[ Upstream commit d7c04b05c9ca14c55309eb139430283a45c4c25f ]

When host is under high stress, it is very possible thread
running netdev_wait_allrefs() returns from msleep(250)
10 seconds late.

This leads to these messages in the syslog :

[...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0

If the device refcount is zero, the wait is over.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 8065a779 ]

When a netdev appears through hot plug then gets enslaved by a failover
master that is already up and running, the slave will be opened
right away after getting enslaved. Today there's a race that userspace
(udev) may fail to rename the slave if the kernel (net_failover)
opens the slave earlier than when the userspace rename happens.
Unlike bond or team, the primary slave of failover can't be renamed by
userspace ahead of time, since the kernel initiated auto-enslavement is
unable to, or rather, is never meant to be synchronized with the rename
request from userspace.

As the failover slave interfaces are not designed to be operated
directly by userspace apps: IP configuration, filter rules with
regard to network traffic passing and etc., should all be done on master
interface. In general, userspace apps only care about the
name of master interface, while slave names are less important as long
as admin users can see reliable names that may carry
other information describing the netdev. For e.g., they can infer that
"ens3nsby" is a standby slave of "ens3", while for a
name like "eth0" they can't tell which master it belongs to.

Historically the name of IFF_UP interface can't be changed because
there might be admin script or management software that is already
relying on such behavior and assumes that the slave name can't be
changed once UP. But failover is special: with the in-kernel
auto-enslavement mechanism, the userspace expectation for device
enumeration and bring-up order is already broken. Previously initramfs
and various userspace config tools were modified to bypass failover
slaves because of auto-enslavement and duplicate MAC address. Similarly,
in case that users care about seeing reliable slave name, the new type
of failover slaves needs to be taken care of specifically in userspace
anyway.

It's less risky to lift up the rename restriction on failover slave
which is already UP. Although it's possible this change may potentially
break userspace component (most likely configuration scripts or
management software) that assumes slave name can't be changed while
UP, it's relatively a limited and controllable set among all userspace
components, which can be fixed specifically to listen for the rename
events on failover slaves. Userspace component interacting with slaves
is expected to be changed to operate on failover master interface
instead, as the failover slave is dynamic in nature which may come and
go at any point.  The goal is to make the role of failover slaves less
relevant, and userspace components should only deal with failover master
in the long run.

Fixes: 30c8bd5a ("net: Introduce generic failover module")
Signed-off-by: NSi-Wei Liu <si-wei.liu@oracle.com>
Reviewed-by: NLiran Alon <liran.alon@oracle.com>
Acked-by: NSridhar Samudrala <sridhar.samudrala@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

mainline inclusion
from mainline-5.1
commit 9a5a90d167b0
category: bugfix
bugzilla: 13575
CVE: NA

-------------------------------------------------

__netif_receive_skb_list_ptype() leaves skb->next poisoned before passing
it to pt_prev->func handler, what may produce (in certain cases, e.g. DSA
setup) crashes like:

