/* zd_mac.c * * Copyright (c) 2007 Luis R. Rodriguez * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include #include #include #include #include "zd_def.h" #include "zd_chip.h" #include "zd_mac.h" #include "zd_ieee80211.h" #include "zd_rf.h" /* This table contains the hardware specific values for the modulation rates. */ static const struct ieee80211_rate zd_rates[] = { { .rate = 10, .val = ZD_CCK_RATE_1M, .flags = IEEE80211_RATE_CCK }, { .rate = 20, .val = ZD_CCK_RATE_2M, .val2 = ZD_CCK_RATE_2M | ZD_CCK_PREA_SHORT, .flags = IEEE80211_RATE_CCK_2 }, { .rate = 55, .val = ZD_CCK_RATE_5_5M, .val2 = ZD_CCK_RATE_5_5M | ZD_CCK_PREA_SHORT, .flags = IEEE80211_RATE_CCK_2 }, { .rate = 110, .val = ZD_CCK_RATE_11M, .val2 = ZD_CCK_RATE_11M | ZD_CCK_PREA_SHORT, .flags = IEEE80211_RATE_CCK_2 }, { .rate = 60, .val = ZD_OFDM_RATE_6M, .flags = IEEE80211_RATE_OFDM }, { .rate = 90, .val = ZD_OFDM_RATE_9M, .flags = IEEE80211_RATE_OFDM }, { .rate = 120, .val = ZD_OFDM_RATE_12M, .flags = IEEE80211_RATE_OFDM }, { .rate = 180, .val = ZD_OFDM_RATE_18M, .flags = IEEE80211_RATE_OFDM }, { .rate = 240, .val = ZD_OFDM_RATE_24M, .flags = IEEE80211_RATE_OFDM }, { .rate = 360, .val = ZD_OFDM_RATE_36M, .flags = IEEE80211_RATE_OFDM }, { .rate = 480, .val = ZD_OFDM_RATE_48M, .flags = IEEE80211_RATE_OFDM }, { .rate = 540, .val = ZD_OFDM_RATE_54M, .flags = IEEE80211_RATE_OFDM }, }; static const struct ieee80211_channel zd_channels[] = { { .chan = 1, .freq = 2412}, { .chan = 2, .freq = 2417}, { .chan = 3, .freq = 2422}, { .chan = 4, .freq = 2427}, { .chan = 5, .freq = 2432}, { .chan = 6, .freq = 2437}, { .chan = 7, .freq = 2442}, { .chan = 8, .freq = 2447}, { .chan = 9, .freq = 2452}, { .chan = 10, .freq = 2457}, { .chan = 11, .freq = 2462}, { .chan = 12, .freq = 2467}, { .chan = 13, .freq = 2472}, { .chan = 14, .freq = 2484} }; static void housekeeping_init(struct zd_mac *mac); static void housekeeping_enable(struct zd_mac *mac); static void housekeeping_disable(struct zd_mac *mac); int zd_mac_preinit_hw(struct ieee80211_hw *hw) { int r; u8 addr[ETH_ALEN]; struct zd_mac *mac = zd_hw_mac(hw); r = zd_chip_read_mac_addr_fw(&mac->chip, addr); if (r) return r; SET_IEEE80211_PERM_ADDR(hw, addr); return 0; } int zd_mac_init_hw(struct ieee80211_hw *hw) { int r; struct zd_mac *mac = zd_hw_mac(hw); struct zd_chip *chip = &mac->chip; u8 default_regdomain; r = zd_chip_enable_int(chip); if (r) goto out; r = zd_chip_init_hw(chip); if (r) goto disable_int; ZD_ASSERT(!irqs_disabled()); r = zd_read_regdomain(chip, &default_regdomain); if (r) goto disable_int; spin_lock_irq(&mac->lock); mac->regdomain = mac->default_regdomain = default_regdomain; spin_unlock_irq(&mac->lock); /* We must inform the device that we are doing encryption/decryption in * software at the moment. */ r = zd_set_encryption_type(chip, ENC_SNIFFER); if (r) goto disable_int; zd_geo_init(hw, mac->regdomain); r = 0; disable_int: zd_chip_disable_int(chip); out: return r; } void zd_mac_clear(struct zd_mac *mac) { flush_workqueue(zd_workqueue); zd_chip_clear(&mac->chip); ZD_ASSERT(!spin_is_locked(&mac->lock)); ZD_MEMCLEAR(mac, sizeof(struct zd_mac)); } static int set_rx_filter(struct zd_mac *mac) { unsigned long flags; u32 filter = STA_RX_FILTER; spin_lock_irqsave(&mac->lock, flags); if (mac->pass_ctrl) filter |= RX_FILTER_CTRL; spin_unlock_irqrestore(&mac->lock, flags); return zd_iowrite32(&mac->chip, CR_RX_FILTER, filter); } static int set_mc_hash(struct