Commit 288dab8a ("block: add a separate operation type for secure
erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering
all the places REQ_OP_DISCARD was being used to mean either. Fix those.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Fixes: 288dab8a ("block: add a separate operation type for secure erase")
Signed-off-by: NJens Axboe <axboe@fb.com>

Since commit 63a4cc24, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.

No intended functional changes in this commit.
Signed-off-by: NJens Axboe <axboe@fb.com>

The blktrace code stores the current time in a 32-bit word in its
user interface. This is a bad idea because 32-bit seconds overflow
at some point.

We probably have until 2106 before this one overflows, as it seems
to use an 'unsigned' variable, but we should confirm that user
space treats it the same way.

Aside from this, we want to stop using 'struct timespec' here,
so I'm adding a comment about the overflow and change the code
to use timespec64 instead to make the loss of range more obvious.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

This adds a REQ_OP_FLUSH operation that is sent to request_fn
based drivers by the block layer's flush code, instead of
sending requests with the request->cmd_flags REQ_FLUSH bit set.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Have blktrace use the req/bio op accessor to get the REQ_OP.
Signed-off-by: NMike Christie <mchristi@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

BLK_TC_NOTIFY is missed in mask_maps, so we can't print out notify or
set mask with 'notify' name.
Signed-off-by: NShaohua Li <shli@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

commit f4a1d08c introduces a regression. Originally for
BLK_TN_MESSAGE, we add message in trace and return. The commit ignores
the early return and add garbage info.
Signed-off-by: NShaohua Li <shli@fb.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Use the more common logging method with the eventual goal of removing
pr_warning altogether.

Miscellanea:

 - Realign arguments
 - Coalesce formats
 - Add missing space between a few coalesced formats
Signed-off-by: NJoe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>	[kernel/power/suspend.c]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This is really about simplifying the double xchg patterns into
a single cmpxchg, with the same logic. Other than the immediate
cleanup, there are some subtleties this change deals with:

(i) While the load of the old bt is fully ordered wrt everything,
ie:

        old_bt = xchg(&q->blk_trace, bt);             [barrier]
        if (old_bt)
	     (void) xchg(&q->blk_trace, old_bt);    [barrier]

blk_trace could still be changed between the xchg and the old_bt
load. Note that this description is merely theoretical and afaict
very small, but doing everything in a single context with cmpxchg
closes this potential race.

(ii) Ordering guarantees are obviously kept with cmpxchg.

(iii) Gets rid of the hacky-by-nature (void)xchg pattern.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
eviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In preparation to make trace options per instance, the global trace_flags
needs to be moved from being a global variable to a field within the trace
instance trace_array structure.

There's still more work to do, as there's some functions that use
trace_flags without passing in a way to get to the current_trace array. For
those, the global_trace is used directly (from trace.c). This includes
setting and clearing the trace_flags. This means that when a new instance is
created, it just gets the trace_flags of the global_trace and will not be
able to modify them. Depending on the functions that have access to the
trace_array, the flags of an instance may not affect parts of its trace,
where the global_trace is used. These will be fixed in future changes.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

In preparation for having trace options be per instance, the trace_array
needs to be passed to the trace_buffer_unlock_commit(). The
trace_event_buffer_lock_reserve() already passes in the trace_event_file
where the trace_array can be derived from.

Also added a "__init" to the boot up test event plus function tracing
function function_test_events_call().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently we have two different ways to signal an I/O error on a BIO:

 (1) by clearing the BIO_UPTODATE flag
 (2) by returning a Linux errno value to the bi_end_io callback

The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario.  Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.

