[media] em28xx: checkpatch cleanup: whitespaces/new lines cleanups

This patch is basically produced while testing a tool that
Joe Perches sent upstream sometime ago:
	https://lkml.org/lkml/2014/7/11/794

I used it with those arguments:
	$ reformat_with_checkpatch.sh drivers/media/usb/em28xx/em28xx*.[ch]

It actually produced 24 patches, with is too much, and showed
interesting things: gcc produced different codes on most of the
patches, even with just linespace changes. The total code data
remained the same on all cases I checked though.

Anyway, provided that we fold the resulting patches, this tool
seems useful.
Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/em28xx/em28xx-audio.c

@@ -232,7 +232,6 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = {
 	.channels_max = 2,
 	.buffer_bytes_max = 62720 * 8,	/* just about the value in usbaudio.c */
 
-
 	/*
 	 * The period is 12.288 bytes. Allow a 10% of variation along its
 	 * value, in order to avoid overruns/underruns due to some clock
@@ -655,7 +654,7 @@ static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
 	struct snd_kcontrol *kctl;
 	struct snd_kcontrol_new tmp;
 
-	memset (&tmp, 0, sizeof(tmp));
+	memset(&tmp, 0, sizeof(tmp));
 	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	tmp.private_value = id,
 	tmp.name  = ctl_name,
@@ -672,7 +671,7 @@ static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
 	dprintk("Added control %s for ac97 volume control 0x%04x\n",
 		ctl_name, id);
 
-	memset (&tmp, 0, sizeof(tmp));
+	memset(&tmp, 0, sizeof(tmp));
 	tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
 	tmp.private_value = id,
 	tmp.name  = ctl_name,

drivers/media/usb/em28xx/em28xx-camera.c

@@ -27,7 +27,6 @@
 
 #include "em28xx.h"
 
-
 /* Possible i2c addresses of Micron sensors */
 static unsigned short micron_sensor_addrs[] = {
 	0xb8 >> 1,   /* MT9V111, MT9V403 */
@@ -43,7 +42,6 @@ static unsigned short omnivision_sensor_addrs[] = {
 	I2C_CLIENT_END
 };
 
-
 static struct soc_camera_link camlink = {
 	.bus_id = 0,
 	.flags = 0,
@@ -51,7 +49,6 @@ static struct soc_camera_link camlink = {
 	.unbalanced_power = true,
 };
 
-
 /* FIXME: Should be replaced by a proper mt9m111 driver */
 static int em28xx_initialize_mt9m111(struct em28xx *dev)
 {
@@ -70,7 +67,6 @@ static int em28xx_initialize_mt9m111(struct em28xx *dev)
 	return 0;
 }
 
-
 /* FIXME: Should be replaced by a proper mt9m001 driver */
 static int em28xx_initialize_mt9m001(struct em28xx *dev)
 {
@@ -98,7 +94,6 @@ static int em28xx_initialize_mt9m001(struct em28xx *dev)
 	return 0;
 }
 
-
 /*
  * Probes Micron sensors with 8 bit address and 16 bit register width
  */

drivers/media/usb/em28xx/em28xx-cards.c

@@ -64,7 +64,6 @@ module_param(usb_xfer_mode, int, 0444);
 MODULE_PARM_DESC(usb_xfer_mode,
 		 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
 
-
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
 
@@ -301,7 +300,6 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
 	{	-1,		-1,	-1,		-1},
 };
 
-
 /* Reset for the most [digital] boards */
 static struct em28xx_reg_seq leadership_digital[] = {
 	{EM2874_R80_GPIO_P0_CTRL,	0x70,	0xff,	10},
@@ -562,7 +560,6 @@ static struct em28xx_led pctv_80e_leds[] = {
 	{-1, 0, 0, 0},
 };
 
-
 /*
  *  Board definitions
  */
@@ -2496,6 +2493,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
 	{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
 	{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
 };
+
 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
 
 int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
@@ -3094,6 +3092,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
 			if (le16_to_cpu(dev->udev->descriptor.idVendor)
 								    == 0xeb1a) {
 				__le16 idProd = dev->udev->descriptor.idProduct;
+
 				if (le16_to_cpu(idProd) == 0x2710)
 					chip_name = "em2710";
 				else if (le16_to_cpu(idProd) == 0x2820)
@@ -3420,6 +3419,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
 	/* Checks if audio is provided by a USB Audio Class interface */
 	for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
 		struct usb_interface *uif = udev->config->interface[i];
+
 		if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
 			if (has_vendor_audio)
 				em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n"

drivers/media/usb/em28xx/em28xx-core.c

@@ -222,7 +222,7 @@ int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
 	if (oldval < 0)
 		return oldval;
 
