/*====================================================================== Aironet driver for 4500 and 4800 series cards This code is released under both the GPL version 2 and BSD licenses. Either license may be used. The respective licenses are found at the end of this file. This code was developed by Benjamin Reed including portions of which come from the Aironet PC4500 Developer's Reference Manual and used with permission. Copyright (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use code in the Developer's manual was granted for this driver by Aironet. In addition this module was derived from dummy_cs. The initial developer of dummy_cs is David A. Hinds . Portions created by David A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights Reserved. ======================================================================*/ #ifdef __IN_PCMCIA_PACKAGE__ #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include "airo.h" /*====================================================================*/ MODULE_AUTHOR("Benjamin Reed"); MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet " "cards. This is the module that links the PCMCIA card " "with the airo module."); MODULE_LICENSE("Dual BSD/GPL"); MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ /* The event() function is this driver's Card Services event handler. It will be called by Card Services when an appropriate card status event is received. The config() and release() entry points are used to configure or release a socket, in response to card insertion and ejection events. They are invoked from the airo_cs event handler. */ static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); /* The attach() and detach() entry points are used to create and destroy "instances" of the driver, where each instance represents everything needed to manage one actual PCMCIA card. */ static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; /*====================================================================== airo_attach() creates an "instance" of the driver, allocating local data structures for one device. The device is registered with Card Services. The dev_link structure is initialized, but we don't actually configure the card at this point -- we wait until we receive a card insertion event. ======================================================================*/ static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "airo_attach()\n"); /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { printk(KERN_ERR "airo_cs: no memory for new device\n"); return -ENOMEM; } p_dev->priv = local; return airo_config(p_dev); } /* airo_attach */ /*====================================================================== This deletes a driver "instance". The device is de-registered with Card Services. If it has been released, all local data structures are freed. Otherwise, the structures will be freed when the device is released. ======================================================================*/ static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); airo_release(link); if (((local_info_t *)link->priv)->eth_dev) { stop_airo_card(((local_info_t *)link->priv)->eth_dev, 0); } ((local_info_t *)link->priv)->eth_dev = NULL; kfree(link->priv); } /* airo_detach */ /*====================================================================== airo_config() is scheduled to run after a CARD_INSERTION event is received, to configure the PCMCIA socket, and to make the device available to the system. ======================================================================*/ static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { if (p_dev->config_index == 0) return -EINVAL; return pcmcia_request_io(p_dev); } static int airo_config(struct pcmcia_device *link) { local_info_t *dev; int ret; dev = link->priv; dev_dbg(&link->dev, "airo_config\n"); link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; /* * In this loop, we scan the CIS for configuration table * entries, each of which describes a valid card * configuration, including voltage, IO window, memory window, * and interrupt settings. * * We make no assumptions about the card to be configured: we * use just the information available in the CIS. In an ideal * world, this would work for any PCMCIA card, but it requires * a complete and accurate CIS. In practice, a driver usually * "knows" most of these things without consulting the CIS, * and most client drivers will only use the CIS to fill in * implementation-defined details. */ ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; if (!link->irq) goto failed; /* This actually configures the PCMCIA socket -- setting up the I/O windows and the interrupt mapping, and putting the card and host interface into "Memory and IO" mode. */ ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = init_airo_card(link->irq, link->resource[0]->start, 1, &link->dev); if (!((local_info_t *)link->priv)->eth_dev) goto failed; return 0; failed: airo_release(link); return -ENODEV; } /* airo_config */ /*====================================================================== After a card is removed, airo_release() will unregister the device, and release the PCMCIA configuration. If the device is still open, this will be postponed until it is closed. ======================================================================*/ static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); pcmcia_disable_device(link); } static int airo_suspend(struct pcmcia_device *link) { local_info_t *local = link->priv; netif_device_detach(local->eth_dev); return 0; } static int airo_resume(struct pcmcia_device *link) { local_info_t *local = link->priv; if (link->open) { reset_airo_card(local->eth_dev); netif_device_attach(local->eth_dev); } return 0; } static struct pcmcia_device_id airo_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a), PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005), PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0007), PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0007), PCMCIA_DEVICE_NULL, }; MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, .suspend = airo_suspend, .resume = airo_resume, }; static int airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } static void airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } /* This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. In addition: Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ module_init(airo_cs_init); module_exit(airo_cs_cleanup);