This patch makes the needlessly global struct hp_sdc_mlc_priv_s static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

If the subsystem is not present, instead of not doing anything, report
the key press as a normal key. This is done by modifying at
initialization the copied key entry table.
Signed-off-by: NEric Piel <Eric.Piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Video switch key on HP 2133 doesn't send release event, so we
have to create workaround similar to what we do for Dell Latitude,
i.e. perform DMI match for the system and generate 'false' release
event ourselves, so that userspace doesn't think that the key is
stuck forever.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NRichard Lemon <richard@codelemon.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The hardware does not support pressure measurement is 5-wire mode
so warn the user if he tries to request it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Force feedback upload of effects through the event device (ioctl
EVIOCSFF) is not working in 32 bit applications running on 64-bit
kernel due to the fact that struct ff_effect contains a pointer,
resulting in the structure having different sizes in 64 and 32 bit
programs and causing difference in ioctl numbers.

[dtor@mail.ru: refactor to keep all ugliness in evdev]
Signed-off-by: NAdam Dawidowski <drake_ster@wp.pl>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should help with devices that don't set up their phys or name
since sysfs ID is always present.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

On some boxes the touchpad needs to be reinitialized after resume to make
it function again. This fixes bugzilla #10825.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There are systems that fail in i8042_resume() with

	i8042: Can't write CTR to resume

as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the
controller claimed itself to be ready before.

One retry after failing write fixes the problems on the failing systems.
Reported-by: NHelmut Schaa <hschaa@novell.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to
already existing entry for V2010 model (note that Fujitsu-Siemens changed
the capitalization in the DMI data for product).
Tested-by: NJiri Mleziva <jmleziva@tiscali.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It should be possible to build pcspkr driver together with snd-pcsp,
even though tehy can not be used together.
Signed-off-by: NStas Sergeev <stsp@aknet.ru>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

That fixes an opps when driver is repeatedly loaded and unloaded in
a tight loop.
Tested-by: NRoland Kletzing <devzero@web.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Since some of the keycodes defined in input.h have values greater
than 255 we should use unsigned shorts in keymaps.
Tested-by: NCarlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPau Oliva Fora <pau@eslack.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The code would try to free 'report' twice upon input_register_device()
failure.
Reported-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch introduces i8042_dmi_nopnp_table to make it possible to perform
DMI matches for systems that need 'i8042.nopnp' to work correctly, and
introduces such an entry for Intel D845PESV -- this system doesn't
detect PS2 mouse reliably without this option, as reported by Robert
Lewis.

[dtor@mail.ru - make it compile if CONFIG_PNP is off - reported
 by Randy Dunlap]
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

1. Set input bits for direct keys codes
2. Set input bits for rotary encoder codes only if rotary
   encoder is enabled
3. Enable EV_REL only if rotary encoder is enabled and rel_codes
   are set up
Signed-off-by: NAntonio Ospite <ao2@openezx.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This will shut off garbage that may come from KBD port during resume.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Remove duplicate include file <linux/module.h>.
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The chip phy_init() function must be called before the dig_enable() function
but dig_enable() is called when the device is opened and we only call
phy_init() after having reigstered the device, meaning the two can race.
Fix this by doing the phy_init() before we register the input device.

Thanks to Rodolfo Giometti <giometti@enneenne.com> for the report.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Fix driver name - thanks to Guennadi Liakhovetski <g.liakhovetski@gmx.de> for
reporting this.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

phys is displayed in diagnostic output like that from evbug so ensure
that it is set to something.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also do not fail i8042 entire initialization if enabling dritek extension
fails.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Acer TravelMate 660 series also requires the Dritek quirk to enable the
extra scancodes.
Signed-off-by: NBruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch removes CVS keywords that weren't updated for a long time
from comments.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This is V2 of the MigoR touch screen driver. The chip we interface to
is unfortunately a custom designed microcontroller speaking some
undocumented protocol over i2c.

The board specific code is expected to register this device as an i2c
chip using struct i2c_board_info [] and i2c_register_board_info().

[dtor@mail.ru: don't enable touchscreen if there are no users]
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Delayed command execution is not used by anyone so let's remove it.
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

They have never been used and are unlikely to be used in the future
so remove them altogether.
Reported-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

[dtor@mail.ru: also signal correct return value to callers]
Signed-off-by: NAndres Salomon <dilinger@debian.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch simplifies type detection and removes unnecessary code.
Signed-off-by: NSven Anders <anders@anduras.de>
[jberg: don't typedef, checkpatch clean, remove useless comments, ...]
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch does some code cleanups in appletouch:
 * useless comment removal
 * make almost checkpatch clean
 * make sparse clean
Signed-off-by: NSven Anders <anders@anduras.de>
[jberg: most of the changes including removing much of the original patch]
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Replace two opencoded nested min/max macros with clamp_val().
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Otherwise it can only take the values 0/-1 which doesn't seem to
have been intended.

drivers/input/tablet/wacom.h:108:12: error: dubious one-bit signed bitfield
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>