From fef6e26208879f76bada77c11c80d56ebacb32e4 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 6 Jul 2011 10:16:21 -0400 Subject: [PATCH] xen/pci: Shuffle code around. The file is hard to read. Move the code around so that the contents of it follows a uniform format: - setup GSIs - PV, HVM, and initial domain case - then MSI/MSI-x setup - PV, HVM and then initial domain case. - then MSI/MSI-x teardown - same order. - lastly, the __init functions in PV, HVM, and initial domain order. Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/pci/xen.c | 346 ++++++++++++++++++++++----------------------- 1 file changed, 173 insertions(+), 173 deletions(-) diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index f567965c0620..ba4077b73047 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -19,6 +19,43 @@ #include #include +static int xen_pcifront_enable_irq(struct pci_dev *dev) +{ + int rc; + int share = 1; + int pirq; + u8 gsi; + + rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi); + if (rc < 0) { + dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n", + rc); + return rc; + } + + rc = xen_allocate_pirq_gsi(gsi); + if (rc < 0) { + dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n", + gsi, rc); + return rc; + } + pirq = rc; + + if (gsi < NR_IRQS_LEGACY) + share = 0; + + rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront"); + if (rc < 0) { + dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n", + gsi, pirq, rc); + return rc; + } + + dev->irq = rc; + dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq); + return 0; +} + #ifdef CONFIG_ACPI static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, int trigger, int polarity) @@ -58,6 +95,87 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, } #endif +#ifdef CONFIG_XEN_DOM0 +static int xen_register_pirq(u32 gsi, int gsi_override, int triggering) +{ + int rc, pirq, irq = -1; + struct physdev_map_pirq map_irq; + int shareable = 0; + char *name; + + if (!xen_pv_domain()) + return -1; + + if (triggering == ACPI_EDGE_SENSITIVE) { + shareable = 0; + name = "ioapic-edge"; + } else { + shareable = 1; + name = "ioapic-level"; + } + pirq = xen_allocate_pirq_gsi(gsi); + if (pirq < 0) + goto out; + + if (gsi_override >= 0) + irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name); + else + irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); + if (irq < 0) + goto out; + + printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi); + + map_irq.domid = DOMID_SELF; + map_irq.type = MAP_PIRQ_TYPE_GSI; + map_irq.index = gsi; + map_irq.pirq = pirq; + + rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); + if (rc) { + printk(KERN_WARNING "xen map irq failed %d\n", rc); + return -1; + } + +out: + return irq; +} + +static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) +{ + int rc, irq; + struct physdev_setup_gsi setup_gsi; + + if (!xen_pv_domain()) + return -1; + + printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", + gsi, triggering, polarity); + + irq = xen_register_pirq(gsi, gsi_override, triggering); + + setup_gsi.gsi = gsi; + setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); + setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + + rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi); + if (rc == -EEXIST) + printk(KERN_INFO "Already setup the GSI :%d\n", gsi); + else if (rc) { + printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", + gsi, rc); + } + + return irq; +} + +static int acpi_register_gsi_xen(struct device *dev, u32 gsi, + int trigger, int polarity) +{ + return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); +} +#endif + #if defined(CONFIG_PCI_MSI) #include #include @@ -65,6 +183,46 @@ static int acpi_register_gsi_xen_hvm(struct device *dev, u32 gsi, struct xen_pci_frontend_ops *xen_pci_frontend; EXPORT_SYMBOL_GPL(xen_pci_frontend); +/* + * For MSI interrupts we have to use drivers/xen/event.s functions to + * allocate an irq_desc and setup the right */ +static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int irq, ret, i; + struct msi_desc *msidesc; + int *v; + + v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL); + if (!v) + return -ENOMEM; + + if (type == PCI_CAP_ID_MSIX) + ret = xen_pci_frontend_enable_msix(dev, v, nvec); + else + ret = xen_pci_frontend_enable_msi(dev, v); + if (ret) + goto error; + i = 0; + list_for_each_entry(msidesc, &dev->msi_list, list) { + irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, + (type == PCI_CAP_ID_MSIX) ? + "pcifront-msi-x" : + "pcifront-msi", + DOMID_SELF); + if (irq < 0) + goto free; + i++; + } + kfree(v); + return 0; + +error: + dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); +free: + kfree(v); + return ret; +} + #define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \ MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0)) @@ -123,67 +281,6 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return -ENODEV; } -/* - * For MSI interrupts we have to use drivers/xen/event.s functions to - * allocate an irq_desc and setup the right */ - - -static int xen_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - int irq, ret, i; - struct msi_desc *msidesc; - int *v; - - v = kzalloc(sizeof(int) * max(1, nvec), GFP_KERNEL); - if (!v) - return -ENOMEM; - - if (type == PCI_CAP_ID_MSIX) - ret = xen_pci_frontend_enable_msix(dev, v, nvec); - else - ret = xen_pci_frontend_enable_msi(dev, v); - if (ret) - goto error; - i = 0; - list_for_each_entry(msidesc, &dev->msi_list, list) { - irq = xen_bind_pirq_msi_to_irq(dev, msidesc, v[i], 0, - (type == PCI_CAP_ID_MSIX) ? - "pcifront-msi-x" : - "pcifront-msi", - DOMID_SELF); - if (irq < 0) - goto free; - i++; - } - kfree(v); - return 0; - -error: - dev_err(&dev->dev, "Xen PCI frontend has not registered MSI/MSI-X support!