While the zerocopy method is correctly omitted if user space
does not support unaligned Netlink messages. The attribute is
still not padded correctly as skb_zerocopy() will not ensure
padding and the attribute size is no longer pre calculated
though nla_reserve() which ensured padding previously.

This patch applies appropriate padding if a linear data copy
was performed in skb_zerocopy().
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NZoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Several functions and datastructures could be local
Found with 'make namespacecheck'
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NJesse Gross <jesse@nicira.com>

The copy & csum optimization is no longer present with zerocopy
enabled. Compute the checksum in skb_gso_segment() directly by
dropping the HW CSUM capability from the features passed in.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Use of skb_zerocopy() can avoid the expensive call to memcpy()
when copying the packet data into the Netlink skb. Completes
checksum through skb_checksum_help() if not already done in
GSO segmentation.

Zerocopy is only performed if user space supported unaligned
Netlink messages. memory mapped netlink i/o is preferred over
zerocopy if it is set up.

Cost of upcall is significantly reduced from:
+   7.48%       vhost-8471  [k] memcpy
+   5.57%     ovs-vswitchd  [k] memcpy
+   2.81%       vhost-8471  [k] csum_partial_copy_generic

to:
+   5.72%     ovs-vswitchd  [k] memcpy
+   3.32%       vhost-5153  [k] memcpy
+   0.68%       vhost-5153  [k] skb_zerocopy

(megaflows disabled)
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Allows removing the net and dp_ifindex argument and simplify the
code.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Drop user features if an outdated user space instance that does not
understand the concept of user_features attempted to create a new
datapath.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Reviewed-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

With mega flow implementation ovs flow can be shared between
multiple CPUs which makes stats updates highly contended
operation. This patch uses per-CPU stats in cases where a flow
is likely to be shared (if there is a wildcard in the 5-tuple
and therefore likely to be spread by RSS). In other situations,
it uses the current strategy, saving memory and allocation time.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Use memory mapped Netlink i/o for all unicast openvswitch
communication if a ring has been set up.

Benchmark
  * pktgen -> ovs internal port
  * 5M pkts, 5M flows
  * 4 threads, 8 cores

Before:
Result: OK: 67418743(c67108212+d310530) usec, 5000000 (9000byte,0frags)
  74163pps 5339Mb/sec (5339736000bps) errors: 0
	+   2.98%     ovs-vswitchd  [k] copy_user_generic_string
	+   2.49%     ovs-vswitchd  [k] memcpy
	+   1.84%       kpktgend_2  [k] memcpy
	+   1.81%       kpktgend_1  [k] memcpy
	+   1.81%       kpktgend_3  [k] memcpy
	+   1.78%       kpktgend_0  [k] memcpy

After:
Result: OK: 24229690(c24127165+d102524) usec, 5000000 (9000byte,0frags)
  206358pps 14857Mb/sec (14857776000bps) errors: 0
	+   2.80%     ovs-vswitchd  [k] memcpy
	+   1.31%       kpktgend_2  [k] memcpy
	+   1.23%       kpktgend_0  [k] memcpy
	+   1.09%       kpktgend_1  [k] memcpy
	+   1.04%       kpktgend_3  [k] memcpy
	+   0.96%     ovs-vswitchd  [k] copy_user_generic_string
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Reviewed-by: NDaniel Borkmann <dborkman@redhat.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Flow lookup can happen either in packet processing context or userspace
context but it was annotated as requiring RCU read lock to be held. This
also allows OVS mutex to be held without causing warnings.
Reported-by: NJustin Pettit <jpettit@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Reviewed-by: NThomas Graf <tgraf@redhat.com>

API changes only for code readability. No functional chnages.

This patch removes the underscored version. Added a new API
ovs_flow_tbl_lookup_stats() that returns the n_mask_hits.

Reported by: Ben Pfaff <blp@nicira.com>
Reviewed-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Register generic netlink multicast groups as an array with
the family and give them contiguous group IDs. Then instead
of passing the global group ID to the various functions that
send messages, pass the ID relative to the family - for most
families that's just 0 because the only have one group.

This avoids the list_head and ID in each group, adding a new
field for the mcast group ID offset to the family.

At the same time, this allows us to prevent abusing groups
again like the quota and dropmon code did, since we can now
check that a family only uses a group it owns.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This doesn't really change anything, but prepares for the
next patch that will change the APIs to pass the group ID
within the family, rather than the global group ID.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a static inline to generic netlink to wrap netlink_set_err()
to make it easier to use here - use it in openvswitch (the only
generic netlink user of netlink_set_err()).
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:

@@
identifier ops;
@@
+const
 struct genl_ops ops[] = {
 ...
 };

(except the struct thing in net/openvswitch/datapath.c)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In order to enable lockdep on seqcount/seqlock structures, we
must explicitly initialize any locks.

The u64_stats_sync structure, uses a seqcount, and thus we need
to introduce a u64_stats_init() function and use it to initialize
the structure.

This unfortunately adds a lot of fairly trivial initialization code
to a number of drivers. But the benefit of ensuring correctness makes
this worth while.