-	newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
+	newval = (((u8)oldval) & ~bitmask) | (val & bitmask);
 
 	return em28xx_write_regs(dev, reg, &newval, 1);
 }
@@ -314,7 +314,7 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
 	if (ret < 0)
 		return ret;
 
-	ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
+	ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *)&value, 2);
 	if (ret < 0)
 		return ret;
 
@@ -614,6 +614,7 @@ const struct em28xx_led *em28xx_find_led(struct em28xx *dev,
 {
 	if (dev->board.leds) {
 		u8 k = 0;
+
 		while (dev->board.leds[k].role >= 0 &&
 		       dev->board.leds[k].role < EM28XX_NUM_LED_ROLES) {
 			if (dev->board.leds[k].role == role)
@@ -658,10 +659,12 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 
 			if (dev->mode == EM28XX_ANALOG_MODE)
 				rc = em28xx_write_reg(dev,
-						    EM28XX_R12_VINENABLE, 0x67);
+						      EM28XX_R12_VINENABLE,
+						      0x67);
 			else
 				rc = em28xx_write_reg(dev,
-						    EM28XX_R12_VINENABLE, 0x37);
+						      EM28XX_R12_VINENABLE,
+						      0x37);
 			if (rc < 0)
 				return rc;
 
@@ -990,7 +993,7 @@ EXPORT_SYMBOL_GPL(em28xx_alloc_urbs);
 int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
 			 int xfer_bulk, int num_bufs, int max_pkt_size,
 		    int packet_multiplier,
-		    int (*urb_data_copy) (struct em28xx *dev, struct urb *urb))
+		    int (*urb_data_copy)(struct em28xx *dev, struct urb *urb))
 {
 	struct em28xx_dmaqueue *dma_q = &dev->vidq;
 	struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;

drivers/media/usb/em28xx/em28xx-dvb.c

@@ -63,7 +63,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION(DRIVER_DESC " - digital TV interface");
 MODULE_VERSION(EM28XX_VERSION);
 
-
 static unsigned int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
@@ -99,7 +98,6 @@ struct em28xx_dvb {
 	struct i2c_client	*i2c_client_tuner;
 };
 
-
 static inline void print_err_status(struct em28xx *dev,
 				    int packet, int status)
 {
@@ -280,7 +278,6 @@ static int em28xx_stop_feed(struct dvb_demux_feed *feed)
 }
 
 
-
 /* ------------------------------------------------------------------ */
 static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
 {
@@ -830,6 +827,7 @@ static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = {
 	.no_tuner = 1,
 	.parallel_ts = 1,
 };
+
 static struct qt1010_config em28xx_qt1010_config = {
 	.i2c_address = 0x62
 };
@@ -861,7 +859,6 @@ static const struct m88ds3103_config pctv_461e_m88ds3103_config = {
 	.agc = 0x99,
 };
 
-
 static struct tda18271_std_map drx_j_std_map = {
 	.atsc_6   = { .if_freq = 5000, .agc_mode = 3, .std = 0, .if_lvl = 1,
 		      .rfagc_top = 0x37, },
@@ -1182,7 +1179,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
 					   &dev->i2c_adap[dev->def_i2c_bus]);
 		if (dvb->fe[0] != NULL) {
 			if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
-				&dev->i2c_adap[dev->def_i2c_bus], 0x61, TUNER_THOMSON_DTT761X)) {
+					&dev->i2c_adap[dev->def_i2c_bus],
+					0x61, TUNER_THOMSON_DTT761X)) {
 				result = -EINVAL;
 				goto out_free;
 			}
@@ -1204,7 +1202,8 @@ static int em28xx_dvb_init(struct em28xx *dev)
 			&dev->i2c_adap[dev->def_i2c_bus], 0x48);
 		if (dvb->fe[0]) {
 			if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
-				&dev->i2c_adap[dev->def_i2c_bus], 0x60, TUNER_PHILIPS_CU1216L)) {
+					&dev->i2c_adap[dev->def_i2c_bus],
+					0x60, TUNER_PHILIPS_CU1216L)) {
 				result = -EINVAL;
 				goto out_free;
 			}
@@ -1266,6 +1265,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
 	case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
 	{
 		struct xc5000_config cfg;
+
 		hauppauge_hvr930c_init(dev);
 
 		dvb->fe[0] = dvb_attach(drxk_attach,

drivers/media/usb/em28xx/em28xx-i2c.c

@@ -593,6 +593,7 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
 	unsigned long l = 0;
 	int len = 0;
 	unsigned char c;
+
 	do {
 		if (len == length) {
 			c = (char)len;

drivers/media/usb/em28xx/em28xx-reg.h

@@ -49,7 +49,6 @@
 #define EM28XX_CHIPCFG2_TS_PACKETSIZE_564	0x02
 #define EM28XX_CHIPCFG2_TS_PACKETSIZE_752	0x03
 
