staging: iio: tsl2x7x: various comment cleanups

This patch removes several unnecessary comments, changes some comments
so that the use as much of the allowable 80 characters as possible, adds
the proper whitespace, removes some structure members from the kernel
docs that are no longer present, and improves the existing kernel doc
information for some existing structure members.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Signed-off-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/staging/iio/light/tsl2x7x.c

 /*
- * Device driver for monitoring ambient light intensity in (lux)
- * and proximity detection (prox) within the TAOS TSL2X7X family of devices.
+ * Device driver for monitoring ambient light intensity in (lux) and proximity
+ * detection (prox) within the TAOS TSL2X7X family of devices.
  *
  * Copyright (c) 2012, TAOS Corporation.
  * Copyright (c) 2017-2018 Brian Masney <masneyb@onstation.org>
@@ -29,7 +29,7 @@
 #include <linux/iio/sysfs.h>
 #include "tsl2x7x.h"
 
-/* Cal defs*/
+/* Cal defs */
 #define PROX_STAT_CAL			0
 #define PROX_STAT_SAMP			1
 #define MAX_SAMPLES_CAL			200
@@ -42,10 +42,11 @@
 /* Lux calculation constants */
 #define TSL2X7X_LUX_CALC_OVER_FLOW	65535
 
-/* TAOS Register definitions - note:
- * depending on device, some of these register are not used and the
- * register address is benign.
+/*
+ * TAOS Register definitions - Note: depending on device, some of these register
+ * are not used and the register address is benign.
  */
+
 /* 2X7X register offsets */
 #define TSL2X7X_MAX_CONFIG_REG		16
 
@@ -350,15 +351,14 @@ static int tsl2x7x_read_autoinc_regs(struct tsl2X7X_chip *chip, int lower_reg,
  * @indio_dev:	pointer to IIO device
  *
  * The raw ch0 and ch1 values of the ambient light sensed in the last
- * integration cycle are read from the device.
- * Time scale factor array values are adjusted based on the integration time.
- * The raw values are multiplied by a scale factor, and device gain is obtained
- * using gain index. Limit checks are done next, then the ratio of a multiple
- * of ch1 value, to the ch0 value, is calculated. Array tsl2x7x_device_lux[]
- * is then scanned to find the first ratio value that is just above the ratio
- * we just calculated. The ch0 and ch1 multiplier constants in the array are
- * then used along with the time scale factor array values, to calculate the
- * lux.
+ * integration cycle are read from the device. Time scale factor array values
+ * are adjusted based on the integration time. The raw values are multiplied
+ * by a scale factor, and device gain is obtained using gain index. Limit
+ * checks are done next, then the ratio of a multiple of ch1 value, to the
+ * ch0 value, is calculated. Array tsl2x7x_device_lux[] is then scanned to
+ * find the first ratio value that is just above the ratio we just calculated.
+ * The ch0 and ch1 multiplier constants in the array are then used along with
+ * the time scale factor array values, to calculate the lux.
  */
 static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
 {
@@ -371,7 +371,6 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
 	mutex_lock(&chip->als_mutex);
 
 	if (chip->tsl2x7x_chip_status != TSL2X7X_CHIP_WORKING) {
-		/* device is not enabled */
 		dev_err(&chip->client->dev, "%s: device is not enabled\n",
 			__func__);
 		ret = -EBUSY;
@@ -382,7 +381,6 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
 	if (ret < 0)
 		goto out_unlock;
 
-	/* is data new & valid */
 	if (!(ret & TSL2X7X_STA_ADC_VALID)) {
 		dev_err(&chip->client->dev,
 			"%s: data not valid yet\n", __func__);
@@ -438,12 +436,12 @@ static int tsl2x7x_get_lux(struct iio_dev *indio_dev)
 		lux = (lux + (chip->als_time_scale >> 1)) /
 			chip->als_time_scale;
 
-	/* adjust for active gain scale
-	 * The tsl2x7x_device_lux tables have a factor of 256 built-in.
-	 * User-specified gain provides a multiplier.
+	/*
+	 * adjust for active gain scale. The tsl2x7x_device_lux tables have a
+	 * factor of 256 built-in. User-specified gain provides a multiplier.
 	 * Apply user-specified gain before shifting right to retain precision.
-	 * Use 64 bits to avoid overflow on multiplication.
-	 * Then go back to 32 bits before division to avoid using div_u64().
+	 * Use 64 bits to avoid overflow on multiplication. Then go back to
+	 * 32 bits before division to avoid using div_u64().
 	 */
 
 	lux64 = lux;
@@ -721,14 +719,13 @@ static int tsl2x7x_chip_off(struct iio_dev *indio_dev)
 }
 
