Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 17 12月, 2010 2 次提交
  3. 25 10月, 2010 1 次提交
  5. 23 10月, 2010 1 次提交
    • A
      SYSFS: Allow boot time switching between deprecated and modern sysfs layout · e52eec13
      由 Andi Kleen 提交于 
      I have some systems which need legacy sysfs due to old tools that are
making assumptions that a directory can never be a symlink to another
directory, and it's a big hazzle to compile separate kernels for them.

This patch turns CONFIG_SYSFS_DEPRECATED into a run time option
that can be switched on/off the kernel command line. This way
the same binary can be used in both cases with just a option
on the command line.

The old CONFIG_SYSFS_DEPRECATED_V2 option is still there to set
the default. I kept the weird name to not break existing
config files.

Also the compat code can be still completely disabled by undefining
CONFIG_SYSFS_DEPRECATED_SWITCH -- just the optimizer takes
care of this now instead of lots of ifdefs. This makes the code
look nicer.

v2: This is an updated version on top of Kay's patch to only
handle the block devices. I tested it on my old systems
and that seems to work.

Cc: axboe@kernel.dk
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
      e52eec13
  7. 19 10月, 2010 1 次提交
    • Y
      block: fix accounting bug on cross partition merges · 7681bfee
      由 Yasuaki Ishimatsu 提交于 
      /proc/diskstats would display a strange output as follows.

$ cat /proc/diskstats |grep sda
   8       0 sda 90524 7579 102154 20464 0 0 0 0 0 14096 20089
   8       1 sda1 19085 1352 21841 4209 0 0 0 0 4294967064 15689 4293424691
                                                ~~~~~~~~~~
   8       2 sda2 71252 3624 74891 15950 0 0 0 0 232 23995 1562390
   8       3 sda3 54 487 2188 92 0 0 0 0 0 88 92
   8       4 sda4 4 0 8 0 0 0 0 0 0 0 0
   8       5 sda5 81 2027 2130 138 0 0 0 0 0 87 137

Its reason is the wrong way of accounting hd_struct->in_flight. When a bio is
merged into a request belongs to different partition by ELEVATOR_FRONT_MERGE.

The detailed root cause is as follows.

Assuming that there are two partition, sda1 and sda2.

1. A request for sda2 is in request_queue. Hence sda1's hd_struct->in_flight
   is 0 and sda2's one is 1.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

2. A bio belongs to sda1 is issued and is merged into the request mentioned on
   step1 by ELEVATOR_BACK_MERGE. The first sector of the request is changed
   from sda2 region to sda1 region. However the two partition's
   hd_struct->in_flight are not changed.

        | hd_struct->in_flight
   ---------------------------
   sda1 |          0
   sda2 |          1
   ---------------------------

3. The request is finished and blk_account_io_done() is called. In this case,
   sda2's hd_struct->in_flight, not a sda1's one, is decremented.

        | hd_struct->in_flight
   ---------------------------
   sda1 |         -1
   sda2 |          1
   ---------------------------

The patch fixes the problem by caching the partition lookup
inside the request structure, hence making sure that the increment
and decrement will always happen on the same partition struct. This
also speeds up IO with accounting enabled, since it cuts down on
the number of lookups we have to do.

When reloading partition tables, quiesce IO to ensure that no
request references to the partition struct exists. When it is safe
to free the partition table, the IO for that device is restarted
again.
Signed-off-by: NYasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      7681bfee
  9. 17 9月, 2010 1 次提交
  11. 15 9月, 2010 2 次提交
    • W
      init: add support for root devices specified by partition UUID · b5af921e
      由 Will Drewry 提交于 
      This is the third patch in a series which adds support for
storing partition metadata, optionally, off of the hd_struct.

One major use for that data is being able to resolve partition
by other identities than just the index on a block device.  Device
enumeration varies by platform and there's a benefit to being able
to use something like EFI GPT's GUIDs to determine the correct
block device and partition to mount as the root.

This change adds that support to root= by adding support for
the following syntax:

  root=PARTUUID=hex-uuid
Signed-off-by: NWill Drewry <wad@chromium.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      b5af921e
    • W
      block, partition: add partition_meta_info to hd_struct · 6d1d8050
      由 Will Drewry 提交于 
      I'm reposting this patch series as v4 since there have been no additional
comments, and I cleaned up one extra bit of unneeded code (in 3/3). The patches
are against Linus's tree: 2bfc96a1
(2.6.36-rc3).

Would this patchset be suitable for inclusion in an mm branch?

This changes adds a partition_meta_info struct which itself contains a
union of structures that provide partition table specific metadata.

