i7300_edac: start a driver for i7300 chipset (Clarksboro)

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

drivers/edac/Kconfig

@@ -199,6 +199,13 @@ config EDAC_I5100
 	  Support for error detection and correction the Intel
 	  San Clemente MCH.
 
+config EDAC_I7300
+	tristate "Intel Clarksboro MCH"
+	depends on EDAC_MM_EDAC && X86 && PCI
+	help
+	  Support for error detection and correction the Intel
+	  Clarksboro MCH (Intel 7300 chipset).
+
 config EDAC_MPC85XX
 	tristate "Freescale MPC83xx / MPC85xx"
 	depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || PPC_85xx)

drivers/edac/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_EDAC_CPC925)		+= cpc925_edac.o
 obj-$(CONFIG_EDAC_I5000)		+= i5000_edac.o
 obj-$(CONFIG_EDAC_I5100)		+= i5100_edac.o
 obj-$(CONFIG_EDAC_I5400)		+= i5400_edac.o
+obj-$(CONFIG_EDAC_I7300)		+= i7300_edac.o
 obj-$(CONFIG_EDAC_I7CORE)		+= i7core_edac.o
 obj-$(CONFIG_EDAC_E7XXX)		+= e7xxx_edac.o
 obj-$(CONFIG_EDAC_E752X)		+= e752x_edac.o

