/* * Copyright © 2012 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * * Authors: * Eugeni Dodonov * */ #include "i915_drv.h" #include "intel_drv.h" struct ddi_buf_trans { u32 trans1; /* balance leg enable, de-emph level */ u32 trans2; /* vref sel, vswing */ u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */ }; /* HDMI/DVI modes ignore everything but the last 2 items. So we share * them for both DP and FDI transports, allowing those ports to * automatically adapt to HDMI connections as well */ static const struct ddi_buf_trans hsw_ddi_translations_dp[] = { { 0x00FFFFFF, 0x0006000E, 0x0 }, { 0x00D75FFF, 0x0005000A, 0x0 }, { 0x00C30FFF, 0x00040006, 0x0 }, { 0x80AAAFFF, 0x000B0000, 0x0 }, { 0x00FFFFFF, 0x0005000A, 0x0 }, { 0x00D75FFF, 0x000C0004, 0x0 }, { 0x80C30FFF, 0x000B0000, 0x0 }, { 0x00FFFFFF, 0x00040006, 0x0 }, { 0x80D75FFF, 0x000B0000, 0x0 }, }; static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = { { 0x00FFFFFF, 0x0007000E, 0x0 }, { 0x00D75FFF, 0x000F000A, 0x0 }, { 0x00C30FFF, 0x00060006, 0x0 }, { 0x00AAAFFF, 0x001E0000, 0x0 }, { 0x00FFFFFF, 0x000F000A, 0x0 }, { 0x00D75FFF, 0x00160004, 0x0 }, { 0x00C30FFF, 0x001E0000, 0x0 }, { 0x00FFFFFF, 0x00060006, 0x0 }, { 0x00D75FFF, 0x001E0000, 0x0 }, }; static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = { /* Idx NT mV d T mV d db */ { 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */ { 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */ { 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */ { 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */ { 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */ { 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */ { 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */ { 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */ { 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */ { 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */ { 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */ { 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */ }; static const struct ddi_buf_trans bdw_ddi_translations_edp[] = { { 0x00FFFFFF, 0x00000012, 0x0 }, { 0x00EBAFFF, 0x00020011, 0x0 }, { 0x00C71FFF, 0x0006000F, 0x0 }, { 0x00AAAFFF, 0x000E000A, 0x0 }, { 0x00FFFFFF, 0x00020011, 0x0 }, { 0x00DB6FFF, 0x0005000F, 0x0 }, { 0x00BEEFFF, 0x000A000C, 0x0 }, { 0x00FFFFFF, 0x0005000F, 0x0 }, { 0x00DB6FFF, 0x000A000C, 0x0 }, }; static const struct ddi_buf_trans bdw_ddi_translations_dp[] = { { 0x00FFFFFF, 0x0007000E, 0x0 }, { 0x00D75FFF, 0x000E000A, 0x0 }, { 0x00BEFFFF, 0x00140006, 0x0 }, { 0x80B2CFFF, 0x001B0002, 0x0 }, { 0x00FFFFFF, 0x000E000A, 0x0 }, { 0x00DB6FFF, 0x00160005, 0x0 }, { 0x80C71FFF, 0x001A0002, 0x0 }, { 0x00F7DFFF, 0x00180004, 0x0 }, { 0x80D75FFF, 0x001B0002, 0x0 }, }; static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = { { 0x00FFFFFF, 0x0001000E, 0x0 }, { 0x00D75FFF, 0x0004000A, 0x0 }, { 0x00C30FFF, 0x00070006, 0x0 }, { 0x00AAAFFF, 0x000C0000, 0x0 }, { 0x00FFFFFF, 0x0004000A, 0x0 }, { 0x00D75FFF, 0x00090004, 0x0 }, { 0x00C30FFF, 0x000C0000, 0x0 }, { 0x00FFFFFF, 0x00070006, 0x0 }, { 0x00D75FFF, 0x000C0000, 0x0 }, }; static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = { /* Idx NT mV d T mV df db */ { 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */ { 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */ { 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */ { 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */ { 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */ { 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */ { 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */ { 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */ { 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */ { 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */ }; /* Skylake H and S */ static const struct ddi_buf_trans skl_ddi_translations_dp[] = { { 0x00002016, 0x000000A0, 0x0 }, { 0x00005012, 0x0000009B, 0x0 }, { 0x00007011, 0x00000088, 0x0 }, { 0x80009010, 0x000000C0, 0x1 }, { 0x00002016, 0x0000009B, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, { 0x80007011, 0x000000C0, 0x1 }, { 0x00002016, 0x000000DF, 0x0 }, { 0x80005012, 0x000000C0, 0x1 }, }; /* Skylake U */ static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = { { 0x0000201B, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, { 0x80007011, 0x000000CD, 0x1 }, { 0x80009010, 0x000000C0, 0x1 }, { 0x0000201B, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x1 }, { 0x80007011, 0x000000C0, 0x1 }, { 0x00002016, 0x00000088, 0x0 }, { 0x80005012, 0x000000C0, 0x1 }, }; /* Skylake Y */ static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = { { 0x00000018, 0x000000A2, 0x0 }, { 0x00005012, 0x00000088, 0x0 }, { 0x80007011, 0x000000CD, 0x3 }, { 0x80009010, 0x000000C0, 0x3 }, { 0x00000018, 0x0000009D, 0x0 }, { 0x80005012, 0x000000C0, 0x3 }, { 0x80007011, 0x000000C0, 0x3 }, { 0x00000018, 0x00000088, 0x0 }, { 0x80005012, 0x000000C0, 0x3 }, }; /* * Skylake H and S * eDP 1.4 low vswing translation parameters */ static const struct ddi_buf_trans skl_ddi_translations_edp[] = { { 0x00000018, 0x000000A8, 0x0 }, { 0x00004013, 0x000000A9, 0x0 }, { 0x00007011, 0x000000A2, 0x0 }, { 0x00009010, 0x0000009C, 0x0 }, { 0x00000018, 0x000000A9, 0x0 }, { 0x00006013, 0x000000A2, 0x0 }, { 0x00007011, 0x000000A6, 0x0 }, { 0x00000018, 0x000000AB, 0x0 }, { 0x00007013, 0x0000009F, 0x0 }, { 0x00000018, 0x000000DF, 0x0 }, }; /* * Skylake U * eDP 1.4 low vswing translation parameters */ static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = { { 0x00000018, 0x000000A8, 0x0 }, { 0x00004013, 0x000000A9, 0x0 }, { 0x00007011, 0x000000A2, 0x0 }, { 0x00009010, 0x0000009C, 0x0 }, { 0x00000018, 0x000000A9, 0x0 }, { 0x00006013, 0x000000A2, 0x0 }, { 0x00007011, 0x000000A6, 0x0 }, { 0x00002016, 0x000000AB, 0x0 }, { 0x00005013, 0x0000009F, 0x0 }, { 0x00000018, 0x000000DF, 0x0 }, }; /* * Skylake Y * eDP 1.4 low vswing translation parameters */ static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = { { 0x00000018, 0x000000A8, 0x0 }, { 0x00004013, 0x000000AB, 0x0 }, { 0x00007011, 0x000000A4, 0x0 }, { 0x00009010, 0x000000DF, 0x0 }, { 0x00000018, 0x000000AA, 0x0 }, { 0x00006013, 0x000000A4, 0x0 }, { 0x00007011, 0x0000009D, 0x0 }, { 0x00000018, 0x000000A0, 0x0 }, { 0x00006012, 0x000000DF, 0x0 }, { 0x00000018, 0x0000008A, 0x0 }, }; /* Skylake U, H and S */ static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = { { 0x00000018, 0x000000AC, 0x0 }, { 0x00005012, 0x0000009D, 0x0 }, { 0x00007011, 0x00000088, 0x0 }, { 0x00000018, 0x000000A1, 0x0 }, { 0x00000018, 0x00000098, 0x0 }, { 0x00004013, 0x00000088, 0x0 }, { 0x80006012, 0x000000CD, 0x1 }, { 0x00000018, 0x000000DF, 0x0 }, { 0x80003015, 0x000000CD, 0x1 }, /* Default */ { 0x80003015, 0x000000C0, 0x1 }, { 0x80000018, 0x000000C0, 0x1 }, }; /* Skylake Y */ static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = { { 0x00000018, 0x000000A1, 0x0 }, { 0x00005012, 0x000000DF, 0x0 }, { 0x80007011, 0x000000CB, 0x3 }, { 0x00000018, 0x000000A4, 0x0 }, { 0x00000018, 0x0000009D, 0x0 }, { 0x00004013, 0x00000080, 0x0 }, { 0x80006013, 0x000000C0, 0x3 }, { 0x00000018, 0x0000008A, 0x0 }, { 0x80003015, 0x000000C0, 0x3 }, /* Default */ { 0x80003015, 0x000000C0, 0x3 }, { 0x80000018, 0x000000C0, 0x3 }, }; struct bxt_ddi_buf_trans { u32 margin; /* swing value */ u32 scale; /* scale value */ u32 enable; /* scale enable */ u32 deemphasis; bool default_index; /* true if the entry represents default value */ }; static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = { /* Idx NT mV diff db */ { 52, 0x9A, 0, 128, true }, /* 0: 400 0 */ { 78, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ { 104, 0x9A, 0, 64, false }, /* 2: 400 6 */ { 154, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ { 116, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ { 154, 0x9A, 0, 64, false }, /* 6: 600 6 */ { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ { 154, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ { 154, 0x9A, 1, 128, false }, /* 9: 1200 0 */ }; static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = { /* Idx NT mV diff db */ { 26, 0, 0, 128, false }, /* 0: 200 0 */ { 38, 0, 0, 112, false }, /* 1: 200 1.5 */ { 48, 0, 0, 96, false }, /* 2: 200 4 */ { 54, 0, 0, 69, false }, /* 3: 200 6 */ { 32, 