This change leaves the union empty. The subsequent patch includes an
implementation for CONFIG_EFI_PARTITION-based metadata.
Signed-off-by: NWill Drewry <wad@chromium.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
      6d1d8050
  13. 22 5月, 2010 1 次提交
  15. 15 4月, 2010 1 次提交
  17. 11 1月, 2010 1 次提交
  19. 10 11月, 2009 1 次提交
  21. 07 10月, 2009 1 次提交
    • N
      block: Seperate read and write statistics of in_flight requests v2 · 316d315b
      由 Nikanth Karthikesan 提交于 
      Commit a9327cac added seperate read
and write statistics of in_flight requests. And exported the number
of read and write requests in progress seperately through sysfs.

But  Corrado Zoccolo <czoccolo@gmail.com> reported getting strange
output from "iostat -kx 2". Global values for service time and
utilization were garbage. For interval values, utilization was always
100%, and service time is higher than normal.

So this was reverted by commit 0f78ab98

The problem was in part_round_stats_single(), I missed the following:
        if (now == part->stamp)
                return;

-       if (part->in_flight) {
+       if (part_in_flight(part)) {
                __part_stat_add(cpu, part, time_in_queue,
                                part_in_flight(part) * (now - part->stamp));
                __part_stat_add(cpu, part, io_ticks, (now - part->stamp));

With this chunk included, the reported regression gets fixed.
Signed-off-by: NNikanth Karthikesan <knikanth@suse.de>

--
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      316d315b
  23. 05 10月, 2009 1 次提交
    • J
      Revert "Seperate read and write statistics of in_flight requests" · 0f78ab98
      由 Jens Axboe 提交于 
      This reverts commit a9327cac.

Corrado Zoccolo <czoccolo@gmail.com> reports:

"with 2.6.32-rc1 I started getting the following strange output from
"iostat -kx 2":
Linux 2.6.31bisect (et2) 	04/10/2009 	_i686_	(2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          10,70    0,00    3,16   15,75    0,00   70,38

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda              18,22     0,00    0,67    0,01    14,77     0,02
43,94     0,01   10,53 39043915,03 2629219,87
sdb              60,89     9,68   50,79    3,04  1724,43    50,52
65,95     0,70   13,06 488437,47 2629219,87

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           2,72    0,00    0,74    0,00    0,00   96,53

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           6,68    0,00    0,99    0,00    0,00   92,33

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           4,40    0,00    0,73    1,47    0,00   93,40

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     4,00    0,00    3,00     0,00    28,00
18,67     0,06   19,50 333,33 100,00

Global values for service time and utilization are garbage. For
interval values, utilization is always 100%, and service time is
higher than normal.

I bisected it down to:
[a9327cac] Seperate read and write
statistics of in_flight requests
and verified that reverting just that commit indeed solves the issue
on 2.6.32-rc1."

So until this is debugged, revert the bad commit.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      0f78ab98
  25. 20 9月, 2009 1 次提交
  27. 16 9月, 2009 1 次提交
  29. 14 9月, 2009 1 次提交
  31. 11 9月, 2009 1 次提交
  33. 16 6月, 2009 1 次提交
  35. 23 5月, 2009 1 次提交
    • M
      block: Export I/O topology for block devices and partitions · c72758f3
      由 Martin K. Petersen 提交于 
      To support devices with physical block sizes bigger than 512 bytes we
need to ensure proper alignment.  This patch adds support for exposing
I/O topology characteristics as devices are stacked.

  logical_block_size is the smallest unit the device can address.

  physical_block_size indicates the smallest I/O the device can write
  without incurring a read-modify-write penalty.

  The io_min parameter is the smallest preferred I/O size reported by
  the device.  In many cases this is the same as the physical block
  size.  However, the io_min parameter can be scaled up when stacking
  (RAID5 chunk size > physical block size).

  The io_opt characteristic indicates the optimal I/O size reported by
  the device.  This is usually the stripe width for arrays.

  The alignment_offset parameter indicates the number of bytes the start
  of the device/partition is offset from the device's natural alignment.
  Partition tools and MD/DM utilities can use this to pad their offsets
  so filesystems start on proper boundaries.
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      c72758f3
  37. 22 4月, 2009 1 次提交
  39. 26 2月, 2009 1 次提交
  41. 18 2月, 2009 1 次提交
    • N
      block: fix booting from partitioned md array · 41b8c853
      由 Neil Brown 提交于 
      Hi Tejun,

 it looks like your commit:

   block: don't depend on consecutive minor space
   f331c029

 broke a particular case for booting from partitioned md/raid devices.
 That is the second time this has been broken recently.  The previous
 time was fixed by

   block: do_mounts - accept root=<non-existant partition>
   30f2f0eb

 Because the data isn't available when an md device is first created
 (we add disks and set it up after creation), the initial partition
 scan finds nothing.  It is not until the device is opened that
 another partition scan happens and finds something.