drivers/edac/i7300_edac.c

+/*
+ * Intel 7300 class Memory Controllers kernel module (Clarksboro)
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License version 2 only.
+ *
+ * Copyright (c) 2010 by:
+ *	 Mauro Carvalho Chehab <mchehab@redhat.com>
+ *
+ * Red Hat Inc. http://www.redhat.com
+ *
+ * Intel 7300 Chipset Memory Controller Hub (MCH) - Datasheet
+ *	http://www.intel.com/Assets/PDF/datasheet/318082.pdf
+ *
+ * TODO: The chipset allow checking for PCI Express errors also. Currently,
+ *	 the driver covers only memory error errors
+ *
+ * This driver uses "csrows" EDAC attribute to represent DIMM slot#
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/mmzone.h>
+
+#include "edac_core.h"
+
+/*
+ * Alter this version for the I7300 module when modifications are made
+ */
+#define I7300_REVISION    " Ver: 1.0.0 " __DATE__
+
+#define EDAC_MOD_STR      "i7300_edac"
+
+#define i7300_printk(level, fmt, arg...) \
+	edac_printk(level, "i7300", fmt, ##arg)
+
+#define i7300_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "i7300", fmt, ##arg)
+
+/*
+ * Memory topology is organized as:
+ *	Branch 0 - 2 channels: channels 0 and 1 (FDB0 PCI dev 21.0)
+ *	Branch 1 - 2 channels: channels 2 and 3 (FDB1 PCI dev 22.0)
+ * Each channel can have to 8 DIMM sets (called as SLOTS)
+ * Slots should generally be filled in pairs
+ *	Except on Single Channel mode of operation
+ *		just slot 0/channel0 filled on this mode
+ *	On normal operation mode, the two channels on a branch should be
+		filled together for the same SLOT#
+ * When in mirrored mode, Branch 1 replicate memory at Branch 0, so, the four
+ *		channels on both branches should be filled
+ */
+
+/* Limits for i7300 */
+#define MAX_SLOTS		8
+#define MAX_BRANCHES		2
+#define MAX_CH_PER_BRANCH	2
+#define MAX_CHANNELS		(MAX_CH_PER_BRANCH * MAX_BRANCHES)
+#define MAX_MIR			3
+
+#define to_channel(ch, branch)	((((branch)) << 1) | (ch))
+
+#define to_csrow(slot, ch, branch)					\
+		(to_channel(ch, branch) | ((slot) << 2))
+
+
+/* Device 16,
+ * Function 0: System Address (not documented)
+ * Function 1: Memory Branch Map, Control, Errors Register
+ * Function 2: FSB Error Registers
+ *
+ * All 3 functions of Device 16 (0,1,2) share the SAME DID and
+ * uses PCI_DEVICE_ID_INTEL_I7300_MCH_ERR for device 16 (0,1,2),
+ * PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 and PCI_DEVICE_ID_INTEL_I7300_MCH_FB1
+ * for device 21 (0,1).
+ */
+
+	/* OFFSETS for Function 0 */
+#define		AMBASE			0x48 /* AMB Mem Mapped Reg Region Base */
+#define		MAXCH			0x56 /* Max Channel Number */
+#define		MAXDIMMPERCH		0x57 /* Max DIMM PER Channel Number */
+
+	/* OFFSETS for Function 1 */
+#define		TOLM			0x6C
+#define		REDMEMB			0x7C
+
+#define		MIR0			0x80
+#define		MIR1			0x84
+#define		MIR2			0x88
+
+#if 0
+#define		AMIR0			0x8c
+#define		AMIR1			0x90
+#define		AMIR2			0x94
+
+/*TODO: double check it */
+#define			REC_ECC_LOCATOR_ODD(x)	((x) & 0x3fe00) /* bits [17:9] indicate ODD, [8:0]  indicate EVEN */
+
+	/* Fatal error registers */
+#define		FERR_FAT_FBD		0x98
+
+/*TODO: double check it */
+#define			FERR_FAT_FBDCHAN (3<<28)	/* channel index where the highest-order error occurred */
+
+#define		NERR_FAT_FBD		0x9c
+#define		FERR_NF_FBD		0xa0
+
+	/* Non-fatal error register */
+#define		NERR_NF_FBD		0xa4
+
+	/* Enable error mask */
+#define		EMASK_FBD		0xa8
+
+#define		ERR0_FBD		0xac
+#define		ERR1_FBD		0xb0
+#define		ERR2_FBD		0xb4
+#define		MCERR_FBD		0xb8
+
+#endif
+
+/* TODO: Dev 16 fn1 allows memory error injection - offsets 0x100-0x10b */
+
+	/* TODO: OFFSETS for Device 16 Function 2 */
+
+/*
+ * Device 21,
+ * Function 0: Memory Map Branch 0
+ *
+ * Device 22,
+ * Function 0: Memory Map Branch 1
+ */
+
+	/* OFFSETS for Function 0 */
+
+/*
+ * Note: Other Intel EDAC drivers use AMBPRESENT to identify if the available
+ * memory. From datasheet item 7.3.1 (FB-DIMM technology & organization), it
+ * seems that we cannot use this information directly for the same usage.
+ * Each memory slot may have up to 2 AMB interfaces, one for income and another
+ * for outcome interface to the next slot.
+ * For now, the driver just stores the AMB present registers, but rely only at
+ * the MTR info to detect memory.
+ * Datasheet is also not clear about how to map each AMBPRESENT registers to
+ * one of the 4 available channels.
+ */
+#define AMBPRESENT_0	0x64
+#define AMBPRESENT_1	0x66
+
+const static u16 mtr_regs [MAX_SLOTS] = {
+	0x80, 0x84, 0x88, 0x8c,
+	0x82, 0x86, 0x8a, 0x8e
+};
+
+/* Defines to extract the vaious fields from the
+ *	MTRx - Memory Technology Registers
+ */
+#define MTR_DIMMS_PRESENT(mtr)		((mtr) & (1 << 8))
+#define MTR_DIMMS_ETHROTTLE(mtr)	((mtr) & (1 << 7))
+#define MTR_DRAM_WIDTH(mtr)		(((mtr) & (1 << 6)) ? 8 : 4)
+#define MTR_DRAM_BANKS(mtr)		(((mtr) & (1 << 5)) ? 8 : 4)
+#define MTR_DIMM_RANKS(mtr)		(((mtr) & (1 << 4)) ? 1 : 0)
+#define MTR_DIMM_ROWS(mtr)		(((mtr) >> 2) & 0x3)
+#define MTR_DRAM_BANKS_ADDR_BITS	2
+#define MTR_DIMM_ROWS_ADDR_BITS(mtr)	(MTR_DIMM_ROWS(mtr) + 13)
+#define MTR_DIMM_COLS(mtr)		((mtr) & 0x3)
+#define MTR_DIMM_COLS_ADDR_BITS(mtr)	(MTR_DIMM_COLS(mtr) + 10)
+
+#if 0
+	/* OFFSETS for Function 1 */
+
+/* TODO */
+#define NRECFGLOG		0x74
+#define RECFGLOG		0x78
+#define NRECMEMA		0xbe
+#define NRECMEMB		0xc0
+#define NRECFB_DIMMA		0xc4
+#define NRECFB_DIMMB		0xc8
+#define NRECFB_DIMMC		0xcc
+#define NRECFB_DIMMD		0xd0
+#define NRECFB_DIMME		0xd4
+#define NRECFB_DIMMF		0xd8
+#define REDMEMA			0xdC
+#define RECMEMA			0xf0
+#define RECMEMB			0xf4
+#define RECFB_DIMMA		0xf8
+#define RECFB_DIMMB		0xec
+#define RECFB_DIMMC		0xf0
+#define RECFB_DIMMD		0xf4
+#define RECFB_DIMME		0xf8
+#define RECFB_DIMMF		0xfC
+
+/* This applies to FERR_NF_FB-DIMM as well as FERR_FAT_FB-DIMM */
+static inline int extract_fbdchan_indx(u32 x)
+{
+	return (x>>28) & 0x3;
+}
+#endif
+
+#ifdef CONFIG_EDAC_DEBUG
+/* MTR NUMROW */
+static const char *numrow_toString[] = {
+	"8,192 - 13 rows",
+	"16,384 - 14 rows",
+	"32,768 - 15 rows",
+	"65,536 - 16 rows"
+};
+
+/* MTR NUMCOL */
+static const char *numcol_toString[] = {
+	"1,024 - 10 columns",
+	"2,048 - 11 columns",
+	"4,096 - 12 columns",
+	"reserved"
+};
+#endif
+
+#if 0
+
+/*
+ * Error indicator bits and masks
+ * Error masks are according with Table 5-17 of i7300 datasheet
+ */
+
+enum error_mask {
+	EMASK_M1  = 1<<0,  /* Memory Write error on non-redundant retry */
+	EMASK_M2  = 1<<1,  /* Memory or FB-DIMM configuration CRC read error */
