/* * asus-laptop.c - Asus Laptop Support * * * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor * Copyright (C) 2006-2007 Corentin Chary * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * * The development page for this driver is located at * http://sourceforge.net/projects/acpi4asus/ * * Credits: * Pontus Fuchs - Helper functions, cleanup * Johann Wiesner - Small compile fixes * John Belmonte - ACPI code for Toshiba laptop was a good starting point. * Eric Burghard - LED display support for W1N * Josh Green - Light Sens support * Thomas Tuttle - His first patch for led support was very helpfull * Sam Lin - GPS support */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define ASUS_LAPTOP_VERSION "0.42" #define ASUS_LAPTOP_NAME "Asus Laptop Support" #define ASUS_LAPTOP_CLASS "hotkey" #define ASUS_LAPTOP_DEVICE_NAME "Hotkey" #define ASUS_LAPTOP_FILE KBUILD_MODNAME #define ASUS_LAPTOP_PREFIX "\\_SB.ATKD." MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary"); MODULE_DESCRIPTION(ASUS_LAPTOP_NAME); MODULE_LICENSE("GPL"); /* * WAPF defines the behavior of the Fn+Fx wlan key * The significance of values is yet to be found, but * most of the time: * 0x0 will do nothing * 0x1 will allow to control the device with Fn+Fx key. * 0x4 will send an ACPI event (0x88) while pressing the Fn+Fx key * 0x5 like 0x1 or 0x4 * So, if something doesn't work as you want, just try other values =) */ static uint wapf = 1; module_param(wapf, uint, 0644); MODULE_PARM_DESC(wapf, "WAPF value"); static uint wlan_status = 1; static uint bluetooth_status = 1; module_param(wlan_status, uint, 0644); MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); module_param(bluetooth_status, uint, 0644); MODULE_PARM_DESC(bluetooth_status, "Set the wireless status on boot " "(0 = disabled, 1 = enabled, -1 = don't do anything). " "default is 1"); /* * Some events we use, same for all Asus */ #define ATKD_BR_UP 0x10 // (event & ~ATKD_BR_UP) = brightness level #define ATKD_BR_DOWN 0x20 // (event & ~ATKD_BR_DOWN) = britghness level #define ATKD_BR_MIN ATKD_BR_UP #define ATKD_BR_MAX (ATKD_BR_DOWN | 0xF) // 0x2f #define ATKD_LCD_ON 0x33 #define ATKD_LCD_OFF 0x34 /* * Known bits returned by \_SB.ATKD.HWRS */ #define WL_HWRS 0x80 #define BT_HWRS 0x100 /* * Flags for hotk status * WL_ON and BT_ON are also used for wireless_status() */ #define WL_RSTS 0x01 /* internal Wifi */ #define BT_RSTS 0x02 /* internal Bluetooth */ #define ASUS_HANDLE(object, paths...) \ static acpi_handle object##_handle = NULL; \ static char *object##_paths[] = { paths } /* LED */ #define METHOD_MLED "MLED" #define METHOD_TLED "TLED" #define METHOD_RLED "RLED" /* W1JC */ #define METHOD_PLED "PLED" /* A7J */ #define METHOD_GLED "GLED" /* G1, G2 (probably) */ /* LEDD */ #define METHOD_LEDD "SLCM" /* * Bluetooth and WLAN * WLED and BLED are not handled like other XLED, because in some dsdt * they also control the WLAN/Bluetooth device. */ #define METHOD_WLAN "WLED" #define METHOD_BLUETOOTH "BLED" #define METHOD_WL_STATUS "RSTS" /* Brightness */ #define METHOD_BRIGHTNESS_SET "SPLV" #define METHOD_BRIGHTNESS_GET "GPLV" /* Backlight */ ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */ "\\_SB.PCI0.ISA.EC0._Q10", /* A1x */ "\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */ "\\_SB.PCI0.PX40.EC0.Q10", /* M1A */ "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */ "\\_SB.PCI0.LPCB.EC0._Q0E", /* P30/P35 */ "\\_SB.PCI0.PX40.Q10", /* S1x */ "\\Q10"); /* A2x, L2D, L3D, M2E */ /* Display */ #define METHOD_SWITCH_DISPLAY "SDSP" ASUS_HANDLE(display_get, /* A6B, A6K A6R A7D F3JM L4R M6R A3G M6A M6V VX-1 V6J V6V W3Z */ "\\_SB.PCI0.P0P1.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V S5A M5A z33A W1Jc W2V G1 */ "\\_SB.PCI0.P0P2.VGA.GETD", /* A6V A6Q */ "\\_SB.PCI0.P0P3.VGA.GETD", /* A6T, A6M */ "\\_SB.PCI0.P0PA.VGA.GETD", /* L3C */ "\\_SB.PCI0.PCI1.VGAC.NMAP", /* Z96F */ "\\_SB.PCI0.VGA.GETD", /* A2D */ "\\ACTD", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */ "\\ADVG", /* P30 */ "\\DNXT", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */ "\\INFB", /* A3F A6F A3N A3L M6N W3N W6A */ "\\SSTE"); #define METHOD_ALS_CONTROL "ALSC" /* Z71A Z71V */ #define METHOD_ALS_LEVEL "ALSL" /* Z71A Z71V */ /* GPS */ /* R2H use different handle for GPS on/off */ #define METHOD_GPS_ON "SDON" #define METHOD_GPS_OFF "SDOF" #define METHOD_GPS_STATUS "GPST" /* Keyboard light */ #define METHOD_KBD_LIGHT_SET "SLKB" #define METHOD_KBD_LIGHT_GET "GLKB" /* * Define a specific led structure to keep the main structure clean */ #define ASUS_DEFINE_LED(object) \ int object##_wk; \ struct work_struct object##_work; \ struct led_classdev object; #define led_to_asus(led_cdev, led) \ container_of(container_of(led_cdev, struct