[ 88.606777] CPU 0 Unable to handle kernel paging request at virtual address 0000000e, epc == 80687078, ra == 8052cc7c
[ 88.618666] Oops[#1]:
[ 88.621196] CPU: 0 PID: 0 Comm: swapper Not tainted 5.1.0-rc2-dlink-00206-g4192a172-dirty #1473
[ 88.630885] $ 0 : 00000000 10000400 00000002 864d7850
[ 88.636709] $ 4 : 87c0ddf0 864d7800 87c0ddf0 00000000
[ 88.642526] $ 8 : 00000000 49600000 00000001 00000001
[ 88.648342] $12 : 00000000 c288617b dadbee27 25d17c41
[ 88.654159] $16 : 87c0ddf0 85cff080 80790000 fffffffd
[ 88.659975] $20 : 80797b20 ffffffff 00000001 864d7800
[ 88.665793] $24 : 00000000 8011e658
[ 88.671609] $28 : 80790000 87c0dbc0 87cabf00 8052cc7c
[ 88.677427] Hi : 00000003
[ 88.680622] Lo : 7b5b4220
[ 88.683840] epc : 80687078 vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.690532] ra : 8052cc7c dev_hard_start_xmit+0xac/0x188
[ 88.696734] Status: 10000404	IEp
[ 88.700422] Cause : 50000008 (ExcCode 02)
[ 88.704874] BadVA : 0000000e
[ 88.708069] PrId : 0001a120 (MIPS interAptiv (multi))
[ 88.713005] Modules linked in:
[ 88.716407] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=00000000)
[ 88.725219] Stack : 85f61c28 00000000 0000000e 80780000 87c0ddf0 85cff080 80790000 8052cc7c
[ 88.734529] 87cabf00 00000000 00000001 85f5fb40 807b0000 864d7850 87cabf00 807d0000
[ 88.743839] 864d7800 8655f600 00000000 85cff080 87c1c000 0000006a 00000000 8052d96c
[ 88.753149] 807a0000 8057adb8 87c0dcc8 87c0dc50 85cfff08 00000558 87cabf00 85f58c50
[ 88.762460] 00000002 85f58c00 864d7800 80543308 fffffff4 00000001 85f58c00 864d7800
[ 88.771770] ...
[ 88.774483] Call Trace:
[ 88.777199] [<80687078>] vlan_dev_hard_start_xmit+0x1c/0x1a0
[ 88.783504] [<8052cc7c>] dev_hard_start_xmit+0xac/0x188
[ 88.789326] [<8052d96c>] __dev_queue_xmit+0x6e8/0x7d4
[ 88.794955] [<805a8640>] ip_finish_output2+0x238/0x4d0
[ 88.800677] [<805ab6a0>] ip_output+0xc8/0x140
[ 88.805526] [<805a68f4>] ip_forward+0x364/0x560
[ 88.810567] [<805a4ff8>] ip_rcv+0x48/0xe4
[ 88.815030] [<80528d44>] __netif_receive_skb_one_core+0x44/0x58
[ 88.821635] [<8067f220>] dsa_switch_rcv+0x108/0x1ac
[ 88.827067] [<80528f80>] __netif_receive_skb_list_core+0x228/0x26c
[ 88.833951] [<8052ed84>] netif_receive_skb_list+0x1d4/0x394
[ 88.840160] [<80355a88>] lunar_rx_poll+0x38c/0x828
[ 88.845496] [<8052fa78>] net_rx_action+0x14c/0x3cc
[ 88.850835] [<806ad300>] __do_softirq+0x178/0x338
[ 88.856077] [<8012a2d4>] irq_exit+0xbc/0x100
[ 88.860846] [<802f8b70>] plat_irq_dispatch+0xc0/0x144
[ 88.866477] [<80105974>] handle_int+0x14c/0x158
[ 88.871516] [<806acfb0>] r4k_wait+0x30/0x40
[ 88.876462] Code: afb10014 8c8200a0 00803025 <9443000c> 94a20468 00000000 10620042 00a08025 9605046a
[ 88.887332]
[ 88.888982] ---[ end trace eb863d007da11cf1 ]---
[ 88.894122] Kernel panic - not syncing: Fatal exception in interrupt
[ 88.901202] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fix this by pulling skb off the sublist and zeroing skb->next pointer
before calling ptype callback.

Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup")
Reviewed-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NAlexander Lobakin <alobakin@dlink.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NZhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: NWenan Mao <maowenan@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 3b89ea9c5902acccdbbdec307c85edd1bf52515e ]

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: NHauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NSasha Levin <sashal@kernel.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 35edfdc77f683c8fd27d7732af06cf6489af60a5 ]

Assign a default net namespace to netdevs created by init_dummy_netdev().
Fixes a NULL pointer dereference caused by busy-polling a socket bound to
an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat
if napi_poll() received packets:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
  IP: napi_busy_loop+0xd6/0x200
  Call Trace:
    sock_poll+0x5e/0x80
    do_sys_poll+0x324/0x5a0
    SyS_poll+0x6c/0xf0
    do_syscall_64+0x6b/0x1f0
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket")
Signed-off-by: NJosh Elsasser <jelsasser@appneta.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

[ Upstream commit 867d0ad476db89a1e8af3f297af402399a54eea5 ]

Commit 04157469 ("net: Use static_key for XPS maps") introduced a
static key for XPS, but the increments/decrements don't match.