+	EMASK_M3  = 1<<2,  /* Reserved */
+	EMASK_M4  = 1<<3,  /* Uncorrectable Data ECC on Replay */
+	EMASK_M5  = 1<<4,  /* Aliased Uncorrectable Non-Mirrored Demand Data ECC */
+	EMASK_M6  = 1<<5,  /* Unsupported on i7300 */
+	EMASK_M7  = 1<<6,  /* Aliased Uncorrectable Resilver- or Spare-Copy Data ECC */
+	EMASK_M8  = 1<<7,  /* Aliased Uncorrectable Patrol Data ECC */
+	EMASK_M9  = 1<<8,  /* Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC */
+	EMASK_M10 = 1<<9,  /* Unsupported on i7300 */
+	EMASK_M11 = 1<<10, /* Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC  */
+	EMASK_M12 = 1<<11, /* Non-Aliased Uncorrectable Patrol Data ECC */
+	EMASK_M13 = 1<<12, /* Memory Write error on first attempt */
+	EMASK_M14 = 1<<13, /* FB-DIMM Configuration Write error on first attempt */
+	EMASK_M15 = 1<<14, /* Memory or FB-DIMM configuration CRC read error */
+	EMASK_M16 = 1<<15, /* Channel Failed-Over Occurred */
+	EMASK_M17 = 1<<16, /* Correctable Non-Mirrored Demand Data ECC */
+	EMASK_M18 = 1<<17, /* Unsupported on i7300 */
+	EMASK_M19 = 1<<18, /* Correctable Resilver- or Spare-Copy Data ECC */
+	EMASK_M20 = 1<<19, /* Correctable Patrol Data ECC */
+	EMASK_M21 = 1<<20, /* FB-DIMM Northbound parity error on FB-DIMM Sync Status */
+	EMASK_M22 = 1<<21, /* SPD protocol Error */
+	EMASK_M23 = 1<<22, /* Non-Redundant Fast Reset Timeout */
+	EMASK_M24 = 1<<23, /* Refresh error */
+	EMASK_M25 = 1<<24, /* Memory Write error on redundant retry */
+	EMASK_M26 = 1<<25, /* Redundant Fast Reset Timeout */
+	EMASK_M27 = 1<<26, /* Correctable Counter Threshold Exceeded */
+	EMASK_M28 = 1<<27, /* DIMM-Spare Copy Completed */
+	EMASK_M29 = 1<<28, /* DIMM-Isolation Completed */
+};
+
+/*
+ * Names to translate bit error into something useful
+ */
+static const char *error_name[] = {
+	[0]  = "Memory Write error on non-redundant retry",
+	[1]  = "Memory or FB-DIMM configuration CRC read error",
+	/* Reserved */
+	[3]  = "Uncorrectable Data ECC on Replay",
+	[4]  = "Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	/* M6 Unsupported on i7300 */
+	[6]  = "Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[7]  = "Aliased Uncorrectable Patrol Data ECC",
+	[8]  = "Non-Aliased Uncorrectable Non-Mirrored Demand Data ECC",
+	/* M10 Unsupported on i7300 */
+	[10] = "Non-Aliased Uncorrectable Resilver- or Spare-Copy Data ECC",
+	[11] = "Non-Aliased Uncorrectable Patrol Data ECC",
+	[12] = "Memory Write error on first attempt",
+	[13] = "FB-DIMM Configuration Write error on first attempt",
+	[14] = "Memory or FB-DIMM configuration CRC read error",
+	[15] = "Channel Failed-Over Occurred",
+	[16] = "Correctable Non-Mirrored Demand Data ECC",
+	/* M18 Unsupported on i7300 */
+	[18] = "Correctable Resilver- or Spare-Copy Data ECC",
+	[19] = "Correctable Patrol Data ECC",
+	[20] = "FB-DIMM Northbound parity error on FB-DIMM Sync Status",
+	[21] = "SPD protocol Error",
+	[22] = "Non-Redundant Fast Reset Timeout",
+	[23] = "Refresh error",
+	[24] = "Memory Write error on redundant retry",
+	[25] = "Redundant Fast Reset Timeout",
+	[26] = "Correctable Counter Threshold Exceeded",
+	[27] = "DIMM-Spare Copy Completed",
+	[28] = "DIMM-Isolation Completed",
+};
+
+/* Fatal errors */
+#define ERROR_FAT_MASK		(EMASK_M1 | \
+				 EMASK_M2 | \
+				 EMASK_M23)
+
+/* Correctable errors */
+#define ERROR_NF_CORRECTABLE	(EMASK_M27 | \
+				 EMASK_M20 | \
+				 EMASK_M19 | \
+				 EMASK_M18 | \
+				 EMASK_M17 | \
+				 EMASK_M16)
+#define ERROR_NF_DIMM_SPARE	(EMASK_M29 | \
+				 EMASK_M28)
+#define ERROR_NF_SPD_PROTOCOL	(EMASK_M22)
+#define ERROR_NF_NORTH_CRC	(EMASK_M21)
+
+/* Recoverable errors */
+#define ERROR_NF_RECOVERABLE	(EMASK_M26 | \
+				 EMASK_M25 | \
+				 EMASK_M24 | \
+				 EMASK_M15 | \
+				 EMASK_M14 | \
+				 EMASK_M13 | \
+				 EMASK_M12 | \
+				 EMASK_M11 | \
+				 EMASK_M9  | \
+				 EMASK_M8  | \
+				 EMASK_M7  | \
+				 EMASK_M5)
+
+/* uncorrectable errors */
+#define ERROR_NF_UNCORRECTABLE	(EMASK_M4)
+
+/* mask to all non-fatal errors */
+#define ERROR_NF_MASK		(ERROR_NF_CORRECTABLE   | \
+				 ERROR_NF_UNCORRECTABLE | \
+				 ERROR_NF_RECOVERABLE   | \
+				 ERROR_NF_DIMM_SPARE    | \
+				 ERROR_NF_SPD_PROTOCOL  | \
+				 ERROR_NF_NORTH_CRC)
+
+/*
+ * Define error masks for the several registers
+ */
+
+/* Enable all fatal and non fatal errors */
+#define ENABLE_EMASK_ALL	(ERROR_FAT_MASK | ERROR_NF_MASK)
+
+/* mask for fatal error registers */
+#define FERR_FAT_MASK ERROR_FAT_MASK
+
+/* masks for non-fatal error register */
+static inline int to_nf_mask(unsigned int mask)
+{
+	return (mask & EMASK_M29) | (mask >> 3);
+};
+
+static inline int from_nf_ferr(unsigned int mask)
+{
+	return (mask & EMASK_M29) |		/* Bit 28 */
+	       (mask & ((1 << 28) - 1) << 3);	/* Bits 0 to 27 */
+};
+
+#define FERR_NF_MASK		to_nf_mask(ERROR_NF_MASK)
+#define FERR_NF_CORRECTABLE	to_nf_mask(ERROR_NF_CORRECTABLE)
+#define FERR_NF_DIMM_SPARE	to_nf_mask(ERROR_NF_DIMM_SPARE)
+#define FERR_NF_SPD_PROTOCOL	to_nf_mask(ERROR_NF_SPD_PROTOCOL)
+#define FERR_NF_NORTH_CRC	to_nf_mask(ERROR_NF_NORTH_CRC)
+#define FERR_NF_RECOVERABLE	to_nf_mask(ERROR_NF_RECOVERABLE)
+#define FERR_NF_UNCORRECTABLE	to_nf_mask(ERROR_NF_UNCORRECTABLE)
+
+#endif
+
+/* Device name and register DID (Device ID) */
+struct i7300_dev_info {
+	const char *ctl_name;	/* name for this device */
+	u16 fsb_mapping_errors;	/* DID for the branchmap,control */
+};
+
+/* Table of devices attributes supported by this driver */
+static const struct i7300_dev_info i7300_devs[] = {
+	{
+		.ctl_name = "I7300",
+		.fsb_mapping_errors = PCI_DEVICE_ID_INTEL_I7300_MCH_ERR,
+	},
+};
+
+struct i7300_dimm_info {
+	int megabytes;		/* size, 0 means not present  */
+};
+
+/* driver private data structure */
+struct i7300_pvt {
+	struct pci_dev *system_address;		/* 16.0 */
+	struct pci_dev *branchmap_werrors;	/* 16.1 */
+	struct pci_dev *fsb_error_regs;		/* 16.2 */
+	struct pci_dev *branch_pci[MAX_BRANCHES];	/* 21.0  and 22.0 */
+
+	u16 tolm;				/* top of low memory */
+	u64 ambase;				/* AMB BAR */
+
+	u16 mir[MAX_MIR];
+
+	u16 mtr[MAX_SLOTS][MAX_BRANCHES];		/* Memory Technlogy Reg */
+	u16 ambpresent[MAX_CHANNELS];		/* AMB present regs */
+
+	/* DIMM information matrix, allocating architecture maximums */
+	struct i7300_dimm_info dimm_info[MAX_SLOTS][MAX_CHANNELS];
+};
+
+#if 0
+/* I7300 MCH error information retrieved from Hardware */
+struct i7300_error_info {
+	/* These registers are always read from the MC */