zd_mac *mac) { struct zd_mc_hash hash; zd_mc_clear(&hash); return zd_chip_set_multicast_hash(&mac->chip, &hash); } static int zd_op_start(struct ieee80211_hw *hw) { struct zd_mac *mac = zd_hw_mac(hw); struct zd_chip *chip = &mac->chip; struct zd_usb *usb = &chip->usb; int r; if (!usb->initialized) { r = zd_usb_init_hw(usb); if (r) goto out; } r = zd_chip_enable_int(chip); if (r < 0) goto out; r = zd_chip_set_basic_rates(chip, CR_RATES_80211B | CR_RATES_80211G); if (r < 0) goto disable_int; r = set_rx_filter(mac); if (r) goto disable_int; r = set_mc_hash(mac); if (r) goto disable_int; r = zd_chip_switch_radio_on(chip); if (r < 0) goto disable_int; r = zd_chip_enable_rxtx(chip); if (r < 0) goto disable_radio; r = zd_chip_enable_hwint(chip); if (r < 0) goto disable_rxtx; housekeeping_enable(mac); return 0; disable_rxtx: zd_chip_disable_rxtx(chip); disable_radio: zd_chip_switch_radio_off(chip); disable_int: zd_chip_disable_int(chip); out: return r; } /** * clear_tx_skb_control_block - clears the control block of tx skbuffs * @skb: a &struct sk_buff pointer * * This clears the control block of skbuff buffers, which were transmitted to * the device. Notify that the function is not thread-safe, so prevent * multiple calls. */ static void clear_tx_skb_control_block(struct sk_buff *skb) { struct zd_tx_skb_control_block *cb = (struct zd_tx_skb_control_block *)skb->cb; kfree(cb->control); cb->control = NULL; } /** * kfree_tx_skb - frees a tx skbuff * @skb: a &struct sk_buff pointer * * Frees the tx skbuff. Frees also the allocated control structure in the * control block if necessary. */ static void kfree_tx_skb(struct sk_buff *skb) { clear_tx_skb_control_block(skb); dev_kfree_skb_any(skb); } static void zd_op_stop(struct ieee80211_hw *hw) { struct zd_mac *mac = zd_hw_mac(hw); struct zd_chip *chip = &mac->chip; struct sk_buff *skb; struct sk_buff_head *ack_wait_queue = &mac->ack_wait_queue; /* The order here deliberately is a little different from the open() * method, since we need to make sure there is no opportunity for RX * frames to be processed by mac80211 after we have stopped it. */ zd_chip_disable_rxtx(chip); housekeeping_disable(mac); flush_workqueue(zd_workqueue); zd_chip_disable_hwint(chip); zd_chip_switch_radio_off(chip); zd_chip_disable_int(chip); while ((skb = skb_dequeue(ack_wait_queue))) kfree_tx_skb(skb); } /** * init_tx_skb_control_block - initializes skb control block * @skb: a &sk_buff pointer * @dev: pointer to the mac80221 device * @control: mac80211 tx control applying for the frame in @skb * * Initializes the control block of the skbuff to be transmitted. */ static int init_tx_skb_control_block(struct sk_buff *skb, struct ieee80211_hw *hw, struct ieee80211_tx_control *control) { struct zd_tx_skb_control_block *cb = (struct zd_tx_skb_control_block *)skb->cb; ZD_ASSERT(sizeof(*cb) <= sizeof(skb->cb)); memset(cb, 0, sizeof(*cb)); cb->hw= hw; cb->control = kmalloc(sizeof(*control), GFP_ATOMIC); if (cb->control == NULL) return -ENOMEM; memcpy(cb->control, control, sizeof(*control)); return 0; } /** * tx_status - reports tx status of a packet if required * @hw - a &struct ieee80211_hw pointer * @skb - a sk-buffer * @status - the tx status of the packet without control information * @success - True for successfull transmission of the frame * * This information calls ieee80211_tx_status_irqsafe() if required by the * control information. It copies