First, the static key's counter is incremented once for each queue, but
only decremented once for a whole batch of queues, leading to large
unbalances.

Second, the xps_rxqs_needed key is decremented whenever we reset a batch
of queues, whether they had any rxqs mapping or not, so that if we setup
cpu-XPS on em1 and RXQS-XPS on em2, resetting the queues on em1 would
decrement the xps_rxqs_needed key.

This reworks the accounting scheme so that the xps_needed key is
incremented only once for each type of XPS for all the queues on a
device, and the xps_rxqs_needed key is incremented only once for all
queues. This is sufficient to let us retrieve queues via
get_xps_queue().

This patch introduces a new reset_xps_maps(), which reinitializes and
frees the appropriate map (xps_rxqs_map or xps_cpus_map), and drops a
reference to the needed keys:
 - both xps_needed and xps_rxqs_needed, in case of rxqs maps,
 - only xps_needed, in case of CPU maps.

Now, we also need to call reset_xps_maps() at the end of
__netif_set_xps_queue() when there's no active map left, for example
when writing '00000000,00000000' to all queues' xps_rxqs setting.

Fixes: 04157469 ("net: Use static_key for XPS maps")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f28c020fb488e1a8b87469812017044bef88aa2b ]

Before commit 80d19669 ("net: Refactor XPS for CPUs and Rx queues"),
netif_reset_xps_queues() did netdev_queue_numa_node_write() for all the
queues being reset. Now, this is only done when the "active" variable in
clean_xps_maps() is false, ie when on all the CPUs, there's no active
XPS mapping left.

Fixes: 80d19669 ("net: Refactor XPS for CPUs and Rx queues")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 22f6bbb7 ]

list_del() leaves the skb->next pointer poisoned, which can then lead to
 a crash in e.g. OVS forwarding.  For example, setting up an OVS VXLAN
 forwarding bridge on sfc as per:

========
$ ovs-vsctl show
5dfd9c47-f04b-4aaa-aa96-4fbb0a522a30
    Bridge "br0"
        Port "br0"
            Interface "br0"
                type: internal
        Port "enp6s0f0"
            Interface "enp6s0f0"
        Port "vxlan0"
            Interface "vxlan0"
                type: vxlan
                options: {key="1", local_ip="10.0.0.5", remote_ip="10.0.0.4"}
    ovs_version: "2.5.0"
========
(where 10.0.0.5 is an address on enp6s0f1)
and sending traffic across it will lead to the following panic:
========
general protection fault: 0000 [#1] SMP PTI
CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.20.0-rc3-ehc+ #701
Hardware name: Dell Inc. PowerEdge R710/0M233H, BIOS 6.4.0 07/23/2013
RIP: 0010:dev_hard_start_xmit+0x38/0x200
Code: 53 48 89 fb 48 83 ec 20 48 85 ff 48 89 54 24 08 48 89 4c 24 18 0f 84 ab 01 00 00 48 8d 86 90 00 00 00 48 89 f5 48 89 44 24 10 <4c> 8b 33 48 c7 03 00 00 00 00 48 8b 05 c7 d1 b3 00 4d 85 f6 0f 95
RSP: 0018:ffff888627b437e0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: dead000000000100 RCX: ffff88862279c000
RDX: ffff888614a342c0 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff888618a88000 R08: 0000000000000001 R09: 00000000000003e8
R10: 0000000000000000 R11: ffff888614a34140 R12: 0000000000000000
R13: 0000000000000062 R14: dead000000000100 R15: ffff888616430000
FS:  0000000000000000(0000) GS:ffff888627b40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6d2bc6d000 CR3: 000000000200a000 CR4: 00000000000006e0
Call Trace:
 <IRQ>
 __dev_queue_xmit+0x623/0x870
 ? masked_flow_lookup+0xf7/0x220 [openvswitch]
 ? ep_poll_callback+0x101/0x310
 do_execute_actions+0xaba/0xaf0 [openvswitch]
 ? __wake_up_common+0x8a/0x150
 ? __wake_up_common_lock+0x87/0xc0
 ? queue_userspace_packet+0x31c/0x5b0 [openvswitch]
 ovs_execute_actions+0x47/0x120 [openvswitch]
 ovs_dp_process_packet+0x7d/0x110 [openvswitch]
 ovs_vport_receive+0x6e/0xd0 [openvswitch]
 ? dst_alloc+0x64/0x90
 ? rt_dst_alloc+0x50/0xd0
 ? ip_route_input_slow+0x19a/0x9a0
 ? __udp_enqueue_schedule_skb+0x198/0x1b0
 ? __udp4_lib_rcv+0x856/0xa30
 ? __udp4_lib_rcv+0x856/0xa30
 ? cpumask_next_and+0x19/0x20
 ? find_busiest_group+0x12d/0xcd0
 netdev_frame_hook+0xce/0x150 [openvswitch]
 __netif_receive_skb_core+0x205/0xae0
 __netif_receive_skb_list_core+0x11e/0x220
 netif_receive_skb_list+0x203/0x460
 ? __efx_rx_packet+0x335/0x5e0 [sfc]
 efx_poll+0x182/0x320 [sfc]
 net_rx_action+0x294/0x3c0
 __do_softirq+0xca/0x297
 irq_exit+0xa6/0xb0
 do_IRQ+0x54/0xd0
 common_interrupt+0xf/0xf
 </IRQ>
========
So, in all listified-receive handling, instead pull skbs off the lists with
 skb_list_del_init().