+	u32 ferr_fat_fbd;	/* First Errors Fatal */
+	u32 nerr_fat_fbd;	/* Next Errors Fatal */
+	u32 ferr_nf_fbd;	/* First Errors Non-Fatal */
+	u32 nerr_nf_fbd;	/* Next Errors Non-Fatal */
+
+	/* These registers are input ONLY if there was a Recoverable Error */
+	u32 redmemb;		/* Recoverable Mem Data Error log B */
+	u16 recmema;		/* Recoverable Mem Error log A */
+	u32 recmemb;		/* Recoverable Mem Error log B */
+
+	/* These registers are input ONLY if there was a Non-Rec Error */
+	u16 nrecmema;		/* Non-Recoverable Mem log A */
+	u16 nrecmemb;		/* Non-Recoverable Mem log B */
+
+};
+#endif
+
+/* FIXME: Why do we need to have this static? */
+static struct edac_pci_ctl_info *i7300_pci;
+
+
+#if 0
+/* note that nrec_rdwr changed from NRECMEMA to NRECMEMB between the 5000 and
+   5400 better to use an inline function than a macro in this case */
+static inline int nrec_bank(struct i7300_error_info *info)
+{
+	return ((info->nrecmema) >> 12) & 0x7;
+}
+static inline int nrec_rank(struct i7300_error_info *info)
+{
+	return ((info->nrecmema) >> 8) & 0xf;
+}
+static inline int nrec_buf_id(struct i7300_error_info *info)
+{
+	return ((info->nrecmema)) & 0xff;
+}
+static inline int nrec_rdwr(struct i7300_error_info *info)
+{
+	return (info->nrecmemb) >> 31;
+}
+/* This applies to both NREC and REC string so it can be used with nrec_rdwr
+   and rec_rdwr */
+static inline const char *rdwr_str(int rdwr)
+{
+	return rdwr ? "Write" : "Read";
+}
+static inline int nrec_cas(struct i7300_error_info *info)
+{
+	return ((info->nrecmemb) >> 16) & 0x1fff;
+}
+static inline int nrec_ras(struct i7300_error_info *info)
+{
+	return (info->nrecmemb) & 0xffff;
+}
+static inline int rec_bank(struct i7300_error_info *info)
+{
+	return ((info->recmema) >> 12) & 0x7;
+}
+static inline int rec_rank(struct i7300_error_info *info)
+{
+	return ((info->recmema) >> 8) & 0xf;
+}
+static inline int rec_rdwr(struct i7300_error_info *info)
+{
+	return (info->recmemb) >> 31;
+}
+static inline int rec_cas(struct i7300_error_info *info)
+{
+	return ((info->recmemb) >> 16) & 0x1fff;
+}
+static inline int rec_ras(struct i7300_error_info *info)
+{
+	return (info->recmemb) & 0xffff;
+}
+
+/*
+ *	i7300_get_error_info	Retrieve the hardware error information from
+ *				the hardware and cache it in the 'info'
+ *				structure
+ */
+static void i7300_get_error_info(struct mem_ctl_info *mci,
+				 struct i7300_error_info *info)
+{
+	struct i7300_pvt *pvt;
+	u32 value;
+
+	pvt = mci->pvt_info;
+
+	/* read in the 1st FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_FAT_FBD, &value);
+
+	/* Mask only the bits that the doc says are valid
+	 */
+	value &= (FERR_FAT_FBDCHAN | FERR_FAT_MASK);
+
+	/* If there is an error, then read in the
+	   NEXT FATAL error register and the Memory Error Log Register A
+	 */
+	if (value & FERR_FAT_MASK) {
+		info->ferr_fat_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_FAT_FBD, &info->nerr_fat_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				NRECMEMA, &info->nrecmema);
+		pci_read_config_word(pvt->branchmap_werrors,
+				NRECMEMB, &info->nrecmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_FAT_FBD, value);
+	} else {
+		info->ferr_fat_fbd = 0;
+		info->nerr_fat_fbd = 0;
+		info->nrecmema = 0;
+		info->nrecmemb = 0;
+	}
+
+	/* read in the 1st NON-FATAL error register */
+	pci_read_config_dword(pvt->branchmap_werrors, FERR_NF_FBD, &value);
+
+	/* If there is an error, then read in the 1st NON-FATAL error
+	 * register as well */
+	if (value & FERR_NF_MASK) {
+		info->ferr_nf_fbd = value;
+
+		/* harvest the various error data we need */
+		pci_read_config_dword(pvt->branchmap_werrors,
+				NERR_NF_FBD, &info->nerr_nf_fbd);
+		pci_read_config_word(pvt->branchmap_werrors,
+				RECMEMA, &info->recmema);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				RECMEMB, &info->recmemb);
+		pci_read_config_dword(pvt->branchmap_werrors,
+				REDMEMB, &info->redmemb);
+
+		/* Clear the error bits, by writing them back */
+		pci_write_config_dword(pvt->branchmap_werrors,
+				FERR_NF_FBD, value);
+	} else {
+		info->ferr_nf_fbd = 0;
+		info->nerr_nf_fbd = 0;
+		info->recmema = 0;
+		info->recmemb = 0;
+		info->redmemb = 0;
+	}
+}
+
+/*
+ * i7300_proccess_non_recoverable_info(struct mem_ctl_info *mci,
+ * 					struct i7300_error_info *info,
+ * 					int handle_errors);
+ *
+ *	handle the Intel FATAL and unrecoverable errors, if any
+ */
+static void i7300_proccess_non_recoverable_info(struct mem_ctl_info *mci,
+				    struct i7300_error_info *info,
+				    unsigned long allErrors)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
+	int branch;
+	int channel;
+	int bank;
+	int buf_id;
+	int rank;
+	int rdwr;
+	int ras, cas;
+	int errnum;
+	char *type = NULL;
+
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	if (allErrors &  ERROR_FAT_MASK)
+		type = "FATAL";
+	else if (allErrors & FERR_NF_UNCORRECTABLE)
+		type = "NON-FATAL uncorrected";
+	else
+		type = "NON-FATAL recoverable";
+
+	/* ONLY ONE of the possible error bits will be set, as per the docs */
+
+	branch = extract_fbdchan_indx(info->ferr_fat_fbd);
+	channel = branch;
+
+	/* Use the NON-Recoverable macros to extract data */
+	bank = nrec_bank(info);
+	rank = nrec_rank(info);
+	buf_id = nrec_buf_id(info);
+	rdwr = nrec_rdwr(info);
+	ras = nrec_ras(info);
+	cas = nrec_cas(info);
+
+	debugf0("\t\tCSROW= %d  Channels= %d,%d  (Branch= %d "
+		"DRAM Bank= %d Buffer ID = %d rdwr= %s ras= %d cas= %d)\n",
+		rank, channel, channel + 1, branch >> 1, bank,
+		buf_id, rdwr_str(rdwr), ras, cas);
+
+	/* Only 1 bit will be on */
+	errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+	/* Form out message */
+	snprintf(msg, sizeof(msg),
+		 "%s (Branch=%d DRAM-Bank=%d Buffer ID = %d RDWR=%s "
+		 "RAS=%d CAS=%d %s Err=0x%lx (%s))",
+		 type, branch >> 1, bank, buf_id, rdwr_str(rdwr), ras, cas,
+		 type, allErrors, error_name[errnum]);
+
+	/* Call the helper to output message */
+	edac_mc_handle_fbd_ue(mci, rank, channel, channel + 1, msg);
+}
+
+/*
+ * i7300_process_fatal_error_info(struct mem_ctl_info *mci,
+ * 				struct i7300_error_info *info,
+ * 				int handle_errors);
+ *
+ *	handle the Intel NON-FATAL errors, if any
+ */
+static void i7300_process_nonfatal_error_info(struct mem_ctl_info *mci,
+					struct i7300_error_info *info)
+{
+	char msg[EDAC_MC_LABEL_LEN + 1 + 90 + 80];
+	unsigned long allErrors;
+	int branch;
+	int channel;
+	int bank;
+	int rank;
+	int rdwr;
+	int ras, cas;