So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Reviewed-by: NNeilBrown <neilb@suse.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Part of the disassembly of do_blk_trace_setup:

    231b:       e8 00 00 00 00          callq  2320 <do_blk_trace_setup+0x50>
                        231c: R_X86_64_PC32     strlen+0xfffffffffffffffc
    2320:       eb 0a                   jmp    232c <do_blk_trace_setup+0x5c>
    2322:       66 0f 1f 44 00 00       nopw   0x0(%rax,%rax,1)
    2328:       48 83 c3 01             add    $0x1,%rbx
    232c:       48 39 d8                cmp    %rbx,%rax
    232f:       76 47                   jbe    2378 <do_blk_trace_setup+0xa8>
    2331:       41 80 3c 1c 2f          cmpb   $0x2f,(%r12,%rbx,1)
    2336:       75 f0                   jne    2328 <do_blk_trace_setup+0x58>
    2338:       41 c6 04 1c 5f          movb   $0x5f,(%r12,%rbx,1)
    233d:       4c 89 e7                mov    %r12,%rdi
    2340:       e8 00 00 00 00          callq  2345 <do_blk_trace_setup+0x75>
                        2341: R_X86_64_PC32     strlen+0xfffffffffffffffc
    2345:       eb e1                   jmp    2328 <do_blk_trace_setup+0x58>

Yep, that's right: gcc isn't smart enough to realize that replacing '/' by
'_' cannot change the strlen(), so we call it again and again (at least
when a '/' is found).  Even if gcc were that smart, this construction
would still loop over the string twice, once for the initial strlen() call
and then the open-coded loop.

Let's simply use strreplace() instead.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Liked-by: NJens Axboe <axboe@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The name "ftrace" really refers to the function hook infrastructure. It
is not about the trace_events. The functions (un)register_ftrace_event() is
really about trace_events, and the name should be register_trace_event()
instead.

Also renamed ftrace_event_reg() to trace_event_reg() for the same reason.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently, blktrace can be started/stopped via its ioctl-based interface
(used by the userspace blktrace tool) or via its ftrace interface. The
function blk_trace_remove_queue(), called each time an "enable" tunable
of the ftrace interface transitions to zero, removes the trace from the
running list, even if no function from the sysfs interface adds it to
such a list. This leads to a null pointer dereference.  This commit
changes the blk_trace_remove_queue() function so that it does not remove
the blk_trace from the running list.

v2:
    - Now the patch removes the invocation of list_del() instead of
      adding an useless if branch, as suggested by Namhyung Kim.
Signed-off-by: NArianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Checking the return code of every trace_seq_printf() operation and having
to return early if it overflowed makes the code messy.

Using the new trace_seq_has_overflowed() and trace_handle_return() functions
allows us to clean up the code.

In the future, trace_seq_printf() and friends will be turning into void
functions and not returning a value. The trace_seq_has_overflowed() is to
be used instead. This cleanup allows that change to take place.

Cc: Jens Axboe <axboe@fb.com>
Reviewed-by: NPetr Mladek <pmladek@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

trace_block_rq_complete does not take into account that request can
be partially completed, so we can get the following incorrect output
of blkparser:

  C   R 232 + 240 [0]
  C   R 240 + 232 [0]
  C   R 248 + 224 [0]
  C   R 256 + 216 [0]

but should be:

  C   R 232 + 8 [0]
  C   R 240 + 8 [0]
  C   R 248 + 8 [0]
  C   R 256 + 8 [0]

Also, the whole output summary statistics of completed requests and
final throughput will be incorrect.

This patch takes into account real completion size of the request and
fixes wrong completion accounting.
Signed-off-by: NRoman Pen <r.peniaev@gmail.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: linux-kernel@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: NJens Axboe <axboe@fb.com>