 So at the point where the kernel parameter "root=/dev/md_d0p1" is
 being parsed, md_d0 exists, but md_d0p1 does not.
 However if we let blk_lookup_devt return the correct device number
 even though the device doesn't exist, then the attempt to mount it
 will successfully find the partition.

 I have tried in the past to find a way to get the partition table to
 be read as soon as the array is assembled but that proved impossible
 (at the time).  I don't remember the details, and could possibly
 revisit it.  However it would be really nice if blk_lookup_devt
 could be adjusted to again accept non existant partitions.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      41b8c853
  43. 07 1月, 2009 1 次提交
  45. 29 12月, 2008 1 次提交
    • J
      block: add one-hit cache for disk partition lookup · a6f23657
      由 Jens Axboe 提交于 
      disk_map_sector_rcu() returns a partition from a sector offset,
which we use for IO statistics on a per-partition basis. The
lookup itself is an O(N) list lookup, where N is the number of
partitions. This actually hurts performance quite a bit, even
on the lower end partitions. On higher numbered partitions,
it can get pretty bad.

Solve this by adding a one-hit cache for partition lookup.
This makes the lookup O(1) for the case where we do most IO to
one partition. Even for mixed partition workloads, amortized cost
is pretty close to O(1) since the natural IO batching makes the
one-hit cache last for lots of IOs.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      a6f23657
  47. 03 12月, 2008 1 次提交
  49. 18 11月, 2008 1 次提交
    • Z
      block: fix boot failure with CONFIG_DEBUG_BLOCK_EXT_DEVT=y and nash · 561ec68e
      由 Zhang, Yanmin 提交于 
      We run into system boot failure with kernel 2.6.28-rc. We found it on a
couple of machines, including T61 notebook, nehalem machine, and another
HPC NX6325 notebook.  All the machines use FedoraCore 8 or FedoraCore 9.
With kernel prior to 2.6.28-rc, system boot doesn't fail.

I debug it and locate the root cause. Pls. see
http://bugzilla.kernel.org/show_bug.cgi?id=11899
https://bugzilla.redhat.com/show_bug.cgi?id=471517

As a matter of fact, there are 2 bugs.

1)root=/dev/sda1, system boot randomly fails. Mostly, boot for 5 times
and fails once. nash has a bug. Some of its functions misuse return
value 0.  Sometimes, 0 means timeout and no uevent available. Sometimes,
0 means nash gets an uevent, but the uevent isn't block-related (for
exmaple, usb). If by coincidence, kernel tells nash that uevents are
available, but kernel also set timeout, nash might stops collecting
other uevents in queue if current uevent isn't block-related.  I work
out a patch for nash to fix it.
http://bugzilla.kernel.org/attachment.cgi?id=18858

2) root=LABEL=/, system always can't boot. initrd init reports
switchroot fails. Here is an executation branch of nash when booting:
    (1) nash read /sys/block/sda/dev; Assume major is 8 (on my desktop)
    (2) nash query /proc/devices with the major number; It found line
	"8 sd";
    (3) nash use 'sd' to search its own probe table to find device (DISK)
	type for the device and add it to its own list;
    (4) Later on, it probes all devices in its list to get filesystem
	labels; scsi register "8 sd" always.

When major is 259, nash fails to find the device(DISK) type. I enables
CONFIG_DEBUG_BLOCK_EXT_DEVT=y when compiling kernel, so 259 is picked up
for device /dev/sda1, which causes nash to fail to find device (DISK)
type.

To fixing issue 2), I create a patch for nash and another patch for
kernel.

http://bugzilla.kernel.org/attachment.cgi?id=18859
http://bugzilla.kernel.org/attachment.cgi?id=18837

Below is the patch for kernel 2.6.28-rc4. It registers blkext, a new
block device in proc/devices.

With 2 patches on nash and 1 patch on kernel, I boot my machines for
dozens of times without failure.

Signed-off-by Zhang Yanmin <yanmin.zhang@linux.intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      561ec68e
  51. 23 10月, 2008 2 次提交
  53. 17 10月, 2008 2 次提交
  55. 09 10月, 2008 9 次提交
    • J
      block: add fault injection mechanism for faking request timeouts · 581d4e28
      由 Jens Axboe 提交于 
      Only works for the generic request timer handling. Allows one to
sporadically ignore request completions, thus exercising the timeout
handling.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      581d4e28
    • T
      block: fix duplicate headers for /proc/partitions · 243294da
      由 Tejun Heo 提交于 
      seqf can be started multiple times for a read and the header should be
printed only for the initial one.  Fix it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      243294da
    • T
      block: don't test for partition size in bdget_disk() and blk_lookup_devt() · 2bbedcb4
      由 Tejun Heo 提交于 
      bdget_disk() and blk_lookup_devt() never cared whether the specified
partition (or disk) is zero sized or not.  I got confused while
converting those not to depend on consecutive minor numbers in commit
5a6411b1178baf534aa9138052864dfa89d3eada and later when dev0 was added
it broke callers which expected to get valid return for zero sized
disk devices.