+	int errnum;
+
+	/* mask off the Error bits that are possible */
+	allErrors = from_nf_ferr(info->ferr_nf_fbd & FERR_NF_MASK);
+	if (!allErrors)
+		return;		/* if no error, return now */
+
+	/* ONLY ONE of the possible error bits will be set, as per the docs */
+
+	if (allErrors & (ERROR_NF_UNCORRECTABLE | ERROR_NF_RECOVERABLE)) {
+		i7300_proccess_non_recoverable_info(mci, info, allErrors);
+		return;
+	}
+
+	/* Correctable errors */
+	if (allErrors & ERROR_NF_CORRECTABLE) {
+		debugf0("\tCorrected bits= 0x%lx\n", allErrors);
+
+		branch = extract_fbdchan_indx(info->ferr_nf_fbd);
+
+		channel = 0;
+		if (REC_ECC_LOCATOR_ODD(info->redmemb))
+			channel = 1;
+
+		/* Convert channel to be based from zero, instead of
+		 * from branch base of 0 */
+		channel += branch;
+
+		bank = rec_bank(info);
+		rank = rec_rank(info);
+		rdwr = rec_rdwr(info);
+		ras = rec_ras(info);
+		cas = rec_cas(info);
+
+		/* Only 1 bit will be on */
+		errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+		debugf0("\t\tCSROW= %d Channel= %d  (Branch %d "
+			"DRAM Bank= %d rdwr= %s ras= %d cas= %d)\n",
+			rank, channel, branch >> 1, bank,
+			rdwr_str(rdwr), ras, cas);
+
+		/* Form out message */
+		snprintf(msg, sizeof(msg),
+			 "Corrected error (Branch=%d DRAM-Bank=%d RDWR=%s "
+			 "RAS=%d CAS=%d, CE Err=0x%lx (%s))",
+			 branch >> 1, bank, rdwr_str(rdwr), ras, cas,
+			 allErrors, error_name[errnum]);
+
+		/* Call the helper to output message */
+		edac_mc_handle_fbd_ce(mci, rank, channel, msg);
+
+		return;
+	}
+
+	/* Miscelaneous errors */
+	errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
+
+	branch = extract_fbdchan_indx(info->ferr_nf_fbd);
+
+	i7300_mc_printk(mci, KERN_EMERG,
+			"Non-Fatal misc error (Branch=%d Err=%#lx (%s))",
+			branch >> 1, allErrors, error_name[errnum]);
+}
+
+/*
+ *	i7300_process_error_info	Process the error info that is
+ *	in the 'info' structure, previously retrieved from hardware
+ */
+static void i7300_process_error_info(struct mem_ctl_info *mci,
+				struct i7300_error_info *info)
+{	u32 allErrors;
+
+	/* First handle any fatal errors that occurred */
+	allErrors = (info->ferr_fat_fbd & FERR_FAT_MASK);
+	i7300_proccess_non_recoverable_info(mci, info, allErrors);
+
+	/* now handle any non-fatal errors that occurred */
+	i7300_process_nonfatal_error_info(mci, info);
+}
+
+/*
+ *	i7300_clear_error	Retrieve any error from the hardware
+ *				but do NOT process that error.
+ *				Used for 'clearing' out of previous errors
+ *				Called by the Core module.
+ */
+static void i7300_clear_error(struct mem_ctl_info *mci)
+{
+	struct i7300_error_info info;
+
+	i7300_get_error_info(mci, &info);
+}
+
+/*
+ *	i7300_check_error	Retrieve and process errors reported by the
+ *				hardware. Called by the Core module.
+ */
+static void i7300_check_error(struct mem_ctl_info *mci)
+{
+	struct i7300_error_info info;
+	debugf4("MC%d: " __FILE__ ": %s()\n", mci->mc_idx, __func__);
+	i7300_get_error_info(mci, &info);
+	i7300_process_error_info(mci, &info);
+}
+
+/*
+ *	i7300_enable_error_reporting
+ *			Turn on the memory reporting features of the hardware
+ */
+static void i7300_enable_error_reporting(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 fbd_error_mask;
+
+	pvt = mci->pvt_info;
+
+	/* Read the FBD Error Mask Register */
+	pci_read_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			&fbd_error_mask);
+
+	/* Enable with a '0' */
+	fbd_error_mask &= ~(ENABLE_EMASK_ALL);
+
+	pci_write_config_dword(pvt->branchmap_werrors, EMASK_FBD,
+			fbd_error_mask);
+}
+#endif
+
+/*
+ * determine_mtr(pvt, csrow, channel)
+ *
+ * return the proper MTR register as determine by the csrow and desired channel
+ */
+static int decode_mtr(struct i7300_pvt *pvt,
+		      int slot, int ch, int branch,
+		      struct i7300_dimm_info *dinfo,
+		      struct csrow_info *p_csrow)
+{
+	int mtr, ans, addrBits, channel;
+
+	channel = to_channel(ch, branch);
+
+	mtr = pvt->mtr[slot][branch];
+	ans = MTR_DIMMS_PRESENT(mtr) ? 1 : 0;
+
+	debugf2("\tMTR%d CH%d: DIMMs are %s (mtr)\n",
+		slot, channel,
+		ans ? "Present" : "NOT Present");
+
+	/* Determine if there is a DIMM present in this DIMM slot */
+
+#if 0
+	if (!amb_present || !ans)
+		return 0;
+#else
+	if (!ans)
+		return 0;
+#endif
+
+	/* Start with the number of bits for a Bank
+	* on the DRAM */
+	addrBits = MTR_DRAM_BANKS_ADDR_BITS;
+	/* Add thenumber of ROW bits */
+	addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+	/* add the number of COLUMN bits */
+	addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+	/* add the number of RANK bits */
+	addrBits += MTR_DIMM_RANKS(mtr);
+
+	addrBits += 6;	/* add 64 bits per DIMM */
+	addrBits -= 20;	/* divide by 2^^20 */
+	addrBits -= 3;	/* 8 bits per bytes */
+
+	dinfo->megabytes = 1 << addrBits;
+
+	debugf2("\t\tWIDTH: x%d\n", MTR_DRAM_WIDTH(mtr));
+
+	debugf2("\t\tELECTRICAL THROTTLING is %s\n",
+		MTR_DIMMS_ETHROTTLE(mtr) ? "enabled" : "disabled");
+
+	debugf2("\t\tNUMBANK: %d bank(s)\n", MTR_DRAM_BANKS(mtr));
+	debugf2("\t\tNUMRANK: %s\n", MTR_DIMM_RANKS(mtr) ? "double" : "single");
+	debugf2("\t\tNUMROW: %s\n", numrow_toString[MTR_DIMM_ROWS(mtr)]);
+	debugf2("\t\tNUMCOL: %s\n", numcol_toString[MTR_DIMM_COLS(mtr)]);
+	debugf2("\t\tSIZE: %d MB\n", dinfo->megabytes);
+
+	p_csrow->grain = 8;
+	p_csrow->nr_pages = dinfo->megabytes << 8;
+	p_csrow->mtype = MEM_FB_DDR2;
+	p_csrow->edac_mode = EDAC_S8ECD8ED;
+
+	/* ask what device type on this row */
+	if (MTR_DRAM_WIDTH(mtr))
+		p_csrow->dtype = DEV_X8;
+	else
+		p_csrow->dtype = DEV_X4;
+
+	return mtr;
+}
+
+/*
+ *	print_dimm_size
+ *
+ *	also will output a DIMM matrix map, if debug is enabled, for viewing
+ *	how the DIMMs are populated
+ */
+static void print_dimm_size(struct i7300_pvt *pvt)
+{
+	struct i7300_dimm_info *dinfo;
+	char *p, *mem_buffer;
+	int space, n;
+	int channel, slot;
+
+	space = PAGE_SIZE;
+	mem_buffer = p = kmalloc(space, GFP_KERNEL);
+	if (p == NULL) {
+		i7300_printk(KERN_ERR, "MC: %s:%s() kmalloc() failed\n",
+			__FILE__, __func__);
+		return;
+	}
+
+	n = snprintf(p, space, "              ");
+	p += n;
+	space -= n;
+	for (channel = 0; channel < MAX_CHANNELS; channel++) {
+		n = snprintf(p, space, "channel %d | ", channel);
+		p += n;
+		space -= n;
+	}
+	debugf2("%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+	n = snprintf(p, space, "-------------------------------"
+		               "------------------------------");
+	p += n;
+	space -= n;