asus_laptop_leds, \ led), \ struct asus_laptop, leds) #define work_to_asus(work, led) \ container_of(container_of(work, struct asus_laptop_leds, \ led##_work), \ struct asus_laptop, leds) struct asus_laptop_leds { ASUS_DEFINE_LED(mled) ASUS_DEFINE_LED(tled) ASUS_DEFINE_LED(rled) ASUS_DEFINE_LED(pled) ASUS_DEFINE_LED(gled) ASUS_DEFINE_LED(kled) struct workqueue_struct *workqueue; }; /* * This is the main structure, we can use it to store anything interesting * about the hotk device */ struct asus_laptop { char *name; /* laptop name */ struct acpi_table_header *dsdt_info; struct platform_device *platform_device; struct acpi_device *device; /* the device we are in */ struct backlight_device *backlight_device; struct input_dev *inputdev; struct key_entry *keymap; struct asus_laptop_leds leds; int wireless_status; bool have_rsts; int lcd_state; struct rfkill *gps_rfkill; acpi_handle handle; /* the handle of the hotk device */ u32 ledd_status; /* status of the LED display */ u8 light_level; /* light sensor level */ u8 light_switch; /* light sensor switch value */ u16 event_count[128]; /* count for each event TODO make this better */ u16 *keycode_map; }; static const struct key_entry asus_keymap[] = { /* Lenovo SL Specific keycodes */ {KE_KEY, 0x02, { KEY_SCREENLOCK } }, {KE_KEY, 0x05, { KEY_WLAN } }, {KE_KEY, 0x08, { KEY_F13 } }, {KE_KEY, 0x17, { KEY_ZOOM } }, {KE_KEY, 0x1f, { KEY_BATTERY } }, /* End of Lenovo SL Specific keycodes */ {KE_KEY, 0x30, { KEY_VOLUMEUP } }, {KE_KEY, 0x31, { KEY_VOLUMEDOWN } }, {KE_KEY, 0x32, { KEY_MUTE } }, {KE_KEY, 0x33, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x34, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x40, { KEY_PREVIOUSSONG } }, {KE_KEY, 0x41, { KEY_NEXTSONG } }, {KE_KEY, 0x43, { KEY_STOPCD } }, {KE_KEY, 0x45, { KEY_PLAYPAUSE } }, {KE_KEY, 0x4c, { KEY_MEDIA } }, {KE_KEY, 0x50, { KEY_EMAIL } }, {KE_KEY, 0x51, { KEY_WWW } }, {KE_KEY, 0x55, { KEY_CALC } }, {KE_KEY, 0x5C, { KEY_SCREENLOCK } }, /* Screenlock */ {KE_KEY, 0x5D, { KEY_WLAN } }, {KE_KEY, 0x5E, { KEY_WLAN } }, {KE_KEY, 0x5F, { KEY_WLAN } }, {KE_KEY, 0x60, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x61, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x62, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x63, { KEY_SWITCHVIDEOMODE } }, {KE_KEY, 0x6B, { KEY_F13 } }, /* Lock Touchpad */ {KE_KEY, 0x7E, { KEY_BLUETOOTH } }, {KE_KEY, 0x7D, { KEY_BLUETOOTH } }, {KE_KEY, 0x82, { KEY_CAMERA } }, {KE_KEY, 0x88, { KEY_WLAN } }, {KE_KEY, 0x8A, { KEY_PROG1 } }, {KE_KEY, 0x95, { KEY_MEDIA } }, {KE_KEY, 0x99, { KEY_PHONE } }, {KE_KEY, 0xc4, { KEY_KBDILLUMUP } }, {KE_KEY, 0xc5, { KEY_KBDILLUMDOWN } }, {KE_END, 0}, }; /* * This function evaluates an ACPI method, given an int as parameter, the * method is searched within the scope of the handle, can be NULL. The output * of the method is written is output, which can also be NULL * * returns 0 if write is successful, -1 else. */ static int write_acpi_int_ret(acpi_handle handle, const char *method, int val, struct acpi_buffer *output) { struct acpi_object_list params; /* list of input parameters (an int) */ union acpi_object in_obj; /* the only param we use */ acpi_status status; if (!handle) return 0; params.count = 1; params.pointer = &in_obj; in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = val; status = acpi_evaluate_object(handle, (char *)method, ¶ms, output); if (status == AE_OK) return 0; else return -1; } static int write_acpi_int(acpi_handle handle, const char *method, int val) { return write_acpi_int_ret(handle, method, val, NULL); } static int acpi_check_handle(acpi_handle handle, const char *method, acpi_handle *ret) { acpi_status status; if (method == NULL) return -ENODEV; if (ret) status = acpi_get_handle(handle, (char *)method, ret); else { acpi_handle dummy; status = acpi_get_handle(handle, (char *)method, &dummy); } if (status != AE_OK) { if (ret) pr_warning("Error finding %s\n", method); return -ENODEV; } return 0; } /* Generic LED function */ static int asus_led_set(struct asus_laptop *asus, char *method, int value) { if (!strcmp(method, METHOD_MLED)) value = !value; else if (!strcmp(method, METHOD_GLED)) value = !value + 1; else value = !!value; return write_acpi_int(asus->handle, method, value); } /* * LEDs */ #define ASUS_LED(object, ledname, max) \ static void object##_led_set(struct led_classdev *led_cdev, \ enum led_brightness value); \ static enum led_brightness object##_led_get( \ struct led_classdev *led_cdev); \ static void object##_led_update(struct work_struct *ignored); ASUS_LED(mled, "mail", 1); ASUS_LED(tled, "touchpad", 1); ASUS_LED(rled, "record", 1); ASUS_LED(pled, "phone", 1); ASUS_LED(gled, "gaming", 1); ASUS_LED(kled, "kbd_backlight", 3); /* /sys/class/led handlers */ #define ASUS_LED_HANDLER(object, method) \ static void object##_led_set(struct led_classdev *led_cdev, \ enum led_brightness value) \ { \ struct asus_laptop *asus = \ led_to_asus(led_cdev, object); \ \ asus->leds.object##_wk = (value > 0) ? 