/* * Samsung's Exynos4412 based Trats 2 board device tree source * * Copyright (c) 2013 Samsung Electronics Co., Ltd. * http://www.samsung.com * * Device tree source file for Samsung's Trats 2 board which is based on * Samsung's Exynos4412 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "exynos4412.dtsi" #include #include / { model = "Samsung Trats 2 based on Exynos4412"; compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4"; aliases { i2c9 = &i2c_ak8975; i2c10 = &i2c_cm36651; i2c11 = &i2c_max77693; i2c12 = &i2c_max77693_fuel; }; memory { reg = <0x40000000 0x40000000>; }; chosen { bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; }; firmware@0204F000 { compatible = "samsung,secure-firmware"; reg = <0x0204F000 0x1000>; }; fixed-rate-clocks { xxti { compatible = "samsung,clock-xxti", "fixed-clock"; clock-frequency = <0>; }; xusbxti { compatible = "samsung,clock-xusbxti", "fixed-clock"; clock-frequency = <24000000>; }; }; regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; cam_io_reg: voltage-regulator-1 { compatible = "regulator-fixed"; regulator-name = "CAM_SENSOR_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; gpio = <&gpm0 2 0>; enable-active-high; }; lcd_vdd3_reg: voltage-regulator-2 { compatible = "regulator-fixed"; regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; gpio = <&gpc0 1 0>; enable-active-high; }; cam_af_reg: voltage-regulator-3 { compatible = "regulator-fixed"; regulator-name = "CAM_AF"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; gpio = <&gpm0 4 0>; enable-active-high; }; ps_als_reg: voltage-regulator-5 { compatible = "regulator-fixed"; regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; gpio = <&gpj0 5 0>; enable-active-high; }; }; gpio-keys { compatible = "gpio-keys"; key-down { gpios = <&gpx3 3 1>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { gpios = <&gpx2 2 1>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { gpios = <&gpx2 7 1>; linux,code = <116>; label = "power"; debounce-interval = <10>; gpio-key,wakeup; }; key-ok { gpios = <&gpx0 1 1>; linux,code = <139>; label = "ok"; debounce-inteval = <10>; gpio-key,wakeup; }; }; adc: adc@126C0000 { vdd-supply = <&ldo3_reg>; status = "okay"; }; i2c@13890000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <400000>; pinctrl-0 = <&i2c3_bus>; pinctrl-names = "default"; status = "okay"; mms114-touchscreen@48 { compatible = "melfas,mms114"; reg = <0x48>; interrupt-parent = <&gpm2>; interrupts = <3 2>; x-size = <720>; y-size = <1280>; avdd-supply = <&ldo23_reg>; vdd-supply = <&ldo24_reg>; }; }; i2c_0: i2c@13860000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <400000>; pinctrl-0 = <&i2c0_bus>; pinctrl-names = "default"; status = "okay"; s5c73m3@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ vdd-int-supply = <&buck9_reg>; vddio-cis-supply = <&ldo9_reg>; vdda-supply = <&ldo17_reg>; vddio-host-supply = <&ldo18_reg>; vdd-af-supply = <&cam_af_reg>; vdd-reg-supply = <&cam_io_reg>; clock-frequency = <24000000>; /* CAM_A_CLKOUT */ clocks = <&camera 0>; clock-names = "cis_extclk"; port { s5c73m3_ep: endpoint { remote-endpoint = <&csis0_ep>; data-lanes = <1 2 3 4>; }; }; }; }; i2c@138A0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; pinctrl-0 = <&i2c4_bus>; pinctrl-names = "default"; status = "okay"; wm1811: wm1811@1a { compatible = "wlf,wm1811"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; clock-names = "MCLK1"; DCVDD-supply = <&ldo3_reg>; DBVDD1-supply = <&ldo3_reg>; wlf,ldo1ena = <&gpj0 4 0>; }; }; i2c@138D0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; pinctrl-0 = <&i2c7_bus>; pinctrl-names = "default"; status = "okay"; max77686_pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&gpx0>; interrupts = <7 0>; reg = <0x09>; #clock-cells = <1>; voltage-regulators { ldo1_reg: ldo1 { regulator-compatible = "LDO1"; regulator-name = "VALIVE_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; ldo2_reg: ldo2 { regulator-compatible = "LDO2"; regulator-name = "VM1M2_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo3_reg: ldo3 { regulator-compatible = "LDO3"; regulator-name = "VCC_1.8V_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo4_reg: ldo4 { regulator-compatible = "LDO4"; regulator-name = "VCC_2.8V_AP"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; ldo5_reg: ldo5 { regulator-compatible = "LDO5"; regulator-name = "VCC_1.8V_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; ldo6_reg: ldo6 { regulator-compatible = "LDO6"; regulator-name = "VMPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo7_reg: ldo7 { regulator-compatible = "LDO7"; regulator-name = "VPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; regulator-state-mem { regulator-on-in-suspend; }; }; ldo8_reg: ldo8 { regulator-compatible = "LDO8"; regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo9_reg: ldo9 { regulator-compatible = "LDO9"; regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; ldo10_reg: ldo10 { regulator-compatible = "LDO10"; regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo11_reg: ldo11 { regulator-compatible = "LDO11"; regulator-name = "VABB1_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo12_reg: ldo12 { regulator-compatible = "LDO12"; regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-off-in-suspend; }; }; ldo13_reg: ldo13 { regulator-compatible = "LDO13"; regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo14_reg: ldo14 { regulator-compatible = "LDO14"; regulator-name = "VABB2_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; regulator-always-on; regulator-state-mem { regulator-off-in-suspend; }; }; ldo15_reg: ldo15 { regulator-compatible = "LDO15"; regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-state-mem { regulator-on-in-suspend; }; }; ldo16_reg: ldo16 { regulator-compatible = "LDO16"; regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-state-mem { regulator-on-in-suspend; }; }; ldo17_reg: ldo17 { regulator-compatible = "LDO17"; regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; ldo18_reg: ldo18 { regulator-compatible = "LDO18"; regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo19_reg: ldo19 { regulator-compatible = "LDO19"; regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo20_reg: ldo20 { regulator-compatible = "LDO20"; regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo21_reg: ldo21 { regulator-compatible = "LDO21"; regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; ldo22_reg: ldo22 { regulator-compatible = "LDO22"; regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo23_reg: ldo23 { regulator-compatible = "LDO23"; regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; ldo24_reg: ldo24 { regulator-compatible = "LDO24"; regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; ldo25_reg: ldo25 { regulator-compatible = "LDO25"; regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; ldo26_reg: ldo26 { regulator-compatible = "LDO26"; regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; buck1_reg: buck1 { regulator-compatible = "BUCK1"; regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck2_reg: buck2 { regulator-compatible = "BUCK2"; regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; }; }; buck3_reg: buck3 { regulator-compatible = "BUCK3"; regulator-name = "vdd_int"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck4_reg: buck4 { regulator-compatible = "BUCK4"; regulator-name = "vdd_g3d"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; regulator-boot-on; regulator-state-mem { regulator-off-in-suspend; }; }; buck5_reg: buck5 { regulator-compatible = "BUCK5"; regulator-name = "VMEM_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; buck6_reg: buck6 { regulator-compatible = "BUCK6"; regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; buck7_reg: buck7 { regulator-compatible = "BUCK7"; regulator-name = "VCC_SUB_2.0V"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; buck8_reg: buck8 { regulator-compatible = "BUCK8"; regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; buck9_reg: buck9 { regulator-compatible = "BUCK9"; regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; }; }; }; }; i2c_max77693: i2c-gpio-1 { compatible = "i2c-gpio"; gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; status = "okay"; max77693@66 { compatible = "maxim,max77693"; interrupt-parent = <&gpx1>; interrupts = <5 2>; reg = <0x66>; regulators { esafeout1_reg: ESAFEOUT1@1 { regulator-name = "ESAFEOUT1"; }; esafeout2_reg: ESAFEOUT2@2 { regulator-name = "ESAFEOUT2"; }; charger_reg: CHARGER@0 { regulator-name = "CHARGER"; regulator-min-microamp = <60000>; regulator-max-microamp = <2580000>; }; }; max77693_haptic { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; pwms = <&pwm 0 38022 0>; }; charger { compatible = "maxim,max77693-charger"; maxim,constant-microvolt = <4350000>; maxim,min-system-microvolt = <3600000>; maxim,thermal-regulation-celsius = <100>; maxim,battery-overcurrent-microamp = <3500000>; maxim,charge-input-threshold-microvolt = <4300000>; }; }; }; i2c_max77693_fuel: i2c-gpio-3 { compatible = "i2c-gpio"; gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; status = "okay"; max77693-fuel-gauge@36 { compatible = "maxim,max17047"; interrupt-parent = <&gpx2>; interrupts = <3 IRQ_TYPE_EDGE_FALLING>; reg = <0x36>; }; }; mmc@12550000 { num-slots = <1>; broken-cd; non-removable; card-detect-delay = <200>; vmmc-supply = <&ldo22_reg>; clock-frequency = <400000000>; samsung,dw-mshc-ciu-div = <0>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; pinctrl-names = "default"; status = "okay"; bus-width = <8>; cap-mmc-highspeed; }; sdhci@12530000 { bus-width = <4>; cd-gpios = <&gpx3 4 0>; cd-inverted; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo21_reg>; status = "okay"; }; serial@13800000 { status = "okay"; }; serial@13810000 { status = "okay"; }; serial@13820000 { status = "okay"; }; serial@13830000 { status = "okay"; }; tmu@100C0000 { vtmu-supply = <&ldo10_reg>; status = "okay"; }; i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&gpy2 4 0>, <&gpy2 5 0>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; status = "okay"; ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; }; }; i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; gpios = <&gpf0 0 1>, <&gpf0 1 1>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; cm36651@18 { compatible = "capella,cm36651"; reg = <0x18>; interrupt-parent = <&gpx0>; interrupts = <2 2>; vled-supply = <&ps_als_reg>; }; }; spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; cs-gpios = <&gpb 5 0>; status = "okay"; s5c73m3_spi: s5c73m3 { compatible = "samsung,s5c73m3"; spi-max-frequency = <50000000>; reg = <0>; controller-data { samsung,spi-feedback-delay = <2>; }; }; }; pwm: pwm@139D0000 { pinctrl-0 = <&pwm0_out>; pinctrl-names = "default"; samsung,pwm-outputs = <0>; status = "okay"; }; dsi_0: dsi@11C80000 { vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; samsung,pll-clock-frequency = <24000000>; status = "okay"; ports { #address-cells = <1>; #size-cells = <0>; port@1 { reg = <1>; dsi_out: endpoint { remote-endpoint = <&dsi_in>; samsung,burst-clock-frequency = <500000000>; samsung,esc-clock-frequency = <20000000>; }; }; }; panel@0 { compatible = "samsung,s6e8aa0"; reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; reset-gpios = <&gpy4 5 0>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; flip-horizontal; flip-vertical; panel-width-mm = <58>; panel-height-mm = <103>; display-timings { timing-0 { clock-frequency = <0>; hactive = <720>; vactive = <1280>; hfront-porch = <5>; hback-porch = <5>; hsync-len = <5>; vfront-porch = <13>; vback-porch = <1>; vsync-len = <2>; }; }; port { dsi_in: endpoint { remote-endpoint = <&dsi_out>; }; }; }; }; fimd@11c00000 { status = "okay"; }; camera: camera { pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>; pinctrl-names = "default"; status = "okay"; assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>; assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>; fimc_0: fimc@11800000 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; fimc_1: fimc@11810000 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; fimc_2: fimc@11820000 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; fimc_3: fimc@11830000 { status = "okay"; assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; }; csis_0: csis@11880000 { status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; assigned-clocks = <&clock CLK_MOUT_CSIS0>, <&clock CLK_SCLK_CSIS0>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; /* Camera C (3) MIPI CSI-2 (CSIS0) */ port@3 { reg = <3>; csis0_ep: endpoint { remote-endpoint = <&s5c73m3_ep>; data-lanes = <1 2 3 4>; samsung,csis-hs-settle = <12>; }; }; }; csis_1: csis@11890000 { status = "okay"; vddcore-supply = <&ldo8_reg>; vddio-supply = <&ldo10_reg>; assigned-clocks = <&clock CLK_MOUT_CSIS1>, <&clock CLK_SCLK_CSIS1>; assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>; assigned-clock-rates = <0>, <176000000>; /* Camera D (4) MIPI CSI-2 (CSIS1) */ port@4 { reg = <4>; csis1_ep: endpoint { remote-endpoint = <&is_s5k6a3_ep>; data-lanes = <1>; samsung,csis-hs-settle = <18>; samsung,csis-wclk; }; }; }; fimc_lite_0: fimc-lite@12390000 { status = "okay"; }; fimc_lite_1: fimc-lite@123A0000 { status = "okay"; }; fimc-is@12000000 { pinctrl-0 = <&fimc_is_uart>; pinctrl-names = "default"; status = "okay"; i2c1_isp: i2c-isp@12140000 { pinctrl-0 = <&fimc_is_i2c1>; pinctrl-names = "default"; s5k6a3@10 { compatible = "samsung,s5k6a3"; reg = <0x10>; svdda-supply = <&cam_io_reg>; svddio-supply = <&ldo19_reg>; afvdd-supply = <&ldo19_reg>; clock-frequency = <24000000>; /* CAM_B_CLKOUT */ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; gpios = <&gpm1 6 0>; port { is_s5k6a3_ep: endpoint { remote-endpoint = <&csis1_ep>; data-lanes = <1>; }; }; }; }; }; }; i2s0: i2s@03830000 { pinctrl-0 = <&i2s0_bus>; pinctrl-names = "default"; status = "okay"; }; sound { compatible = "samsung,trats2-audio"; samsung,i2s-controller = <&i2s0>; samsung,model = "Trats2"; samsung,audio-codec = <&wm1811>; samsung,audio-routing = "SPK", "SPKOUTLN", "SPK", "SPKOUTLP", "SPK", "SPKOUTRN", "SPK", "SPKOUTRP"; }; exynos-usbphy@125B0000 { status = "okay"; }; hsotg@12480000 { vusb_d-supply = <&ldo15_reg>; vusb_a-supply = <&ldo12_reg>; dr_mode = "peripheral"; status = "okay"; }; thermistor-ap@0 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 1>; /* AP temperature */ }; thermistor-battery@1 { compatible = "ntc,ncp15wb473"; pullup-uv = <1800000>; /* VCC_1.8V_AP */ pullup-ohm = <100000>; /* 100K */ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; }; &pmu_system_controller { assigned-clocks = <&pmu_system_controller 0>; assigned-clock-parents = <&clock CLK_XUSBXTI>; }; &pinctrl_0 { pinctrl-names = "default"; pinctrl-0 = <&sleep0>; sleep0: sleep-states { PIN_SLP(gpa0-0, INPUT, NONE); PIN_SLP(gpa0-1, OUT0, NONE); PIN_SLP(gpa0-2, INPUT, NONE); PIN_SLP(gpa0-3, INPUT, UP); PIN_SLP(gpa0-4, INPUT, NONE); PIN_SLP(gpa0-5, INPUT, DOWN); PIN_SLP(gpa0-6, INPUT, DOWN); PIN_SLP(gpa0-7, INPUT, UP); PIN_SLP(gpa1-0, INPUT, DOWN); PIN_SLP(gpa1-1, INPUT, DOWN); PIN_SLP(gpa1-2, INPUT, DOWN); PIN_SLP(gpa1-3, INPUT, DOWN); PIN_SLP(gpa1-4, INPUT, DOWN); PIN_SLP(gpa1-5, INPUT, DOWN); PIN_SLP(gpb-0, INPUT, NONE); PIN_SLP(gpb-1, INPUT, NONE); PIN_SLP(gpb-2, INPUT, NONE); PIN_SLP(gpb-3, INPUT, NONE); PIN_SLP(gpb-4, INPUT, DOWN); PIN_SLP(gpb-5, INPUT, UP); PIN_SLP(gpb-6, INPUT, DOWN); PIN_SLP(gpb-7, INPUT, DOWN); PIN_SLP(gpc0-0, INPUT, DOWN); PIN_SLP(gpc0-1, INPUT, DOWN); PIN_SLP(gpc0-2, INPUT, DOWN); PIN_SLP(gpc0-3, INPUT, DOWN); PIN_SLP(gpc0-4, INPUT, DOWN); PIN_SLP(gpc1-0, INPUT, NONE); PIN_SLP(gpc1-1, PREV, NONE); PIN_SLP(gpc1-2, INPUT, NONE); PIN_SLP(gpc1-3, INPUT, NONE); PIN_SLP(gpc1-4, INPUT, NONE); PIN_SLP(gpd0-0, INPUT, DOWN); PIN_SLP(gpd0-1, INPUT, DOWN); PIN_SLP(gpd0-2, INPUT, NONE); PIN_SLP(gpd0-3, INPUT, NONE); PIN_SLP(gpd1-0, INPUT, DOWN); PIN_SLP(gpd1-1, INPUT, DOWN); PIN_SLP(gpd1-2, INPUT, NONE); PIN_SLP(gpd1-3, INPUT, NONE); PIN_SLP(gpf0-0, INPUT, NONE); PIN_SLP(gpf0-1, INPUT, NONE); PIN_SLP(gpf0-2, INPUT, DOWN); PIN_SLP(gpf0-3, INPUT, DOWN); PIN_SLP(gpf0-4, INPUT, NONE); PIN_SLP(gpf0-5, INPUT, DOWN); PIN_SLP(gpf0-6, INPUT, NONE); PIN_SLP(gpf0-7, INPUT, DOWN); PIN_SLP(gpf1-0, INPUT, DOWN); PIN_SLP(gpf1-1, INPUT, DOWN); PIN_SLP(gpf1-2, INPUT, DOWN); PIN_SLP(gpf1-3, INPUT, DOWN); PIN_SLP(gpf1-4, INPUT, NONE); PIN_SLP(gpf1-5, INPUT, NONE); PIN_SLP(gpf1-6, INPUT, DOWN); PIN_SLP(gpf1-7, PREV, NONE); PIN_SLP(gpf2-0, PREV, NONE); PIN_SLP(gpf2-1, INPUT, DOWN); PIN_SLP(gpf2-2, INPUT, DOWN); PIN_SLP(gpf2-3, INPUT, DOWN); PIN_SLP(gpf2-4, INPUT, DOWN); PIN_SLP(gpf2-5, INPUT, DOWN); PIN_SLP(gpf2-6, INPUT, NONE); PIN_SLP(gpf2-7, INPUT, NONE); PIN_SLP(gpf3-0, INPUT, NONE); PIN_SLP(gpf3-1, PREV, NONE); PIN_SLP(gpf3-2, PREV, NONE); PIN_SLP(gpf3-3, PREV, NONE); PIN_SLP(gpf3-4, OUT1, NONE); PIN_SLP(gpf3-5, INPUT, DOWN); PIN_SLP(gpj0-0, PREV, NONE); PIN_SLP(gpj0-1, PREV, NONE); PIN_SLP(gpj0-2, PREV, NONE); PIN_SLP(gpj0-3, INPUT, DOWN); PIN_SLP(gpj0-4, PREV, NONE); PIN_SLP(gpj0-5, PREV, NONE); PIN_SLP(gpj0-6, INPUT, DOWN); PIN_SLP(gpj0-7, INPUT, DOWN); PIN_SLP(gpj1-0, INPUT, DOWN); PIN_SLP(gpj1-1, PREV, NONE); PIN_SLP(gpj1-2, PREV, NONE); PIN_SLP(gpj1-3, INPUT, DOWN); PIN_SLP(gpj1-4, INPUT, DOWN); }; }; &pinctrl_1 { pinctrl-names = "default"; pinctrl-0 = <&sleep1>; sleep1: sleep-states { PIN_SLP(gpk0-0, PREV, NONE); PIN_SLP(gpk0-1, PREV, NONE); PIN_SLP(gpk0-2, OUT0, NONE); PIN_SLP(gpk0-3, PREV, NONE); PIN_SLP(gpk0-4, PREV, NONE); PIN_SLP(gpk0-5, PREV, NONE); PIN_SLP(gpk0-6, PREV, NONE); PIN_SLP(gpk1-0, INPUT, DOWN); PIN_SLP(gpk1-1, INPUT, DOWN); PIN_SLP(gpk1-2, INPUT, DOWN); PIN_SLP(gpk1-3, PREV, NONE); PIN_SLP(gpk1-4, PREV, NONE); PIN_SLP(gpk1-5, PREV, NONE); PIN_SLP(gpk1-6, PREV, NONE); PIN_SLP(gpk2-0, INPUT, DOWN); PIN_SLP(gpk2-1, INPUT, DOWN); PIN_SLP(gpk2-2, INPUT, DOWN); PIN_SLP(gpk2-3, INPUT, DOWN); PIN_SLP(gpk2-4, INPUT, DOWN); PIN_SLP(gpk2-5, INPUT, DOWN); PIN_SLP(gpk2-6, INPUT, DOWN); PIN_SLP(gpk3-0, OUT0, NONE); PIN_SLP(gpk3-1, INPUT, NONE); PIN_SLP(gpk3-2, INPUT, DOWN); PIN_SLP(gpk3-3, INPUT, NONE); PIN_SLP(gpk3-4, INPUT, NONE); PIN_SLP(gpk3-5, INPUT, NONE); PIN_SLP(gpk3-6, INPUT, NONE); PIN_SLP(gpl0-0, INPUT, DOWN); PIN_SLP(gpl0-1, INPUT, DOWN); PIN_SLP(gpl0-2, INPUT, DOWN); PIN_SLP(gpl0-3, INPUT, DOWN); PIN_SLP(gpl0-4, PREV, NONE); PIN_SLP(gpl0-6, PREV, NONE); PIN_SLP(gpl1-0, INPUT, DOWN); PIN_SLP(gpl1-1, INPUT, DOWN); PIN_SLP(gpl2-0, INPUT, DOWN); PIN_SLP(gpl2-1, INPUT, DOWN); PIN_SLP(gpl2-2, INPUT, DOWN); PIN_SLP(gpl2-3, INPUT, DOWN); PIN_SLP(gpl2-4, INPUT, DOWN); PIN_SLP(gpl2-5, INPUT, DOWN); PIN_SLP(gpl2-6, PREV, NONE); PIN_SLP(gpl2-7, INPUT, DOWN); PIN_SLP(gpm0-0, INPUT, DOWN); PIN_SLP(gpm0-1, INPUT, DOWN); PIN_SLP(gpm0-2, INPUT, DOWN); PIN_SLP(gpm0-3, INPUT, DOWN); PIN_SLP(gpm0-4, INPUT, DOWN); PIN_SLP(gpm0-5, INPUT, DOWN); PIN_SLP(gpm0-6, INPUT, DOWN); PIN_SLP(gpm0-7, INPUT, DOWN); PIN_SLP(gpm1-0, INPUT, DOWN); PIN_SLP(gpm1-1, INPUT, DOWN); PIN_SLP(gpm1-2, INPUT, NONE); PIN_SLP(gpm1-3, INPUT, NONE); PIN_SLP(gpm1-4, INPUT, NONE); PIN_SLP(gpm1-5, INPUT, NONE); PIN_SLP(gpm1-6, INPUT, DOWN); PIN_SLP(gpm2-0, INPUT, NONE); PIN_SLP(gpm2-1, INPUT, NONE); PIN_SLP(gpm2-2, INPUT, DOWN); PIN_SLP(gpm2-3, INPUT, DOWN); PIN_SLP(gpm2-4, INPUT, DOWN); PIN_SLP(gpm3-0, PREV, NONE); PIN_SLP(gpm3-1, PREV, NONE); PIN_SLP(gpm3-2, PREV, NONE); PIN_SLP(gpm3-3, OUT1, NONE); PIN_SLP(gpm3-4, INPUT, DOWN); PIN_SLP(gpm3-5, INPUT, DOWN); PIN_SLP(gpm3-6, INPUT, DOWN); PIN_SLP(gpm3-7, INPUT, DOWN); PIN_SLP(gpm4-0, INPUT, DOWN); PIN_SLP(gpm4-1, INPUT, DOWN); PIN_SLP(gpm4-2, INPUT, DOWN); PIN_SLP(gpm4-3, INPUT, DOWN); PIN_SLP(gpm4-4, INPUT, DOWN); PIN_SLP(gpm4-5, INPUT, DOWN); PIN_SLP(gpm4-6, INPUT, DOWN); PIN_SLP(gpm4-7, INPUT, DOWN); PIN_SLP(gpy0-0, INPUT, DOWN); PIN_SLP(gpy0-1, INPUT, DOWN); PIN_SLP(gpy0-2, INPUT, DOWN); PIN_SLP(gpy0-3, INPUT, DOWN); PIN_SLP(gpy0-4, INPUT, DOWN); PIN_SLP(gpy0-5, INPUT, DOWN); PIN_SLP(gpy1-0, INPUT, DOWN); PIN_SLP(gpy1-1, INPUT, DOWN); PIN_SLP(gpy1-2, INPUT, DOWN); PIN_SLP(gpy1-3, INPUT, DOWN); PIN_SLP(gpy2-0, PREV, NONE); PIN_SLP(gpy2-1, INPUT, DOWN); PIN_SLP(gpy2-2, INPUT, NONE); PIN_SLP(gpy2-3, INPUT, NONE); PIN_SLP(gpy2-4, INPUT, NONE); PIN_SLP(gpy2-5, INPUT, NONE); PIN_SLP(gpy3-0, INPUT, DOWN); PIN_SLP(gpy3-1, INPUT, DOWN); PIN_SLP(gpy3-2, INPUT, DOWN); PIN_SLP(gpy3-3, INPUT, DOWN); PIN_SLP(gpy3-4, INPUT, DOWN); PIN_SLP(gpy3-5, INPUT, DOWN); PIN_SLP(gpy3-6, INPUT, DOWN); PIN_SLP(gpy3-7, INPUT, DOWN); PIN_SLP(gpy4-0, INPUT, DOWN); PIN_SLP(gpy4-1, INPUT, DOWN); PIN_SLP(gpy4-2, INPUT, DOWN); PIN_SLP(gpy4-3, INPUT, DOWN); PIN_SLP(gpy4-4, INPUT, DOWN); PIN_SLP(gpy4-5, INPUT, DOWN); PIN_SLP(gpy4-6, INPUT, DOWN); PIN_SLP(gpy4-7, INPUT, DOWN); PIN_SLP(gpy5-0, INPUT, DOWN); PIN_SLP(gpy5-1, INPUT, DOWN); PIN_SLP(gpy5-2, INPUT, DOWN); PIN_SLP(gpy5-3, INPUT, DOWN); PIN_SLP(gpy5-4, INPUT, DOWN); PIN_SLP(gpy5-5, INPUT, DOWN); PIN_SLP(gpy5-6, INPUT, DOWN); PIN_SLP(gpy5-7, INPUT, DOWN); PIN_SLP(gpy6-0, INPUT, DOWN); PIN_SLP(gpy6-1, INPUT, DOWN); PIN_SLP(gpy6-2, INPUT, DOWN); PIN_SLP(gpy6-3, INPUT, DOWN); PIN_SLP(gpy6-4, INPUT, DOWN); PIN_SLP(gpy6-5, INPUT, DOWN); PIN_SLP(gpy6-6, INPUT, DOWN); PIN_SLP(gpy6-7, INPUT, DOWN); }; }; &pinctrl_2 { pinctrl-names = "default"; pinctrl-0 = <&sleep2>; sleep2: sleep-states { PIN_SLP(gpz-0, INPUT, DOWN); PIN_SLP(gpz-1, INPUT, DOWN); PIN_SLP(gpz-2, INPUT, DOWN); PIN_SLP(gpz-3, INPUT, DOWN); PIN_SLP(gpz-4, INPUT, DOWN); PIN_SLP(gpz-5, INPUT, DOWN); PIN_SLP(gpz-6, INPUT, DOWN); }; }; &pinctrl_3 { pinctrl-names = "default"; pinctrl-0 = <&sleep3>; sleep3: sleep-states { PIN_SLP(gpv0-0, INPUT, DOWN); PIN_SLP(gpv0-1, INPUT, DOWN); PIN_SLP(gpv0-2, INPUT, DOWN); PIN_SLP(gpv0-3, INPUT, DOWN); PIN_SLP(gpv0-4, INPUT, DOWN); PIN_SLP(gpv0-5, INPUT, DOWN); PIN_SLP(gpv0-6, INPUT, DOWN); PIN_SLP(gpv0-7, INPUT, DOWN); PIN_SLP(gpv1-0, INPUT, DOWN); PIN_SLP(gpv1-1, INPUT, DOWN); PIN_SLP(gpv1-2, INPUT, DOWN); PIN_SLP(gpv1-3, INPUT, DOWN); PIN_SLP(gpv1-4, INPUT, DOWN); PIN_SLP(gpv1-5, INPUT, DOWN); PIN_SLP(gpv1-6, INPUT, DOWN); PIN_SLP(gpv1-7, INPUT, DOWN); PIN_SLP(gpv2-0, INPUT, DOWN); PIN_SLP(gpv2-1, INPUT, DOWN); PIN_SLP(gpv2-2, INPUT, DOWN); PIN_SLP(gpv2-3, INPUT, DOWN); PIN_SLP(gpv2-4, INPUT, DOWN); PIN_SLP(gpv2-5, INPUT, DOWN); PIN_SLP(gpv2-6, INPUT, DOWN); PIN_SLP(gpv2-7, INPUT, DOWN); PIN_SLP(gpv3-0, INPUT, DOWN); PIN_SLP(gpv3-1, INPUT, DOWN); PIN_SLP(gpv3-2, INPUT, DOWN); PIN_SLP(gpv3-3, INPUT, DOWN); PIN_SLP(gpv3-4, INPUT, DOWN); PIN_SLP(gpv3-5, INPUT, DOWN); PIN_SLP(gpv3-6, INPUT, DOWN); PIN_SLP(gpv3-7, INPUT, DOWN); PIN_SLP(gpv4-0, INPUT, DOWN); }; };