+	debugf2("%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		n = snprintf(p, space, "csrow/SLOT %d  ", slot);
+		p += n;
+		space -= n;
+
+		for (channel = 0; channel < MAX_CHANNELS; channel++) {
+			dinfo = &pvt->dimm_info[slot][channel];
+			n = snprintf(p, space, "%4d MB   | ", dinfo->megabytes);
+			p += n;
+			space -= n;
+		}
+
+		debugf2("%s\n", mem_buffer);
+		p = mem_buffer;
+		space = PAGE_SIZE;
+	}
+
+	n = snprintf(p, space, "-------------------------------"
+		               "------------------------------");
+	p += n;
+	space -= n;
+	debugf2("%s\n", mem_buffer);
+	p = mem_buffer;
+	space = PAGE_SIZE;
+
+	kfree(mem_buffer);
+}
+
+/*
+ *	i7300_init_csrows	Initialize the 'csrows' table within
+ *				the mci control	structure with the
+ *				addressing of memory.
+ *
+ *	return:
+ *		0	success
+ *		1	no actual memory found on this MC
+ */
+static int i7300_init_csrows(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	struct i7300_dimm_info *dinfo;
+	struct csrow_info *p_csrow;
+	int empty;
+	int mtr;
+	int ch, branch, slot, channel;
+
+	pvt = mci->pvt_info;
+
+	empty = 1;		/* Assume NO memory */
+
+	debugf2("Memory Technology Registers:\n");
+
+	/* Get the AMB present registers for the four channels */
+	for (branch = 0; branch < MAX_BRANCHES; branch++) {
+		/* Read and dump branch 0's MTRs */
+		channel = to_channel(0, branch);
+		pci_read_config_word(pvt->branch_pci[branch], AMBPRESENT_0,
+				&pvt->ambpresent[channel]);
+		debugf2("\t\tAMB-present CH%d = 0x%x:\n",
+			channel, pvt->ambpresent[channel]);
+
+		channel = to_channel(1, branch);
+		pci_read_config_word(pvt->branch_pci[branch], AMBPRESENT_1,
+				&pvt->ambpresent[channel]);
+		debugf2("\t\tAMB-present CH%d = 0x%x:\n",
+			channel, pvt->ambpresent[channel]);
+	}
+
+	/* Get the set of MTR[0-7] regs by each branch */
+	for (slot = 0; slot < MAX_SLOTS; slot++) {
+		int where = mtr_regs[slot];
+		for (branch = 0; branch < MAX_BRANCHES; branch++) {
+			pci_read_config_word(pvt->branch_pci[branch],
+					where,
+					&pvt->mtr[slot][branch]);
+			for (ch = 0; ch < MAX_BRANCHES; ch++) {
+				int channel = to_channel(ch, branch);
+
+				dinfo = &pvt->dimm_info[slot][channel];
+				p_csrow = &mci->csrows[slot];
+
+				mtr = decode_mtr(pvt, slot, ch, branch,
+							dinfo, p_csrow);
+				/* if no DIMMS on this row, continue */
+				if (!MTR_DIMMS_PRESENT(mtr))
+					continue;
+
+				p_csrow->csrow_idx = slot;
+
+				/* FAKE OUT VALUES, FIXME */
+				p_csrow->first_page = 0 + slot * 20;
+				p_csrow->last_page = 9 + slot * 20;
+				p_csrow->page_mask = 0xfff;
+
+				empty = 0;
+			}
+		}
+	}
+
+	return empty;
+}
+
+static void decode_mir(int mir_no, u16 mir[MAX_MIR])
+{
+	if (mir[mir_no] & 3)
+		debugf2("MIR%d: limit= 0x%x Branch(es) that participate: %s %s\n",
+			mir_no,
+			(mir[mir_no] >> 4) & 0xfff,
+			(mir[mir_no] & 1) ? "B0" : "",
+			(mir[mir_no] & 2) ? "B1": "");
+}
+
+/*
+ *	i7300_get_mc_regs	read in the necessary registers and
+ *				cache locally
+ *
+ *			Fills in the private data members
+ */
+static int i7300_get_mc_regs(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	u32 actual_tolm;
+	int i, rc;
+
+	pvt = mci->pvt_info;
+
+	pci_read_config_dword(pvt->system_address, AMBASE,
+			(u32 *) &pvt->ambase);
+
+	debugf2("AMBASE= 0x%lx\n", (long unsigned int)pvt->ambase);
+
+	/* Get the Branch Map regs */
+	pci_read_config_word(pvt->branchmap_werrors, TOLM, &pvt->tolm);
+	pvt->tolm >>= 12;
+	debugf2("TOLM (number of 256M regions) =%u (0x%x)\n", pvt->tolm,
+		pvt->tolm);
+
+	actual_tolm = (u32) ((1000l * pvt->tolm) >> (30 - 28));
+	debugf2("Actual TOLM byte addr=%u.%03u GB (0x%x)\n",
+		actual_tolm/1000, actual_tolm % 1000, pvt->tolm << 28);
+
+	pci_read_config_word(pvt->branchmap_werrors, MIR0, &pvt->mir[0]);
+	pci_read_config_word(pvt->branchmap_werrors, MIR1, &pvt->mir[1]);
+	pci_read_config_word(pvt->branchmap_werrors, MIR2, &pvt->mir[2]);
+
+	/* Decode the MIR regs */
+	for (i = 0; i < MAX_MIR; i++)
+		decode_mir(i, pvt->mir);
+
+	rc = i7300_init_csrows(mci);
+	if (rc < 0)
+		return rc;
+
+	/* Go and determine the size of each DIMM and place in an
+	 * orderly matrix */
+	print_dimm_size(pvt);
+
+	return 0;
+}
+
+/*
+ *	i7300_put_devices	'put' all the devices that we have
+ *				reserved via 'get'
+ */
+static void i7300_put_devices(struct mem_ctl_info *mci)
+{
+	struct i7300_pvt *pvt;
+	int branch;
+
+	pvt = mci->pvt_info;
+
+	/* Decrement usage count for devices */
+	for (branch = 0; branch < MAX_CH_PER_BRANCH; branch++)
+		pci_dev_put(pvt->branch_pci[branch]);
+	pci_dev_put(pvt->fsb_error_regs);
+	pci_dev_put(pvt->branchmap_werrors);
+}
+
+/*
+ *	i7300_get_devices	Find and perform 'get' operation on the MCH's
+ *			device/functions we want to reference for this driver
+ *
+ *			Need to 'get' device 16 func 1 and func 2
+ */
+static int i7300_get_devices(struct mem_ctl_info *mci, int dev_idx)
+{
+	struct i7300_pvt *pvt;
+	struct pci_dev *pdev;
+
+	pvt = mci->pvt_info;
+
+	/* Attempt to 'get' the MCH register we want */
+	pdev = NULL;
+	while (!pvt->branchmap_werrors || !pvt->fsb_error_regs) {
+		pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+				      PCI_DEVICE_ID_INTEL_I7300_MCH_ERR, pdev);
+		if (!pdev) {
+			/* End of list, leave */
+			i7300_printk(KERN_ERR,
+				"'system address,Process Bus' "
+				"device not found:"
+				"vendor 0x%x device 0x%x ERR funcs "
+				"(broken BIOS?)\n",
+				PCI_VENDOR_ID_INTEL,
+				PCI_DEVICE_ID_INTEL_I7300_MCH_ERR);
+			goto error;
+		}
+
+		/* Store device 16 funcs 1 and 2 */
+		switch (PCI_FUNC(pdev->devfn)) {
+		case 1:
+			pvt->branchmap_werrors = pdev;
+			break;
+		case 2:
+			pvt->fsb_error_regs = pdev;
+			break;
+		}
+	}
+
+	debugf1("System Address, processor bus- PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->system_address),
+		pvt->system_address->vendor, pvt->system_address->device);
+	debugf1("Branchmap, control and errors - PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->branchmap_werrors),
+		pvt->branchmap_werrors->vendor, pvt->branchmap_werrors->device);
+	debugf1("FSB Error Regs - PCI Bus ID: %s  %x:%x\n",
+		pci_name(pvt->fsb_error_regs),
+		pvt->fsb_error_regs->vendor, pvt->fsb_error_regs->device);
+
+	pvt->branch_pci[0] = pci_get_device(PCI_VENDOR_ID_INTEL,
+				            PCI_DEVICE_ID_INTEL_I7300_MCH_FB0,
+					    NULL);
+	if (!pvt->branch_pci[0]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 0' device not found:"
