- 09 5月, 2008 11 次提交
-
-
由 Christoph Hellwig 提交于
m32r can use the generic sys_pipe implementation. The current sys_pipe implementation on m32r only differes from the generic one by passing a lot of additional unused registers to sys_pipe. Reviewed and tested by Hirokazu Takata. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NHirokazu Takata <takata@linux-m32r.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
The cris implementation of sys_pipe only differs from the generic one by taking the BKL before calling do_pipe which isn't not nessecary. Just kill the cris implementation and use the generic one. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Nate Case 提交于
This printk() appears twice in the same function. Only the latter one in the inval_range: section appears to be legitimate. Signed-off-by: NNate Case <ncase@xes-inc.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Huang Weiyi 提交于
Remove duplicate #include of <asm/prom.h> in arch/powerpc/kernel/btext.c. Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This moves lockdep_init() to before udbg_early_init() as the later can call things that acquire spinlocks etc... This also makes printk safer to use earlier. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When debugging early boot problems, it's common to sprinkle printk's all over the place. However, on 64-bit powerpc, this can lead to memory corruption if done too early due to the PACA pointer and lockdep core not being initialized. This adds some comments to early_setup() that document when it is safe to do so in order to save time for whoever has to debug that stuff next. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
When doing lockdep, I had two patches to initialize paca->_current early, one bogus, and one correct. Unfortunately both got merged as the bad one ended up being part of the main lockdep patch by mistake. This causes memory corruption at boot. This removes the offending code. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
Changes the cputable so that various CPU families that have an exclusive CONFIG_ option have a more sensible default entry to use if the specific processor hasn't been identified. This makes the kernel more generally useful when booted on an unknown PVR for things like new 4xx variants. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
This reverts commit 9f8dacca, which was reported to break X startup (xf86-video-ati-6.8.0). See http://bugs.freedesktop.org/show_bug.cgi?id=15523 for details. Reported-by: NLaurence Withers <l@lwithers.me.uk> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Greg KH <greg@kroah.com> Cc: Jan Beulich <jbeulich@novell.com> Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ulrich Drepper 提交于
Remember to close the files if copy_to_user() failed. Spotted by dm.n9107@gmail.com. Signed-off-by: NUlrich Drepper <drepper@redhat.com> Cc: DM <dm.n9107@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 WANG Cong 提交于
'put_char' of 'struct tty_operations' has changed from 'void' into 'int'. This can also shut up compiler warnings. Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: NWANG Cong <wangcong@zeuux.org> Acked-by: NAlan Cox <alan@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 08 5月, 2008 4 次提交
-
-
由 Christoph Hellwig 提交于
We need to acquire the parent i_mutex with I_MUTEX_PARENT to keep lockdep happy. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Christoph Hellwig 提交于
We should not requeue the victim context in find_victim if the owner is not in spu_run. It's first not needed because leaving the context on the spu is an optimization and second is harmful because it means the owner could re-enter spu_run when the context is on the runqueue and trip the BUG_ON in __spu_update_sched_info. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 David S. Miller 提交于
We need to be more liberal about the alignment of the buffer given to us by sigaltstack(). The user should not need to be mindful of all of the alignment constraints we have for the stack frame. This mirrors how we handle this situation in clone() as well. Also, we align the stack even in non-SA_ONSTACK cases so that signals due to bad stack alignment can be delivered properly. This makes such errors easier to debug and recover from. Finally, add the sanity check x86 has to make sure we won't overflow the signal stack. This fixes glibc testcases nptl/tst-cancel20.c and nptl/tst-cancelx20.c Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
We clobber %i1 as well as %i0 for these system calls, because they give two return values. Therefore, on error, we have to restore %i1 properly or else the restart explodes since it uses the wrong arguments. This fixes glibc's nptl/tst-eintr1.c testcase. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 5月, 2008 11 次提交
-
-
由 Stas Sergeev 提交于
fix pcspkr dependancies: make the pcspkr platform drivers to depend on a platform device, and not the other way around. Signed-off-by: NStas Sergeev <stsp@aknet.ru> Acked-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDmitry Torokhov <dtor@mail.ru> CC: Vojtech Pavlik <vojtech@suse.cz> CC: Michael Opdenacker <michael-lists@free-electrons.com> [fixed for 2.6.26-rc1 by tiwai] Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David S. Miller 提交于