-
 /* GPIO/GPO registers */
 #define EM2880_R04_GPO		0x04    /* em2880-em2883 only */
 #define EM2820_R08_GPIO_CTRL	0x08	/* em2820-em2873/83 only */
@@ -68,7 +67,6 @@
 #define EM28XX_I2C_FREQ_400_KHZ		0x01
 #define EM28XX_I2C_FREQ_100_KHZ		0x00
 
-
 #define EM28XX_R0A_CHIPID	0x0a
 #define EM28XX_R0C_USBSUSP	0x0c
 #define   EM28XX_R0C_USBSUSP_SNAPSHOT	0x20 /* 1=button pressed, needs reset */
@@ -157,7 +155,6 @@
 #define EM28XX_OUTFMT_YUV422_Y1UY0V	0x15
 #define EM28XX_OUTFMT_YUV411		0x18
 
-
 #define EM28XX_R28_XMIN	0x28
 #define EM28XX_R29_XMAX	0x29
 #define EM28XX_R2A_YMIN	0x2a

drivers/media/usb/em28xx/em28xx-v4l.h

@@ -14,7 +14,6 @@
    GNU General Public License for more details.
  */
 
-
 int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count);
 void em28xx_stop_vbi_streaming(struct vb2_queue *vq);
 extern struct vb2_ops em28xx_vbi_qops;

drivers/media/usb/em28xx/em28xx-vbi.c

@@ -92,7 +92,6 @@ vbi_buffer_queue(struct vb2_buffer *vb)
 	spin_unlock_irqrestore(&dev->slock, flags);
 }
 
-
 struct vb2_ops em28xx_vbi_qops = {
 	.queue_setup    = vbi_queue_setup,
 	.buf_prepare    = vbi_buffer_prepare,

drivers/media/usb/em28xx/em28xx-video.c

@@ -81,7 +81,6 @@ MODULE_DESCRIPTION(DRIVER_DESC " - v4l2 interface");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(EM28XX_VERSION);
 
-
 #define EM25XX_FRMDATAHDR_BYTE1			0x02
 #define EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE	0x20
 #define EM25XX_FRMDATAHDR_BYTE2_FRAME_END	0x02
@@ -90,7 +89,6 @@ MODULE_VERSION(EM28XX_VERSION);
 					 EM25XX_FRMDATAHDR_BYTE2_FRAME_END |   \
 					 EM25XX_FRMDATAHDR_BYTE2_FRAME_ID)
 
-
 static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
 static unsigned int vbi_nr[]   = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
 static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
@@ -194,6 +192,7 @@ static int em28xx_vbi_supported(struct em28xx *dev)
 static void em28xx_wake_i2c(struct em28xx *dev)
 {
 	struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
+
 	v4l2_device_call_all(v4l2_dev, 0, core,  reset, 0);
 	v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
 			     INPUT(dev->ctl_input)->vmux, 0, 0);
@@ -831,7 +830,6 @@ static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
 	return 1;
 }
 
-
 static int get_ressource(enum v4l2_buf_type f_type)
 {
 	switch (f_type) {
@@ -1003,6 +1001,7 @@ static void em28xx_stop_streaming(struct vb2_queue *vq)
 	}
 	while (!list_empty(&vidq->active)) {
 		struct em28xx_buffer *buf;
+
 		buf = list_entry(vidq->active.next, struct em28xx_buffer, list);
 		list_del(&buf->list);
 		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
@@ -1033,6 +1032,7 @@ void em28xx_stop_vbi_streaming(struct vb2_queue *vq)
 	}
 	while (!list_empty(&vbiq->active)) {
 		struct em28xx_buffer *buf;
+
 		buf = list_entry(vbiq->active.next, struct em28xx_buffer, list);
 		list_del(&buf->list);
 		vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
@@ -1109,6 +1109,7 @@ static int em28xx_vb2_setup(struct em28xx *dev)
 static void video_mux(struct em28xx *dev, int index)
 {
 	struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
+
 	dev->ctl_input = index;
 	dev->ctl_ainput = INPUT(index)->amux;
 	dev->ctl_aoutput = INPUT(index)->aout;
@@ -1126,7 +1127,8 @@ static void video_mux(struct em28xx *dev, int index)
 		}
 		/* Note: this is msp3400 specific */
 		v4l2_device_call_all(v4l2_dev, 0, audio, s_routing,
-			 dev->ctl_ainput, MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0);
+				     dev->ctl_ainput,
+				     MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0);
 	}
 