Fixes: 9af86f93 ("net: core: fix use-after-free in __netif_receive_skb_list_core")
Fixes: 7da517a3 ("net: core: Another step of skb receive list processing")
Fixes: a4ca8b7d ("net: ipv4: fix drop handling in ip_list_rcv() and ip_list_rcv_finish()")
Fixes: d8269e2c ("net: ipv6: listify ipv6_rcv() and ip6_rcv_finish()")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 605108ac ]

Eric noted that with UDP GRO and NAPI timeout, we could keep a single
UDP packet inside the GRO hash forever, if the related NAPI instance
calls napi_gro_complete() at an higher frequency than the NAPI timeout.
Willem noted that even TCP packets could be trapped there, till the
next retransmission.
This patch tries to address the issue, flushing the old packets -
those with a NAPI_GRO_CB age before the current jiffy - before scheduling
the NAPI timeout. The rationale is that such a timeout should be
well below a jiffy and we are not flushing packets eligible for sane GRO.

v1  -> v2:
 - clarified the commit message and comment

RFC -> v1:
 - added 'Fixes tags', cleaned-up the wording.
Reported-by: NEric Dumazet <eric.dumazet@gmail.com>
Fixes: 3b47d303 ("net: gro: add a per device gro flush timer")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ]

eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.

This is indeed the value right after a fresh skb allocation.

However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.

Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.

napi_reuse_skb() was added in commit 96e93eab ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.

Fixes: 96e93eab ("gro: Add internal interfaces for VLAN")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commti ece23711dd956cd5053c9cb03e9fe0668f9c8894 ]

Just like with normal GRO processing, we have to initialize
skb->next to NULL when we unlink overflow packets from the
GRO hash lists.

Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.")
Reported-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: NOleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since commit 5aad1de5 ("ipv4: use separate genid for next hop
exceptions"), exceptions get deprecated separately from cached
routes. In particular, administrative changes don't clear PMTU anymore.

As Stefano described in commit e9fa1495 ("ipv6: Reflect MTU changes
on PMTU of exceptions for MTU-less routes"), the PMTU discovered before
the local MTU change can become stale:
 - if the local MTU is now lower than the PMTU, that PMTU is now
   incorrect
 - if the local MTU was the lowest value in the path, and is increased,
   we might discover a higher PMTU

Similarly to what commit e9fa1495 did for IPv6, update PMTU in those
cases.

If the exception was locked, the discovered PMTU was smaller than the
minimal accepted PMTU. In that case, if the new local MTU is smaller
than the current PMTU, let PMTU discovery figure out if locking of the
exception is still needed.

To do this, we need to know the old link MTU in the NETDEV_CHANGEMTU
notifier. By the time the notifier is called, dev->mtu has been
changed. This patch adds the old MTU as additional information in the
notifier structure, and a new call_netdevice_notifiers_u32() function.