1 : 0; \ queue_work(asus->leds.workqueue, \ &asus->leds.object##_work); \ } \ static void object##_led_update(struct work_struct *work) \ { \ struct asus_laptop *asus = work_to_asus(work, object); \ \ int value = asus->leds.object##_wk; \ asus_led_set(asus, method, value); \ } \ static enum led_brightness object##_led_get( \ struct led_classdev *led_cdev) \ { \ return led_cdev->brightness; \ } ASUS_LED_HANDLER(mled, METHOD_MLED); ASUS_LED_HANDLER(pled, METHOD_PLED); ASUS_LED_HANDLER(rled, METHOD_RLED); ASUS_LED_HANDLER(tled, METHOD_TLED); ASUS_LED_HANDLER(gled, METHOD_GLED); /* * Keyboard backlight (also a LED) */ static int asus_kled_lvl(struct asus_laptop *asus) { unsigned long long kblv; struct acpi_object_list params; union acpi_object in_obj; acpi_status rv; params.count = 1; params.pointer = &in_obj; in_obj.type = ACPI_TYPE_INTEGER; in_obj.integer.value = 2; rv = acpi_evaluate_integer(asus->handle, METHOD_KBD_LIGHT_GET, ¶ms, &kblv); if (ACPI_FAILURE(rv)) { pr_warning("Error reading kled level\n"); return -ENODEV; } return kblv; } static int asus_kled_set(struct asus_laptop *asus, int kblv) { if (kblv > 0) kblv = (1 << 7) | (kblv & 0x7F); else kblv = 0; if (write_acpi_int(asus->handle, METHOD_KBD_LIGHT_SET, kblv)) { pr_warning("Keyboard LED display write failed\n"); return -EINVAL; } return 0; } static void kled_led_set(struct led_classdev *led_cdev, enum led_brightness value) { struct asus_laptop *asus = led_to_asus(led_cdev, kled); asus->leds.kled_wk = value; queue_work(asus->leds.workqueue, &asus->leds.kled_work); } static void kled_led_update(struct work_struct *work) { struct asus_laptop *asus = work_to_asus(work, kled); asus_kled_set(asus, asus->leds.kled_wk); } static enum led_brightness kled_led_get(struct led_classdev *led_cdev) { struct asus_laptop *asus = led_to_asus(led_cdev, kled); return asus_kled_lvl(asus); } static void asus_led_exit(struct asus_laptop *asus) { if (asus->leds.mled.dev) led_classdev_unregister(&asus->leds.mled); if (asus->leds.tled.dev) led_classdev_unregister(&asus->leds.tled); if (asus->leds.pled.dev) led_classdev_unregister(&asus->leds.pled); if (asus->leds.rled.dev) led_classdev_unregister(&asus->leds.rled); if (asus->leds.gled.dev) led_classdev_unregister(&asus->leds.gled); if (asus->leds.kled.dev) led_classdev_unregister(&asus->leds.kled); if (asus->leds.workqueue) { destroy_workqueue(asus->leds.workqueue); asus->leds.workqueue = NULL; } } /* Ugly macro, need to fix that later */ #define ASUS_LED_REGISTER(asus, object, _name, max, method) \ do { \ struct led_classdev *ldev = &asus->leds.object; \ \ if (method && acpi_check_handle(asus->handle, method, NULL)) \ break ; \ \ INIT_WORK(&asus->leds.object##_work, object##_led_update); \ ldev->name = "asus::" _name; \ ldev->brightness_set = object##_led_set; \ ldev->brightness_get = object##_led_get; \ ldev->max_brightness = max; \ rv = led_classdev_register(&asus->platform_device->dev, ldev); \ if (rv) \ goto error; \ } while (0) static int asus_led_init(struct asus_laptop *asus) { int rv; /* * Functions that actually update the LED's are called from a * workqueue. By doing this as separate work rather than when the LED * subsystem asks, we avoid messing with the Asus ACPI stuff during a * potentially bad time, such as a timer interrupt. */ asus->leds.workqueue = create_singlethread_workqueue("led_workqueue"); if (!asus->leds.workqueue) return -ENOMEM; ASUS_LED_REGISTER(asus, mled, "mail", 1, METHOD_MLED); ASUS_LED_REGISTER(asus, tled, "touchpad", 1, METHOD_TLED); ASUS_LED_REGISTER(asus, rled, "record", 1, METHOD_RLED); ASUS_LED_REGISTER(asus, pled, "phone", 1, METHOD_PLED); ASUS_LED_REGISTER(asus, gled, "gaming", 1, METHOD_GLED); if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL) && !acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_GET, NULL)) ASUS_LED_REGISTER(asus, kled, "kbd_backlight", 3, NULL); error: if (rv) asus_led_exit(asus); return rv; } /* * Backlight device */ static int asus_lcd_status(struct asus_laptop *asus) { return asus->lcd_state; } static int asus_lcd_set(struct asus_laptop *asus, int value) { int lcd = 0; acpi_status status = 0; lcd = !!value; if (lcd == asus_lcd_status(asus)) return 0; if (!lcd_switch_handle) return -ENODEV; status = acpi_evaluate_object(lcd_switch_handle, NULL, NULL, NULL); if (ACPI_FAILURE(status)) { pr_warning("Error switching LCD\n"); return -ENODEV; } asus->lcd_state = lcd; return 0; } static void lcd_blank(struct asus_laptop *asus, int blank) { struct backlight_device *bd = asus->backlight_device; asus->lcd_state = (blank == FB_BLANK_UNBLANK); if (bd) { bd->props.power = blank; backlight_update_status(bd); } } static int asus_read_brightness(struct backlight_device *bd) { struct asus_laptop *asus = bl_get_data(bd); unsigned long long value; acpi_status rv = AE_OK; rv = acpi_evaluate_integer(asus->handle, METHOD_BRIGHTNESS_GET, NULL, &value); if (ACPI_FAILURE(rv)) pr_warning("Error reading brightness\n"); return value; } static int asus_set_brightness(struct backlight_device *bd, int value) { struct asus_laptop *asus = bl_get_data(bd); if (write_acpi_int(asus->handle, METHOD_BRIGHTNESS_SET, value)) { pr_warning("Error changing brightness\n"); return -EIO; } return 0; } static int update_bl_status(struct backlight_device *bd) { struct asus_laptop *asus = bl_get_data(bd); int rv; int value = bd->props.brightness; rv = asus_set_brightness(bd, value); if (rv) return rv; value = (bd->props.power == FB_BLANK_UNBLANK) ? 1 : 0; return asus_lcd_set(asus, value); } static struct backlight_ops asusbl_ops = { .get_brightness = asus_read_brightness, .update_status = update_bl_status, }; static int asus_backlight_notify(struct asus_laptop *asus) { struct backlight_device *bd = asus->backlight_device; int old = bd->props.brightness; backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY); return old; } static int asus_backlight_init(struct asus_laptop *asus) { struct backlight_device *bd; struct device *dev = &asus->platform_device->dev; if (!acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_GET, NULL) && !acpi_check_handle(asus->handle, METHOD_BRIGHTNESS_SET, NULL) && lcd_switch_handle) { bd = backlight_device_register(ASUS_LAPTOP_FILE, dev, asus, &asusbl_ops); if (IS_ERR(bd)) { pr_err("Could not register asus backlight device\n"); asus->backlight_device = NULL; return PTR_ERR(bd); } asus->backlight_device = bd; bd->props.max_brightness = 15; bd->props.power = FB_BLANK_UNBLANK; bd->props.brightness = asus_read_brightness(bd); backlight_update_status(bd); } return 0; } static void asus_backlight_exit(struct asus_laptop *asus) { if (asus->backlight_device) backlight_device_unregister(asus->backlight_device); asus->backlight_device = NULL; } /* * Platform device handlers */ /* * We write our info in page, we begin at offset off and cannot write more * than count bytes. We set eof to 1 if we handle those 2 values. We return the * number of bytes written in page */ static ssize_t show_infos(struct device *dev, struct device_attribute *attr, char *page) { struct asus_laptop *asus = dev_get_drvdata(dev); int len = 0; unsigned long long temp; char buf[16]; /* enough for all info */ acpi_status rv = AE_OK; /* * We use the easy way, we don't care of off and count, so we don't set eof * to 1 */ len += sprintf(page, ASUS_LAPTOP_NAME " " ASUS_LAPTOP_VERSION "\n"); len += sprintf(page + len, "Model reference : %s\n", asus->name); /* * The SFUN method probably allows the original driver to get the list * of features supported by a given model. For now, 0x0100 or 0x0800 * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card. * The significance of others is yet to be found. */ rv = acpi_evaluate_integer(asus->handle, "SFUN", NULL, &temp); if (!ACPI_FAILURE(rv)) len += sprintf(page + len, "SFUN value : %#x\n", (uint) temp); /* * The HWRS method return informations about the hardware. * 0x80 bit is for WLAN, 0x100 for Bluetooth. * The significance of others is yet to be found. * If we don't find the method, we assume the device are present. */ rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp); if (!ACPI_FAILURE(rv)) len += sprintf(page + len, "HRWS value : %#x\n", (uint) temp); /* * Another value for userspace: the ASYM method returns 0x02 for * battery low and 0x04 for battery critical, its readings tend to be * more accurate than those provided by _BST. * Note: since not all the laptops provide this method, errors are * silently ignored. */ rv = acpi_evaluate_integer(asus->handle, "ASYM", NULL, &temp); if (!ACPI_FAILURE(rv)) len += sprintf(page + len, "ASYM value : %#x\n", (uint) temp); if (asus->dsdt_info) { snprintf(buf, 16, "%d", asus->dsdt_info->length); len += sprintf(page + len, "DSDT length : %s\n", buf); snprintf(buf, 16, "%d", asus->dsdt_info->checksum); len += sprintf(page + len, "DSDT checksum : %s\n", buf); snprintf(buf, 16, "%d", asus->dsdt_info->revision); len += sprintf(page + len, "DSDT revision : %s\n", buf); snprintf(buf, 7, "%s", asus->dsdt_info->oem_id); len += sprintf(page + len, "OEM id : %s\n", buf); snprintf(buf, 9, "%s", asus->dsdt_info->oem_table_id); len += sprintf(page + len, "OEM table id : %s\n", buf); snprintf(buf, 16, "%x", asus->dsdt_info->oem_revision); len += sprintf(page + len, "OEM revision : 0x%s\n", buf); snprintf(buf, 5, "%s", asus->dsdt_info->asl_compiler_id); len += sprintf(page + len, "ASL comp vendor id : %s\n", buf); snprintf(buf, 16, "%x", asus->dsdt_info->asl_compiler_revision); len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf); } return len; } static int parse_arg(const char *buf, unsigned long count, int *val) { if (!count) return 0; if (count > 31) return -EINVAL; if (sscanf(buf, "%i", val) != 1) return -EINVAL; return count; } static ssize_t sysfs_acpi_set(struct asus_laptop *asus, const char *buf, size_t count, const char *method) { int rv, value; int out = 0; rv = parse_arg(buf, count, &value); if (rv > 0) out = value ? 