提交 ff645bec 编写于 作者: M Michael Chan 提交者: David S. Miller

[TG3]: Workaround 5752 A0 chip ID

The 5752 A0 chip ID is wrong in hardware. The simplest way to workaround
it is to change it to the correct value in tp->pci_chip_rev_id. This
way, it is easier to check for the ASIC_REV_5752 in the rest of the
driver.
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 8c6bda1a
......@@ -7952,6 +7952,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->pci_chip_rev_id = (misc_ctrl_reg >>
MISC_HOST_CTRL_CHIPREV_SHIFT);
/* Wrong chip ID in 5752 A0. This code can be removed later
* as A0 is not in production.
*/
if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
/* Initialize misc host control in PCI block. */
tp->misc_host_ctrl |= (misc_ctrl_reg &
MISC_HOST_CTRL_CHIPREV);
......@@ -7967,8 +7973,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->pci_bist = (cacheline_sz_reg >> 24) & 0xff;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5750 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752_A0 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752_A1)
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
tp->tg3_flags2 |= TG3_FLG2_5750_PLUS;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) ||
......
......@@ -125,7 +125,8 @@
#define CHIPREV_ID_5750_A0 0x4000
#define CHIPREV_ID_5750_A1 0x4001
#define CHIPREV_ID_5750_A3 0x4003
#define CHIPREV_ID_5752_A0 0x5000
#define CHIPREV_ID_5752_A0_HW 0x5000
#define CHIPREV_ID_5752_A0 0x6000
#define CHIPREV_ID_5752_A1 0x6001
#define GET_ASIC_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 12)
#define ASIC_REV_5700 0x07
......@@ -134,8 +135,7 @@
#define ASIC_REV_5704 0x02
#define ASIC_REV_5705 0x03
#define ASIC_REV_5750 0x04
#define ASIC_REV_5752_A0 0x05
#define ASIC_REV_5752_A1 0x06
#define ASIC_REV_5752 0x06
#define GET_CHIP_REV(CHIP_REV_ID) ((CHIP_REV_ID) >> 8)
#define CHIPREV_5700_AX 0x70
#define CHIPREV_5700_BX 0x71
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册