 /**
- * tsl2x7x_invoke_change
+ * tsl2x7x_invoke_change - power cycle the device to implement the user
+ *                         parameters
  * @indio_dev:	pointer to IIO device
  *
- * Obtain and lock both ALS and PROX resources,
- * determine and save device state (On/Off),
- * cycle device to implement updated parameter,
- * put device back into proper state, and unlock
- * resource.
+ * Obtain and lock both ALS and PROX resources, determine and save device state
+ * (On/Off), cycle device to implement updated parameter, put device back into
+ * proper state, and unlock resource.
  */
 static int tsl2x7x_invoke_change(struct iio_dev *indio_dev)
 {
@@ -904,7 +901,8 @@ static ssize_t in_illuminance0_lux_table_store(struct device *dev,
 
 	get_options(buf, ARRAY_SIZE(value), value);
 
-	/* We now have an array of ints starting at value[1], and
+	/*
+	 * We now have an array of ints starting at value[1], and
 	 * enumerated by value[0].
 	 * We expect each group of three ints is one table entry,
 	 * and the last table entry is all 0.
@@ -1654,9 +1652,7 @@ static int tsl2x7x_probe(struct i2c_client *clientp,
 		}
 	}
 
-	/* Load up the defaults */
 	tsl2x7x_defaults(chip);
-	/* Make sure the chip is on */
 	tsl2x7x_chip_on(indio_dev);
 
 	ret = iio_device_register(indio_dev);
@@ -1730,7 +1726,6 @@ static const struct dev_pm_ops tsl2x7x_pm_ops = {
 	.resume  = tsl2x7x_resume,
 };
 
-/* Driver definition */
 static struct i2c_driver tsl2x7x_driver = {
 	.driver = {
 		.name = "tsl2x7x",

drivers/staging/iio/light/tsl2x7x.h

@@ -48,32 +48,35 @@ struct tsl2x7x_lux {
 #define TSL2X7X_MAX_TIMER_CNT           0xFF
 
 /**
- * struct tsl2x7x_default_settings - power on defaults unless
- *                                   overridden by platform data.
- *  @als_time:              ALS Integration time - multiple of 50mS
- *  @als_gain:              Index into the ALS gain table.
- *  @als_gain_trim:         default gain trim to account for
- *                          aperture effects.
- *  @wait_time:             Time between PRX and ALS cycles
- *                          in 2.7 periods
- *  @prox_time:             5.2ms prox integration time -
- *                          decrease in 2.7ms periods
- *  @prox_gain:             Proximity gain index
+ * struct tsl2x7x_settings - Settings for the tsl2x7x driver
+ *  @als_time:              Integration time of the ALS channel ADCs in 2.73 ms
+ *                          increments. Total integration time is
+ *                          (256 - als_time) * 2.73.
+ *  @als_gain:              Index into the tsl2x7x_als_gain array.
+ *  @als_gain_trim:         Default gain trim to account for aperture effects.
+ *  @wait_time:             Time between proximity and ALS cycles in 2.73
+ *                          periods.
+ *  @prox_time:             Integration time of the proximity ADC in 2.73 ms
+ *                          increments. Total integration time is
+ *                          (256 - prx_time) * 2.73.
+ *  @prox_gain:             Index into the tsl2x7x_prx_gain array.
  *  @prox_config:           Prox configuration filters.
- *  @als_cal_target:        Known external ALS reading for
- *                          calibration.
- *  @als_persistence:       H/W Filters, Number of 'out of limits'
- *                          ALS readings.
+ *  @als_cal_target:        Known external ALS reading for calibration.
+ *  @als_persistence:       H/W Filters, Number of 'out of limits' ALS readings.
  *  @als_interrupt_en:      Enable/Disable ALS interrupts
  *  @als_thresh_low:        CH0 'low' count to trigger interrupt.
  *  @als_thresh_high:       CH0 'high' count to trigger interrupt.
- *  @prox_persistence:      H/W Filters, Number of 'out of limits'
- *                          proximity readings.
- *  @prox_interrupt_en:     Enable/Disable proximity interrupts
+ *  @prox_persistence:      H/W Filters, Number of 'out of limits' proximity
+ *                          readings.
+ *  @prox_interrupt_en:     Enable/Disable proximity interrupts.
  *  @prox_thres_low:        Low threshold proximity detection.
- *  @prox_thres_high:       High threshold proximity detection
- *  @prox_pulse_count:      Number if proximity emitter pulses
- *  @prox_max_samples_cal:  Used for prox cal.
+ *  @prox_thres_high:       High threshold proximity detection.
+ *  @prox_pulse_count:      Number if proximity emitter pulses.
+ *  @prox_max_samples_cal:  The number of samples that are taken when performing
+ *                          a proximity calibration.
+ *  @prox_diode             Which diode(s) to use for driving the external
+ *                          LED(s) for proximity sensing.
+ *  @prox_power             The amount of power to use for the external LED(s).
  */
 struct tsl2x7x_settings {
 	int als_time;
@@ -100,9 +103,6 @@ struct tsl2x7x_settings {
 
 /**
  * struct tsl2X7X_platform_data - Platform callback, glass and defaults
- * @platform_power:            Suspend/resume platform callback
- * @power_on:                  Power on callback
- * @power_off:                 Power off callback
  * @platform_lux_table:        Device specific glass coefficents
  * @platform_default_settings: Device specific power on defaults
  *