+			"vendor 0x%x device 0x%x Func 0 (broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_FB0);
+		goto error;
+	}
+
+	pvt->branch_pci[1] = pci_get_device(PCI_VENDOR_ID_INTEL,
+					    PCI_DEVICE_ID_INTEL_I7300_MCH_FB1,
+					    NULL);
+	if (!pvt->branch_pci[1]) {
+		i7300_printk(KERN_ERR,
+			"MC: 'BRANCH 1' device not found:"
+			"vendor 0x%x device 0x%x Func 0 "
+			"(broken BIOS?)\n",
+			PCI_VENDOR_ID_INTEL,
+			PCI_DEVICE_ID_INTEL_I7300_MCH_FB1);
+		goto error;
+	}
+
+	return 0;
+
+error:
+	i7300_put_devices(mci);
+	return -ENODEV;
+}
+
+/*
+ *	i7300_probe1	Probe for ONE instance of device to see if it is
+ *			present.
+ *	return:
+ *		0 for FOUND a device
+ *		< 0 for error code
+ */
+static int i7300_probe1(struct pci_dev *pdev, int dev_idx)
+{
+	struct mem_ctl_info *mci;
+	struct i7300_pvt *pvt;
+	int num_channels;
+	int num_dimms_per_channel;
+	int num_csrows;
+
+	if (dev_idx >= ARRAY_SIZE(i7300_devs))
+		return -EINVAL;
+
+	debugf0("MC: " __FILE__ ": %s(), pdev bus %u dev=0x%x fn=0x%x\n",
+		__func__,
+		pdev->bus->number,
+		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn));
+
+	/* We only are looking for func 0 of the set */
+	if (PCI_FUNC(pdev->devfn) != 0)
+		return -ENODEV;
+
+	/* As we don't have a motherboard identification routine to determine
+	 * actual number of slots/dimms per channel, we thus utilize the
+	 * resource as specified by the chipset. Thus, we might have
+	 * have more DIMMs per channel than actually on the mobo, but this
+	 * allows the driver to support upto the chipset max, without
+	 * some fancy mobo determination.
+	 */
+	num_dimms_per_channel = MAX_SLOTS;
+	num_channels = MAX_CHANNELS;
+	num_csrows = MAX_SLOTS * MAX_CHANNELS;
+
+	debugf0("MC: %s(): Number of - Channels= %d  DIMMS= %d  CSROWS= %d\n",
+		__func__, num_channels, num_dimms_per_channel, num_csrows);
+
+	/* allocate a new MC control structure */
+	mci = edac_mc_alloc(sizeof(*pvt), num_csrows, num_channels, 0);
+
+	if (mci == NULL)
+		return -ENOMEM;
+
+	debugf0("MC: " __FILE__ ": %s(): mci = %p\n", __func__, mci);
+
+	mci->dev = &pdev->dev;	/* record ptr  to the generic device */
+
+	pvt = mci->pvt_info;
+	pvt->system_address = pdev;	/* Record this device in our private */
+
+	/* 'get' the pci devices we want to reserve for our use */
+	if (i7300_get_devices(mci, dev_idx))
+		goto fail0;
+
+	mci->mc_idx = 0;
+	mci->mtype_cap = MEM_FLAG_FB_DDR2;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE;
+	mci->edac_cap = EDAC_FLAG_NONE;
+	mci->mod_name = "i7300_edac.c";
+	mci->mod_ver = I7300_REVISION;
+	mci->ctl_name = i7300_devs[dev_idx].ctl_name;
+	mci->dev_name = pci_name(pdev);
+	mci->ctl_page_to_phys = NULL;
+
+#if 0
+	/* Set the function pointer to an actual operation function */
+	mci->edac_check = i7300_check_error;
+#endif
+
+	/* initialize the MC control structure 'csrows' table
+	 * with the mapping and control information */
+	if (i7300_get_mc_regs(mci)) {
+		debugf0("MC: Setting mci->edac_cap to EDAC_FLAG_NONE\n"
+			"    because i7300_init_csrows() returned nonzero "
+			"value\n");
+		mci->edac_cap = EDAC_FLAG_NONE;	/* no csrows found */
+	} else {
+#if 0
+		debugf1("MC: Enable error reporting now\n");
+		i7300_enable_error_reporting(mci);
+#endif
+	}
+
+	/* add this new MC control structure to EDAC's list of MCs */
+	if (edac_mc_add_mc(mci)) {
+		debugf0("MC: " __FILE__
+			": %s(): failed edac_mc_add_mc()\n", __func__);
+		/* FIXME: perhaps some code should go here that disables error
+		 * reporting if we just enabled it
+		 */
+		goto fail1;
+	}
+
+#if 0
+	i7300_clear_error(mci);
+#endif
+
+	/* allocating generic PCI control info */
+	i7300_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
+	if (!i7300_pci) {
+		printk(KERN_WARNING
+			"%s(): Unable to create PCI control\n",
+			__func__);
+		printk(KERN_WARNING
+			"%s(): PCI error report via EDAC not setup\n",
+			__func__);
+	}
+
+	return 0;
+
+	/* Error exit unwinding stack */
+fail1:
+
+	i7300_put_devices(mci);
+
+fail0:
+	edac_mc_free(mci);
+	return -ENODEV;
+}
+
+/*
+ *	i7300_init_one	constructor for one instance of device
+ *
+ * 	returns:
+ *		negative on error
+ *		count (>= 0)
+ */
+static int __devinit i7300_init_one(struct pci_dev *pdev,
+				const struct pci_device_id *id)
+{
+	int rc;
+
+	debugf0("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* wake up device */
+	rc = pci_enable_device(pdev);
+	if (rc == -EIO)
+		return rc;
+
+	/* now probe and enable the device */
+	return i7300_probe1(pdev, id->driver_data);
+}
+
+/*
+ *	i7300_remove_one	destructor for one instance of device
+ *
+ */
+static void __devexit i7300_remove_one(struct pci_dev *pdev)
+{
+	struct mem_ctl_info *mci;
+
+	debugf0(__FILE__ ": %s()\n", __func__);
+
+	if (i7300_pci)
+		edac_pci_release_generic_ctl(i7300_pci);
+
+	mci = edac_mc_del_mc(&pdev->dev);
+	if (!mci)
+		return;
+
+	/* retrieve references to resources, and free those resources */
+	i7300_put_devices(mci);
+
+	edac_mc_free(mci);
+}
+
+/*
+ *	pci_device_id	table for which devices we are looking for
+ *
+ *	The "E500P" device is the first device supported.
+ */
+static const struct pci_device_id i7300_pci_tbl[] __devinitdata = {
+	{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_I7300_MCH_ERR)},
+	{0,}			/* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i7300_pci_tbl);
+
+/*
+ *	i7300_driver	pci_driver structure for this module
+ *
+ */
+static struct pci_driver i7300_driver = {
+	.name = "i7300_edac",
+	.probe = i7300_init_one,
+	.remove = __devexit_p(i7300_remove_one),
+	.id_table = i7300_pci_tbl,
+};
+
+/*
+ *	i7300_init		Module entry function
+ *			Try to initialize this module for its devices
+ */
+static int __init i7300_init(void)
+{
+	int pci_rc;
+
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+
+	/* Ensure that the OPSTATE is set correctly for POLL or NMI */
+	opstate_init();
+
+	pci_rc = pci_register_driver(&i7300_driver);
+
+	return (pci_rc < 0) ? pci_rc : 0;
+}
+
+/*
+ *	i7300_exit()	Module exit function
+ *			Unregister the driver
+ */
+static void __exit i7300_exit(void)
+{
+	debugf2("MC: " __FILE__ ": %s()\n", __func__);
+	pci_unregister_driver(&i7300_driver);
+}
+
+module_init(i7300_init);
+module_exit(i7300_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@redhat.com>");
+MODULE_AUTHOR("Red Hat Inc. (http://www.redhat.com)");
+MODULE_DESCRIPTION("MC Driver for Intel I7300 memory controllers - "
+		   I7300_REVISION);
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");