0, 0, 128, false }, /* 4: 250 0 */ { 48, 0, 0, 104, false }, /* 5: 250 1.5 */ { 54, 0, 0, 85, false }, /* 6: 250 4 */ { 43, 0, 0, 128, false }, /* 7: 300 0 */ { 54, 0, 0, 101, false }, /* 8: 300 1.5 */ { 48, 0, 0, 128, false }, /* 9: 300 0 */ }; /* BSpec has 2 recommended values - entries 0 and 8. * Using the entry with higher vswing. */ static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = { /* Idx NT mV diff db */ { 52, 0x9A, 0, 128, false }, /* 0: 400 0 */ { 52, 0x9A, 0, 85, false }, /* 1: 400 3.5 */ { 52, 0x9A, 0, 64, false }, /* 2: 400 6 */ { 42, 0x9A, 0, 43, false }, /* 3: 400 9.5 */ { 77, 0x9A, 0, 128, false }, /* 4: 600 0 */ { 77, 0x9A, 0, 85, false }, /* 5: 600 3.5 */ { 77, 0x9A, 0, 64, false }, /* 6: 600 6 */ { 102, 0x9A, 0, 128, false }, /* 7: 800 0 */ { 102, 0x9A, 0, 85, false }, /* 8: 800 3.5 */ { 154, 0x9A, 1, 128, true }, /* 9: 1200 0 */ }; enum port intel_ddi_get_encoder_port(struct intel_encoder *encoder) { switch (encoder->type) { case INTEL_OUTPUT_DP_MST: return enc_to_mst(&encoder->base)->primary->port; case INTEL_OUTPUT_DP: case INTEL_OUTPUT_EDP: case INTEL_OUTPUT_HDMI: case INTEL_OUTPUT_UNKNOWN: return enc_to_dig_port(&encoder->base)->port; case INTEL_OUTPUT_ANALOG: return PORT_E; default: MISSING_CASE(encoder->type); return PORT_A; } } static const struct ddi_buf_trans * bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) { if (dev_priv->vbt.edp.low_vswing) { *n_entries = ARRAY_SIZE(bdw_ddi_translations_edp); return bdw_ddi_translations_edp; } else { *n_entries = ARRAY_SIZE(bdw_ddi_translations_dp); return bdw_ddi_translations_dp; } } static const struct ddi_buf_trans * skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries) { if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp); return skl_y_ddi_translations_dp; } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv)) { *n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp); return skl_u_ddi_translations_dp; } else { *n_entries = ARRAY_SIZE(skl_ddi_translations_dp); return skl_ddi_translations_dp; } } static const struct ddi_buf_trans * skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries) { if (dev_priv->vbt.edp.low_vswing) { if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp); return skl_y_ddi_translations_edp; } else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv)) { *n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp); return skl_u_ddi_translations_edp; } else { *n_entries = ARRAY_SIZE(skl_ddi_translations_edp); return skl_ddi_translations_edp; } } return skl_get_buf_trans_dp(dev_priv, n_entries); } static const struct ddi_buf_trans * skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries) { if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) { *n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi); return skl_y_ddi_translations_hdmi; } else { *n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi); return skl_ddi_translations_hdmi; } } static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port) { int n_hdmi_entries; int hdmi_level; int hdmi_default_entry; hdmi_level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift; if (IS_BROXTON(dev_priv)) return hdmi_level; if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); hdmi_default_entry = 8; } else if (IS_BROADWELL(dev_priv)) { n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); hdmi_default_entry = 7; } else if (IS_HASWELL(dev_priv)) { n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); hdmi_default_entry = 6; } else { WARN(1, "ddi translation table missing\n"); n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); hdmi_default_entry = 7; } /* Choose a good default if VBT is badly populated */ if (hdmi_level == HDMI_LEVEL_SHIFT_UNKNOWN || hdmi_level >= n_hdmi_entries) hdmi_level = hdmi_default_entry; return hdmi_level; } /* * Starting with Haswell, DDI port buffers must be programmed with correct * values in advance. This function programs the correct values for * DP/eDP/FDI use cases. */ void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 iboost_bit = 0; int i, n_dp_entries, n_edp_entries, size; enum port port = intel_ddi_get_encoder_port(encoder); const struct ddi_buf_trans *ddi_translations_fdi; const struct ddi_buf_trans *ddi_translations_dp; const struct ddi_buf_trans *ddi_translations_edp; const struct ddi_buf_trans *ddi_translations; if (IS_BROXTON(dev_priv)) return; if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { ddi_translations_fdi = NULL; ddi_translations_dp = skl_get_buf_trans_dp(dev_priv, &n_dp_entries); ddi_translations_edp = skl_get_buf_trans_edp(dev_priv, &n_edp_entries); /* If we're boosting the current, set bit 31 of trans1 */ if (dev_priv->vbt.ddi_port_info[port].dp_boost_level) iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; if (WARN_ON(encoder->type == INTEL_OUTPUT_EDP && port != PORT_A && port != PORT_E && n_edp_entries > 9)) n_edp_entries = 9; } else if (IS_BROADWELL(dev_priv)) { ddi_translations_fdi = bdw_ddi_translations_fdi; ddi_translations_dp = bdw_ddi_translations_dp; ddi_translations_edp = bdw_get_buf_trans_edp(dev_priv, &n_edp_entries); n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); } else if (IS_HASWELL(dev_priv)) { ddi_translations_fdi = hsw_ddi_translations_fdi; ddi_translations_dp = hsw_ddi_translations_dp; ddi_translations_edp = hsw_ddi_translations_dp; n_dp_entries = n_edp_entries = ARRAY_SIZE(hsw_ddi_translations_dp); } else { WARN(1, "ddi translation table missing\n"); ddi_translations_edp = bdw_ddi_translations_dp; ddi_translations_fdi = bdw_ddi_translations_fdi; ddi_translations_dp = bdw_ddi_translations_dp; n_edp_entries = ARRAY_SIZE(bdw_ddi_translations_edp); n_dp_entries = ARRAY_SIZE(bdw_ddi_translations_dp); } switch (encoder->type) { case INTEL_OUTPUT_EDP: ddi_translations = ddi_translations_edp; size = n_edp_entries; break; case INTEL_OUTPUT_DP: ddi_translations = ddi_translations_dp; size = n_dp_entries; break; case INTEL_OUTPUT_ANALOG: ddi_translations = ddi_translations_fdi; size = n_dp_entries; break; default: BUG(); } for (i = 0; i < size; i++) { I915_WRITE(DDI_BUF_TRANS_LO(port, i), ddi_translations[i].trans1 | iboost_bit); I915_WRITE(DDI_BUF_TRANS_HI(port, i), ddi_translations[i].trans2); } } /* * Starting with Haswell, DDI port buffers must be programmed with correct * values in advance. This function programs the correct values for * HDMI/DVI use cases. */ static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); u32 iboost_bit = 0; int n_hdmi_entries, hdmi_level; enum port port = intel_ddi_get_encoder_port(encoder); const struct ddi_buf_trans *ddi_translations_hdmi; if (IS_BROXTON(dev_priv)) return; hdmi_level = intel_ddi_hdmi_level(dev_priv, port); if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { ddi_translations_hdmi = skl_get_buf_trans_hdmi(dev_priv, &n_hdmi_entries); /* If we're boosting the current, set bit 31 of trans1 */ if (dev_priv->vbt.ddi_port_info[port].hdmi_boost_level) iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE; } else if (IS_BROADWELL(dev_priv)) { ddi_translations_hdmi = bdw_ddi_translations_hdmi; n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); } else if (IS_HASWELL(dev_priv)) { ddi_translations_hdmi = hsw_ddi_translations_hdmi; n_hdmi_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi); } else { WARN(1, "ddi translation table missing\n"); ddi_translations_hdmi = bdw_ddi_translations_hdmi; n_hdmi_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi); } /* Entry 9 is for HDMI: */ I915_WRITE(DDI_BUF_TRANS_LO(port, 9), ddi_translations_hdmi[hdmi_level].trans1 | iboost_bit); I915_WRITE(DDI_BUF_TRANS_HI(port, 9), ddi_translations_hdmi[hdmi_level].trans2); } static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv, enum port port) { i915_reg_t reg = DDI_BUF_CTL(port); int i; for (i = 0; i < 16; i++) { udelay(1); if (I915_READ(reg) & DDI_BUF_IS_IDLE) return; } DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port)); } static uint32_t hsw_pll_to_ddi_pll_sel(struct intel_shared_dpll *pll) { switch (pll->id) { case DPLL_ID_WRPLL1: return PORT_CLK_SEL_WRPLL1; case DPLL_ID_WRPLL2: return PORT_CLK_SEL_WRPLL2; case DPLL_ID_SPLL: return PORT_CLK_SEL_SPLL; case DPLL_ID_LCPLL_810: return PORT_CLK_SEL_LCPLL_810; case DPLL_ID_LCPLL_1350: return PORT_CLK_SEL_LCPLL_1350; case DPLL_ID_LCPLL_2700: return PORT_CLK_SEL_LCPLL_2700; default: MISSING_CASE(pll->id); return PORT_CLK_SEL_NONE; } } /* Starting with Haswell, different DDI ports can work in FDI mode for * connection to the PCH-located connectors. For this, it is necessary to train * both the DDI port and PCH receiver for the desired DDI buffer settings. * * The recommended port to work in FDI mode is DDI E, which we use here. Also, * please note that when FDI mode is active on DDI E, it shares 2 lines with * DDI A (which is used for eDP) */ void hsw_fdi_link_train(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *encoder; u32 temp, i, rx_ctl_val, ddi_pll_sel; for_each_encoder_on_crtc(dev, crtc, encoder) { WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG); intel_prepare_dp_ddi_buffers(encoder); } /* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the * mode set "sequence for CRT port" document: * - TP1 to TP2 time with the default value * - FDI delay to 90h * * WaFDIAutoLinkSetTimingOverrride:hsw */ I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90); /* Enable the PCH Receiver FDI PLL */ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | FDI_RX_PLL_ENABLE | FDI_DP_PORT_WIDTH(intel_crtc->config->fdi_lanes); I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); POSTING_READ(FDI_RX_CTL(PIPE_A)); udelay(220); /* Switch from Rawclk to PCDclk */ rx_ctl_val |= FDI_PCDCLK; I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); /* Configure Port Clock Select */ ddi_pll_sel = hsw_pll_to_ddi_pll_sel(intel_crtc->config->shared_dpll); I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel); WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL); /* Start the training iterating through available voltages and emphasis, * testing each value twice. */ for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) { /* Configure DP_TP_CTL with auto-training */ I915_WRITE(DP_TP_CTL(PORT_E), DP_TP_CTL_FDI_AUTOTRAIN | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_ENABLE); /* Configure and enable DDI_BUF_CTL for DDI E with next voltage. * DDI E does not support port reversal, the functionality is * achieved on the PCH side in FDI_RX_CTL, so no need to set the * port reversal bit */ I915_WRITE(DDI_BUF_CTL(PORT_E), DDI_BUF_CTL_ENABLE | ((intel_crtc->config->fdi_lanes - 1) << 1) | DDI_BUF_TRANS_SELECT(i / 2)); POSTING_READ(DDI_BUF_CTL(PORT_E)); udelay(600); /* Program PCH FDI Receiver TU */ I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64)); /* Enable PCH FDI Receiver with auto-training */ rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO; I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); POSTING_READ(FDI_RX_CTL(PIPE_A)); /* Wait for FDI receiver lane calibration */ udelay(30); /* Unset FDI_RX_MISC pwrdn lanes */ temp = I915_READ(FDI_RX_MISC(PIPE_A)); temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); I915_WRITE(FDI_RX_MISC(PIPE_A), temp); POSTING_READ(FDI_RX_MISC(PIPE_A)); /* Wait for FDI auto training time */ udelay(5); temp = I915_READ(DP_TP_STATUS(PORT_E)); if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) { DRM_DEBUG_KMS("FDI link training done on step %d\n", i); break; } /* * Leave things enabled even if we failed to train FDI. * Results in less fireworks from the state checker. */ if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) { DRM_ERROR("FDI link training failed!\n"); break; } rx_ctl_val &= ~FDI_RX_ENABLE; I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val); POSTING_READ(FDI_RX_CTL(PIPE_A)); temp = I915_READ(DDI_BUF_CTL(PORT_E)); temp &= ~DDI_BUF_CTL_ENABLE; I915_WRITE(DDI_BUF_CTL(PORT_E), temp); POSTING_READ(DDI_BUF_CTL(PORT_E)); /* Disable DP_TP_CTL and FDI_RX_CTL and retry */ temp = I915_READ(DP_TP_CTL(PORT_E)); temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); temp |= DP_TP_CTL_LINK_TRAIN_PAT1; I915_WRITE(DP_TP_CTL(PORT_E), temp); POSTING_READ(DP_TP_CTL(PORT_E)); intel_wait_ddi_buf_idle(dev_priv, PORT_E); /* Reset FDI_RX_MISC pwrdn lanes */ temp = I915_READ(FDI_RX_MISC(PIPE_A)); temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); I915_WRITE(FDI_RX_MISC(PIPE_A), temp); POSTING_READ(FDI_RX_MISC(PIPE_A)); } /* Enable normal pixel sending for FDI */ I915_WRITE(DP_TP_CTL(PORT_E), DP_TP_CTL_FDI_AUTOTRAIN | DP_TP_CTL_LINK_TRAIN_NORMAL | DP_TP_CTL_ENHANCED_FRAME_ENABLE | DP_TP_CTL_ENABLE); } void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); intel_dp->DP = intel_dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0); intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); } static struct intel_encoder * intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *intel_encoder, *ret = NULL; int num_encoders = 0; for_each_encoder_on_crtc(dev, crtc, intel_encoder) { ret = intel_encoder; num_encoders++; } if (num_encoders != 1) WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, pipe_name(intel_crtc->pipe)); BUG_ON(ret == NULL); return ret; } struct intel_encoder * intel_ddi_get_crtc_new_encoder(struct intel_crtc_state *crtc_state) { struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); struct intel_encoder *ret = NULL; struct drm_atomic_state *state; struct drm_connector *connector; struct drm_connector_state *connector_state; int num_encoders = 0; int i; state = crtc_state->base.state; for_each_connector_in_state(state, connector, connector_state, i) { if (connector_state->crtc != crtc_state->base.crtc) continue; ret = to_intel_encoder(connector_state->best_encoder); num_encoders++; } WARN(num_encoders != 1, "%d encoders on crtc for pipe %c\n", num_encoders, pipe_name(crtc->pipe)); BUG_ON(ret == NULL); return ret; } #define LC_FREQ 2700 static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv, i915_reg_t reg) { int refclk = LC_FREQ; int n, p, r; u32 wrpll; wrpll = I915_READ(reg); switch (wrpll & WRPLL_PLL_REF_MASK) { case WRPLL_PLL_SSC: case WRPLL_PLL_NON_SSC: /* * We could calculate spread here, but our checking * code only cares about 5% accuracy, and spread is a max of * 0.5% downspread. */ refclk = 135; break; case WRPLL_PLL_LCPLL: refclk = LC_FREQ; break; default: WARN(1, "bad wrpll refclk\n"); return 0; } r = wrpll & WRPLL_DIVIDER_REF_MASK; p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT; n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT; /* Convert to KHz, p & r have a fixed point portion */ return (refclk * n * 100) / (p * r); } static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv, uint32_t dpll) { i915_reg_t cfgcr1_reg, cfgcr2_reg; uint32_t cfgcr1_val, cfgcr2_val; uint32_t p0, p1, p2, dco_freq; cfgcr1_reg = DPLL_CFGCR1(dpll); cfgcr2_reg = DPLL_CFGCR2(dpll); cfgcr1_val = I915_READ(cfgcr1_reg); cfgcr2_val = I915_READ(cfgcr2_reg); p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK; p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK; if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1)) p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8; else p1 = 1; switch (p0) { case DPLL_CFGCR2_PDIV_1: p0 = 1; break; case DPLL_CFGCR2_PDIV_2: p0 = 2; break; case DPLL_CFGCR2_PDIV_3: p0 = 3; break; case DPLL_CFGCR2_PDIV_7: p0 = 7; break; } switch (p2) { case DPLL_CFGCR2_KDIV_5: p2 = 5; break; case DPLL_CFGCR2_KDIV_2: p2 = 2; break; case DPLL_CFGCR2_KDIV_3: p2 = 3; break; case DPLL_CFGCR2_KDIV_1: p2 = 1; break; } dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000; dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 * 1000) / 0x8000; return dco_freq / (p0 * p1 * p2 * 5); } static void ddi_dotclock_get(struct intel_crtc_state *pipe_config) { int dotclock; if (pipe_config->has_pch_encoder) dotclock = intel_dotclock_calculate(pipe_config->port_clock, &pipe_config->fdi_m_n); else if (intel_crtc_has_dp_encoder(pipe_config)) dotclock = intel_dotclock_calculate(pipe_config->port_clock, &pipe_config->dp_m_n); else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36) dotclock = pipe_config->port_clock * 2 / 3; else dotclock = pipe_config->port_clock; if (pipe_config->pixel_multiplier) dotclock /= pipe_config->pixel_multiplier; pipe_config->base.adjusted_mode.crtc_clock = dotclock; } static void skl_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); int link_clock = 0; uint32_t dpll_ctl1, dpll; dpll = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll); dpll_ctl1 = I915_READ(DPLL_CTRL1); if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(dpll)) { link_clock = skl_calc_wrpll_link(dev_priv, dpll); } else { link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(dpll); link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(dpll); switch (link_clock) { case DPLL_CTRL1_LINK_RATE_810: link_clock = 81000; break; case DPLL_CTRL1_LINK_RATE_1080: link_clock = 108000; break; case DPLL_CTRL1_LINK_RATE_1350: link_clock = 135000; break; case DPLL_CTRL1_LINK_RATE_1620: link_clock = 162000; break; case DPLL_CTRL1_LINK_RATE_2160: link_clock = 216000; break; case DPLL_CTRL1_LINK_RATE_2700: link_clock = 270000; break; default: WARN(1, "Unsupported link rate\n"); break; } link_clock *= 2; } pipe_config->port_clock = link_clock; ddi_dotclock_get(pipe_config); } static void hsw_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); int link_clock = 0; u32 val, pll; val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll); switch (val & PORT_CLK_SEL_MASK) { case PORT_CLK_SEL_LCPLL_810: link_clock = 81000; break; case PORT_CLK_SEL_LCPLL_1350: link_clock = 135000; break; case PORT_CLK_SEL_LCPLL_2700: link_clock = 270000; break; case PORT_CLK_SEL_WRPLL1: link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0)); break; case PORT_CLK_SEL_WRPLL2: link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1)); break; case PORT_CLK_SEL_SPLL: pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK; if (pll == SPLL_PLL_FREQ_810MHz) link_clock = 81000; else if (pll == SPLL_PLL_FREQ_1350MHz) link_clock = 135000; else if (pll == SPLL_PLL_FREQ_2700MHz) link_clock = 270000; else { WARN(1, "bad spll freq\n"); return; } break; default: WARN(1, "bad port clock sel\n"); return; } pipe_config->port_clock = link_clock * 2; ddi_dotclock_get(pipe_config); } static int bxt_calc_pll_link(struct drm_i915_private *dev_priv, enum intel_dpll_id dpll) { struct intel_shared_dpll *pll; struct intel_dpll_hw_state *state; struct dpll clock; /* For DDI ports we always use a shared PLL. */ if (WARN_ON(dpll == DPLL_ID_PRIVATE)) return 0; pll = &dev_priv->shared_dplls[dpll]; state = &pll->config.hw_state; clock.m1 = 2; clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22; if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE) clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK; clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT; clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT; clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT; return chv_calc_dpll_params(100000, &clock); } static void bxt_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); enum port port = intel_ddi_get_encoder_port(encoder); uint32_t dpll = port; pipe_config->port_clock = bxt_calc_pll_link(dev_priv, dpll); ddi_dotclock_get(pipe_config); } void intel_ddi_clock_get(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_device *dev = encoder->base.dev; if (INTEL_INFO(dev)->gen <= 8) hsw_ddi_clock_get(encoder, pipe_config); else if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) skl_ddi_clock_get(encoder, pipe_config); else if (IS_BROXTON(dev)) bxt_ddi_clock_get(encoder, pipe_config); } static bool hsw_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { struct intel_shared_dpll *pll; pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); if (!pll) DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", pipe_name(intel_crtc->pipe)); return pll; } static bool skl_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { struct intel_shared_dpll *pll; pll = intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); if (pll == NULL) { DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", pipe_name(intel_crtc->pipe)); return false; } return true; } static bool bxt_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state, struct intel_encoder *intel_encoder) { return !!intel_get_shared_dpll(intel_crtc, crtc_state, intel_encoder); } /* * Tries to find a *shared* PLL for the CRTC and store it in * intel_crtc->ddi_pll_sel. * * For private DPLLs, compute_config() should do the selection for us. This * function should be folded into compute_config() eventually. */ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc, struct intel_crtc_state *crtc_state) { struct drm_device *dev = intel_crtc->base.dev; struct intel_encoder *intel_encoder = intel_ddi_get_crtc_new_encoder(crtc_state); if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) return skl_ddi_pll_select(intel_crtc, crtc_state, intel_encoder); else if (IS_BROXTON(dev)) return bxt_ddi_pll_select(intel_crtc, crtc_state, intel_encoder); else return hsw_ddi_pll_select(intel_crtc, crtc_state, intel_encoder); } void intel_ddi_set_pipe_settings(struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = to_i915(crtc->dev); struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; int type = intel_encoder->type; uint32_t temp; if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP || type == INTEL_OUTPUT_DP_MST) { WARN_ON(transcoder_is_dsi(cpu_transcoder)); temp = TRANS_MSA_SYNC_CLK; switch (intel_crtc->config->pipe_bpp) { case 18: temp |= TRANS_MSA_6_BPC; break; case 24: temp |= TRANS_MSA_8_BPC; break; case 30: temp |= TRANS_MSA_10_BPC; break; case 36: temp |= TRANS_MSA_12_BPC; break; default: BUG(); } I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp); } } void intel_ddi_set_vc_payload_alloc(struct drm_crtc *crtc, bool state) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; uint32_t temp; temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); if (state == true) temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC; else temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC; I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); } void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); enum pipe pipe = intel_crtc->pipe; enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; uint32_t temp; /* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */ temp = TRANS_DDI_FUNC_ENABLE; temp |= TRANS_DDI_SELECT_PORT(port); switch (intel_crtc->config->pipe_bpp) { case 18: temp |= TRANS_DDI_BPC_6; break; case 24: temp |= TRANS_DDI_BPC_8; break; case 30: temp |= TRANS_DDI_BPC_10; break; case 36: temp |= TRANS_DDI_BPC_12; break; default: BUG(); } if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC) temp |= TRANS_DDI_PVSYNC; if (intel_crtc->config->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC) temp |= TRANS_DDI_PHSYNC; if (cpu_transcoder == TRANSCODER_EDP) { switch (pipe) { case PIPE_A: /* On Haswell, can only use the always-on power well for * eDP when not using the panel fitter, and when not * using motion blur mitigation (which we don't * support). */ if (IS_HASWELL(dev) && (intel_crtc->config->pch_pfit.enabled || intel_crtc->config->pch_pfit.force_thru)) temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; else temp |= TRANS_DDI_EDP_INPUT_A_ON; break; case PIPE_B: temp |= TRANS_DDI_EDP_INPUT_B_ONOFF; break; case PIPE_C: temp |= TRANS_DDI_EDP_INPUT_C_ONOFF; break; default: BUG(); break; } } if (type == INTEL_OUTPUT_HDMI) { if (intel_crtc->config->has_hdmi_sink) temp |= TRANS_DDI_MODE_SELECT_HDMI; else temp |= TRANS_DDI_MODE_SELECT_DVI; } else if (type == INTEL_OUTPUT_ANALOG) { temp |= TRANS_DDI_MODE_SELECT_FDI; temp |= (intel_crtc->config->fdi_lanes - 1) << 1; } else if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { temp |= TRANS_DDI_MODE_SELECT_DP_SST; temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); } else if (type == INTEL_OUTPUT_DP_MST) { temp |= TRANS_DDI_MODE_SELECT_DP_MST; temp |= DDI_PORT_WIDTH(intel_crtc->config->lane_count); } else { WARN(1, "Invalid encoder type %d for pipe %c\n", intel_encoder->type, pipe_name(pipe)); } I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); } void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv, enum transcoder cpu_transcoder) { i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder); uint32_t val = I915_READ(reg); val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC); val |= TRANS_DDI_PORT_NONE; I915_WRITE(reg, val); } bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector) { struct drm_device *dev = intel_connector->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); struct intel_encoder *intel_encoder = intel_connector->encoder; int type = intel_connector->base.connector_type; enum port port = intel_ddi_get_encoder_port(intel_encoder); enum pipe pipe = 0; enum transcoder cpu_transcoder; enum intel_display_power_domain power_domain; uint32_t tmp; bool ret; power_domain = intel_display_port_power_domain(intel_encoder); if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) return false; if (!intel_encoder->get_hw_state(intel_encoder, &pipe)) { ret = false; goto out; } if (port == PORT_A) cpu_transcoder = TRANSCODER_EDP; else cpu_transcoder = (enum transcoder) pipe; tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); switch (tmp & TRANS_DDI_MODE_SELECT_MASK) { case TRANS_DDI_MODE_SELECT_HDMI: case TRANS_DDI_MODE_SELECT_DVI: ret = type == DRM_MODE_CONNECTOR_HDMIA; break; case TRANS_DDI_MODE_SELECT_DP_SST: ret = type == DRM_MODE_CONNECTOR_eDP || type == DRM_MODE_CONNECTOR_DisplayPort; break; case TRANS_DDI_MODE_SELECT_DP_MST: /* if the transcoder is in MST state then * connector isn't connected */ ret = false; break; case TRANS_DDI_MODE_SELECT_FDI: ret = type == DRM_MODE_CONNECTOR_VGA; break; default: ret = false; break; } out: intel_display_power_put(dev_priv, power_domain); return ret; } bool intel_ddi_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe) { struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_ddi_get_encoder_port(encoder); enum intel_display_power_domain power_domain; u32 tmp; int i; bool ret; power_domain = intel_display_port_power_domain(encoder); if (!intel_display_power_get_if_enabled(dev_priv, power_domain)) return false; ret = false; tmp = I915_READ(DDI_BUF_CTL(port)); if (!(tmp & DDI_BUF_CTL_ENABLE)) goto out; if (port == PORT_A) { tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { case TRANS_DDI_EDP_INPUT_A_ON: case TRANS_DDI_EDP_INPUT_A_ONOFF: *pipe = PIPE_A; break; case TRANS_DDI_EDP_INPUT_B_ONOFF: *pipe = PIPE_B; break; case TRANS_DDI_EDP_INPUT_C_ONOFF: *pipe = PIPE_C; break; } ret = true; goto out; } for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) { tmp = I915_READ(TRANS_DDI_FUNC_CTL(i)); if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) { if ((tmp & TRANS_DDI_MODE_SELECT_MASK) == TRANS_DDI_MODE_SELECT_DP_MST) goto out; *pipe = i; ret = true; goto out; } } DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); out: if (ret && IS_BROXTON(dev_priv)) { tmp = I915_READ(BXT_PHY_CTL(port)); if ((tmp & (BXT_PHY_LANE_POWERDOWN_ACK | BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED) DRM_ERROR("Port %c enabled but PHY powered down? " "(PHY_CTL %08x)\n", port_name(port), tmp); } intel_display_power_put(dev_priv, power_domain); return ret; } void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc) { struct drm_crtc *crtc = &intel_crtc->base; struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = to_i915(dev); struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); enum port port = intel_ddi_get_encoder_port(intel_encoder); enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; if (cpu_transcoder != TRANSCODER_EDP) I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), TRANS_CLK_SEL_PORT(port)); } void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc) { struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev); enum transcoder cpu_transcoder = intel_crtc->config->cpu_transcoder; if (cpu_transcoder != TRANSCODER_EDP) I915_WRITE(TRANS_CLK_SEL(cpu_transcoder), TRANS_CLK_SEL_DISABLED); } static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv, enum port port, uint8_t iboost) { u32 tmp; tmp = I915_READ(DISPIO_CR_TX_BMU_CR0); tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port)); if (iboost) tmp |= iboost << BALANCE_LEG_SHIFT(port); else tmp |= BALANCE_LEG_DISABLE(port); I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp); } static void skl_ddi_set_iboost(struct intel_encoder *encoder, u32 level) { struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base); struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); enum port port = intel_dig_port->port; int type = encoder->type; const struct ddi_buf_trans *ddi_translations; uint8_t iboost; uint8_t dp_iboost, hdmi_iboost; int n_entries; /* VBT may override standard boost values */ dp_iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level; hdmi_iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level; if (type == INTEL_OUTPUT_DP) { if (dp_iboost) { iboost = dp_iboost; } else { ddi_translations = skl_get_buf_trans_dp(dev_priv, &n_entries); iboost = ddi_translations[level].i_boost; } } else if (type == INTEL_OUTPUT_EDP) { if (dp_iboost) { iboost = dp_iboost; } else { ddi_translations = skl_get_buf_trans_edp(dev_priv, &n_entries); if (WARN_ON(port != PORT_A && port != PORT_E && n_entries > 9)) n_entries = 9; iboost = ddi_translations[level].i_boost; } } else if (type == INTEL_OUTPUT_HDMI) { if (hdmi_iboost) { iboost = hdmi_iboost; } else { ddi_translations = skl_get_buf_trans_hdmi(dev_priv, &n_entries); iboost = ddi_translations[level].i_boost; } } else { return; } /* Make sure that the requested I_boost is valid */ if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) { DRM_ERROR("Invalid I_boost value %u\n", iboost); return; } _skl_ddi_set_iboost(dev_priv, port, iboost); if (port == PORT_A && intel_dig_port->max_lanes == 4) _skl_ddi_set_iboost(dev_priv, PORT_E, iboost); } static void bxt_ddi_vswing_sequence(struct drm_i915_private *dev_priv, u32 level, enum port port, int type) { const struct bxt_ddi_buf_trans *ddi_translations; u32 n_entries, i; uint32_t val; if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) { n_entries = ARRAY_SIZE(bxt_ddi_translations_edp); ddi_translations = bxt_ddi_translations_edp; } else if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { n_entries = ARRAY_SIZE(bxt_ddi_translations_dp); ddi_translations = bxt_ddi_translations_dp; } else if (type == INTEL_OUTPUT_HDMI) { n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi); ddi_translations = bxt_ddi_translations_hdmi; } else { DRM_DEBUG_KMS("Vswing programming not done for encoder %d\n", type); return; } /* Check if default value has to be used */ if (level >= n_entries || (type == INTEL_OUTPUT_HDMI && level == HDMI_LEVEL_SHIFT_UNKNOWN)) { for (i = 0; i < n_entries; i++) { if (ddi_translations[i].default_index) { level = i; break; } } } /* * While we write to the group register to program all lanes at once we * can read only lane registers and we pick lanes 0/1 for that. */ val = I915_READ(BXT_PORT_PCS_DW10_LN01(port)); val &= ~(TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT); I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val); val = I915_READ(BXT_PORT_TX_DW2_LN0(port)); val &= ~(MARGIN_000 | UNIQ_TRANS_SCALE); val |= ddi_translations[level].margin << MARGIN_000_SHIFT | ddi_translations[level].scale << UNIQ_TRANS_SCALE_SHIFT; I915_WRITE(BXT_PORT_TX_DW2_GRP(port), val); val = I915_READ(BXT_PORT_TX_DW3_LN0(port)); val &= ~SCALE_DCOMP_METHOD; if (ddi_translations[level].enable) val |= SCALE_DCOMP_METHOD; if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD)) DRM_ERROR("Disabled scaling while ouniqetrangenmethod was set"); I915_WRITE(BXT_PORT_TX_DW3_GRP(port), val); val = I915_READ(BXT_PORT_TX_DW4_LN0(port)); val &= ~DE_EMPHASIS; val |= ddi_translations[level].deemphasis << DEEMPH_SHIFT; I915_WRITE(BXT_PORT_TX_DW4_GRP(port), val); val = I915_READ(BXT_PORT_PCS_DW10_LN01(port)); val |= TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT; I915_WRITE(BXT_PORT_PCS_DW10_GRP(port), val); } static uint32_t translate_signal_level(int signal_levels) { uint32_t level; switch (signal_levels) { default: DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level: 0x%x\n", signal_levels); case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0: level = 0; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1: level = 1; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2: level = 2; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3: level = 3; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0: level = 4; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1: level = 5; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2: level = 6; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0: level = 7; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1: level = 8; break; case DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0: level = 9; break; } return level; } uint32_t