1 : 0; if (write_acpi_int(asus->handle, method, value)) return -ENODEV; return rv; } /* * LEDD display */ static ssize_t show_ledd(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "0x%08x\n", asus->ledd_status); } static ssize_t store_ledd(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); int rv, value; rv = parse_arg(buf, count, &value); if (rv > 0) { if (write_acpi_int(asus->handle, METHOD_LEDD, value)) pr_warning("LED display write failed\n"); else asus->ledd_status = (u32) value; } return rv; } /* * Wireless */ static int asus_wireless_status(struct asus_laptop *asus, int mask) { unsigned long long status; acpi_status rv = AE_OK; if (!asus->have_rsts) return (asus->wireless_status & mask) ? 1 : 0; rv = acpi_evaluate_integer(asus->handle, METHOD_WL_STATUS, NULL, &status); if (ACPI_FAILURE(rv)) { pr_warning("Error reading Wireless status\n"); return -EINVAL; } return !!(status & mask); } /* * WLAN */ static int asus_wlan_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_WLAN, !!status)) { pr_warning("Error setting wlan status to %d", status); return -EIO; } return 0; } static ssize_t show_wlan(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", asus_wireless_status(asus, WL_RSTS)); } static ssize_t store_wlan(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); return sysfs_acpi_set(asus, buf, count, METHOD_WLAN); } /* * Bluetooth */ static int asus_bluetooth_set(struct asus_laptop *asus, int status) { if (write_acpi_int(asus->handle, METHOD_BLUETOOTH, !!status)) { pr_warning("Error setting bluetooth status to %d", status); return -EIO; } return 0; } static ssize_t show_bluetooth(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", asus_wireless_status(asus, BT_RSTS)); } static ssize_t store_bluetooth(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH); } /* * Display */ static void asus_set_display(struct asus_laptop *asus, int value) { /* no sanity check needed for now */ if (write_acpi_int(asus->handle, METHOD_SWITCH_DISPLAY, value)) pr_warning("Error setting display\n"); return; } static int read_display(struct asus_laptop *asus) { unsigned long long value = 0; acpi_status rv = AE_OK; /* * In most of the case, we know how to set the display, but sometime * we can't read it */ if (display_get_handle) { rv = acpi_evaluate_integer(display_get_handle, NULL, NULL, &value); if (ACPI_FAILURE(rv)) pr_warning("Error reading display status\n"); } value &= 0x0F; /* needed for some models, shouldn't hurt others */ return value; } /* * Now, *this* one could be more user-friendly, but so far, no-one has * complained. The significance of bits is the same as in store_disp() */ static ssize_t show_disp(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", read_display(asus)); } /* * Experimental support for display switching. As of now: 1 should activate * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI. * Any combination (bitwise) of these will suffice. I never actually tested 4 * displays hooked up simultaneously, so be warned. See the acpi4asus README * for more info. */ static ssize_t store_disp(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); int rv, value; rv = parse_arg(buf, count, &value); if (rv > 0) asus_set_display(asus, value); return rv; } /* * Light Sens */ static void asus_als_switch(struct asus_laptop *asus, int value) { if (write_acpi_int(asus->handle, METHOD_ALS_CONTROL, value)) pr_warning("Error setting light sensor switch\n"); asus->light_switch = value; } static ssize_t show_lssw(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", asus->light_switch); } static ssize_t store_lssw(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); int rv, value; rv = parse_arg(buf, count, &value); if (rv > 0) asus_als_switch(asus, value ? 1 : 0); return rv; } static void asus_als_level(struct asus_laptop *asus, int value) { if (write_acpi_int(asus->handle, METHOD_ALS_LEVEL, value)) pr_warning("Error setting light sensor level\n"); asus->light_level = value; } static ssize_t show_lslvl(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", asus->light_level); } static ssize_t store_lslvl(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); int rv, value; rv = parse_arg(buf, count, &value); if (rv > 0) { value = (0 < value) ? ((15 < value) ? 