Because these changes are required for lockdep to be enabled, and the
changes are quite trivial, I've not yet split this patch out into 30-some
separate patches, as I figured it would be better to get the various
maintainers thoughts on how to best merge this change along with
the seqcount lockdep enablement.

Feedback would be appreciated!
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NJulian Anastasov <ja@ssi.bg>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jesse Gross <jesse@nicira.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Roger Luethi <rl@hellgate.ch>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Simon Horman <horms@verge.net.au>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Wensong Zhang <wensong@linux-vs.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-2-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Widen TCP flags handling from 7 bits (uint8_t) to 12 bits (uint16_t).
The kernel interface remains at 8 bits, which makes no functional
difference now, as none of the higher bits is currently of interest
to the userspace.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Collect mega flow mask stats. ovs-dpctl show command can be used to
display them for debugging and performance tuning.
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Hides mega-flow implementation in flow_table.c rather than
datapath.c.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

ovs-flow rehash does not touch mega flow list. Following patch
moves it dp struct datapath.  Avoid one extra indirection for
accessing mega-flow list head on every packet receive.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Over the time datapath.c and flow.c has became pretty large files.
Following patch restructures functionality of component into three
different components:

flow.c: contains flow extract.
flow_netlink.c: netlink flow api.
flow_table.c: flow table api.

This patch restructures code without changing logic.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Rehashing in ovs-workqueue can cause ovs-mutex lock contentions
in case of heavy flow setups where both needs ovs-mutex.  So by
moving rehashing to flow-setup we can eliminate contention.
This also simplify ovs locking and reduces dependence on
workqueue.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

This patch adds support for rewriting SCTP src,dst ports similar to the
functionality already available for TCP/UDP.

Rewriting SCTP ports is expensive due to double-recalculation of the
SCTP checksums; this is performed to ensure that packets traversing OVS
with invalid checksums will continue to the destination with any
checksum corruption intact.
Reviewed-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NJoe Stringer <joe@wand.net.nz>
Signed-off-by: NBen Pfaff <blp@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Add wildcarded flow support in kernel datapath.

Wildcarded flow can improve OVS flow set up performance by avoid sending
matching new flows to the user space program. The exact performance boost
will largely dependent on wildcarded flow hit rate.

In case all new flows hits wildcard flows, the flow set up rate is
within 5% of that of linux bridge module.

Pravin has made significant contributions to this patch. Including API
clean ups and bug fixes.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

RCUfy dp-dump operation which is already read-only. This
makes all ovs dump operations lockless.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Flow dump operation is read-only operation.  There is no need to
take ovs-lock.  Following patch use rcu-lock for dumping flows.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

git silently included an extra hunk in vport_cmd_set() during
automatic merging. This code is unreachable so it does not actually
introduce a problem but it is clearly incorrect.
Signed-off-by: NJesse Gross <jesse@nicira.com>

Following patch adds start offset for sw_flow-key, so that we can
skip tunneling information in key for non-tunnel flows.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add ovs tunnel interface for set tunnel action for userspace.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than validating actions and then copying all actiaons
in one block, following patch does same operation in single pass.
This validate and copy action one by one. This is required for
ovs tunneling patch.

This patch does not change any functionality.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is not functional change, this is just code cleanup.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

It is an error to try to change the type of a vport using the set
command. However, while we check that this is an error, we still
proceed to allocate memory which then gets freed immediately.
This stops processing after noticing the error, which does not
actually fix a bug but is more correct.
Signed-off-by: NJesse Gross <jesse@nicira.com>

The only user is get_dpifindex(), no need to redirect via the port
operations.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

OVS locking was recently changed to have private OVS lock which
simplified overall locking.  Therefore there is no need to have
another global genl lock to protect OVS data structures.  Following
patch uses of parallel_ops genl family for OVS.  This also allows
more granual OVS locking using ovs_mutex for protecting OVS data
structures, which gives more concurrencey.  E.g multiple genl
operations OVS_PACKET_CMD_EXECUTE can run in parallel, etc.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a protocol argument to the VLAN packet tagging functions. In case of HW
tagging, we need that protocol available in the ndo_start_xmit functions,
so it is stored in a new field in the skb. The new field fits into a hole
(on 64 bit) and doesn't increase the sks's size.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently OVS uses combination of genl and rtnl lock to protect
datapath state.  This was done due to networking stack locking.
But this has complicated locking and there are few lock ordering
issues with new tunneling protocols.
Following patch simplifies locking by introducing new ovs mutex
and now this lock is used to protect entire ovs state.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Kills the FLOW_BUFSIZE constant which needs to be calculated manually
and replaces it with key_attr_size() based on nla_total_size().
Calculates the size of datapath messages instead of relying on
NLMSG_DEFAULT_SIZE and moves the existing message size calculations
into own functions for clarity.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Less error prone as it takes into account the length of both the
destination buffer and the source attribute and documents when
data is copied from an attribute.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NJesse Gross <jesse@nicira.com>