\n"); -free: - kfree(v); - return ret; -} - -static void xen_teardown_msi_irqs(struct pci_dev *dev) -{ - struct msi_desc *msidesc; - - msidesc = list_entry(dev->msi_list.next, struct msi_desc, list); - if (msidesc->msi_attrib.is_msix) - xen_pci_frontend_disable_msix(dev); - else - xen_pci_frontend_disable_msi(dev); - - /* Free the IRQ's and the msidesc using the generic code. */ - default_teardown_msi_irqs(dev); -} - -static void xen_teardown_msi_irq(unsigned int irq) -{ - xen_destroy_irq(irq); -} - #ifdef CONFIG_XEN_DOM0 static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { @@ -242,44 +339,28 @@ static int xen_initdom_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return ret; } #endif -#endif -static int xen_pcifront_enable_irq(struct pci_dev *dev) +static void xen_teardown_msi_irqs(struct pci_dev *dev) { - int rc; - int share = 1; - int pirq; - u8 gsi; + struct msi_desc *msidesc; - rc = pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &gsi); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to read interrupt line: %d\n", - rc); - return rc; - } + msidesc = list_entry(dev->msi_list.next, struct msi_desc, list); + if (msidesc->msi_attrib.is_msix) + xen_pci_frontend_disable_msix(dev); + else + xen_pci_frontend_disable_msi(dev); - rc = xen_allocate_pirq_gsi(gsi); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to allocate a PIRQ for GSI%d: %d\n", - gsi, rc); - return rc; - } - pirq = rc; + /* Free the IRQ's and the msidesc using the generic code. */ + default_teardown_msi_irqs(dev); +} - if (gsi < NR_IRQS_LEGACY) - share = 0; +static void xen_teardown_msi_irq(unsigned int irq) +{ + xen_destroy_irq(irq); +} - rc = xen_bind_pirq_gsi_to_irq(gsi, pirq, share, "pcifront"); - if (rc < 0) { - dev_warn(&dev->dev, "Xen PCI: failed to bind GSI%d (PIRQ%d) to IRQ: %d\n", - gsi, pirq, rc); - return rc; - } +#endif - dev->irq = rc; - dev_info(&dev->dev, "Xen PCI mapped GSI%d to IRQ%d\n", gsi, dev->irq); - return 0; -} int __init pci_xen_init(void) { @@ -327,79 +408,6 @@ int __init pci_xen_hvm_init(void) } #ifdef CONFIG_XEN_DOM0 -static int xen_register_pirq(u32 gsi, int gsi_override, int triggering) -{ - int rc, pirq, irq = -1; - struct physdev_map_pirq map_irq; - int shareable = 0; - char *name; - - if (!xen_pv_domain()) - return -1; - - if (triggering == ACPI_EDGE_SENSITIVE) { - shareable = 0; - name = "ioapic-edge"; - } else { - shareable = 1; - name = "ioapic-level"; - } - pirq = xen_allocate_pirq_gsi(gsi); - if (pirq < 0) - goto out; - - if (gsi_override >= 0) - irq = xen_bind_pirq_gsi_to_irq(gsi_override, pirq, shareable, name); - else - irq = xen_bind_pirq_gsi_to_irq(gsi, pirq, shareable, name); - if (irq < 0) - goto out; - - printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", pirq, irq, gsi); - - map_irq.domid = DOMID_SELF; - map_irq.type = MAP_PIRQ_TYPE_GSI; - map_irq.index = gsi; - map_irq.pirq = pirq; - - rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq); - if (rc) { - printk(KERN_WARNING "xen map irq failed %d\n", rc); - return -1; - } - -out: - return irq; -} - -static int xen_register_gsi(u32 gsi, int gsi_override, int triggering, int polarity) -{ - int rc, irq; - struct physdev_setup_gsi setup_gsi; - - if (!xen_pv_domain()) - return -1; - - printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n", - gsi, triggering, polarity); - - irq = xen_register_pirq(gsi, gsi_override, triggering); - - setup_gsi.gsi = gsi; - setup_gsi.triggering = (triggering == ACPI_EDGE_SENSITIVE ? 0 : 1); - setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - - rc = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi); - if (rc == -EEXIST) - printk(KERN_INFO "Already setup the GSI :%d\n", gsi); - else if (rc) { - printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n", - gsi, rc); - } - - return irq; -} - static __init void xen_setup_acpi_sci(void) { int rc; @@ -447,12 +455,6 @@ static __init void xen_setup_acpi_sci(void) return; } -static int acpi_register_gsi_xen(struct device *dev, u32 gsi, - int trigger, int polarity) -{ - return xen_register_gsi(gsi, -1 /* no GSI override */, trigger, polarity); -} - static int __init pci_xen_initial_domain(void) { #ifdef CONFIG_PCI_MSI @@ -493,9 +495,7 @@ void __init xen_setup_pirqs(void) trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE); } } -#endif -#ifdef CONFIG_XEN_DOM0 struct xen_device_domain_owner { domid_t domain; struct pci_dev *dev; -- GitLab