As options (flags) may affect instances instead of being global
the set_flag() callbacks need to receive the trace_array descriptor
of the instance they will be modifying.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Immutable biovecs are going to require an explicit iterator. To
implement immutable bvecs, a later patch is going to add a bi_bvec_done
member to this struct; for now, this patch effectively just renames
things.
Signed-off-by: NKent Overstreet <kmo@daterainc.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Ed L. Cashin" <ecashin@coraid.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@inktank.com>
Cc: ceph-devel@vger.kernel.org
Cc: Joshua Morris <josh.h.morris@us.ibm.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: Benny Halevy <bhalevy@tonian.com>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Dave Kleikamp <shaggy@kernel.org>
Cc: Joern Engel <joern@logfs.org>
Cc: Prasad Joshi <prasadjoshi.linux@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Ben Myers <bpm@sgi.com>
Cc: xfs@oss.sgi.com
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Guo Chao <yan@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Asai Thambi S P <asamymuthupa@micron.com>
Cc: Selvan Mani <smani@micron.com>
Cc: Sam Bradshaw <sbradshaw@micron.com>
Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: "Roger Pau Monné" <roger.pau@citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jerome Marchand <jmarchand@redhat.com>
Cc: Joe Perches <joe@perches.com>
Cc: Peng Tao <tao.peng@emc.com>
Cc: Andy Adamson <andros@netapp.com>
Cc: fanchaoting <fanchaoting@cn.fujitsu.com>
Cc: Jie Liu <jeff.liu@oracle.com>
Cc: Sunil Mushran <sunil.mushran@gmail.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Pankaj Kumar <pankaj.km@samsung.com>
Cc: Dan Magenheimer <dan.magenheimer@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>6

do_blk_trace_setup() will fully initialize 'buts.name', so can remove
the related memcpy(). And also use BLKTRACE_BDEV_SIZE and ARRAY_SIZE
instead of hard code number '32'.
Signed-off-by: NChen Gang <gang.chen@asianux.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently each task sends BLK_TN_PROCESS event to the first traced
device it interacts with after a new trace is started. When there are
several traced devices and the task accesses more devices, this logic
can result in BLK_TN_PROCESS being sent several times to some devices
while it is never sent to other devices. Thus blkparse doesn't display
command name when parsing some blktrace files.

Fix the problem by sending BLK_TN_PROCESS event to all traced devices
when a task interacts with any of them.
Signed-off-by: NJan Kara <jack@suse.cz>
Review-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This reverts commit 3a366e61.

Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.

Jens says:
 "It's not quite clear why that is yet, so I think we should just revert
  the commit for 3.9 final (which I'm assuming is pretty close).

  The wifi is crap at the LSF hotel, so sending this email instead of
  queueing up a revert and pull request."
Reported-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: NJens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Exported so it can be used by bcache's tracepoints
Signed-off-by: NKent Overstreet <koverstreet@google.com>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Ingo Molnar <mingo@redhat.com>

Currently, the way the latency tracers and snapshot feature works
is to have a separate trace_array called "max_tr" that holds the
snapshot buffer. For latency tracers, this snapshot buffer is used
to swap the running buffer with this buffer to save the current max
latency.

The only items needed for the max_tr is really just a copy of the buffer
itself, the per_cpu data pointers, the time_start timestamp that states
when the max latency was triggered, and the cpu that the max latency
was triggered on. All other fields in trace_array are unused by the
max_tr, making the max_tr mostly bloat.

This change removes the max_tr completely, and adds a new structure
called trace_buffer, that holds the buffer pointer, the per_cpu data
pointers, the time_start timestamp, and the cpu where the latency occurred.

The trace_array, now has two trace_buffers, one for the normal trace and
one for the max trace or snapshot. By doing this, not only do we remove
the bloat from the max_trace but the instances of traces can now use
their own snapshot feature and not have just the top level global_trace have
the snapshot feature and latency tracers for itself.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

typeof(&buffer) is a pointer to array of 1024 char, or char (*)[1024].
But, typeof(&buffer[0]) is a pointer to char which match the return type of get_trace_buf().
As well-known, the value of &buffer is equal to &buffer[0].
so return this_cpu_ptr(&percpu_buffer->buffer[0]) can avoid type cast.

Link: http://lkml.kernel.org/r/50A1A800.3020102@gmail.comReviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NShan Wei <davidshan@tencent.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

bio_{front|back}_merge tracepoints report a bio merging into an
existing request but didn't specify which request the bio is being
merged into.  Add @req to it.  This makes it impossible to share the
event template with block_bio_queue - split it out.