ddi_signal_levels(struct intel_dp *intel_dp) { struct intel_digital_port *dport = dp_to_dig_port(intel_dp); struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); struct intel_encoder *encoder = &dport->base; uint8_t train_set = intel_dp->train_set[0]; int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | DP_TRAIN_PRE_EMPHASIS_MASK); enum port port = dport->port; uint32_t level; level = translate_signal_level(signal_levels); if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) skl_ddi_set_iboost(encoder, level); else if (IS_BROXTON(dev_priv)) bxt_ddi_vswing_sequence(dev_priv, level, port, encoder->type); return DDI_BUF_TRANS_SELECT(level); } void intel_ddi_clk_select(struct intel_encoder *encoder, struct intel_shared_dpll *pll) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); enum port port = intel_ddi_get_encoder_port(encoder); if (WARN_ON(!pll)) return; if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { uint32_t val; /* DDI -> PLL mapping */ val = I915_READ(DPLL_CTRL2); val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) | DPLL_CTRL2_DDI_CLK_SEL_MASK(port)); val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->id, port) | DPLL_CTRL2_DDI_SEL_OVERRIDE(port)); I915_WRITE(DPLL_CTRL2, val); } else if (INTEL_INFO(dev_priv)->gen < 9) { I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll)); } } static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, int link_rate, uint32_t lane_count, struct intel_shared_dpll *pll, bool link_mst) { struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base); struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); enum port port = intel_ddi_get_encoder_port(encoder); intel_dp_set_link_params(intel_dp, link_rate, lane_count, link_mst); if (encoder->type == INTEL_OUTPUT_EDP) intel_edp_panel_on(intel_dp); intel_ddi_clk_select(encoder, pll); intel_prepare_dp_ddi_buffers(encoder); intel_ddi_init_dp_buf_reg(encoder); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) intel_dp_stop_link_train(intel_dp); } static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder, bool has_hdmi_sink, struct drm_display_mode *adjusted_mode, struct intel_shared_dpll *pll) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(&encoder->base); struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct drm_encoder *drm_encoder = &encoder->base; enum port port = intel_ddi_get_encoder_port(encoder); int level = intel_ddi_hdmi_level(dev_priv, port); intel_dp_dual_mode_set_tmds_output(intel_hdmi, true); intel_ddi_clk_select(encoder, pll); intel_prepare_hdmi_ddi_buffers(encoder); if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) skl_ddi_set_iboost(encoder, level); else if (IS_BROXTON(dev_priv)) bxt_ddi_vswing_sequence(dev_priv, level, port, INTEL_OUTPUT_HDMI); intel_hdmi->set_infoframes(drm_encoder, has_hdmi_sink, adjusted_mode); } static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_encoder *encoder = &intel_encoder->base; struct intel_crtc *crtc = to_intel_crtc(encoder->crtc); int type = intel_encoder->type; if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { intel_ddi_pre_enable_dp(intel_encoder, crtc->config->port_clock, crtc->config->lane_count, crtc->config->shared_dpll, intel_crtc_has_type(crtc->config, INTEL_OUTPUT_DP_MST)); } if (type == INTEL_OUTPUT_HDMI) { intel_ddi_pre_enable_hdmi(intel_encoder, crtc->config->has_hdmi_sink, &crtc->config->base.adjusted_mode, crtc->config->shared_dpll); } } static void intel_ddi_post_disable(struct intel_encoder *intel_encoder, struct intel_crtc_state *old_crtc_state, struct drm_connector_state *old_conn_state) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; uint32_t val; bool wait = false; /* old_crtc_state and old_conn_state are NULL when called from DP_MST */ val = I915_READ(DDI_BUF_CTL(port)); if (val & DDI_BUF_CTL_ENABLE) { val &= ~DDI_BUF_CTL_ENABLE; I915_WRITE(DDI_BUF_CTL(port), val); wait = true; } val = I915_READ(DP_TP_CTL(port)); val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); val |= DP_TP_CTL_LINK_TRAIN_PAT1; I915_WRITE(DP_TP_CTL(port), val); if (wait) intel_wait_ddi_buf_idle(dev_priv, port); if (type == INTEL_OUTPUT_DP || type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); intel_edp_panel_vdd_on(intel_dp); intel_edp_panel_off(intel_dp); } if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) I915_WRITE(DPLL_CTRL2, (I915_READ(DPLL_CTRL2) | DPLL_CTRL2_DDI_CLK_OFF(port))); else if (INTEL_INFO(dev)->gen < 9) I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE); if (type == INTEL_OUTPUT_HDMI) { struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder); intel_dp_dual_mode_set_tmds_output(intel_hdmi, false); } } void intel_ddi_fdi_post_disable(struct intel_encoder *intel_encoder, struct intel_crtc_state *old_crtc_state, struct drm_connector_state *old_conn_state) { struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); uint32_t val; /* * Bspec lists this as both step 13 (before DDI_BUF_CTL disable) * and step 18 (after clearing PORT_CLK_SEL). Based on a BUN, * step 13 is the correct place for it. Step 18 is where it was * originally before the BUN. */ val = I915_READ(FDI_RX_CTL(PIPE_A)); val &= ~FDI_RX_ENABLE; I915_WRITE(FDI_RX_CTL(PIPE_A), val); intel_ddi_post_disable(intel_encoder, old_crtc_state, old_conn_state); val = I915_READ(FDI_RX_MISC(PIPE_A)); val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK); val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2); I915_WRITE(FDI_RX_MISC(PIPE_A), val); val = I915_READ(FDI_RX_CTL(PIPE_A)); val &= ~FDI_PCDCLK; I915_WRITE(FDI_RX_CTL(PIPE_A), val); val = I915_READ(FDI_RX_CTL(PIPE_A)); val &= ~FDI_RX_PLL_ENABLE; I915_WRITE(FDI_RX_CTL(PIPE_A), val); } static void intel_enable_ddi(struct intel_encoder *intel_encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = encoder->crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_ddi_get_encoder_port(intel_encoder); int type = intel_encoder->type; if (type == INTEL_OUTPUT_HDMI) { struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); /* In HDMI/DVI mode, the port width, and swing/emphasis values * are ignored so nothing special needs to be done besides * enabling the port. */ I915_WRITE(DDI_BUF_CTL(port), intel_dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE); } else if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); if (port == PORT_A && INTEL_INFO(dev)->gen < 9) intel_dp_stop_link_train(intel_dp); intel_edp_backlight_on(intel_dp); intel_psr_enable(intel_dp); intel_edp_drrs_enable(intel_dp, pipe_config); } if (intel_crtc->config->has_audio) { intel_display_power_get(dev_priv, POWER_DOMAIN_AUDIO); intel_audio_codec_enable(intel_encoder); } } static void intel_disable_ddi(struct intel_encoder *intel_encoder, struct intel_crtc_state *old_crtc_state, struct drm_connector_state *old_conn_state) { struct drm_encoder *encoder = &intel_encoder->base; struct drm_crtc *crtc = encoder->crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int type = intel_encoder->type; struct drm_device *dev = encoder->dev; struct drm_i915_private *dev_priv = to_i915(dev); if (intel_crtc->config->has_audio) { intel_audio_codec_disable(intel_encoder); intel_display_power_put(dev_priv, POWER_DOMAIN_AUDIO); } if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); intel_edp_drrs_disable(intel_dp, old_crtc_state); intel_psr_disable(intel_dp); intel_edp_backlight_off(intel_dp); } } bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv, enum dpio_phy phy) { enum port port; if (!(I915_READ(BXT_P_CR_GT_DISP_PWRON) & GT_DISPLAY_POWER_ON(phy))) return false; if ((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & (PHY_POWER_GOOD | PHY_RESERVED)) != PHY_POWER_GOOD) { DRM_DEBUG_DRIVER("DDI PHY %d powered, but power hasn't settled\n", phy); return false; } if (phy == DPIO_PHY1 && !(I915_READ(BXT_PORT_REF_DW3(DPIO_PHY1)) & GRC_DONE)) { DRM_DEBUG_DRIVER("DDI PHY 1 powered, but GRC isn't done\n"); return false; } if (!