 	if (dev->board.adecoder != EM28XX_NOADECODER) {
@@ -1670,6 +1672,7 @@ static int vidioc_g_register(struct file *file, void *priv,
 		reg->val = ret;
 	} else {
 		__le16 val = 0;
+
 		ret = dev->em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
 						   reg->reg, (char *)&val, 2);
 		if (ret < 0)
@@ -1700,7 +1703,6 @@ static int vidioc_s_register(struct file *file, void *priv,
 }
 #endif
 
-
 static int vidioc_querycap(struct file *file, void  *priv,
 			   struct v4l2_capability *cap)
 {
@@ -2177,7 +2179,8 @@ static unsigned short msp3400_addrs[] = {
 
 /******************************** usb interface ******************************/
 
-static struct video_device *em28xx_vdev_init(struct em28xx *dev,
+static struct video_device
+*em28xx_vdev_init(struct em28xx *dev,
 		  const struct video_device *template,
 		  const char *type_name)
 {
@@ -2345,20 +2348,23 @@ static int em28xx_v4l2_init(struct em28xx *dev)
 		if (dev->board.radio.type)
 			v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
 					    &dev->i2c_adap[dev->def_i2c_bus],
-					  "tuner", dev->board.radio_addr, NULL);
+					    "tuner", dev->board.radio_addr,
+					    NULL);
 
 		if (has_demod)
 			v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
-				&dev->i2c_adap[dev->def_i2c_bus], "tuner",
-				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+					    &dev->i2c_adap[dev->def_i2c_bus],
+					    "tuner", 0,
+					    v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
 		if (tuner_addr == 0) {
 			enum v4l2_i2c_tuner_type type =
 				has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
 			struct v4l2_subdev *sd;
 
 			sd = v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
-				&dev->i2c_adap[dev->def_i2c_bus], "tuner",
-				0, v4l2_i2c_tuner_addrs(type));
+						 &dev->i2c_adap[dev->def_i2c_bus],
+						 "tuner", 0,
+						 v4l2_i2c_tuner_addrs(type));
 
 			if (sd)
 				tuner_addr = v4l2_i2c_subdev_addr(sd);

drivers/media/usb/em28xx/em28xx.h

@@ -217,7 +217,6 @@ enum em28xx_mode {
 	EM28XX_DIGITAL_MODE,
 };
 
-
 struct em28xx;
 
 struct em28xx_usb_bufs {
@@ -249,7 +248,7 @@ struct em28xx_usb_ctl {
 	struct em28xx_buffer	*vbi_buf;
 
 		/* copy data from URB */
-	int (*urb_data_copy) (struct em28xx *dev, struct urb *urb);
+	int (*urb_data_copy)(struct em28xx *dev, struct urb *urb);
 
 };
 
@@ -697,14 +696,14 @@ struct em28xx {
 	char urb_buf[URB_MAX_CTRL_SIZE];	/* urb control msg buffer */
 
 	/* helper funcs that call usb_control_msg */
-	int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
+	int (*em28xx_write_regs)(struct em28xx *dev, u16 reg,
 				 char *buf, int len);
-	int (*em28xx_read_reg) (struct em28xx *dev, u16 reg);
-	int (*em28xx_read_reg_req_len) (struct em28xx *dev, u8 req, u16 reg,
+	int (*em28xx_read_reg)(struct em28xx *dev, u16 reg);
+	int (*em28xx_read_reg_req_len)(struct em28xx *dev, u8 req, u16 reg,
 				       char *buf, int len);
-	int (*em28xx_write_regs_req) (struct em28xx *dev, u8 req, u16 reg,
+	int (*em28xx_write_regs_req)(struct em28xx *dev, u8 req, u16 reg,
 				     char *buf, int len);
-	int (*em28xx_read_reg_req) (struct em28xx *dev, u8 req, u16 reg);
+	int (*em28xx_read_reg_req)(struct em28xx *dev, u8 req, u16 reg);
 
 	enum em28xx_mode mode;