- 22 7月, 2006 9 次提交
-
-
由 Samuel Ortiz 提交于
As pointed out by Christoph Hellwig, dev_alloc_skb() is not intended to be used for allocating TX sk_buff. The IrDA stack was exclusively calling dev_alloc_skb() on the TX path, and this patch fixes that. Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
Every file should #include the headers containing the prototypes for its global functions. Especially in cases like this one where gcc can tell us through a compile error that the prototype was wrong... Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
This implements Rules D1 and D4 of Sec 4.3 in the ADDIP draft. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Currently there is a code path in sctp_eat_data() where it is possible to set this flag even when we are dropping this chunk. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
This patch implements Path Initialization procedure as described in Sec 2.36 of RFC4460. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
This prevents a race between the close of a socket and receive of an incoming packet. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sridhar Samudrala 提交于
Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guillaume Chazarain 提交于
CONFIG_DEBUG_SLAB found the following bug: netem_enqueue() in sch_netem.c gets a pointer inside a slab object: struct netem_skb_cb *cb = (struct netem_skb_cb *)skb->cb; But then, the slab object may be freed: skb = skb_unshare(skb, GFP_ATOMIC) cb is still pointing inside the freed skb, so here is a patch to initialize cb later, and make it clear that initializing it sooner is a bad idea. [From Stephen Hemminger: leave cb unitialized in order to let gcc complain in case of use before initialization] Signed-off-by: NGuillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Now that we always zero the IPCB->opts in ip_rcv, it is no longer necessary to do so before calling netif_rx for tunneled packets. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2006 1 次提交
-
-
由 Jeff Garzik 提交于
Noticed by Willy Tarreau. Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 16 7月, 2006 1 次提交
-
-
由 Dave Jones 提交于
net/sched/sch_htb.c: In function 'htb_change_class': net/sched/sch_htb.c:1605: error: expected ';' before 'do_gettimeofday' Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 7月, 2006 2 次提交
-
-
由 Stephen Hemminger 提交于
The upper bound for HTB time diff needs to be scaled to PSCHED units rather than just assuming usecs. The field mbuffer is used in TDIFF_SAFE(), as an upper bound. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
when data arrives at IP through loopback (and possibly other devices). So the field needs to be cleared before it confuses the route code. This was seen when running netem over loopback, but there are probably other device cases. Maybe this should go into stable? Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 7月, 2006 1 次提交
-
-
由 Herbert Xu 提交于
When pskb_trim has to defer to ___pksb_trim to trim the frag_list part of the packet, the frag_list is not updated to reflect the trimming. This will usually work fine until you hit something that uses the packet length or tail from the frag_list. Examples include esp_output and ip_fragment. Another problem caused by this is that you can end up with a linear packet with a frag_list attached. It is possible to get away with this if we audit everything to make sure that they always consult skb->len before going down onto frag_list. In fact we can do the samething for the paged part as well to avoid copying the data area of the skb. For now though, let's do the conservative fix and update frag_list. Many thanks to Marco Berizzi for helping me to track down this bug. This 4-year old bug took 3 months to track down. Marco was very patient indeed :) Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 7月, 2006 16 次提交
-
-
由 Ian McDonald 提交于
__sk_stream_mem_reclaim is only called by sk_stream_mem_reclaim. As such the check on sk->sk_forward_alloc is not needed and can be removed. Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcel Holtmann 提交于
The Bluetooth L2CAP layer has 2 locks that are used in softirq context, (one spinlock and one rwlock, where the softirq usage is readlock) but where not all usages of the lock were _bh safe. The patch below corrects this. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch lets BT_HIDP depend on instead of select INPUT. This fixes the following warning during an s390 build: net/bluetooth/hidp/Kconfig:4:warning: 'select' used by config symbol 'BT_HIDP' refer to undefined symbol 'INPUT' A dependency on INPUT also implies !S390 (and therefore makes the explicit dependency obsolete) since INPUT is not available on s390. The practical difference should be nearly zero, since INPUT is always set to y unless EMBEDDED=y (or S390=y). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Marcel Holtmann 提交于
This patch makes the remaining transitions to use kzalloc(). Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
由 Herbert Xu 提交于
The error handling around fib_insert_node was broken because we always zeroed the error before checking it. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
NETROM network devices are virtual network devices encapsulating NETROM frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