(I915_READ(BXT_PHY_CTL_FAMILY(phy)) & COMMON_RESET_DIS)) { DRM_DEBUG_DRIVER("DDI PHY %d powered, but still in reset\n", phy); return false; } for_each_port_masked(port, phy == DPIO_PHY0 ? BIT(PORT_B) | BIT(PORT_C) : BIT(PORT_A)) { u32 tmp = I915_READ(BXT_PHY_CTL(port)); if (tmp & BXT_PHY_CMNLANE_POWERDOWN_ACK) { DRM_DEBUG_DRIVER("DDI PHY %d powered, but common lane " "for port %c powered down " "(PHY_CTL %08x)\n", phy, port_name(port), tmp); return false; } } return true; } static u32 bxt_get_grc(struct drm_i915_private *dev_priv, enum dpio_phy phy) { u32 val = I915_READ(BXT_PORT_REF_DW6(phy)); return (val & GRC_CODE_MASK) >> GRC_CODE_SHIFT; } static void bxt_phy_wait_grc_done(struct drm_i915_private *dev_priv, enum dpio_phy phy) { if (intel_wait_for_register(dev_priv, BXT_PORT_REF_DW3(phy), GRC_DONE, GRC_DONE, 10)) DRM_ERROR("timeout waiting for PHY%d GRC\n", phy); } void bxt_ddi_phy_init(struct drm_i915_private *dev_priv, enum dpio_phy phy) { u32 val; if (bxt_ddi_phy_is_enabled(dev_priv, phy)) { /* Still read out the GRC value for state verification */ if (phy == DPIO_PHY0) dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, phy); if (bxt_ddi_phy_verify_state(dev_priv, phy)) { DRM_DEBUG_DRIVER("DDI PHY %d already enabled, " "won't reprogram it\n", phy); return; } DRM_DEBUG_DRIVER("DDI PHY %d enabled with invalid state, " "force reprogramming it\n", phy); } val = I915_READ(BXT_P_CR_GT_DISP_PWRON); val |= GT_DISPLAY_POWER_ON(phy); I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); /* * The PHY registers start out inaccessible and respond to reads with * all 1s. Eventually they become accessible as they power up, then * the reserved bit will give the default 0. Poll on the reserved bit * becoming 0 to find when the PHY is accessible. * HW team confirmed that the time to reach phypowergood status is * anywhere between 50 us and 100us. */ if (wait_for_us(((I915_READ(BXT_PORT_CL1CM_DW0(phy)) & (PHY_RESERVED | PHY_POWER_GOOD)) == PHY_POWER_GOOD), 100)) { DRM_ERROR("timeout during PHY%d power on\n", phy); } /* Program PLL Rcomp code offset */ val = I915_READ(BXT_PORT_CL1CM_DW9(phy)); val &= ~IREF0RC_OFFSET_MASK; val |= 0xE4 << IREF0RC_OFFSET_SHIFT; I915_WRITE(BXT_PORT_CL1CM_DW9(phy), val); val = I915_READ(BXT_PORT_CL1CM_DW10(phy)); val &= ~IREF1RC_OFFSET_MASK; val |= 0xE4 << IREF1RC_OFFSET_SHIFT; I915_WRITE(BXT_PORT_CL1CM_DW10(phy), val); /* Program power gating */ val = I915_READ(BXT_PORT_CL1CM_DW28(phy)); val |= OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; I915_WRITE(BXT_PORT_CL1CM_DW28(phy), val); if (phy == DPIO_PHY0) { val = I915_READ(BXT_PORT_CL2CM_DW6_BC); val |= DW6_OLDO_DYN_PWR_DOWN_EN; I915_WRITE(BXT_PORT_CL2CM_DW6_BC, val); } val = I915_READ(BXT_PORT_CL1CM_DW30(phy)); val &= ~OCL2_LDOFUSE_PWR_DIS; /* * On PHY1 disable power on the second channel, since no port is * connected there. On PHY0 both channels have a port, so leave it * enabled. * TODO: port C is only connected on BXT-P, so on BXT0/1 we should * power down the second channel on PHY0 as well. * * FIXME: Clarify programming of the following, the register is * read-only with bit 6 fixed at 0 at least in stepping A. */ if (phy == DPIO_PHY1) val |= OCL2_LDOFUSE_PWR_DIS; I915_WRITE(BXT_PORT_CL1CM_DW30(phy), val); if (phy == DPIO_PHY0) { uint32_t grc_code; /* * PHY0 isn't connected to an RCOMP resistor so copy over * the corresponding calibrated value from PHY1, and disable * the automatic calibration on PHY0. */ val = dev_priv->bxt_phy_grc = bxt_get_grc(dev_priv, DPIO_PHY1); grc_code = val << GRC_CODE_FAST_SHIFT | val << GRC_CODE_SLOW_SHIFT | val; I915_WRITE(BXT_PORT_REF_DW6(DPIO_PHY0), grc_code); val = I915_READ(BXT_PORT_REF_DW8(DPIO_PHY0)); val |= GRC_DIS | GRC_RDY_OVRD; I915_WRITE(BXT_PORT_REF_DW8(DPIO_PHY0), val); } val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); val |= COMMON_RESET_DIS; I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); if (phy == DPIO_PHY1) bxt_phy_wait_grc_done(dev_priv, DPIO_PHY1); } void bxt_ddi_phy_uninit(struct drm_i915_private *dev_priv, enum dpio_phy phy) { uint32_t val; val = I915_READ(BXT_PHY_CTL_FAMILY(phy)); val &= ~COMMON_RESET_DIS; I915_WRITE(BXT_PHY_CTL_FAMILY(phy), val); val = I915_READ(BXT_P_CR_GT_DISP_PWRON); val &= ~GT_DISPLAY_POWER_ON(phy); I915_WRITE(BXT_P_CR_GT_DISP_PWRON, val); } static bool __printf(6, 7) __phy_reg_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy, i915_reg_t reg, u32 mask, u32 expected, const char *reg_fmt, ...) { struct va_format vaf; va_list args; u32 val; val = I915_READ(reg); if ((val & mask) == expected) return true; va_start(args, reg_fmt); vaf.fmt = reg_fmt; vaf.va = &args; DRM_DEBUG_DRIVER("DDI PHY %d reg %pV [%08x] state mismatch: " "current %08x, expected %08x (mask %08x)\n", phy, &vaf, reg.reg, val, (val & ~mask) | expected, mask); va_end(args); return false; } bool bxt_ddi_phy_verify_state(struct drm_i915_private *dev_priv, enum dpio_phy phy) { uint32_t mask; bool ok; #define _CHK(reg, mask, exp, fmt, ...) \ __phy_reg_verify_state(dev_priv, phy, reg, mask, exp, fmt, \ ## __VA_ARGS__) if (!bxt_ddi_phy_is_enabled(dev_priv, phy)) return false; ok = true; /* PLL Rcomp code offset */ ok &= _CHK(BXT_PORT_CL1CM_DW9(phy), IREF0RC_OFFSET_MASK, 0xe4 << IREF0RC_OFFSET_SHIFT, "BXT_PORT_CL1CM_DW9(%d)", phy); ok &= _CHK(BXT_PORT_CL1CM_DW10(phy), IREF1RC_OFFSET_MASK, 0xe4 << IREF1RC_OFFSET_SHIFT, "BXT_PORT_CL1CM_DW10(%d)", phy); /* Power gating */ mask = OCL1_POWER_DOWN_EN | DW28_OLDO_DYN_PWR_DOWN_EN | SUS_CLK_CONFIG; ok &= _CHK(BXT_PORT_CL1CM_DW28(phy), mask, mask, "BXT_PORT_CL1CM_DW28(%d)", phy); if (phy == DPIO_PHY0) ok &= _CHK(BXT_PORT_CL2CM_DW6_BC, DW6_OLDO_DYN_PWR_DOWN_EN, DW6_OLDO_DYN_PWR_DOWN_EN, "BXT_PORT_CL2CM_DW6_BC"); /* * TODO: Verify BXT_PORT_CL1CM_DW30 bit OCL2_LDOFUSE_PWR_DIS, * at least on stepping A this bit is read-only and fixed at 0. */ if (phy == DPIO_PHY0) { u32 grc_code = dev_priv->bxt_phy_grc; grc_code = grc_code << GRC_CODE_FAST_SHIFT | grc_code << GRC_CODE_SLOW_SHIFT | grc_code; mask = GRC_CODE_FAST_MASK | GRC_CODE_SLOW_MASK | GRC_CODE_NOM_MASK; ok &= _CHK(BXT_PORT_REF_DW6(DPIO_PHY0), mask, grc_code, "BXT_PORT_REF_DW6(%d)", DPIO_PHY0); mask = GRC_DIS | GRC_RDY_OVRD; ok &= _CHK(BXT_PORT_REF_DW8(DPIO_PHY0), mask, mask, "BXT_PORT_REF_DW8(%d)", DPIO_PHY0); } return ok; #undef _CHK } static uint8_t bxt_ddi_phy_calc_lane_lat_optim_mask(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { switch (pipe_config->lane_count) { case 1: return 0; case 2: return BIT(2) | BIT(0); case 4: return BIT(3) | BIT(2) | BIT(0); default: MISSING_CASE(pipe_config->lane_count); return 0; } } static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); enum port port = dport->port; struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); int lane; for (lane = 0; lane < 4; lane++) { u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); /* * Note that on CHV this flag is called UPAR, but has * the same function. */ val &= ~LATENCY_OPTIM; if (intel_crtc->config->lane_lat_optim_mask & BIT(lane)) val |= LATENCY_OPTIM; I915_WRITE(BXT_PORT_TX_DW14_LN(port, lane), val); } } static uint8_t bxt_ddi_phy_get_lane_lat_optim_mask(struct intel_encoder *encoder) { struct intel_digital_port *dport = enc_to_dig_port(&encoder->base); struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev); enum port port = dport->port; int lane; uint8_t mask; mask = 0; for (lane = 0; lane < 4; lane++) { u32 val = I915_READ(BXT_PORT_TX_DW14_LN(port, lane)); if (val & LATENCY_OPTIM) mask |= BIT(lane); } return mask; } void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp) { struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev); enum port port = intel_dig_port->port; uint32_t val; bool wait = false; if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) { val = I915_READ(DDI_BUF_CTL(port)); if (val & DDI_BUF_CTL_ENABLE) { val &= ~DDI_BUF_CTL_ENABLE; I915_WRITE(DDI_BUF_CTL(port), val); wait = true; } val = I915_READ(DP_TP_CTL(port)); val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK); val |= DP_TP_CTL_LINK_TRAIN_PAT1; I915_WRITE(DP_TP_CTL(port), val); POSTING_READ(DP_TP_CTL(port)); if (wait) intel_wait_ddi_buf_idle(dev_priv, port); } val = DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE; if (intel_dp->link_mst) val |= DP_TP_CTL_MODE_MST; else { val |= DP_TP_CTL_MODE_SST; if (drm_dp_enhanced_frame_cap(intel_dp->dpcd)) val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE; } I915_WRITE(DP_TP_CTL(port), val); POSTING_READ(DP_TP_CTL(port)); intel_dp->DP |= DDI_BUF_CTL_ENABLE; I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP); POSTING_READ(DDI_BUF_CTL(port)); udelay(600); } bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv, struct intel_crtc *intel_crtc) { u32 temp; if (intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO)) { temp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); if (temp & AUDIO_OUTPUT_ENABLE(intel_crtc->pipe)) return true; } return false; } void intel_ddi_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; struct intel_hdmi *intel_hdmi; u32 temp, flags = 0; /* XXX: DSI transcoder paranoia */ if (WARN_ON(transcoder_is_dsi(cpu_transcoder))) return; temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); if (temp & TRANS_DDI_PHSYNC) flags |= DRM_MODE_FLAG_PHSYNC; else flags |= DRM_MODE_FLAG_NHSYNC; if (temp & TRANS_DDI_PVSYNC) flags |= DRM_MODE_FLAG_PVSYNC; else flags |= DRM_MODE_FLAG_NVSYNC; pipe_config->base.adjusted_mode.flags |= flags; switch (temp & TRANS_DDI_BPC_MASK) { case TRANS_DDI_BPC_6: pipe_config->pipe_bpp = 18; break; case TRANS_DDI_BPC_8: pipe_config->pipe_bpp = 24; break; case TRANS_DDI_BPC_10: pipe_config->pipe_bpp = 30; break; case TRANS_DDI_BPC_12: pipe_config->pipe_bpp = 36; break; default: break; } switch (temp & TRANS_DDI_MODE_SELECT_MASK) { case TRANS_DDI_MODE_SELECT_HDMI: pipe_config->has_hdmi_sink = true; intel_hdmi = enc_to_intel_hdmi(&encoder->base); if (intel_hdmi->infoframe_enabled(&encoder->base, pipe_config)) pipe_config->has_infoframe = true; /* fall through */ case TRANS_DDI_MODE_SELECT_DVI: pipe_config->lane_count = 4; break; case TRANS_DDI_MODE_SELECT_FDI: break; case TRANS_DDI_MODE_SELECT_DP_SST: case TRANS_DDI_MODE_SELECT_DP_MST: pipe_config->lane_count = ((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1; intel_dp_get_m_n(intel_crtc, pipe_config); break; default: break; } pipe_config->has_audio = intel_ddi_is_audio_enabled(dev_priv, intel_crtc); if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp && pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) { /* * This is a big fat ugly hack. * * Some machines in UEFI boot mode provide us a VBT that has 18 * bpp and 1.62 GHz link bandwidth for eDP, which for reasons * unknown we fail to light up. Yet the same BIOS boots up with * 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as * max, not what it tells us to use. * * Note: This will still be broken if the eDP panel is not lit * up by the BIOS, and thus we can't get the mode at module * load. */ DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n", pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp); dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp; } intel_ddi_clock_get(encoder, pipe_config); if (IS_BROXTON(dev_priv)) pipe_config->lane_lat_optim_mask = bxt_ddi_phy_get_lane_lat_optim_mask(encoder); } static bool intel_ddi_compute_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); int type = encoder->type; int port = intel_ddi_get_encoder_port(encoder); int ret; WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); if (port == PORT_A) pipe_config->cpu_transcoder = TRANSCODER_EDP; if (type == INTEL_OUTPUT_HDMI) ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state); else ret = intel_dp_compute_config(encoder, pipe_config, conn_state); if (IS_BROXTON(dev_priv) && ret) pipe_config->lane_lat_optim_mask = bxt_ddi_phy_calc_lane_lat_optim_mask(encoder, pipe_config); return ret; } static const struct drm_encoder_funcs intel_ddi_funcs = { .reset = intel_dp_encoder_reset, .destroy = intel_dp_encoder_destroy, }; static struct intel_connector * intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port) { struct intel_connector *connector; enum port port = intel_dig_port->port; connector = intel_connector_alloc(); if (!connector) return NULL; intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); if (!intel_dp_init_connector(intel_dig_port, connector)) { kfree(connector); return NULL; } return connector; } static struct intel_connector * intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port) { struct intel_connector *connector; enum port port = intel_dig_port->port; connector = intel_connector_alloc(); if (!connector) return NULL; intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); intel_hdmi_init_connector(intel_dig_port, connector); return connector; } struct intel_shared_dpll * intel_ddi_get_link_dpll(struct intel_dp *intel_dp, int clock) { struct intel_connector *connector = intel_dp->attached_connector; struct intel_encoder *encoder = connector->encoder; struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); struct intel_shared_dpll *pll = NULL; struct intel_shared_dpll_config tmp_pll_config; enum intel_dpll_id dpll_id; if (IS_BROXTON(dev_priv)) { dpll_id = (enum intel_dpll_id)dig_port->port; /* * Select the required PLL. This works for platforms where * there is no shared DPLL. */ pll = &dev_priv->shared_dplls[dpll_id]; if (WARN_ON(pll->active_mask)) { DRM_ERROR("Shared DPLL in use. active_mask:%x\n", pll->active_mask); return NULL; } tmp_pll_config = pll->config; if (!bxt_ddi_dp_set_dpll_hw_state(clock, &pll->config.hw_state)) { DRM_ERROR("Could not setup DPLL\n"); pll->config = tmp_pll_config; return NULL; } } else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) { pll = skl_find_link_pll(dev_priv, clock); } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) { pll = hsw_ddi_dp_get_dpll(encoder, clock); } return pll; } void intel_ddi_init(struct drm_device *dev, enum port port) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_digital_port *intel_dig_port; struct intel_encoder *intel_encoder; struct drm_encoder *encoder; bool init_hdmi, init_dp; int max_lanes; if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES) { switch (port) { case PORT_A: max_lanes = 4; break; case PORT_E: max_lanes = 0; break; default: max_lanes = 4; break; } } else { switch (port) { case PORT_A: max_lanes = 2; break; case PORT_E: max_lanes = 2; break; default: max_lanes = 4; break; } } init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi || dev_priv->vbt.ddi_port_info[port].supports_hdmi); init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp; if (!init_dp && !init_hdmi) { DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n", port_name(port)); return; } intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL); if (!intel_dig_port) return; intel_encoder = &intel_dig_port->base; encoder = &intel_encoder->base; drm_encoder_init(dev, encoder, &intel_ddi_funcs, DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port)); intel_encoder->compute_config = intel_ddi_compute_config; intel_encoder->enable = intel_enable_ddi; if (IS_BROXTON(dev_priv)) intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable; intel_encoder->pre_enable = intel_ddi_pre_enable; intel_encoder->disable = intel_disable_ddi; intel_encoder->post_disable = intel_ddi_post_disable; intel_encoder->get_hw_state = intel_ddi_get_hw_state; intel_encoder->get_config = intel_ddi_get_config; intel_encoder->suspend = intel_dp_encoder_suspend; intel_dig_port->port = port; intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES); /* * Bspec says that DDI_A_4_LANES is the only supported configuration * for Broxton. Yet some BIOS fail to set this bit on port A if eDP * wasn't lit up at boot. Force this bit on in our internal * configuration so that we use the proper lane count for our * calculations. */ if (IS_BROXTON(dev) && port == PORT_A) { if (!(intel_dig_port->saved_port_bits & DDI_A_4_LANES)) { DRM_DEBUG_KMS("BXT BIOS forgot to set DDI_A_4_LANES for port A; fixing\n"); intel_dig_port->saved_port_bits |= DDI_A_4_LANES; max_lanes = 4; } } intel_dig_port->max_lanes = max_lanes; intel_encoder->type = INTEL_OUTPUT_UNKNOWN; intel_encoder->port = port; intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); intel_encoder->cloneable = 0; if (init_dp) { if (!intel_ddi_init_dp_connector(intel_dig_port)) goto err; intel_dig_port->hpd_pulse = intel_dp_hpd_pulse; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. */ if (IS_BXT_REVID(dev, 0, BXT_REVID_A1) && port == PORT_B) dev_priv->hotplug.irq_port[PORT_A] = intel_dig_port; else dev_priv->hotplug.irq_port[port] = intel_dig_port; } /* In theory we don't need the encoder->type check, but leave it just in * case we have some really bad VBTs... */ if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) { if (!intel_ddi_init_hdmi_connector(intel_dig_port)) goto err; } return; err: drm_encoder_cleanup(encoder); kfree(intel_dig_port); }