Impact: cleanup

As promised, now that dumpstack_32 and dumpstack_64 have so many bits
in common, we should merge the in-sync bits into a common file, to
prevent them from diverging again.

This patch removes bits which are common between dumpstack_32.c and
dumpstack_64.c and places them in a common dumpstack.c which is built
for both 32 and 64 bit arches.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

 Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/Makefile       |    2
 arch/x86/kernel/dumpstack.c    |  319 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/dumpstack.h    |   39 +++++
 arch/x86/kernel/dumpstack_32.c |  294 -------------------------------------
 arch/x86/kernel/dumpstack_64.c |  285 ------------------------------------
 5 files changed, 363 insertions(+), 576 deletions(-)

Make i386's die() equal to x86_64's version.

Whitespace-only changes on x86_64, to make it equal to i386's
version. (user_mode and user_mode_vm are equal on x86_64.)
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use oops_begin and oops_end in die_nmi.

Whitespace-only changes on x86_64, to make it equal to i386's
version.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

oops_begin/oops_end should always be used in pairs. On x86_64
oops_begin increments die_nest_count, and oops_end decrements
die_nest_count. Doing this makes oops_begin and oops_end equal
to the x86_64 versions.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Always call oops_exit from oops_end, even if signr==0.

Also, move add_taint(TAINT_DIE) from __die to oops_end
on x86_64 and interchange two lines to make oops_end
more similar to the i386-version.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Change oops_end such that signr=0 signals that do_exit
is not to be called.

Currently, each use of __die is soon followed by a call
to oops_end and 'regs' is set to NULL if oops_end is expected
not to call do_exit. Change all such pairs to set signr=0
instead. On x86_64 oops_end is used 'bare' in die_nmi; use
signr=0 instead of regs=NULL there, too.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

crash_kexec should not be called with console_sem held. Move
the call before bust_spinlocks(0) in oops_end to avoid the
problem.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Acked-by: N"Neil Horman" <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There's a corner case in 32 bit x86 kdump at the moment.  When the box
panics via nmi, we call bust_spinlocks(1) to disable sensitivity to the
console_sem (allowing us to print to the console in all cases), but we don't
call crash_kexec, until after we call bust_spinlocks(0), which re-enables
console_sem sensitivity.

The result is that, if we get an nmi while the console_sem is held and
kdump is configured, and we try to print something to the console during
kdump shutdown (which we often do) we deadlock the box.  The fix is to
simply do what 64 bit die_nmi does which is to not call bust_spinlocks(0)
until after we call crash_kexec.

Patch below tested successfully by me.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Print the name of the last-accessed sysfs file when we oops, to help track
down oopses which occur in sysfs store/read handlers.  Because these oopses
tend to not leave any trace of the offending code in the stack traces.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

- define STACKSLOTS_PER_LINE and use it
 - define get_bp macro to hide the %%ebp/%%rbp difference
 - i386: check task==NULL in dump_trace, like x86_64
 - i386: show_trace(NULL, ...) uses current automatically
 - x86_64: use [#%d] for die_counter, like i386
 - whitespace and comments
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- make kstack= and early_param
 - add oops=panic, setting panic_on_oops
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- x86: Write log_lvl strings if available
 - start raw stack dumps on new line
 - i386: Remove extra indentation for raw stack dumps
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- i386 and x86_64: always printk the 'data' parameter
 - i386: announce stack switch (irq -> normal)
 - i386: check if there is a stack switch before announcing it

There is a warning that 'context' might come out corrupt in early
boot. If this is true it should be fixed, not worked around.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- Add "end" parameter to valid_stack_ptr and print_context_stack
 - use sizeof(long) as the size of a word on the stack
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

- x86_64: use %p to print an address
 - make i386-version the same as the above

The result should be the same on x86_64; on i386 the
output only changes if CONFIG_KALLSYMS is turned off,
in which case the address is printed twice.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

For some reason die_nmi is still defined in traps.c for
i386, but is found in dumpstack_64.c for x86_64. Move it
to dumpstack_32.c
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The dumpstack code is logically quite independent from the
hardware traps. Split it out into its own file.
Signed-off-by: NAlexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: NIngo Molnar <mingo@elte.hu>