So, they never needed nr_sects checks in the first place.  Kill them.

This problem was spotted and debugged by Bartlmoiej Zolnierkiewicz.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      2bbedcb4
    • H
      block: kmalloc args reversed, small function definition fixes · aeb3d3a8
      由 Harvey Harrison 提交于 
      Noticed by sparse:
block/blk-softirq.c:156:12: warning: symbol 'blk_softirq_init' was not declared. Should it be static?
block/genhd.c:583:28: warning: function 'bdget_disk' with external linkage has definition
block/genhd.c:659:17: warning: incorrect type in argument 1 (different base types)
block/genhd.c:659:17:    expected unsigned int [unsigned] [usertype] size
block/genhd.c:659:17:    got restricted gfp_t
block/genhd.c:659:29: warning: incorrect type in argument 2 (different base types)
block/genhd.c:659:29:    expected restricted gfp_t [usertype] flags
block/genhd.c:659:29:    got unsigned int
block: kmalloc args reversed
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      aeb3d3a8
    • T
      block: allow disk to have extended device number · 3e1a7ff8
      由 Tejun Heo 提交于 
      Now that disk and partition handlings are mostly unified, it's easy to
allow disk to have extended device number.  This patch makes
add_disk() use extended device number if disk->minors is zero.  Both
sd and ide-disk are updated to use this.

* sd_format_disk_name() is implemented which can generically determine
  the drive name.  This removes disk number restriction stemming from
  limited device names.

* If sd index goes over SD_MAX_DISKS (which can be increased now BTW),
  sd simply doesn't initialize minors letting block layer choose
  extended device number.

* If CONFIG_DEBUG_EXT_DEVT is set, both sd and ide-disk always set
  minors to 0 and use extended device numbers.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      3e1a7ff8
    • T
      block: replace @ext_minors with GENHD_FL_EXT_DEVT · 689d6fac
      由 Tejun Heo 提交于 
      With previous changes, it's meaningless to limit the number of
partitions.  Replace @ext_minors with GENHD_FL_EXT_DEVT such that
setting the flag allows the disk to have maximum number of allowed
partitions (only limited by the number of entries in parsed_partitions
as determined by MAX_PART constant).

This kills not-too-pretty alloc_disk_ext[_node]() functions and makes
@minors parameter to alloc_disk[_node]() unnecessary.  The parameter
is left alone to avoid disturbing the users.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      689d6fac
    • T
      block: make partition array dynamic · 540eed56
      由 Tejun Heo 提交于 
      disk->__part used to be statically allocated to the maximum possible
number of partitions.  This patch makes partition array allocation
dynamic.  The added overhead is minimal as only real change is one
memory dereference changed to RCU one.  This saves both a bit of
memory and cpu cycles iterating through unoccupied slots and makes
increasing partition limit easier.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      540eed56
    • T
      block: move stats from disk to part0 · 074a7aca
      由 Tejun Heo 提交于 
      Move stats related fields - stamp, in_flight, dkstats - from disk to
part0 and unify stat handling such that...

* part_stat_*() now updates part0 together if the specified partition
  is not part0.  ie. part_stat_*() are now essentially all_stat_*().

* {disk|all}_stat_*() are gone.

* part_round_stats() is updated similary.  It handles part0 stats
  automatically and disk_round_stats() is killed.

* part_{inc|dec}_in_fligh() is implemented which automatically updates
  part0 stats for parts other than part0.

* disk_map_sector_rcu() is updated to return part0 if no part matches.
  Combined with the above changes, this makes NULL special case
  handling in callers unnecessary.

* Separate stats show code paths for disk are collapsed into part
  stats show code paths.

* Rename disk_stat_lock/unlock() to part_stat_lock/unlock()

While at it, reposition stat handling macros a bit and add missing
parentheses around macro parameters.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      074a7aca
    • T
      block: kill GENHD_FL_FAIL and use part0->make_it_fail · eddb2e26
      由 Tejun Heo 提交于 
      GENHD_FL_FAIL for disk is what make_it_fail is for parts.  Kill it and
use part0->make_it_fail.  Sysfs node handling is unified too.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
      eddb2e26