@req isn't used or exported to userland at this point and there is no
userland visible behavior change.  Later changes will make use of the
extra parameter.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

bio completion didn't kick block_bio_complete TP.  Only dm was
explicitly triggering the TP on IO completion.  This makes
block_bio_complete TP useless for tracers which want to know about
bios, and all other bio based drivers skip generating blktrace
completion events.

This patch makes all bio completions via bio_endio() generate
block_bio_complete TP.

* Explicit trace_block_bio_complete() invocation removed from dm and
  the trace point is unexported.

* @rq dropped from trace_block_bio_complete().  bios may fly around
  w/o queue associated.  Verifying and accessing the assocaited queue
  belongs to TP probes.

* blktrace now gets both request and bio completions.  Make it ignore
  bio completions if request completion path is happening.

This makes all bio based drivers generate blktrace completion events
properly and makes the block_bio_complete TP actually useful.

v2: With this change, block_bio_complete TP could be invoked on sg
    commands which have bio's with %NULL bi_bdev.  Update TP
    assignment code to check whether bio->bi_bdev is %NULL before
    dereferencing.
Signed-off-by: NTejun Heo <tj@kernel.org>
Original-patch-by: NNamhyung Kim <namhyung@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Many users of debugfs copy the implementation of default_open() when
they want to support a custom read/write function op.  This leads to a
proliferation of the default_open() implementation across the entire
tree.

Now that the common implementation has been consolidated into libfs we
can replace all the users of this function with simple_open().

This replacement was done with the following semantic patch:

<smpl>
@ open @
identifier open_f != simple_open;
identifier i, f;
@@
-int open_f(struct inode *i, struct file *f)
-{
(
-if (i->i_private)
-f->private_data = i->i_private;
|
-f->private_data = i->i_private;
)
-return 0;
-}

@ has_open depends on open @
identifier fops;
identifier open.open_f;
@@
struct file_operations fops = {
...
-.open = open_f,
+.open = simple_open,
...
};
</smpl>

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

These files were getting <linux/module.h> via an implicit non-obvious
path, but we want to crush those out of existence since they cost
time during compiles of processing thousands of lines of headers
for no reason.  Give them the lightweight header that just contains
the EXPORT_SYMBOL infrastructure.
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>

Add FLUSH/FUA support to blktrace. As FLUSH precedes WRITE and/or
FUA follows WRITE, use the same 'F' flag for both cases and
distinguish them by their (relative) position. The end results
look like (other flags might be shown also):

 - WRITE:            W
 - WRITE_FLUSH:      FW
 - WRITE_FUA:        WF
 - WRITE_FLUSH_FUA:  FWF

Note that we reuse TC_BARRIER due to lack of bit space of act_mask
so that the older versions of blktrace tools will report flush
requests as barriers from now on.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

It's a pretty close match to what we had before - the timer triggering
would mean that nobody unplugged the plug in due time, in the new
scheme this matches very closely what the schedule() unplug now is.
It's essentially the difference between an explicit unplug (IO unplug)
or an implicit unplug (timer unplug, we scheduled with pending IO
queued).
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

It was removed with the on-stack plugging, readd it and track the
depth of requests added when flushing the plug.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We no longer have an unplug timer running, so no point in keeping
the trace point.
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

In blk_add_trace_rq, we only chose the minor 2 bits from
request's cmd_flags and did some check for discard.
so most of other flags(e.g, REQ_SYNC) are missing.

For example, with a sync write after blkparse we get:
  8,16   1        1     0.001776503  7509  A  WS 1349632 + 1024 <- (8,17) 1347584
  8,16   1        2     0.001776813  7509  Q  WS 1349632 + 1024 [dd]
  8,16   1        3     0.001780395  7509  G  WS 1349632 + 1024 [dd]
  8,16   1        5     0.001783186  7509  I   W 1349632 + 1024 [dd]
  8,16   1       11     0.001816987  7509  D   W 1349632 + 1024 [dd]
  8,16   0        2     0.006218192     0  C   W 1349632 + 1024 [0]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to __blk_add_trace.