Fixes: 5aad1de5 ("ipv4: use separate genid for next hop exceptions")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The conversion of the hotplug notifiers to a state machine left the
notifier.h includes around in some places. Remove them.
Signed-off-by: NMukesh Ojha <mojha@codeaurora.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1535114033-4605-1-git-send-email-mojha@codeaurora.org

The definition of static_key_slow_inc() has cpus_read_lock in place. In the
virtio_net driver, XPS queues are initialized after setting the queue:cpu
affinity in virtnet_set_affinity() which is already protected within
cpus_read_lock. Lockdep prints a warning when we are trying to acquire
cpus_read_lock when it is already held.

This patch adds an ability to call __netif_set_xps_queue under
cpus_read_lock().
Acked-by: NJason Wang <jasowang@redhat.com>

============================================
WARNING: possible recursive locking detected
4.18.0-rc3-next-20180703+ #1 Not tainted
--------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: static_key_slow_inc+0xe/0x20

but task is already holding lock:
00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(cpu_hotplug_lock.rw_sem);
  lock(cpu_hotplug_lock.rw_sem);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by swapper/0/1:
 #0: 00000000244bc7da (&dev->mutex){....}, at: __driver_attach+0x5a/0x110
 #1: 00000000cf973d46 (cpu_hotplug_lock.rw_sem){++++}, at: init_vqs+0x513/0x5a0
 #2: 000000005cd8463f (xps_map_mutex){+.+.}, at: __netif_set_xps_queue+0x8d/0xc60

v2: move cpus_read_lock() out of __netif_set_xps_queue()

Cc: "Nambiar, Amritha" <amritha.nambiar@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Fixes: 8af2c06f ("net-sysfs: Add interface for Rx queue(s) map per Tx queue")
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

dev_set_mtu_ext is able to fail with a valid mtu value, at that
condition, extack._msg is not set and random since it is in stack,
then kernel will crash when print it.

Fixes: 7a4c53be ("net: report invalid mtu value via netlink extack")
Signed-off-by: NZhang Yu <zhangyu31@baidu.com>
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is similar TC_ACT_REDIRECT, but with a slightly different
semantic:
- on ingress the mirred skbs are passed to the target device
network stack without any additional check not scrubbing.
- the rcu-protected stats provided via the tcf_result struct
  are updated on error conditions.

This new tcfa_action value is not exposed to the user-space
and can be used only internally by clsact.

v1 -> v2: do not touch TC_ACT_REDIRECT code path, introduce
 a new action type instead
v2 -> v3:
 - rename the new action value TC_ACT_REINJECT, update the
   helper accordingly
 - take care of uncloned reinjected packets in XDP generic
   hook
v3 -> v4:
 - renamed again the new action value (JiriP)
v4 -> v5:
 - fix build error with !NET_CLS_ACT (kbuild bot)
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If an invalid MTU value is set through rtnetlink return extra error
information instead of putting message in kernel log. For other cases
where there is no visible API, keep the error report in the log.

Example:
	# ip li set dev enp12s0 mtu 10000
	Error: mtu greater than device maximum.

	# ifconfig enp12s0 mtu 10000
	SIOCSIFMTU: Invalid argument
	# dmesg | tail -1
	[ 2047.795467] enp12s0: mtu greater than device maximum
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix dev_change_tx_queue_len so it rolls back original value
upon a failure in dev_qdisc_change_tx_queue_len.
This is already done for notifirers' failures, share the code.

In case of failure in dev_qdisc_change_tx_queue_len, some tx queues
would still be of the new length, while they should be reverted.
Currently, the revert is not done, and is marked with a TODO label
in dev_qdisc_change_tx_queue_len, and should find some nice solution
to do it.
Yet it is still better to not apply the newly requested value.

Fixes: 48bfd55e ("net_sched: plug in qdisc ops change_tx_queue_len")
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reviewed-by: NEran Ben Elisha <eranbe@mellanox.com>
Reported-by: NRan Rozenstein <ranro@mellanox.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based upon a patch by Sean Tranchetti.

Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FIELD_SIZEOF() is in bytes, but we want bits.