15 : value) : 0; /* 0 <= value <= 15 */ asus_als_level(asus, value); } return rv; } /* * GPS */ static int asus_gps_status(struct asus_laptop *asus) { unsigned long long status; acpi_status rv = AE_OK; rv = acpi_evaluate_integer(asus->handle, METHOD_GPS_STATUS, NULL, &status); if (ACPI_FAILURE(rv)) { pr_warning("Error reading GPS status\n"); return -ENODEV; } return !!status; } static int asus_gps_switch(struct asus_laptop *asus, int status) { const char *meth = status ? METHOD_GPS_ON : METHOD_GPS_OFF; if (write_acpi_int(asus->handle, meth, 0x02)) return -ENODEV; return 0; } static ssize_t show_gps(struct device *dev, struct device_attribute *attr, char *buf) { struct asus_laptop *asus = dev_get_drvdata(dev); return sprintf(buf, "%d\n", asus_gps_status(asus)); } static ssize_t store_gps(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct asus_laptop *asus = dev_get_drvdata(dev); int rv, value; int ret; rv = parse_arg(buf, count, &value); if (rv <= 0) return -EINVAL; ret = asus_gps_switch(asus, !!value); if (ret) return ret; rfkill_set_sw_state(asus->gps_rfkill, !value); return rv; } /* * rfkill */ static int asus_gps_rfkill_set(void *data, bool blocked) { acpi_handle handle = data; return asus_gps_switch(handle, !blocked); } static const struct rfkill_ops asus_gps_rfkill_ops = { .set_block = asus_gps_rfkill_set, }; static void asus_rfkill_exit(struct asus_laptop *asus) { if (asus->gps_rfkill) { rfkill_unregister(asus->gps_rfkill); rfkill_destroy(asus->gps_rfkill); asus->gps_rfkill = NULL; } } static int asus_rfkill_init(struct asus_laptop *asus) { int result; if (acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) || acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) || acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) return 0; asus->gps_rfkill = rfkill_alloc("asus-gps", &asus->platform_device->dev, RFKILL_TYPE_GPS, &asus_gps_rfkill_ops, NULL); if (!asus->gps_rfkill) return -EINVAL; result = rfkill_register(asus->gps_rfkill); if (result) { rfkill_destroy(asus->gps_rfkill); asus->gps_rfkill = NULL; } return result; } /* * Input device (i.e. hotkeys) */ static void asus_input_notify(struct asus_laptop *asus, int event) { if (asus->inputdev) sparse_keymap_report_event(asus->inputdev, event, 1, true); } static int asus_input_init(struct asus_laptop *asus) { struct input_dev *input; int error; input = input_allocate_device(); if (!input) { pr_info("Unable to allocate input device\n"); return 0; } input->name = "Asus Laptop extra buttons"; input->phys = ASUS_LAPTOP_FILE "/input0"; input->id.bustype = BUS_HOST; input->dev.parent = &asus->platform_device->dev; input_set_drvdata(input, asus); error = sparse_keymap_setup(input, asus_keymap, NULL); if (error) { pr_err("Unable to setup input device keymap\n"); goto err_keymap; } error = input_register_device(input); if (error) { pr_info("Unable to register input device\n"); goto err_device; } asus->inputdev = input; return 0; err_keymap: sparse_keymap_free(input); err_device: input_free_device(input); return error; } static void asus_input_exit(struct asus_laptop *asus) { if (asus->inputdev) { sparse_keymap_free(asus->inputdev); input_unregister_device(asus->inputdev); } } /* * ACPI driver */ static void asus_acpi_notify(struct acpi_device *device, u32 event) { struct asus_laptop *asus = acpi_driver_data(device); u16 count; /* * We need to tell the backlight device when the backlight power is * switched */ if (event == ATKD_LCD_ON) lcd_blank(asus, FB_BLANK_UNBLANK); else if (event == ATKD_LCD_OFF) lcd_blank(asus, FB_BLANK_POWERDOWN); /* TODO Find a better way to handle events count. */ count = asus->event_count[event % 128]++; acpi_bus_generate_proc_event(asus->device, event, count); acpi_bus_generate_netlink_event(asus->device->pnp.device_class, dev_name(&asus->device->dev), event, count); /* Brightness events are special */ if (event >= ATKD_BR_MIN && event <= ATKD_BR_MAX) { /* Ignore them completely if the acpi video driver is used */ if (asus->backlight_device != NULL) { /* Update the backlight device. */ asus_backlight_notify(asus); } return ; } asus_input_notify(asus, event); } #define ASUS_CREATE_DEVICE_ATTR(_name) \ struct device_attribute dev_attr_##_name = { \ .attr = { \ .name = __stringify(_name), \ .mode = 0 }, \ .show = NULL, \ .store = NULL, \ } #define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store) \ do { \ dev_attr_##_name.attr.mode = _mode; \ dev_attr_##_name.show = _show; \ dev_attr_##_name.store = _store; \ } while(0) static ASUS_CREATE_DEVICE_ATTR(infos); static