We should not conditionalize VA range checks on MAP_FIXED. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Martin Schwidefsky 提交于
Use the existing arch_alloc_page/arch_free_page callbacks to do the guest page state transitions between stable and unused. Acked-by: NRik van Riel <riel@redhat.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Roland McGrath 提交于
This removes redundant arch code for generic ptrace requests already handled by ptrace_request and compat_ptrace_request. It simplifies things to just have the standard entry points, and use the generic compat_sys_ptrace. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
From: Martin Schwidefsky <schwidefsky@de.ibm.com> This patch fixes a bug with cpu bound guest on kvm-s390. Sometimes it was impossible to deliver a signal to a spinning guest. We used preemption as a circumvention. The preemption notifiers called vcpu_load, which checked for pending signals and triggered a host intercept. But even with preemption, a sigkill was not delivered immediately. This patch changes the low level host interrupt handler to check for the SIE instruction, if TIF_WORK is set. In that case we change the instruction pointer of the return PSW to rerun the vcpu_run loop. The kvm code sees an intercept reason 0 if that happens. This patch adds accounting for these types of intercept as well. The advantages: - works with and without preemption - signals are delivered immediately - much better host latencies without preemption Acked-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
On return from syscall or interrupt, we have to check if we return to userspace (likely) and if there is work todo (less likely) to decide if we handle the work. We can optimize this check: we first check for the less likely work case and then check for userspace. This patch is also a preparation for an additional patch, that fixes a bug in KVM dealing with cpu bound guests. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Linus Torvalds 提交于
This reverts commit 22eecde2. Uli reports that it breaks UML on x86-64 with the Fedora 8 gcc (gcc 4.1.2), causing a crash on startup. See http://marc.info/?l=linux-kernel&m=121011722806093&w=2 for a trace. Reported-by: NUlrich Drepper <drepper@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
We die because we forget to convert initrd_start and initrd_end to virtual addresses. Reported by Mikael Pettersson Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hugh Dickins 提交于
Fix warning from pmd_bad() at bootup on a HIGHMEM64G HIGHPTE x86_32. That came from 9fc34113 x86: debug pmd_bad(); but we understand now that the typecasting was wrong for PAE in the previous version: pagetable pages above 4GB looked bad and stopped Arjan from booting. And revert that cded932b x86: fix pmd_bad and pud_bad to support huge pages. It was the wrong way round: we shouldn't weaken every pmd_bad and pud_bad check to let huge pages slip through - in part they check that we _don't_ have a huge page where it's not expected. Put the x86 pmd_bad() and pud_bad() definitions back to what they have long been: they can be improved (x86_32 should use PTE_MASK, to stop PAE thinking junk in the upper word is good; and x86_64 should follow x86_32's stricter comparison, to stop thinking any subset of required bits is good); but that should be a later patch. Fix Hans' good observation that follow_page() will never find pmd_huge() because that would have already failed the pmd_bad test: test pmd_huge in between the pmd_none and pmd_bad tests. Tighten x86's pmd_huge() check? No, once it's a hugepage entry, it can get quite far from a good pmd: for example, PROT_NONE leaves it with only ACCESSED of the KERN_PGTABLE bits. However... though follow_page() contains this and another test for huge pages, so it's nice to keep it working on them, where does it actually get called on a huge page? get_user_pages() checks is_vm_hugetlb_page(vma) to to call alternative hugetlb processing, as does unmap_vmas() and others. Signed-off-by: NHugh Dickins <hugh@veritas.com> Earlier-version-tested-by: NIngo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Chua <jeff.chua.linux@gmail.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christian Ehrhardt 提交于
This patch is fixes the sequoia.dts device tree file to use the values defined in the 440Epx data sheet from AMCC. That fixes an issue where some devices, including graphics cards, would not initialize properly because the PCI resource space was not big enough. Signed-off-by: NChristian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Stefan Roese 提交于
This patch adds basic endpoint support to the 4xx PCIe driver. This is done by checking the device_type property of the PCIe device node ("pci" for root-complex and "pci-endpoint" for endpoint configuration). Note: Currently we map a fixed 64MByte window to PLB address 0 (SDRAM). This should probably be configurable via a dts property. Signed-off-by: NStefan Roese <sr@denx.de> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 06 5月, 2008 9 次提交