Fixes: d9f37d01 ("net: convert gro_count to bitmask")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gro_hash size is 192 bytes, and uses 3 cache lines, if there is few
flows, gro_hash may be not fully used, so it is unnecessary to iterate
all gro_hash in napi_gro_flush(), to occupy unnecessary cacheline.

convert gro_count to a bitmask, and rename it as gro_bitmask, each bit
represents a element of gro_hash, only flush a gro_hash element if the
related bit is set, to speed up napi_gro_flush().

and update gro_bitmask only if it will be changed, to reduce cache
update
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Split the query of HW-attached program from the software one.
Introduce new .ndo_bpf command to query HW-attached program.
This will allow drivers to install different programs in HW
and SW at the same time.  Netlink can now also carry multiple
programs on dump (in which case mode will be set to
XDP_ATTACHED_MULTI and user has to check per-attachment point
attributes, IFLA_XDP_PROG_ID will not be present).  We reuse
IFLA_XDP_PROG_ID skb space for second mode, so rtnl_xdp_size()
doesn't need to be updated.

Note that the installation side is still not there, since all
drivers currently reject installing more than one program at
the time.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

prog_attached of struct netdev_bpf should have been superseded
by simply setting prog_id long time ago, but we kept it around
to allow offloading drivers to communicate attachment mode (drv
vs hw).  Subsequently drivers were also allowed to report back
attachment flags (prog_flags), and since nowadays only programs
attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell
the attachment mode from the flags driver reports.  Remove
prog_attached member.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NQuentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Following crash occurs in validate_xmit_skb_list() when same skb is
iterated multiple times in the loop and consume_skb() is called.

The root cause is calling list_del_init(&skb->list) and not clearing
skb->next in d4546c25. list_del_init(&skb->list) sets skb->next
to point to skb itself. skb->next needs to be cleared because other
parts of network stack uses another kind of SKB lists.
validate_xmit_skb_list() uses such list.

A similar type of bugfix was reported by Jesper Dangaard Brouer.
https://patchwork.ozlabs.org/patch/942541/

This patch clears skb->next and changes list_del_init() to list_del()
so that list->prev will maintain the list poison.

[  148.185511] ==================================================================
[  148.187865] BUG: KASAN: use-after-free in validate_xmit_skb_list+0x4b/0xa0
[  148.190158] Read of size 8 at addr ffff8801e52eefc0 by task swapper/1/0
[  148.192940]
[  148.193642] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-rc3+ #25
[  148.195423] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180531_142017-buildhw-08.phx2.fedoraproject.org-1.fc28 04/01/2014
[  148.199129] Call Trace:
[  148.200565]  <IRQ>
[  148.201911]  dump_stack+0xc6/0x14c
[  148.203572]  ? dump_stack_print_info.cold.1+0x2f/0x2f
[  148.205083]  ? kmsg_dump_rewind_nolock+0x59/0x59
[  148.206307]  ? validate_xmit_skb+0x2c6/0x560
[  148.207432]  ? debug_show_held_locks+0x30/0x30
[  148.208571]  ? validate_xmit_skb_list+0x4b/0xa0
[  148.211144]  print_address_description+0x6c/0x23c
[  148.212601]  ? validate_xmit_skb_list+0x4b/0xa0
[  148.213782]  kasan_report.cold.6+0x241/0x2fd
[  148.214958]  validate_xmit_skb_list+0x4b/0xa0
[  148.216494]  sch_direct_xmit+0x1b0/0x680
[  148.217601]  ? dev_watchdog+0x4e0/0x4e0
[  148.218675]  ? do_raw_spin_trylock+0x10/0x120
[  148.219818]  ? do_raw_spin_lock+0xe0/0xe0
[  148.221032]  __dev_queue_xmit+0x1167/0x1810
[  148.222155]  ? sched_clock+0x5/0x10
[...]

