- 24 9月, 2013 8 次提交
-
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 9月, 2013 8 次提交
-
-
由 Nithin Sujir 提交于
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
The spinlock is not needed after conversion of tg3_flags from array to set_bit(). Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
Distinguish between tx, rx and txrx interrupts. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
On the 5717, 5719, 5720 and 5762 devices, in shared link/activity mode, the blink rate must be overridden with all bits set. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
This patch adds support for 57764, 57765, 57787, 57782 and 57786 devices. Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nithin Sujir 提交于
For consistency with other register access functions, add shadow register access function of the type (register/val). Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 9月, 2013 17 次提交
-
-
由 Maciej W. Rozycki 提交于
Revert damage caused by 43d620c8: .../declance.c: In function 'cp_to_buf': .../declance.c:347: warning: assignment from incompatible pointer type .../declance.c:348: warning: assignment from incompatible pointer type .../declance.c: In function 'cp_from_buf': .../declance.c:406: warning: assignment from incompatible pointer type .../declance.c:407: warning: assignment from incompatible pointer type Also add a `const' qualifier where applicable and adjust formatting. Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrice Vilchez 提交于
All supported Micrel PHYs implement the standard "power down" bit 11 of BMCR, so this patch adds support using the generic genphy_{suspend,resume} functions. Signed-off-by: NPatrice Vilchez <patrice.vilchez@atmel.com> [b.brezillon@overkiz.com: adapt to newer kernel and generalize to other phys] Signed-off-by: NBoris BREZILLON <b.brezillon@overkiz.com> [nicolas.ferre@atmel.com: commit message modification] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: David J. Choi <david.choi@micrel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
'usbpn_probe' is referenced only in this file. Make it static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NRémi Denis-Courmont <remi@remlab.net> Cc: Rémi Denis-Courmont <remi@remlab.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
Local symbols used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sachin Kamat 提交于
Local symbols used only in this file are made static. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
No function changes (s/\ \t/\t/g) Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Simek 提交于
devm_iounmap is called automatically. Signed-off-by: NMichal Simek <michal.simek@xilinx.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Extend efx_filter_rfs() to map TCP/IPv6 and UDP/IPv6 flows into efx_filter_spec. These are only supported on EF10; on Falcon and Siena they will be rejected by efx_farch_filter_from_gen_spec(). Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Jon Cooper 提交于
Sufficiently small linear packets can be copied into the PIO buffer with a single call to memcpy_toio(). Non-linear packets require an intermediate cache-line-sized buffer. [bwh: I wrote the first version of this, but Jon did the hard work to handle non-linear packets.] Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Try to allocate a segment of PIO buffer to each TX channel. If allocation fails, log an error but continue. PIO buffers must be mapped separately from the NIC registers, with write-combining enabled. Where the host page size is 4K, we could potentially map each VI's registers and PIO buffer separately. However, this would add significant complexity, and we also need to support architectures such as POWER which have a greater page size. So make a single contiguous write-combining mapping after the uncacheable mapping, aligned to the host page size, and link PIO buffers there. Where necessary, allocate additional VIs within the write-combining mapping purely for access to PIO buffers. Link all TX buffers to TX queues and the additional VIs in efx_ef10_dimension_resources() and in efx_ef10_init_nic() after an MC reboot. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Segmentation remains in the driver, but we generate option descriptors describing the required packet editing rather than making our own copies. Reduce tso_state::ipv4_id to 16 bits, so it doesn't overflow into the TCP_FLAGS field of the option descriptor. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Ben Hutchings 提交于
There are very few readable registers, but we may as well report them. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Fengguang Wu 提交于
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
由 Fengguang Wu 提交于
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