ASUS_CREATE_DEVICE_ATTR(wlan); static ASUS_CREATE_DEVICE_ATTR(bluetooth); static ASUS_CREATE_DEVICE_ATTR(display); static ASUS_CREATE_DEVICE_ATTR(ledd); static ASUS_CREATE_DEVICE_ATTR(ls_switch); static ASUS_CREATE_DEVICE_ATTR(ls_level); static ASUS_CREATE_DEVICE_ATTR(gps); static struct attribute *asuspf_attributes[] = { &dev_attr_infos.attr, &dev_attr_wlan.attr, &dev_attr_bluetooth.attr, &dev_attr_display.attr, &dev_attr_ledd.attr, &dev_attr_ls_switch.attr, &dev_attr_ls_level.attr, &dev_attr_gps.attr, NULL }; static struct attribute_group platform_attribute_group = { .attrs = asuspf_attributes }; static int asus_platform_init(struct asus_laptop *asus) { int result; asus->platform_device = platform_device_alloc(ASUS_LAPTOP_FILE, -1); if (!asus->platform_device) return -ENOMEM; platform_set_drvdata(asus->platform_device, asus); result = platform_device_add(asus->platform_device); if (result) goto fail_platform_device; result = sysfs_create_group(&asus->platform_device->dev.kobj, &platform_attribute_group); if (result) goto fail_sysfs; return 0; fail_sysfs: platform_device_del(asus->platform_device); fail_platform_device: platform_device_put(asus->platform_device); return result; } static void asus_platform_exit(struct asus_laptop *asus) { sysfs_remove_group(&asus->platform_device->dev.kobj, &platform_attribute_group); platform_device_unregister(asus->platform_device); } static struct platform_driver platform_driver = { .driver = { .name = ASUS_LAPTOP_FILE, .owner = THIS_MODULE, } }; static void asus_laptop_add_fs(struct asus_laptop *asus) { ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL); if (!acpi_check_handle(asus->handle, METHOD_WLAN, NULL)) ASUS_SET_DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan); if (!acpi_check_handle(asus->handle, METHOD_BLUETOOTH, NULL)) ASUS_SET_DEVICE_ATTR(bluetooth, 0644, show_bluetooth, store_bluetooth); if (!acpi_check_handle(asus->handle, METHOD_SWITCH_DISPLAY, NULL)) { if (display_get_handle) ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp); else ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp); } if (!acpi_check_handle(asus->handle, METHOD_LEDD, NULL)) ASUS_SET_DEVICE_ATTR(ledd, 0644, show_ledd, store_ledd); if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) && !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) { ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl); ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw); } if (!acpi_check_handle(asus->handle, METHOD_GPS_ON, NULL) && !acpi_check_handle(asus->handle, METHOD_GPS_OFF, NULL) && !acpi_check_handle(asus->handle, METHOD_GPS_STATUS, NULL)) ASUS_SET_DEVICE_ATTR(gps, 0644, show_gps, store_gps); } static int asus_handle_init(char *name, acpi_handle * handle, char **paths, int num_paths) { int i; acpi_status status; for (i = 0; i < num_paths; i++) { status = acpi_get_handle(NULL, paths[i], handle); if (ACPI_SUCCESS(status)) return 0; } *handle = NULL; return -ENODEV; } #define ASUS_HANDLE_INIT(object) \ asus_handle_init(#object, &object##_handle, object##_paths, \ ARRAY_SIZE(object##_paths)) /* * This function is used to initialize the context with right values. In this * method, we can make all the detection we want, and modify the asus_laptop * struct */ static int asus_laptop_get_info(struct asus_laptop *asus) { struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *model = NULL; unsigned long long bsts_result, hwrs_result; char *string = NULL; acpi_status status; /* * Get DSDT headers early enough to allow for differentiating between * models, but late enough to allow acpi_bus_register_driver() to fail * before doing anything ACPI-specific. Should we encounter a machine, * which needs special handling (i.e. its hotkey device has a different * HID), this bit will be moved. */ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus->dsdt_info); if (ACPI_FAILURE(status)) pr_warning("Couldn't get the DSDT table header\n"); /* We have to write 0 on init this far for all ASUS models */ if (write_acpi_int_ret(asus->handle, "INIT", 0, &buffer)) { pr_err("Hotkey initialization failed\n"); return -ENODEV; } /* This needs to be called for some laptops to init properly */ status = acpi_evaluate_integer(asus->handle, "BSTS", NULL, &bsts_result); if (ACPI_FAILURE(status)) pr_warning("Error calling BSTS\n"); else if (bsts_result) pr_notice("BSTS called, 0x%02x returned\n", (uint) bsts_result); /* This too ... */ if (write_acpi_int(asus->handle, "CWAP", wapf)) pr_err("Error calling CWAP(%d)\n", wapf); /* * Try to match the object returned by INIT to the specific model. * Handle every possible object (or the lack of thereof) the DSDT * writers might throw at us. When in trouble, we pass NULL to * asus_model_match() and try something