the control information into the status * information. * * If no status information has been requested, the skb is freed. */ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_status *status, bool success) { struct zd_tx_skb_control_block *cb = (struct zd_tx_skb_control_block *) skb->cb; ZD_ASSERT(cb->control != NULL); memcpy(&status->control, cb->control, sizeof(status->control)); if (!success) status->excessive_retries = 1; clear_tx_skb_control_block(skb); ieee80211_tx_status_irqsafe(hw, skb, status); } /** * zd_mac_tx_failed - callback for failed frames * @dev: the mac80211 wireless device * * This function is called if a frame couldn't be succesfully be * transferred. The first frame from the tx queue, will be selected and * reported as error to the upper layers. */ void zd_mac_tx_failed(struct ieee80211_hw *hw) { struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue; struct sk_buff *skb; struct ieee80211_tx_status status = {{0}}; skb = skb_dequeue(q); if (skb == NULL) return; tx_status(hw, skb, &status, 0); } /** * zd_mac_tx_to_dev - callback for USB layer * @skb: a &sk_buff pointer * @error: error value, 0 if transmission successful * * Informs the MAC layer that the frame has successfully transferred to the * device. If an ACK is required and the transfer to the device has been * successful, the packets are put on the @ack_wait_queue with * the control set removed. */ void zd_mac_tx_to_dev(struct sk_buff *skb, int error) { struct zd_tx_skb_control_block *cb = (struct zd_tx_skb_control_block *)skb->cb; struct ieee80211_hw *hw = cb->hw; if (likely(cb->control)) { skb_pull(skb, sizeof(struct zd_ctrlset)); if (unlikely(error || (cb->control->flags & IEEE80211_TXCTL_NO_ACK))) { struct ieee80211_tx_status status = {{0}}; tx_status(hw, skb, &status, !error); } else { struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue; skb_queue_tail(q, skb); while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) zd_mac_tx_failed(hw); } } else { kfree_tx_skb(skb); } } static int zd_calc_tx_length_us(u8 *service, u8 zd_rate, u16 tx_length) { /* ZD_PURE_RATE() must be used to remove the modulation type flag of * the zd-rate values. */ static const u8 rate_divisor[] = { [ZD_PURE_RATE(ZD_CCK_RATE_1M)] = 1, [ZD_PURE_RATE(ZD_CCK_RATE_2M)] = 2, /* Bits must be doubled. */ [ZD_PURE_RATE(ZD_CCK_RATE_5_5M)] = 11, [ZD_PURE_RATE(ZD_CCK_RATE_11M)] = 11, [ZD_PURE_RATE(ZD_OFDM_RATE_6M)] = 6, [ZD_PURE_RATE(ZD_OFDM_RATE_9M)] = 9, [ZD_PURE_RATE(ZD_OFDM_RATE_12M)] = 12, [ZD_PURE_RATE(ZD_OFDM_RATE_18M)] = 18, [ZD_PURE_RATE(ZD_OFDM_RATE_24M)] = 24, [ZD_PURE_RATE(ZD_OFDM_RATE_36M)] = 36, [ZD_PURE_RATE(ZD_OFDM_RATE_48M)] = 48, [ZD_PURE_RATE(ZD_OFDM_RATE_54M)] = 54, }; u32 bits = (u32)tx_length * 8; u32 divisor; divisor = rate_divisor[ZD_PURE_RATE(zd_rate)]; if (divisor == 0) return -EINVAL; switch (zd_rate) { case ZD_CCK_RATE_5_5M: bits = (2*bits) + 10; /* round up to the next integer */ break; case ZD_CCK_RATE_11M: if (service) { u32 t = bits % 11; *service &= ~ZD_PLCP_SERVICE_LENGTH_EXTENSION; if (0 < t && t <= 3) { *service |= ZD_PLCP_SERVICE_LENGTH_EXTENSION; } } bits += 10; /* round up to the next integer */ break; } return bits/divisor; } static void cs_set_control(struct zd_mac *mac, struct zd_ctrlset *cs, struct ieee80211_hdr *header, u32 flags) { u16 fctl = le16_to_cpu(header->frame_control); /* * CONTROL TODO: * - if backoff needed, enable bit 0 * - if burst (backoff not