Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 14 2月, 2017 1 次提交
  3. 15 12月, 2016 1 次提交
  5. 13 12月, 2016 1 次提交
    • P
      printk/btrfs: handle more message headers · 262c5e86
      由 Petr Mladek 提交于 
      Commit 4bcc595c ("printk: reinstate KERN_CONT for printing
continuation lines") allows to define more message headers for a single
message.  The motivation is that continuous lines might get mixed.
Therefore it make sense to define the right log level for every piece of
a cont line.

The current btrfs_printk() macros do not support continuous lines at the
moment.  But better be prepared for a custom messages and avoid
potential "lvl" buffer overflow.

This patch iterates over the entire message header.  It is interested
only into the message level like the original code.

This patch also introduces PRINTK_MAX_SINGLE_HEADER_LEN.  Three bytes
are enough for the message level header at the moment.  But it used to
be three, see the commit 04d2c8c8 ("printk: convert the format for
KERN_<LEVEL> to a 2 byte pattern").

Also I fixed the default ratelimit level.  It looked very strange when it
was different from the default log level.

[pmladek@suse.com: Fix a check of the valid message level]
  Link: http://lkml.kernel.org/r/20161111183236.GD2145@dhcp128.suse.cz
Link: http://lkml.kernel.org/r/1478695291-12169-4-git-send-email-pmladek@suse.comSigned-off-by: NPetr Mladek <pmladek@suse.com>
Acked-by: NDavid Sterba <dsterba@suse.com>
Cc: Joe Perches <joe@perches.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      262c5e86
  7. 06 12月, 2016 5 次提交
  9. 30 11月, 2016 1 次提交
  11. 27 9月, 2016 3 次提交
  13. 26 9月, 2016 1 次提交
    • J
      Btrfs: add a flags field to btrfs_fs_info · afcdd129
      由 Josef Bacik 提交于 
      We have a lot of random ints in btrfs_fs_info that can be put into flags.  This
is mostly equivalent with the exception of how we deal with quota going on or
off, now instead we set a flag when we are turning it on or off and deal with
that appropriately, rather than just having a pending state that the current
quota_enabled gets set to.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      afcdd129
  15. 25 8月, 2016 1 次提交
    • W
      btrfs: fix fsfreeze hang caused by delayed iputs deal · 9e7cc91a
      由 Wang Xiaoguang 提交于 
      When running fstests generic/068, sometimes we got below deadlock:
  xfs_io          D ffff8800331dbb20     0  6697   6693 0x00000080
  ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
  ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
  ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
  Call Trace:
  [<ffffffff816a9045>] schedule+0x35/0x80
  [<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
  [<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
  [<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
  [<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
  [<ffffffff810d32b5>] percpu_down_read+0x35/0x50
  [<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
  [<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
  [<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
  [<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
  [<ffffffff81230a1a>] evict+0xba/0x1a0
  [<ffffffff812316b6>] iput+0x196/0x200
  [<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
  [<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
  [<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
  [<ffffffff81218040>] freeze_super+0xf0/0x190
  [<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
  [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
  [<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
  [<ffffffff81229409>] SyS_ioctl+0x79/0x90
  [<ffffffff81003c12>] do_syscall_64+0x62/0x110
  [<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25

>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.

The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:

         CPU1                                  |         CPU2
|-> freeze_super()                             |
    |-> sync_filesystem(sb);                   |
    |                                          |-> cleaner_kthread()
    |                                          |   |-> btrfs_delete_unused_bgs()
    |                                          |       |-> btrfs_remove_chunk()
    |                                          |           |-> btrfs_remove_block_group()
    |                                          |               |-> btrfs_add_delayed_iput()
    |                                          |
    |-> sb->s_writers.frozen = SB_FREEZE_FS;   |
    |-> sb_wait_write(sb, SB_FREEZE_FS);       |
    |   acquire SB_FREEZE_FS lock.             |
    |                                          |
    |-> btrfs_freeze()                         |
        |-> btrfs_commit_transaction()         |
            |-> btrfs_run_delayed_iputs()      |
            |   will handle delayed iputs,     |
            |   that means start_transaction() |
            |   will be called, which will try |
            |   to get SB_FREEZE_FS lock.      |

To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: NWang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NChris Mason <clm@fb.com>
      9e7cc91a
  17. 26 7月, 2016 6 次提交
  19. 18 6月, 2016 2 次提交
    • Z
      btrfs: avoid blocking open_ctree from cleaner_kthread · 90c711ab
      由 Zygo Blaxell 提交于 
      This fixes a problem introduced in commit 2f3165ec
"btrfs: don't force mounts to wait for cleaner_kthread to delete one or more subvolumes".

open_ctree eventually calls btrfs_replay_log which in turn calls
btrfs_commit_super which tries to lock the cleaner_mutex, causing a
recursive mutex deadlock during mount.

Instead of playing whack-a-mole trying to keep up with all the
functions that may want to lock cleaner_mutex, put all the cleaner_mutex
lockers back where they were, and attack the problem more directly:
keep cleaner_kthread asleep until the filesystem is mounted.

When filesystems are mounted read-only and later remounted read-write,
open_ctree did not set fs_info->open and neither does anything else.
Set this flag in btrfs_remount so that neither btrfs_delete_unused_bgs
nor cleaner_kthread get confused by the common case of "/" filesystem
read-only mount followed by read-write remount.
Signed-off-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      90c711ab
    • J
      btrfs: account for non-CoW'd blocks in btrfs_abort_transaction · 64c12921
      由 Jeff Mahoney 提交于 
      The test for !trans->blocks_used in btrfs_abort_transaction is
insufficient to determine whether it's safe to drop the transaction
handle on the floor.  btrfs_cow_block, informed by should_cow_block,
can return blocks that have already been CoW'd in the current
transaction.  trans->blocks_used is only incremented for new block
allocations. If an operation overlaps the blocks in the current
transaction entirely and must abort the transaction, we'll happily
let it clean up the trans handle even though it may have modified
the blocks and will commit an incomplete operation.

In the long-term, I'd like to do closer tracking of when the fs
is actually modified so we can still recover as gracefully as possible,
but that approach will need some discussion.  In the short term,
since this is the only code using trans->blocks_used, let's just
switch it to a bool indicating whether any blocks were used and set
it when should_cow_block returns false.

Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      64c12921
  21. 06 6月, 2016 2 次提交
  23. 03 6月, 2016 1 次提交
  25. 26 5月, 2016 1 次提交
  27. 13 5月, 2016 1 次提交
  29. 06 5月, 2016 2 次提交
  31. 28 4月, 2016 3 次提交
  33. 12 3月, 2016 1 次提交
  35. 23 2月, 2016 2 次提交
  37. 12 2月, 2016 3 次提交
  39. 30 1月, 2016 1 次提交
  41. 22 1月, 2016 1 次提交