completely different. */ if (buffer.pointer) { model = buffer.pointer; switch (model->type) { case ACPI_TYPE_STRING: string = model->string.pointer; break; case ACPI_TYPE_BUFFER: string = model->buffer.pointer; break; default: string = ""; break; } } asus->name = kstrdup(string, GFP_KERNEL); if (!asus->name) return -ENOMEM; if (*string) pr_notice(" %s model detected\n", string); /* * The HWRS method return informations about the hardware. * 0x80 bit is for WLAN, 0x100 for Bluetooth. * The significance of others is yet to be found. */ status = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result); if (!ACPI_FAILURE(status)) pr_notice(" HRWS returned %x", (int)hwrs_result); if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) asus->have_rsts = true; /* Scheduled for removal */ ASUS_HANDLE_INIT(lcd_switch); ASUS_HANDLE_INIT(display_get); kfree(model); return AE_OK; } static bool asus_device_present; static int __devinit asus_acpi_init(struct asus_laptop *asus) { int result = 0; result = acpi_bus_get_status(asus->device); if (result) return result; if (!asus->device->status.present) { pr_err("Hotkey device not present, aborting\n"); return -ENODEV; } result = asus_laptop_get_info(asus); if (result) return result; asus_laptop_add_fs(asus); /* WLED and BLED are on by default */ if (bluetooth_status >= 0) asus_bluetooth_set(asus, !!bluetooth_status); if (wlan_status >= 0) asus_wlan_set(asus, !!wlan_status); /* Keyboard Backlight is on by default */ if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL)) asus_kled_set(asus, 1); /* LED display is off by default */ asus->ledd_status = 0xFFF; /* Set initial values of light sensor and level */ asus->light_switch = 0; /* Default to light sensor disabled */ asus->light_level = 5; /* level 5 for sensor sensitivity */ if (!acpi_check_handle(asus->handle, METHOD_ALS_CONTROL, NULL) && !acpi_check_handle(asus->handle, METHOD_ALS_LEVEL, NULL)) { asus_als_switch(asus, asus->light_switch); asus_als_level(asus, asus->light_level); } asus->lcd_state = 1; /* LCD should be on when the module load */ return result; } static int __devinit asus_acpi_add(struct acpi_device *device) { struct asus_laptop *asus; int result; pr_notice("Asus Laptop Support version %s\n", ASUS_LAPTOP_VERSION); asus = kzalloc(sizeof(struct asus_laptop), GFP_KERNEL); if (!asus) return -ENOMEM; asus->handle = device->handle; strcpy(acpi_device_name(device), ASUS_LAPTOP_DEVICE_NAME); strcpy(acpi_device_class(device), ASUS_LAPTOP_CLASS); device->driver_data = asus; asus->device = device; result = asus_acpi_init(asus); if (result) goto fail_platform; /* * Register the platform device first. It is used as a parent for the * sub-devices below. */ result = asus_platform_init(asus); if (result) goto fail_platform; if (!acpi_video_backlight_support()) { result = asus_backlight_init(asus); if (result) goto fail_backlight; } else pr_info("Backlight controlled by ACPI video driver\n"); result = asus_input_init(asus); if (result) goto fail_input; result = asus_led_init(asus); if (result) goto fail_led; result = asus_rfkill_init(asus); if (result) goto fail_rfkill; asus_device_present = true; return 0; fail_rfkill: asus_led_exit(asus); fail_led: asus_input_exit(asus); fail_input: asus_backlight_exit(asus); fail_backlight: asus_platform_exit(asus); fail_platform: kfree(asus->name); kfree(asus); return result; } static int asus_acpi_remove(struct acpi_device *device, int type) { struct asus_laptop *asus = acpi_driver_data(device); asus_backlight_exit(asus); asus_rfkill_exit(asus); asus_led_exit(asus); asus_input_exit(asus); asus_platform_exit(asus); kfree(asus->name); kfree(asus); return 0; } static const struct acpi_device_id asus_device_ids[] = { {"ATK0100", 0}, {"ATK0101", 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, asus_device_ids); static struct acpi_driver asus_acpi_driver = { .name = ASUS_LAPTOP_NAME, .class = ASUS_LAPTOP_CLASS, .owner = THIS_MODULE, .ids = asus_device_ids, .flags = ACPI_DRIVER_ALL_NOTIFY_EVENTS, .ops = { .add = asus_acpi_add, .remove = asus_acpi_remove, .notify = asus_acpi_notify, }, }; static int __init asus_laptop_init(void) { int result; result = platform_driver_register(&platform_driver); if (result < 0) return result; result = acpi_bus_register_driver(&asus_acpi_driver); if (result < 0) goto fail_acpi_driver; if (!asus_device_present) { result = -ENODEV; goto fail_no_device; } return 0; fail_no_device: acpi_bus_unregister_driver(&asus_acpi_driver); fail_acpi_driver: platform_driver_unregister(&platform_driver); return result; } static void __exit asus_laptop_exit(void) { acpi_bus_unregister_driver(&asus_acpi_driver); platform_driver_unregister(&platform_driver); } module_init(asus_laptop_init); module_exit(asus_laptop_exit);