[  148.474257] Allocated by task 0:
[  148.475363]  kasan_kmalloc+0xbf/0xe0
[  148.476503]  kmem_cache_alloc+0xb4/0x1b0
[  148.477654]  __build_skb+0x91/0x250
[  148.478677]  build_skb+0x67/0x180
[  148.479657]  e1000_clean_rx_irq+0x542/0x8a0
[  148.480757]  e1000_clean+0x652/0xd10
[  148.481772]  net_rx_action+0x4ea/0xc20
[  148.482808]  __do_softirq+0x1f9/0x574
[  148.483831]
[  148.484575] Freed by task 0:
[  148.485504]  __kasan_slab_free+0x12e/0x180
[  148.486589]  kmem_cache_free+0xb4/0x240
[  148.487634]  kfree_skbmem+0xed/0x150
[  148.488648]  consume_skb+0x146/0x250
[  148.489665]  validate_xmit_skb+0x2b7/0x560
[  148.490754]  validate_xmit_skb_list+0x70/0xa0
[  148.491897]  sch_direct_xmit+0x1b0/0x680
[  148.493949]  __dev_queue_xmit+0x1167/0x1810
[  148.495103]  br_dev_queue_push_xmit+0xce/0x250
[  148.496196]  br_forward_finish+0x276/0x280
[  148.497234]  __br_forward+0x44f/0x520
[  148.498260]  br_forward+0x19f/0x1b0
[  148.499264]  br_handle_frame_finish+0x65e/0x980
[  148.500398]  NF_HOOK.constprop.10+0x290/0x2a0
[  148.501522]  br_handle_frame+0x417/0x640
[  148.502582]  __netif_receive_skb_core+0xaac/0x18f0
[  148.503753]  __netif_receive_skb_one_core+0x98/0x120
[  148.504958]  netif_receive_skb_internal+0xe3/0x330
[  148.506154]  napi_gro_complete+0x190/0x2a0
[  148.507243]  dev_gro_receive+0x9f7/0x1100
[  148.508316]  napi_gro_receive+0xcb/0x260
[  148.509387]  e1000_clean_rx_irq+0x2fc/0x8a0
[  148.510501]  e1000_clean+0x652/0xd10
[  148.511523]  net_rx_action+0x4ea/0xc20
[  148.512566]  __do_softirq+0x1f9/0x574
[  148.513598]
[  148.514346] The buggy address belongs to the object at ffff8801e52eefc0
[  148.514346]  which belongs to the cache skbuff_head_cache of size 232
[  148.517047] The buggy address is located 0 bytes inside of
[  148.517047]  232-byte region [ffff8801e52eefc0, ffff8801e52ef0a8)
[  148.519549] The buggy address belongs to the page:
[  148.520726] page:ffffea000794bb00 count:1 mapcount:0 mapping:ffff880106f4dfc0 index:0xffff8801e52ee840 compound_mapcount: 0
[  148.524325] flags: 0x17ffffc0008100(slab|head)
[  148.525481] raw: 0017ffffc0008100 ffff880106b938d0 ffff880106b938d0 ffff880106f4dfc0
[  148.527503] raw: ffff8801e52ee840 0000000000190011 00000001ffffffff 0000000000000000
[  148.529547] page dumped because: kasan: bad access detected

Fixes: d4546c25 ("net: Convert GRO SKB handling to list_head.")
Signed-off-by: NPrashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reported-by: NTyler Hicks <tyhicks@canonical.com>
Tested-by: NTyler Hicks <tyhicks@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netif_receive_skb_core can free the skb, so we have to use the dequeue-
 enqueue model when calling it from __netif_receive_skb_list_core.

Fixes: 88eb1944 ("net: core: propagate SKB lists through packet_type lookup")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In netif_receive_skb_list_internal(), all of skb_defer_rx_timestamp(),
 do_xdp_generic() and enqueue_to_backlog() can lead to kfree(skb).  Thus,
 we cannot wait until after they return to remove the skb from the list;
 instead, we remove it first and, in the pass case, add it to a sublist
 afterwards.
In the case of enqueue_to_backlog() we have already decided not to pass
 when we call the function, so we do not need a sublist.

Fixes: 7da517a3 ("net: core: Another step of skb receive list processing")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For most of these calls we can just pass NULL through to the fallback
function as the sb_dev. The only cases where we cannot are the cases where
we might be dealing with either an upper device or a driver that would
have configured things to support an sb_dev itself.