-
-
由 Stefan Roese 提交于
The new 440x6 core used on AMCC 460EX/GT introduces new storage attibure fields to the TLB2 word. Those are: Bit 11 12 13 14 15 WL1 IL1I IL1D IL2I IL2D With these bits the cache (L1 and L2) can be configured in a more flexible way, instruction- and data-cache independently now. The "old" I and W bits are still available and setting these old bits will automically set these new bits too (for backward compatibilty). The current code does not clear these fields resulting in disabling the cache by chance. This patch now makes sure that these new bits are cleared when the TLB2 word is written. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Christoph Hellwig 提交于
Creating a spufs context or gand using spu_create should send an inotify event so that things like performance monitors have an easy way to find out about newly created contexts. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Ingo Molnar 提交于
add the HAVE_UNSTABLE_SCHED_CLOCK, for architectures to select. the next change utilizes it. Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Adrian Bunk 提交于
The identical online_page() implementations from all architectures got moved to mm/memory_hotplug.c - except for the sparc64 one that even was dead code due to MEMORY_HOTPLUG not being available there. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Finn Thain 提交于
Remove the rest of the old mac_esp driver. Also ditch the rest of the machw mechanism, it needs to be replaced by a fake openfirmware tree. Signed-off-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roman Zippel 提交于
Fix 68040 bus fault handling, so the standard kernel exception handling can be used for i/o probing. Contrary to normal access faults there is nothing to fix, but at least we have to disable writebacks to avoid recursive faults. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Noticed by Christoph Hellwig. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yinghai Lu 提交于
this change: | commit 08f1c192 | Author: Muli Ben-Yehuda <muli@il.ibm.com> | Date: Sun Jul 22 00:23:39 2007 +0300 | | x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata | | This patch introduces struct pci_sysdata to x86 and x86-64, and | converts the existing two users (NUMA, Calgary) to use it. | | This lays the groundwork for having other users of sysdata, such as | the PCI domains work. | | The Calgary bits are tested, the NUMA bits just look ok. replaces pcibios_scan_root with pci_scan_bus_parented... but in pcibios_scan_root we have a DMI check: dmi_check_system(pciprobe_dmi_table); when when have several peer root buses this could be called multiple times (which is bad), so move that call to pci_access_init(). Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
由 Yinghai Lu 提交于
so we don't align the io port start address for pci cards. also move out dmi check out acpi.c, because it has nothing to do with acpi. it could spare some calling when we have several peer root buses. Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 05 5月, 2008 5 次提交
-
-
由 Denis V. Lunev 提交于
Simply replace proc_create and further data assigned with proc_create_data. No need to check for data!=NULL after that. Signed-off-by: NDenis V. Lunev <den@openvz.org> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Emil Medve 提交于
We provide an ioremap_flags, so this provides a corresponding devm_ioremap_prot. The slight name difference is at Ben Herrenschmidt's request as he plans on changing ioremap_flags to ioremap_prot in the future. Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Acked-by: NTejun Heo <htejun@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Luke Browning 提交于
Currently, page fault handlers don't issue a mfc restart if the context switch pending flag is set, which can leave us with a hanging DMA after a context restore. This patch introduces fault pending flag that is set by the fault handler and read by the context switch code, so that the latter can add the restart bit at the right spot, after it has successfuly saved the state of the mfc control register. Signed-off-by: NLuke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Luke Browning 提交于
SPU class 0 & 1 exceptions may occur in parallel, so we may end up overwriting csa.dsisr. This change adds dedicated fields for each class to the spu and the spu context so that fault data is not overwritten. Signed-off-by: NLuke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-
由 Luke Browning 提交于
Currently, we re-route SPU interrupts to the current cpu, which may be on a remote node. In the case of time slicing, all spu interrupts will end up routed to the same cpu, where the spusched_tick occurs. This change routes mfc interrupts to the cpu where the controlling thread last ran, provided that cpu is on the same node as the spu (otherwise don't reroute interrupts). This should improve performance and provide a more predictable environment for processing spu exceptions. In the past we have seen concurrent delivery of spu exceptions to two cpus. This eliminates that concern. Signed-off-by: NLuke Browning <lukebr@linux.vnet.ibm.com> Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
-