ROSE network devices are virtual network devices encapsulating ROSE frames into AX.25 which will be sent through an AX.25 device, so form a special "super class" of normal net devices; split their locks off into a separate class since they always nest. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Right now all uses of the ax25_list_lock lock are _bh locks but knowing some code is only ever getting invoked from _bh context we can better. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The truesize check has uncovered the fact that we forgot to update truesize after pskb_expand_head. Unfortunately pskb_expand_head can't update it for us because it's used in all sorts of different contexts, some of which would not allow truesize to be updated by itself. So the solution for now is to simply update it in IPComp. This patch also changes skb_put to __skb_put since we've just expanded tailroom by exactly that amount so we know it's there (but gcc does not). Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki 提交于
In the source address selection, the address must be sorted from global to node-local. But, ifp->scope is different from the scope for source address selection. 2001::1 fe80::1 ::1 ifp->scope 0 0x02 0x01 ipv6_addr_src_scope(&ifp->addr) 0x0e 0x02 0x01 So, we need to use ipv6_addr_src_scope(&ifp->addr) for sorting. And, for backward compatibility, addresses should be sorted from new one to old one. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: NBrian Haley <brian.haley@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xiaoliang (David) Wei 提交于
I think there is still a problem with the AIMD parameter update in HighSpeed TCP code. Line 125~138 of the code (net/ipv4/tcp_highspeed.c): /* Update AIMD parameters */ if (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai < HSTCP_AIMD_MAX - 1) ca->ai++; } else if (tp->snd_cwnd < hstcp_aimd_vals[ca->ai].cwnd) { while (tp->snd_cwnd > hstcp_aimd_vals[ca->ai].cwnd && ca->ai > 0) ca->ai--; In fact, the second part (decreasing ca->ai) never decreases since the while loop's inequality is in the reverse direction. This leads to unfairness with multiple flows (once a flow happens to enjoy a higher ca->ai, it keeps enjoying that even its cwnd decreases) Here is a tentative fix (I also added a comment, trying to keep the change clear): Acked-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Acked-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
nr_destroy_socket takes the socket lock itself so it should better be called with the socket unlocked. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
When establishing a new circuit in nr_rx_frame the locks are taken in a different order than in the rest of the stack. This should be harmless but triggers lockdep. Either way, reordering the code a little solves the issue. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
Delivery of AX.25 frame to the layer 3 protocols happens in softirq context so locking needs to be bh-proof. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Brian Haley 提交于
If IPv6 addresses are ordered by scope, then ipv6_dev_get_saddr() can break-out of the device addr_list for() loop when the candidate source address scope is less than the destination address scope. Signed-off-by: NBrian Haley <brian.haley@hp.com> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 7月, 2006 4 次提交
-
-
由 Alan Cox 提交于
No actual bugs that I can see just a couple of unmarked casts getting annoying in my debug log files. Signed-off-by: NAlan Cox <alan@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts: f890f921 The inclusion of TCP Compound needs to be reverted at this time because it is not 100% certain that this code conforms to the requirements of Developer's Certificate of Origin 1.1 paragraph (b). Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The variable peer_total is protected by a lock. The volatile marker makes no sense. This shaves off 20 bytes on i386. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ralf Baechle 提交于
This volatile makes no sense - not even wearing pink shades ... Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 7月, 2006 3 次提交
-
-
由 Ralf Baechle 提交于
Replace kzalloc instead of kmalloc + memset. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Adrian Bunk 提交于
This patch fixes the following compile error with CONFIG_PROC_FS=n by reverting commit dcdb0275: <-- snip --> ... CC net/atm/clip.o net/atm/clip.c: In function ‘atm_clip_init’: net/atm/clip.c:975: error: ‘atm_proc_root’ undeclared (first use in this function) net/atm/clip.c:975: error: (Each undeclared identifier is reported only once net/atm/clip.c:975: error: for each function it appears in.) net/atm/clip.c:977: error: ‘arp_seq_fops’ undeclared (first use in this function) make[2]: *** [net/atm/clip.o] Error 1 <-- snip --> Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Module reference needs to be given back if message header construction fails. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 7月, 2006 3 次提交
-
-
由 Patrick McHardy 提交于
When more rules are present than fit in a single skb, the remaining rules are incorrectly skipped. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
Certain subsystems in the stack (e.g., netfilter) can break the partial checksum on GSO packets. Until they're fixed, this patch allows this to work by recomputing the partial checksums through the GSO mechanism. Once they've all been converted to update the partial checksum instead of clearing it, this workaround can be removed. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-