include/linux/pci_ids.h

@@ -815,7 +815,7 @@
 
 #define PCI_VENDOR_ID_ANIGMA		0x1051
 #define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
-  
+
 #define PCI_VENDOR_ID_EFAR		0x1055
 #define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
 #define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
@@ -1446,7 +1446,7 @@
 
 #define PCI_VENDOR_ID_ZIATECH		0x1138
 #define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
- 
+
 
 #define PCI_VENDOR_ID_SYSKONNECT	0x1148
 #define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
@@ -1600,8 +1600,8 @@
 #define PCI_DEVICE_ID_RP8OCTA		0x0005
 #define PCI_DEVICE_ID_RP8J		0x0006
 #define PCI_DEVICE_ID_RP4J		0x0007
-#define PCI_DEVICE_ID_RP8SNI		0x0008	
-#define PCI_DEVICE_ID_RP16SNI		0x0009	
+#define PCI_DEVICE_ID_RP8SNI		0x0008
+#define PCI_DEVICE_ID_RP16SNI		0x0009
 #define PCI_DEVICE_ID_RPP4		0x000A
 #define PCI_DEVICE_ID_RPP8		0x000B
 #define PCI_DEVICE_ID_RP4M		0x000D
@@ -1611,9 +1611,9 @@
 #define PCI_DEVICE_ID_URP8INTF		0x0802
 #define PCI_DEVICE_ID_URP16INTF		0x0803
 #define PCI_DEVICE_ID_URP8OCTA		0x0805
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C       
+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C
 #define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
-#define PCI_DEVICE_ID_CRP16INTF		0x0903       
+#define PCI_DEVICE_ID_CRP16INTF		0x0903
 
 #define PCI_VENDOR_ID_CYCLADES		0x120e
 #define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
@@ -2139,7 +2139,7 @@
 #define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
 
 #define PCI_VENDOR_ID_ZOLTRIX		0x15b0
-#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0 
+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0
 
 #define PCI_VENDOR_ID_MELLANOX		0x15b3
 #define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
@@ -2413,7 +2413,7 @@
 #define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
 #define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
 #define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
-#define PCI_DEVICE_ID_INTEL_7505_0	0x2550  
+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550
 #define PCI_DEVICE_ID_INTEL_7205_0	0x255d
 #define PCI_DEVICE_ID_INTEL_82437	0x122d
 #define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
@@ -2616,6 +2616,9 @@
 #define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
 #define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
 #define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_ERR 0x360c
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB0 0x360f
+#define PCI_DEVICE_ID_INTEL_I7300_MCH_FB1 0x3610
 #define PCI_DEVICE_ID_INTEL_IOAT_CNB	0x360b
 #define PCI_DEVICE_ID_INTEL_FBD_CNB	0x360c
 #define PCI_DEVICE_ID_INTEL_IOAT_JSF0	0x3710