needed) disable bit 0 */ cs->control = 0; /* First fragment */ if (flags & IEEE80211_TXCTL_FIRST_FRAGMENT) cs->control |= ZD_CS_NEED_RANDOM_BACKOFF; /* Multicast */ if (is_multicast_ether_addr(header->addr1)) cs->control |= ZD_CS_MULTICAST; /* PS-POLL */ if ((fctl & (IEEE80211_FCTL_FTYPE|IEEE80211_FCTL_STYPE)) == (IEEE80211_FTYPE_CTL|IEEE80211_STYPE_PSPOLL)) cs->control |= ZD_CS_PS_POLL_FRAME; if (flags & IEEE80211_TXCTL_USE_RTS_CTS) cs->control |= ZD_CS_RTS; if (flags & IEEE80211_TXCTL_USE_CTS_PROTECT) cs->control |= ZD_CS_SELF_CTS; /* FIXME: Management frame? */ } static int fill_ctrlset(struct zd_mac *mac, struct sk_buff *skb, struct ieee80211_tx_control *control) { int r; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; unsigned int frag_len = skb->len + FCS_LEN; unsigned int packet_length; struct zd_ctrlset *cs = (struct zd_ctrlset *) skb_push(skb, sizeof(struct zd_ctrlset)); ZD_ASSERT(frag_len <= 0xffff); cs->modulation = control->tx_rate; cs->tx_length = cpu_to_le16(frag_len); cs_set_control(mac, cs, hdr, control->flags); packet_length = frag_len + sizeof(struct zd_ctrlset) + 10; ZD_ASSERT(packet_length <= 0xffff); /* ZD1211B: Computing the length difference this way, gives us * flexibility to compute the packet length. */ cs->packet_length = cpu_to_le16(zd_chip_is_zd1211b(&mac->chip) ? packet_length - frag_len : packet_length); /* * CURRENT LENGTH: * - transmit frame length in microseconds * - seems to be derived from frame length * - see Cal_Us_Service() in zdinlinef.h * - if macp->bTxBurstEnable is enabled, then multiply by 4 * - bTxBurstEnable is never set in the vendor driver * * SERVICE: * - "for PLCP configuration" * - always 0 except in some situations at 802.11b 11M * - see line 53 of zdinlinef.h */ cs->service = 0; r = zd_calc_tx_length_us(&cs->service, ZD_RATE(cs->modulation), le16_to_cpu(cs->tx_length)); if (r < 0) return r; cs->current_length = cpu_to_le16(r); cs->next_frame_length = 0; return 0; } /** * zd_op_tx - transmits a network frame to the device * * @dev: mac80211 hardware device * @skb: socket buffer * @control: the control structure * * This function transmit an IEEE 802.11 network frame to the device. The * control block of the skbuff will be initialized. If necessary the incoming * mac80211 queues will be stopped. */ static int zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb, struct ieee80211_tx_control *control) { struct zd_mac *mac = zd_hw_mac(hw); int r; r = fill_ctrlset(mac, skb, control); if (r) return r; r = init_tx_skb_control_block(skb, hw, control); if (r) return r; r = zd_usb_tx(&mac->chip.usb, skb); if (r) { clear_tx_skb_control_block(skb); return r; } return 0; } /** * filter_ack - filters incoming packets for acknowledgements * @dev: the mac80211 device * @rx_hdr: received header * @stats: the status for the received packet * * This functions looks for ACK packets and tries to match them with the * frames in the tx queue. If a match is found the frame will be dequeued and * the upper layers is informed about the successful transmission. If * mac80211 queues have been stopped and the number of frames still to be * transmitted is low the queues will be opened again. * * Returns 1 if the frame was an ACK, 0 if it was ignored. */ static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr, struct ieee80211_rx_status *stats) { u16 fc = le16_to_cpu(rx_hdr->frame_control); struct sk_buff *skb; struct sk_buff_head *q; unsigned long flags; if ((fc & (IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) != (IEEE80211_FTYPE_CTL | IEEE80211_STYPE_ACK)) return 0; q = &zd_hw_mac(hw)->ack_wait_queue; spin_lock_irqsave(&q->lock, flags); for (skb = q->next; skb != (struct sk_buff *)q; skb = skb->next) { struct ieee80211_hdr *tx_hdr; tx_hdr = (struct ieee80211_hdr *)skb->data; if (likely(!compare_ether_addr(tx_hdr->addr2, rx_hdr->addr1))) { struct ieee80211_tx_status status = {{0}}; status.flags = IEEE80211_TX_STATUS_ACK; status.ack_signal = stats->ssi; __skb_unlink(skb, q); tx_status(hw, skb, &status, 1); goto out; } } out: spin_unlock_irqrestore(&q->lock, flags); return 1; } int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) { struct zd_mac *mac = zd_hw_mac(hw); struct ieee80211_rx_status stats; const struct rx_status *status; struct sk_buff *skb; int bad_frame = 0; if (length < ZD_PLCP_HEADER_SIZE + 10 /* IEEE80211_1ADDR_LEN */ + FCS_LEN + sizeof(struct rx_status)) return -EINVAL; memset(&stats, 0, sizeof(stats)); /* Note about pass_failed_fcs and pass_ctrl access below: * mac locking intentionally omitted here, as this is the only unlocked * reader and the only writer is configure_filter. Plus, if there were * any races accessing these variables, it wouldn't really matter. * If mac80211 ever provides a way for us to access filter flags * from outside configure_filter, we could improve on this. Also, this * situation may change once we implement some kind of DMA-into-skb * RX path. */ /* Caller has to ensure that length >= sizeof(struct rx_status). */ status = (struct rx_status *) (buffer + (length - sizeof(struct rx_status))); if (status->frame_status & ZD_RX_ERROR) { if (mac->pass_failed_fcs && (status->frame_status & ZD_RX_CRC32_ERROR)) { stats.flag |= RX_FLAG_FAILED_FCS_CRC; bad_frame = 1; } else { return -EINVAL; } } stats.channel = _zd_chip_get_channel(&mac->chip); stats.freq = zd_channels[stats.channel - 1].freq; stats.phymode = MODE_IEEE80211G; stats.ssi = status->signal_strength; stats.signal = zd_rx_qual_percent(buffer, length - sizeof(struct rx_status), status); stats.rate = zd_rx_rate(buffer, status); length -= ZD_PLCP_HEADER_SIZE + sizeof(struct rx_status); buffer += ZD_PLCP_HEADER_SIZE; /* Except for bad frames, filter each frame to see if it is an ACK, in * which case our internal TX tracking is updated. Normally we then * bail here as there's no need to pass ACKs on up to the stack, but * there is also the case where the stack has requested us to pass * control frames on up (pass_ctrl) which we must consider. */ if (!bad_frame && filter_ack(hw, (struct ieee80211_hdr *)buffer, &stats) && !mac->pass_ctrl) return 0; skb = dev_alloc_skb(length); if (skb == NULL) return -ENOMEM; memcpy(skb_put(skb, length), buffer, length); ieee80211_rx_irqsafe(hw, skb, &stats); return 0; } static int zd_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct zd_mac *mac = zd_hw_mac(hw); /* using IEEE80211_IF_TYPE_INVALID to indicate no mode selected */ if (mac->type != IEEE80211_IF_TYPE_INVALID) return -EOPNOTSUPP; switch (conf->type) { case IEEE80211_IF_TYPE_MNTR: case IEEE80211_IF_TYPE_STA: mac->type = conf->type; break; default: return -EOPNOTSUPP; } return zd_write_mac_addr(&mac->chip, conf->mac_addr); } static void zd_op_remove_interface(struct ieee80211_hw *hw, struct ieee80211_if_init_conf *conf) { struct zd_mac *mac = zd_hw_mac(hw); mac->type = IEEE80211_IF_TYPE_INVALID; zd_write_mac_addr(&mac->chip, NULL); } static int zd_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf) { struct zd_mac *mac = zd_hw_mac(hw); return zd_chip_set_channel(&mac->chip, conf->channel); } static int zd_op_config_interface(struct ieee80211_hw *hw, int if_id, struct ieee80211_if_conf *conf) { struct zd_mac *mac = zd_hw_mac(hw); spin_lock_irq(&mac->lock); mac->associated = is_valid_ether_addr(conf->bssid); spin_unlock_irq(&mac->lock); /* TODO: do hardware bssid filtering */ return 0; } static void set_multicast_hash_handler(struct work_struct *work) { struct zd_mac *mac = container_of(work, struct zd_mac, set_multicast_hash_work); struct zd_mc_hash hash; spin_lock_irq(&mac->lock); hash = mac->multicast_hash; spin_unlock_irq(&mac->lock); zd_chip_set_multicast_hash(&mac->chip, &hash); } static void set_rx_filter_handler(struct work_struct *work) { struct zd_mac *mac = container_of(work, struct zd_mac, set_rx_filter_work); int r; dev_dbg_f(zd_mac_dev(mac), "\n"); r = set_rx_filter(mac); if (r) dev_err(zd_mac_dev(mac), "set_rx_filter_handler error %d\n", r); } #define SUPPORTED_FIF_FLAGS \ (FIF_PROMISC_IN_BSS | FIF_ALLMULTI | FIF_FCSFAIL | FIF_CONTROL | \ FIF_OTHER_BSS) static void zd_op_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags, unsigned int *new_flags, int mc_count, struct dev_mc_list *mclist) { struct zd_mc_hash hash; struct zd_mac *mac = zd_hw_mac(hw); unsigned long flags; int i; /* Only deal with supported flags */ changed_flags &= SUPPORTED_FIF_FLAGS; *new_flags &= SUPPORTED_FIF_FLAGS; /* changed_flags is always populated but this driver * doesn't support all FIF flags so its possible we don't * need to do anything */ if (!changed_flags) return; if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI)) { zd_mc_add_all(&hash); } else { DECLARE_MAC_BUF(macbuf); zd_mc_clear(&hash); for (i = 0; i < mc_count; i++) { if (!mclist) break; dev_dbg_f(zd_mac_dev(mac), "mc addr %s\n", print_mac(macbuf, mclist->dmi_addr)); zd_mc_add_addr(&hash, mclist->dmi_addr); mclist = mclist->next; } } spin_lock_irqsave(&mac->lock, flags); mac->pass_failed_fcs = !!(*new_flags & FIF_FCSFAIL); mac->pass_ctrl = !!(*new_flags & FIF_CONTROL); mac->multicast_hash = hash; spin_unlock_irqrestore(&mac->lock, flags); queue_work(zd_workqueue, &mac->set_multicast_hash_work); if (changed_flags & FIF_CONTROL) queue_work(zd_workqueue, &mac->set_rx_filter_work); /* no handling required for FIF_OTHER_BSS as we don't currently * do BSSID filtering */ /* FIXME: in future it would be nice to enable the probe response * filter (so that the driver doesn't see them) until * FIF_BCN_PRBRESP_PROMISC is set. however due to atomicity here, we'd * have to schedule work to enable prbresp reception, which might * happen too late. For now we'll just listen and forward them all the * time. */ } static void set_rts_cts_work(struct work_struct *work) { struct zd_mac *mac = container_of(work, struct zd_mac, set_rts_cts_work); unsigned long flags; unsigned int short_preamble; mutex_lock(&mac->chip.mutex); spin_lock_irqsave(&mac->lock, flags); mac->updating_rts_rate = 0; short_preamble = mac->short_preamble; spin_unlock_irqrestore(&mac->lock, flags); zd_chip_set_rts_cts_rate_locked(&mac->chip, short_preamble); mutex_unlock(&mac->chip.mutex); } static void zd_op_erp_ie_changed(struct ieee80211_hw *hw, u8 changes, int cts_protection, int preamble) { struct zd_mac *mac = zd_hw_mac(hw); unsigned