emif1"; ti,no-idle-on-init; phy-type = <1>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; }; emif2: emif@4d000000 { compatible = "ti,emif-4d"; reg = <0x4d000000 0x100>; interrupts = ; ti,hwmods = "emif2"; ti,no-idle-on-init; phy-type = <1>; hw-caps-read-idle-ctrl; hw-caps-ll-interface; hw-caps-temp-alert; }; ocp2scp@4a0ad000 { compatible = "ti,omap-ocp2scp"; reg = <0x4a0ad000 0x1f>; #address-cells = <1>; #size-cells = <1>; ranges; ti,hwmods = "ocp2scp_usb_phy"; usb2_phy: usb2phy@4a0ad080 { compatible = "ti,omap-usb2"; reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb2phy>; clocks = <&usb_phy_cm_clk32k>; clock-names = "wkupclk"; #phy-cells = <0>; }; }; mailbox: mailbox@4a0f4000 { compatible = "ti,omap4-mailbox"; reg = <0x4a0f4000 0x200>; interrupts = ; ti,hwmods = "mailbox"; ti,mbox-num-users = <3>; ti,mbox-num-fifos = <8>; }; timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; timer2: timer@48032000 { compatible = "ti,omap3430-timer"; reg = <0x48032000 0x80>; interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap4430-timer"; reg = <0x48034000 0x80>; interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap4430-timer"; reg = <0x48036000 0x80>; interrupts = ; ti,hwmods = "timer4"; }; timer5: timer@40138000 { compatible = "ti,omap4430-timer"; reg = <0x40138000 0x80>, <0x49038000 0x80>; interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; timer6: timer@4013a000 { compatible = "ti,omap4430-timer"; reg = <0x4013a000 0x80>, <0x4903a000 0x80>; interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; }; timer7: timer@4013c000 { compatible = "ti,omap4430-timer"; reg = <0x4013c000 0x80>, <0x4903c000 0x80>; interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; timer8: timer@4013e000 { compatible = "ti,omap4430-timer"; reg = <0x4013e000 0x80>, <0x4903e000 0x80>; interrupts = ; ti,hwmods = "timer8"; ti,timer-pwm; ti,timer-dsp; }; timer9: timer@4803e000 { compatible = "ti,omap4430-timer"; reg = <0x4803e000 0x80>; interrupts = ; ti,hwmods = "timer9"; ti,timer-pwm; }; timer10: timer@48086000 { compatible = "ti,omap3430-timer"; reg = <0x48086000 0x80>; interrupts = ; ti,hwmods = "timer10"; ti,timer-pwm; }; timer11: timer@48088000 { compatible = "ti,omap4430-timer"; reg = <0x48088000 0x80>; interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; usbhstll: usbhstll@4a062000 { compatible = "ti,usbhs-tll"; reg = <0x4a062000 0x1000>; interrupts = ; ti,hwmods = "usb_tll_hs"; }; usbhshost: usbhshost@4a064000 { compatible = "ti,usbhs-host"; reg = <0x4a064000 0x800>; ti,hwmods = "usb_host_hs"; #address-cells = <1>; #size-cells = <1>; ranges; clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>, <&xclk60mhsp2_ck>; clock-names = "refclk_60m_int", "refclk_60m_ext_p1", "refclk_60m_ext_p2"; usbhsohci: ohci@4a064800 { compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; interrupts = ; }; usbhsehci: ehci@4a064c00 { compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; interrupt-parent = <&gic>; interrupts = ; }; }; omap_control_usb2phy: control-phy@4a002300 { compatible = "ti,control-phy-usb2"; reg = <0x4a002300 0x4>; reg-names = "power"; }; omap_control_usbotg: control-phy@4a00233c { compatible = "ti,control-phy-otghs"; reg = <0x4a00233c 0x4>; reg-names = "otghs_control"; }; usb_otg_hs: usb_otg_hs@4a0ab000 { compatible = "ti,omap4-musb"; reg = <0x4a0ab000 0x7ff>; interrupts = , ; interrupt-names = "mc", "dma"; ti,hwmods = "usb_otg_hs"; usb-phy = <&usb2_phy>; phys = <&usb2_phy>; phy-names = "usb2-phy"; multipoint = <1>; num-eps = <16>; ram-bits = <12>; ctrl-module = <&omap_control_usbotg>; }; aes: aes@4b501000 { compatible = "ti,omap4-aes"; ti,hwmods = "aes"; reg = <0x4b501000 0xa0>; interrupts = ; dmas = <&sdma 111>, <&sdma 110>; dma-names = "tx", "rx"; }; des: des@480a5000 { compatible = "ti,omap4-des"; ti,hwmods = "des"; reg = <0x480a5000 0xa0>; interrupts = ; dmas = <&sdma 117>, <&sdma 116>; dma-names = "tx", "rx"; }; abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v2"; regulator-name = "abb_mpu"; #address-cells = <0>; #size-cells = <0>; ti,tranxdone-status-mask = <0x80>; clocks = <&sys_clkin_ck>; ti,settling-time = <50>; ti,clock-cycles = <16>; status = "disabled"; }; abb_iva: regulator-abb-iva { compatible = "ti,abb-v2"; regulator-name = "abb_iva"; #address-cells = <0>; #size-cells = <0>; ti,tranxdone-status-mask = <0x80000000>; clocks = <&sys_clkin_ck>; ti,settling-time = <50>; ti,clock-cycles = <16>; status = "disabled"; }; dss: dss@58000000 { compatible = "ti,omap4-dss"; reg = <0x58000000 0x80>; status = "disabled"; ti,hwmods = "dss_core"; clocks = <&dss_dss_clk>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; ranges; dispc@58001000 { compatible = "ti,omap4-dispc"; reg = <0x58001000 0x1000>; interrupts = ; ti,hwmods = "dss_dispc"; clocks = <&dss_dss_clk>; clock-names = "fck"; }; rfbi: encoder@58002000 { compatible = "ti,omap4-rfbi"; reg = <0x58002000 0x1000>; status = "disabled"; ti,hwmods = "dss_rfbi"; clocks = <&dss_dss_clk>, <&dss_fck>; clock-names = "fck", "ick"; }; venc: encoder@58003000 { compatible = "ti,omap4-venc"; reg = <0x58003000 0x1000>; status = "disabled"; ti,hwmods = "dss_venc"; clocks = <&dss_tv_clk>; clock-names = "fck"; }; dsi1: encoder@58004000 { compatible = "ti,omap4-dsi"; reg = <0x58004000 0x200>, <0x58004200 0x40>, <0x58004300 0x20>; reg-names = "proto", "phy", "pll"; interrupts = ; status = "disabled"; ti,hwmods = "dss_dsi1"; clocks = <&dss_dss_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; }; dsi2: encoder@58005000 { compatible = "ti,omap4-dsi"; reg = <0x58005000 0x200>, <0x58005200 0x40>, <0x58005300 0x20>; reg-names = "proto", "phy", "pll"; interrupts = ; status = "disabled"; ti,hwmods = "dss_dsi2"; clocks = <&dss_dss_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; }; hdmi: encoder@58006000 { compatible = "ti,omap4-hdmi"; reg = <0x58006000 0x200>, <0x58006200 0x100>, <0x58006300 0x100>, <0x58006400 0x1000>; reg-names = "wp", "pll", "phy", "core"; interrupts = ; status = "disabled"; ti,hwmods = "dss_hdmi"; clocks = <&dss_48mhz_clk>, <&dss_sys_clk>; clock-names = "fck", "sys_clk"; dmas = <&sdma 76>; dma-names = "audio_tx"; }; }; }; }; /include/ "omap44xx-clocks.dtsi"