The only driver that has any significant change in this patch set should be
ixgbe as we can drop the redundant functionality that existed in both the
ndo_select_queue function and the fallback function that was passed through
to us.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch makes it so that instead of passing a void pointer as the
accel_priv we instead pass a net_device pointer as sb_dev. Making this
change allows us to pass the subordinate device through to the fallback
function eventually so that we can keep the actual code in the
ndo_select_queue call as focused on possible on the exception cases.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds a generic version of the ndo_select_queue functions for
either returning 0 or selecting a queue based on the processor ID. This is
generally meant to just reduce the number of functions we have to change
in the future when we have to deal with ndo_select_queue changes.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This change makes it so that we can support the concept of subordinate
device traffic classes to the core networking code. In doing this we can
start pulling out the driver specific bits needed to support selecting a
queue based on an upper device.

The solution at is currently stands is only partially implemented. I have
the start of some XPS bits in here, but I would still need to allow for
configuration of the XPS maps on the queues reserved for the subordinate
devices. For now I am using the reference to the sb_dev XPS map as just a
way to skip the lookup of the lower device XPS map for now as that would
result in the wrong queue being picked.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is meant to provide the basic tools needed to allow us to create
subordinate device traffic classes. The general idea here is to allow
subdividing the queues of a device into queue groups accessible through an
upper device such as a macvlan.

The idea here is to enforce the idea that an upper device has to be a
single queue device, ideally with IFF_NO_QUQUE set. With that being the
case we can pretty much guarantee that the tc_to_txq mappings and XPS maps
for the upper device are unused. As such we could reuse those in order to
support subdividing the lower device and distributing those queues between
the subordinate devices.

In order to distinguish between a regular set of traffic classes and if a
device is carrying subordinate traffic classes I changed num_tc from a u8
to a s16 value and use the negative values to represent the subordinate
pool values. So starting at -1 and running to -32768 we can encode those as
pool values, and the existing values of 0 to 15 can be maintained.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

After commit 07d78363 ("net: Convert NAPI gro list into a small hash
table.")' there is 8 hash buckets, which allows more flows to be held for
merging.  but MAX_GRO_SKBS, the total held skb for merging, is 8 skb still,
limit the hash table performance.

keep MAX_GRO_SKBS as 8 skb, but limit each hash list length to 8 skb, not
the total 8 skb
Signed-off-by: NLi RongQing <lirongqing@baidu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Generally the check should be very cheap, as the sk_buff_head is in cache.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also involved adding a way to run a netfilter hook over a list of packets.
 Rather than attempting to make netfilter know about lists (which would be
 a major project in itself) we just let it call the regular okfn (in this
 case ip_rcv_finish()) for any packets it steals, and have it give us back
 a list of packets it's synchronously accepted (which normally NF_HOOK
 would automatically call okfn() on, but we want to be able to potentially
 pass the list to a listified version of okfn().)
The netfilter hooks themselves are indirect calls that still happen per-
 packet (see nf_hook_entry_hookfn()), but again, changing that can be left
 for future work.

There is potential for out-of-order receives if the netfilter hook ends up
 synchronously stealing packets, as they will be processed before any
 accepts earlier in the list.  However, it was already possible for an
 asynchronous accept to cause out-of-order receives, so presumably this is
 considered OK.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__netif_receive_skb_core() does a depressingly large amount of per-packet
 work that can't easily be listified, because the another_round looping
 makes it nontrivial to slice up into smaller functions.
Fortunately, most of that work disappears in the fast path:
 * Hardware devices generally don't have an rx_handler
 * Unless you're tcpdumping or something, there is usually only one ptype
 * VLAN processing comes before the protocol ptype lookup, so doesn't force
   a pt_prev deliver
 so normally, __netif_receive_skb_core() will run straight through and pass
 back the one ptype found in ptype_base[hash of skb->protocol].
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

First example of a layer splitting the list (rather than merely taking
 individual packets off it).
Involves new list.h function, list_cut_before(), like list_cut_position()
 but cuts on the other side of the given entry.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netif_receive_skb_list_internal() now processes a list and hands it
 on to the next function.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just calls netif_receive_skb() in a loop.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support to pick Tx queue based on the Rx queue(s) map
configuration set by the admin through the sysfs attribute
for each Tx queue. If the user configuration for receive queue(s) map
does not apply, then the Tx queue selection falls back to CPU(s) map
based selection and finally to hashing.
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>