With this patch, after a sync write we get:
  8,16   1        1     0.001776900  5425  A  WS 1189888 + 1024 <- (8,17) 1187840
  8,16   1        2     0.001777179  5425  Q  WS 1189888 + 1024 [dd]
  8,16   1        3     0.001780797  5425  G  WS 1189888 + 1024 [dd]
  8,16   1        5     0.001783402  5425  I  WS 1189888 + 1024 [dd]
  8,16   1       11     0.001817468  5425  D  WS 1189888 + 1024 [dd]
  8,16   0        2     0.005640709     0  C  WS 1189888 + 1024 [0]
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

If we enable trace events to trace block actions, We use
blk_fill_rwbs_rq to analyze the corresponding actions
in request's cmd_flags, but we only choose the minor 2 bits
from it, so most of other flags(e.g, REQ_SYNC) are missing.
For example, with a sync write we get:
write_test-2409  [001]   160.013869: block_rq_insert: 3,64 W 0 () 258135 + =
8 [write_test]

Since now we have integrated the flags of both bio and request,
it is safe to pass rq->cmd_flags directly to blk_fill_rwbs and
blk_fill_rwbs_rq isn't needed any more.

With this patch, after a sync write we get:
write_test-2417  [000]   226.603878: block_rq_insert: 3,64 WS 0 () 258135 +=
 8 [write_test]
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Acked-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Now if we enable blktrace, cfq has too many messages output to the
trace buffer. It is fine if we don't specify any action mask.
But if I do like this:
blktrace /dev/sdb -a issue -a complete -o - | blkparse -i -
I only want to see 'D' and 'C', while with the following command
dd if=/mnt/ocfs2/test of=/dev/null bs=4k count=1 iflag=direct

I will get(with a 2.6.37 vanilla kernel):
  8,16   0        0     0.000000000     0  m   N cfq3805 alloced
  8,16   0        0     0.000004126     0  m   N cfq3805 insert_request
  8,16   0        0     0.000004884     0  m   N cfq3805 add_to_rr
  8,16   0        0     0.000008417     0  m   N cfq workload slice:300
  8,16   0        0     0.000009557     0  m   N cfq3805 set_active wl_prio:0 wl_type:2
  8,16   0        0     0.000010640     0  m   N cfq3805 fifo=          (null)
  8,16   0        0     0.000011193     0  m   N cfq3805 dispatch_insert
  8,16   0        0     0.000012221     0  m   N cfq3805 dispatched a request
  8,16   0        0     0.000012802     0  m   N cfq3805 activate rq, drv=1
  8,16   0        1     0.000013181  3805  D   R 114759 + 8 [dd]
  8,16   0        2     0.000164244     0  C   R 114759 + 8 [0]
  8,16   0        0     0.000167997     0  m   N cfq3805 complete rqnoidle 0
  8,16   0        0     0.000168782     0  m   N cfq3805 set_slice=100
  8,16   0        0     0.000169874     0  m   N cfq3805 arm_idle: 8 group_idle: 0
  8,16   0        0     0.000170189     0  m   N cfq schedule dispatch
  8,16   0        0     0.000397938     0  m   N cfq3805 slice expired t=0
  8,16   0        0     0.000399763     0  m   N cfq3805 sl_used=1 disp=1 charge=1 iops=0 sect=8
  8,16   0        0     0.000400227     0  m   N cfq3805 del_from_rr
  8,16   0        0     0.000400882     0  m   N cfq3805 put_queue

See, there are 19 lines while I only need 2. I don't think it is
appropriate for a user.

So this patch will disable any messages if the BLK_TC_NOTIFY isn't set.
Now the output for the same command will look like:
  8,16   0        1     0.000000000  4908  D   R 114759 + 8 [dd]
  8,16   0        2     0.000146827     0  C   R 114759 + 8 [0]

Yes, it is what I want to see.

Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: NTao Ma <boyu.mt@taobao.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>