long flags; dev_dbg_f(zd_mac_dev(mac), "changes: %x\n", changes); if (changes & IEEE80211_ERP_CHANGE_PREAMBLE) { spin_lock_irqsave(&mac->lock, flags); mac->short_preamble = !preamble; if (!mac->updating_rts_rate) { mac->updating_rts_rate = 1; /* FIXME: should disable TX here, until work has * completed and RTS_CTS reg is updated */ queue_work(zd_workqueue, &mac->set_rts_cts_work); } spin_unlock_irqrestore(&mac->lock, flags); } } static const struct ieee80211_ops zd_ops = { .tx = zd_op_tx, .start = zd_op_start, .stop = zd_op_stop, .add_interface = zd_op_add_interface, .remove_interface = zd_op_remove_interface, .config = zd_op_config, .config_interface = zd_op_config_interface, .configure_filter = zd_op_configure_filter, .erp_ie_changed = zd_op_erp_ie_changed, }; struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf) { struct zd_mac *mac; struct ieee80211_hw *hw; int i; hw = ieee80211_alloc_hw(sizeof(struct zd_mac), &zd_ops); if (!hw) { dev_dbg_f(&intf->dev, "out of memory\n"); return NULL; } mac = zd_hw_mac(hw); memset(mac, 0, sizeof(*mac)); spin_lock_init(&mac->lock); mac->hw = hw; mac->type = IEEE80211_IF_TYPE_INVALID; memcpy(mac->channels, zd_channels, sizeof(zd_channels)); memcpy(mac->rates, zd_rates, sizeof(zd_rates)); mac->modes[0].mode = MODE_IEEE80211G; mac->modes[0].num_rates = ARRAY_SIZE(zd_rates); mac->modes[0].rates = mac->rates; mac->modes[0].num_channels = ARRAY_SIZE(zd_channels); mac->modes[0].channels = mac->channels; mac->modes[1].mode = MODE_IEEE80211B; mac->modes[1].num_rates = 4; mac->modes[1].rates = mac->rates; mac->modes[1].num_channels = ARRAY_SIZE(zd_channels); mac->modes[1].channels = mac->channels; hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_DEFAULT_REG_DOMAIN_CONFIGURED; hw->max_rssi = 100; hw->max_signal = 100; hw->queues = 1; hw->extra_tx_headroom = sizeof(struct zd_ctrlset); skb_queue_head_init(&mac->ack_wait_queue); for (i = 0; i < 2; i++) { if (ieee80211_register_hwmode(hw, &mac->modes[i])) { dev_dbg_f(&intf->dev, "cannot register hwmode\n"); ieee80211_free_hw(hw); return NULL; } } zd_chip_init(&mac->chip, hw, intf); housekeeping_init(mac); INIT_WORK(&mac->set_multicast_hash_work, set_multicast_hash_handler); INIT_WORK(&mac->set_rts_cts_work, set_rts_cts_work); INIT_WORK(&mac->set_rx_filter_work, set_rx_filter_handler); SET_IEEE80211_DEV(hw, &intf->dev); return hw; } #define LINK_LED_WORK_DELAY HZ static void link_led_handler(struct work_struct *work) { struct zd_mac *mac = container_of(work, struct zd_mac, housekeeping.link_led_work.work); struct zd_chip *chip = &mac->chip; int is_associated; int r; spin_lock_irq(&mac->lock); is_associated = mac->associated; spin_unlock_irq(&mac->lock); r = zd_chip_control_leds(chip, is_associated ? LED_ASSOCIATED : LED_SCANNING); if (r) dev_dbg_f(zd_mac_dev(mac), "zd_chip_control_leds error %d\n", r); queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, LINK_LED_WORK_DELAY); } static void housekeeping_init(struct zd_mac *mac) { INIT_DELAYED_WORK(&mac->housekeeping.link_led_work, link_led_handler); } static void housekeeping_enable(struct zd_mac *mac) { dev_dbg_f(zd_mac_dev(mac), "\n"); queue_delayed_work(zd_workqueue, &mac->housekeeping.link_led_work, 0); } static void housekeeping_disable(struct zd_mac *mac) { dev_dbg_f(zd_mac_dev(mac), "\n"); cancel_rearming_delayed_workqueue(zd_workqueue, &mac->housekeeping.link_led_work); zd_chip_control_leds(&mac->chip, LED_OFF); }