-
- 20 9月, 2013 4 次提交
-
-
由 Nikolay Aleksandrov 提交于
This bug was introduced by commit 7a163bfb ("netconsole: avoid a crash with multiple sysfs writers"). In store_enabled() we have the following sequence: acquire nt->mutex then rtnl, but in the netconsole netdev notifier we have rtnl then nt->mutex effectively leading to a deadlock. The NULL pointer dereference that the above commit tries to fix is actually due to another bug in netpoll_cleanup(). This is fixed by dropping the mutex from the netdev notifier as it's already protected by rtnl. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikulas Patocka 提交于
The patch 136d8f37 broke the skge driver. Note this part of the patch: + if (skge_rx_setup(skge, e, nskb, skge->rx_buf_size) < 0) { + dev_kfree_skb(nskb); + goto resubmit; + } + pci_unmap_single(skge->hw->pdev, dma_unmap_addr(e, mapaddr), dma_unmap_len(e, maplen), PCI_DMA_FROMDEVICE); skb = e->skb; prefetch(skb->data); - skge_rx_setup(skge, e, nskb, skge->rx_buf_size); The function skge_rx_setup modifies e->skb to point to the new skb. Thus, after this change, the new buffer, not the old, is returned to the networking stack. This bug is present in kernels 3.11, 3.11.1 and 3.12-rc1. The patch should be queued for 3.11-stable. Signed-off-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: NMikulas Patocka <mpatocka@redhat.com> Reported-by: NVasiliy Glazov <vascom2@gmail.com> Tested-by: NMikulas Patocka <mpatocka@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ansis Atteka 提交于
If local fragmentation is allowed, then ip_select_ident() and ip_select_ident_more() need to generate unique IDs to ensure correct defragmentation on the peer. For example, if IPsec (tunnel mode) has to encrypt large skbs that have local_df bit set, then all IP fragments that belonged to different ESP datagrams would have used the same identificator. If one of these IP fragments would get lost or reordered, then peer could possibly stitch together wrong IP fragments that did not belong to the same datagram. This would lead to a packet loss or data corruption. Signed-off-by: NAnsis Atteka <aatteka@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Durrant 提交于
Without this patch, if a frontend cycles through states Closing and Closed (which Windows frontends need to do) then the netdev will be destroyed and requires re-invocation of hotplug scripts to restore state before the frontend can move to Connected. Thus when udev is not in use the backend gets stuck in InitWait. With this patch, the netdev is left alone whilst the backend is still online and is only de-registered and freed just prior to destroying the vif (which is also nicely symmetrical with the netdev allocation and registration being done during probe) so no re-invocation of hotplug scripts is required. Signed-off-by: NPaul Durrant <paul.durrant@citrix.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Acked-by: NWei Liu <wei.liu2@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2013 2 次提交
-
-
由 Michael Chan 提交于
commit 104a43ed cnic: Use CHIP_NUM macros from bnx2x.h changed the code to use the bnx2x macro NO_FCOE() to determine if FCoE is supported or not. There is another place in cnic that is still using the old method to determine if FCoE is supported or not. The 2 methods may not yield the same result after the network interface is brought down and up. This will cause the crash as cnic_bnx2x_service_kcq() will access the uninitialized cp->kcq2. The fix is to consistently use the same macro CNIC_SUPPORTS_FCOE() which uses the bnx2x NO_FCOE() macro. As a follow-up, we can clean up the code to remove the old method as it is no longer needed. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
commit b9871bcf bnx2x: VF RSS support - PF side changed the configuration of the doorbell HW and it broke iSCSI and FCoE. We fix this by making compatible changes to the doorbell address in bnx2i and bnx2fc. For the userspace driver, we need to pass a modified CID so that the existing userspace driver will calculate the correct doorbell address and continue to work. Signed-off-by: NAriel Elior <ariele@broadcom.com> Signed-off-by: NEddie Wai <eddie.wai@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 9月, 2013 1 次提交
-
-
由 Sridhar Samudrala 提交于
Commit afbd8bae vxlan: add implicit fdb entry for default destination creates an implicit fdb entry for default destination. This results in an invalid fdb entry if default destination is not specified. For ex: ip link add vxlan1 type vxlan id 100 creates the following fdb entry 00:00:00:00:00:00 dev vxlan1 dst 0.0.0.0 self permanent This patch fixes this issue by creating an fdb entry only if a valid default destination is specified. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-