提交 fc4eba58 编写于 作者: H Hannes Frederic Sowa 提交者: David S. Miller

ipv6: make unsolicited report intervals configurable for mld

Commit cab70040 ("net: igmp:
Reduce Unsolicited report interval to 1s when using IGMPv3") and
2690048c ("net: igmp: Allow user-space
configuration of igmp unsolicited report interval") by William Manley made
igmp unsolicited report intervals configurable per interface and corrected
the interval of unsolicited igmpv3 report messages resendings to 1s.

Same needs to be done for IPv6:

MLDv1 (RFC2710 7.10.): 10 seconds
MLDv2 (RFC3810 9.11.): 1 second

Both intervals are configurable via new procfs knobs
mldv1_unsolicited_report_interval and mldv2_unsolicited_report_interval.

(also added .force_mld_version to ipv6_devconf_dflt to bring structs in
line without semantic changes)

v2:
a) Joined documentation update for IPv4 and IPv6 MLD/IGMP
   unsolicited_report_interval procfs knobs.
b) incorporate stylistic feedback from William Manley

v3:
a) add new DEVCONF_* values to the end of the enum (thanks to David
   Miller)

Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: William Manley <william.manley@youview.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 74c181d5
......@@ -1039,7 +1039,15 @@ disable_policy - BOOLEAN
disable_xfrm - BOOLEAN
Disable IPSEC encryption on this interface, whatever the policy
igmpv2_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
IGMPv1 or IGMPv2 report retransmit will take place.
Default: 10000 (10 seconds)
igmpv3_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
IGMPv3 report retransmit will take place.
Default: 1000 (1 seconds)
tag - INTEGER
Allows you to write a number, which can be used as required.
......@@ -1331,6 +1339,16 @@ ndisc_notify - BOOLEAN
1 - Generate unsolicited neighbour advertisements when device is brought
up or hardware address changes.
mldv1_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
MLDv1 report retransmit will take place.
Default: 10000 (10 seconds)
mldv2_unsolicited_report_interval - INTEGER
The interval in milliseconds in which the next unsolicited
MLDv2 report retransmit will take place.
Default: 1000 (1 second)
icmp/*:
ratelimit - INTEGER
Limit the maximal rates for sending ICMPv6 packets.
......
......@@ -19,6 +19,8 @@ struct ipv6_devconf {
__s32 rtr_solicit_interval;
__s32 rtr_solicit_delay;
__s32 force_mld_version;
__s32 mldv1_unsolicited_report_interval;
__s32 mldv2_unsolicited_report_interval;
#ifdef CONFIG_IPV6_PRIVACY
__s32 use_tempaddr;
__s32 temp_valid_lft;
......
......@@ -160,6 +160,8 @@ enum {
DEVCONF_ACCEPT_DAD,
DEVCONF_FORCE_TLLAO,
DEVCONF_NDISC_NOTIFY,
DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL,
DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL,
DEVCONF_MAX
};
......
......@@ -177,6 +177,8 @@ static struct ipv6_devconf ipv6_devconf __read_mostly = {
.accept_redirects = 1,
.autoconf = 1,
.force_mld_version = 0,
.mldv1_unsolicited_report_interval = 10 * HZ,
.mldv2_unsolicited_report_interval = HZ,
.dad_transmits = 1,
.rtr_solicits = MAX_RTR_SOLICITATIONS,
.rtr_solicit_interval = RTR_SOLICITATION_INTERVAL,
......@@ -211,6 +213,9 @@ static struct ipv6_devconf ipv6_devconf_dflt __read_mostly = {
.accept_ra = 1,
.accept_redirects = 1,
.autoconf = 1,
.force_mld_version = 0,
.mldv1_unsolicited_report_interval = 10 * HZ,
.mldv2_unsolicited_report_interval = HZ,
.dad_transmits = 1,
.rtr_solicits = MAX_RTR_SOLICITATIONS,
.rtr_solicit_interval = RTR_SOLICITATION_INTERVAL,
......@@ -4179,6 +4184,10 @@ static inline void ipv6_store_devconf(struct ipv6_devconf *cnf,
array[DEVCONF_RTR_SOLICIT_DELAY] =
jiffies_to_msecs(cnf->rtr_solicit_delay);
array[DEVCONF_FORCE_MLD_VERSION] = cnf->force_mld_version;
array[DEVCONF_MLDV1_UNSOLICITED_REPORT_INTERVAL] =
jiffies_to_msecs(cnf->mldv1_unsolicited_report_interval);
array[DEVCONF_MLDV2_UNSOLICITED_REPORT_INTERVAL] =
jiffies_to_msecs(cnf->mldv2_unsolicited_report_interval);
#ifdef CONFIG_IPV6_PRIVACY
array[DEVCONF_USE_TEMPADDR] = cnf->use_tempaddr;
array[DEVCONF_TEMP_VALID_LFT] = cnf->temp_valid_lft;
......@@ -4862,6 +4871,22 @@ static struct addrconf_sysctl_table
.mode = 0644,
.proc_handler = proc_dointvec,
},
{
.procname = "mldv1_unsolicited_report_interval",
.data =
&ipv6_devconf.mldv1_unsolicited_report_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_ms_jiffies,
},
{
.procname = "mldv2_unsolicited_report_interval",
.data =
&ipv6_devconf.mldv2_unsolicited_report_interval,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = proc_dointvec_ms_jiffies,
},
#ifdef CONFIG_IPV6_PRIVACY
{
.procname = "use_tempaddr",
......
......@@ -108,7 +108,6 @@ static int ip6_mc_leave_src(struct sock *sk, struct ipv6_mc_socklist *iml,
struct inet6_dev *idev);
#define IGMP6_UNSOLICITED_IVAL (10*HZ)
#define MLD_QRV_DEFAULT 2
#define MLD_V1_SEEN(idev) (dev_net((idev)->dev)->ipv6.devconf_all->force_mld_version == 1 || \
......@@ -129,6 +128,18 @@ int sysctl_mld_max_msf __read_mostly = IPV6_MLD_MAX_MSF;
pmc != NULL; \
pmc = rcu_dereference(pmc->next))
static int unsolicited_report_interval(struct inet6_dev *idev)
{
int iv;
if (MLD_V1_SEEN(idev))
iv = idev->cnf.mldv1_unsolicited_report_interval;
else
iv = idev->cnf.mldv2_unsolicited_report_interval;
return iv > 0 ? iv : 1;
}
int ipv6_sock_mc_join(struct sock *sk, int ifindex, const struct in6_addr *addr)
{
struct net_device *dev = NULL;
......@@ -2158,7 +2169,7 @@ static void igmp6_join_group(struct ifmcaddr6 *ma)
igmp6_send(&ma->mca_addr, ma->idev->dev, ICMPV6_MGM_REPORT);
delay = net_random() % IGMP6_UNSOLICITED_IVAL;
delay = net_random() % unsolicited_report_interval(ma->idev);
spin_lock_bh(&ma->mca_lock);
if (del_timer(&ma->mca_timer)) {
......@@ -2325,7 +2336,7 @@ void ipv6_mc_init_dev(struct inet6_dev *idev)
setup_timer(&idev->mc_dad_timer, mld_dad_timer_expire,
(unsigned long)idev);
idev->mc_qrv = MLD_QRV_DEFAULT;
idev->mc_maxdelay = IGMP6_UNSOLICITED_IVAL;
idev->mc_maxdelay = unsolicited_report_interval(idev);
idev->mc_v1_seen = 0;
write_unlock_bh(&idev->lock);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册