diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 058e76415042339d7a8bfed0acf2c50a48aa68f2..6613d323262a7d3c0921c09d7e635624ccd6681e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -281,16 +281,7 @@ struct iwl_cmd_header { #define RATE_MCS_ANT_C_MSK 0x10000 #define RATE_MCS_ANT_ABC_MSK 0x1C000 - -/** - * struct iwl4965_tx_power - txpower format used in REPLY_SCAN_CMD - * - * Scan uses only one transmitter, so only one analog/dsp gain pair is needed. - */ -struct iwl4965_tx_power { - u8 tx_gain; /* gain for analog radio */ - u8 dsp_atten; /* gain for DSP */ -} __attribute__ ((packed)); +#define RATE_MCS_ANT_INIT_IND 1 #define POWER_TABLE_NUM_ENTRIES 33 #define POWER_TABLE_NUM_HT_OFDM_ENTRIES 32 @@ -2128,7 +2119,8 @@ struct iwl_scan_channel { */ u8 type; u8 channel; /* band is selected by iwl4965_scan_cmd "flags" field */ - struct iwl4965_tx_power tpc; + u8 tx_gain; /* gain for analog radio */ + u8 dsp_atten; /* gain for DSP */ __le16 active_dwell; /* in 1024-uSec TU (time units), typ 5-50 */ __le16 passive_dwell; /* in 1024-uSec TU (time units), typ 20-500 */ } __attribute__ ((packed)); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 7e20f46132d54d764d8d22a96d8a1b707f6a44d4..9794904b5bd9c9f63c4fafe366c02474eed0aa8d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -874,6 +874,7 @@ int iwl_init_drv(struct iwl_priv *priv) /* Choose which receivers/antennas to use */ iwl_set_rxon_chain(priv); + iwl_init_scan_params(priv); if (priv->cfg->mod_params->enable_qos) priv->qos_data.qos_enable = 1; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 2eb08f3937f6e576558934e030a7d830c9c47c91..8d9fde61a365e50001329dadf3cb2df80805a55b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -267,6 +267,7 @@ static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) /******************************************************************************* * Scanning ******************************************************************************/ +void iwl_init_scan_params(struct iwl_priv *priv); int iwl_scan_cancel(struct iwl_priv *priv); int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); const char *iwl_escape_essid(const char *essid, u8 essid_len); diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index 69765c975d3864cb567b2887c1ffee24268383f5..ef7415928b74124302303fdb5892d6137e7f6e6f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -157,35 +157,11 @@ struct iwl4965_channel_tgh_info { s64 last_radar_time; }; -/* current Tx power values to use, one for each rate for each channel. - * requested power is limited by: - * -- regulatory EEPROM limits for this channel - * -- hardware capabilities (clip-powers) - * -- spectrum management - * -- user preference (e.g. iwconfig) - * when requested power is set, base power index must also be set. */ -struct iwl4965_channel_power_info { - struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 base_power_index; /* gain index for power at factory temp. */ - s8 requested_power; /* power (dBm) requested for this chnl/rate */ -}; - -/* current scan Tx power values to use, one for each scan rate for each - * channel. */ -struct iwl4965_scan_power_info { - struct iwl4965_tx_power tpc; /* actual radio and DSP gain settings */ - s8 power_table_index; /* actual (compenst'd) index into gain table */ - s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */ -}; - /* * One for each channel, holds all channel setup data * Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant * with one another! */ -#define IWL4965_MAX_RATE (33) - struct iwl_channel_info { struct iwl4965_channel_tgd_info tgd; struct iwl4965_channel_tgh_info tgh; @@ -204,11 +180,6 @@ struct iwl_channel_info { u8 band_index; /* 0-4, maps channel to band1/2/3/4/5 */ enum ieee80211_band band; - /* Radio/DSP gain settings for each "normal" data Tx rate. - * These include, in addition to RF and DSP gain, a few fields for - * remembering/modifying gain settings (indexes). */ - struct iwl4965_channel_power_info power_info[IWL4965_MAX_RATE]; - /* FAT channel info */ s8 fat_max_power_avg; /* (dBm) regul. eeprom, normal Tx, any rate */ s8 fat_curr_txpow; /* (dBm) regulatory/spectrum/user (not h/w) */ @@ -216,9 +187,6 @@ struct iwl_channel_info { s8 fat_scan_power; /* (dBm) eeprom, direct scans, any rate */ u8 fat_flags; /* flags copied from EEPROM */ u8 fat_extension_channel; /* HT_IE_EXT_CHANNEL_* */ - - /* Radio/DSP gain settings for each scan rate, for directed scans. */ - struct iwl4965_scan_power_info scan_pwr_info[IWL_NUM_SCAN_RATES]; }; struct iwl4965_clip_group { @@ -974,6 +942,7 @@ struct iwl_priv { u8 direct_ssid_len; u8 direct_ssid[IW_ESSID_MAX_SIZE]; struct iwl_scan_cmd *scan; + u32 scan_tx_ant[IEEE80211_NUM_BANDS]; /* spinlock */ spinlock_t lock; /* protect general shared data */ diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 7b9475b7f0f4e6763038329a5931c73db536180c..5ca181f7125dd81d55c16767ba766c59b4d0ab96 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -58,7 +58,9 @@ #define IWL_PASSIVE_DWELL_BASE (100) #define IWL_CHANNEL_TUNE_TIME 5 - +static int scan_tx_ant[3] = { + RATE_MCS_ANT_A_MSK, RATE_MCS_ANT_B_MSK, RATE_MCS_ANT_C_MSK +}; static int iwl_is_empty_essid(const char *essid, int essid_len) { @@ -385,8 +387,7 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq); - ch_info = iwl_get_channel_info(priv, band, - scan_ch->channel); + ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); if (!is_channel_valid(ch_info)) { IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", scan_ch->channel); @@ -395,9 +396,9 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, if (!is_active || is_channel_passive(ch_info) || (channels[i].flags & IEEE80211_CHAN_PASSIVE_SCAN)) - scan_ch->type = 0; /* passive */ + scan_ch->type = 0; else - scan_ch->type = 1; /* active */ + scan_ch->type = 1; if (scan_ch->type & 1) scan_ch->type |= (direct_mask << 1); @@ -406,17 +407,15 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, scan_ch->passive_dwell = cpu_to_le16(passive_dwell); /* Set txpower levels to defaults */ - scan_ch->tpc.dsp_atten = 110; - /* scan_pwr_info->tpc.dsp_atten; */ + scan_ch->dsp_atten = 110; - /*scan_pwr_info->tpc.tx_gain; */ if (band == IEEE80211_BAND_5GHZ) - scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3; + scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3; else { - scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3)); + scan_ch->tx_gain = ((1 << 5) | (5 << 3)); /* NOTE: if we were doing 6Mb OFDM for scans we'd use * power level: - * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3; + * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3; */ } @@ -434,6 +433,14 @@ static int iwl_get_channels_for_scan(struct iwl_priv *priv, return added; } +void iwl_init_scan_params(struct iwl_priv *priv) +{ + if (!priv->scan_tx_ant[IEEE80211_BAND_5GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_5GHZ] = RATE_MCS_ANT_INIT_IND; + if (!priv->scan_tx_ant[IEEE80211_BAND_2GHZ]) + priv->scan_tx_ant[IEEE80211_BAND_2GHZ] = RATE_MCS_ANT_INIT_IND; +} + int iwl_scan_initiate(struct iwl_priv *priv) { if (priv->iw_mode == IEEE80211_IF_TYPE_AP) { @@ -522,7 +529,7 @@ static u16 iwl_supported_rate_to_ie(u8 *ie, u16 supported_rate, static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, - u8 *pos, int *left) + u8 *pos, int *left) { struct ieee80211_ht_cap *ht_cap; @@ -547,10 +554,11 @@ static void iwl_ht_cap_to_ie(const struct ieee80211_supported_band *sband, /** * iwl_fill_probe_req - fill in all required fields and IE for probe request */ + static u16 iwl_fill_probe_req(struct iwl_priv *priv, enum ieee80211_band band, struct ieee80211_mgmt *frame, - int left, int is_direct) + int left) { int len = 0; u8 *pos = NULL; @@ -558,12 +566,12 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, const struct ieee80211_supported_band *sband = iwl_get_hw_mode(priv, band); + /* Make sure there is enough space for the probe request, * two mandatory IEs and the data */ left -= 24; if (left < 0) return 0; - len += 24; frame->frame_control = cpu_to_le16(IEEE80211_STYPE_PROBE_REQ); memcpy(frame->da, iwl_bcast_addr, ETH_ALEN); @@ -571,38 +579,25 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, memcpy(frame->bssid, iwl_bcast_addr, ETH_ALEN); frame->seq_ctrl = 0; - /* fill in our indirect SSID IE */ + len += 24; + /* ...next IE... */ + pos = &frame->u.probe_req.variable[0]; + /* fill in our indirect SSID IE */ left -= 2; if (left < 0) return 0; - len += 2; - pos = &(frame->u.probe_req.variable[0]); *pos++ = WLAN_EID_SSID; *pos++ = 0; - /* fill in our direct SSID IE... */ - if (is_direct) { - /* ...next IE... */ - left -= 2 + priv->essid_len; - if (left < 0) - return 0; - /* ... fill it in... */ - *pos++ = WLAN_EID_SSID; - *pos++ = priv->essid_len; - memcpy(pos, priv->essid, priv->essid_len); - pos += priv->essid_len; - len += 2 + priv->essid_len; - } + len += 2; /* fill in supported rate */ - /* ...next IE... */ left -= 2; if (left < 0) return 0; - /* ... fill it in... */ *pos++ = WLAN_EID_SUPP_RATES; *pos = 0; @@ -614,15 +609,16 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, cck_rates = IWL_CCK_RATES_MASK & active_rates; ret_rates = iwl_supported_rate_to_ie(pos, cck_rates, - active_rate_basic, &left); + active_rate_basic, &left); active_rates &= ~ret_rates; ret_rates = iwl_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); + active_rate_basic, &left); active_rates &= ~ret_rates; len += 2 + *pos; pos += (*pos) + 1; + if (active_rates == 0) goto fill_end; @@ -634,27 +630,46 @@ static u16 iwl_fill_probe_req(struct iwl_priv *priv, /* ... fill it in... */ *pos++ = WLAN_EID_EXT_SUPP_RATES; *pos = 0; - iwl_supported_rate_to_ie(pos, active_rates, - active_rate_basic, &left); - if (*pos > 0) + iwl_supported_rate_to_ie(pos, active_rates, active_rate_basic, &left); + if (*pos > 0) { len += 2 + *pos; + pos += (*pos) + 1; + } else { + pos--; + } fill_end: - /* fill in HT IE */ + left -= 2; if (left < 0) return 0; *pos++ = WLAN_EID_HT_CAPABILITY; *pos = 0; - iwl_ht_cap_to_ie(sband, pos, &left); - if (*pos > 0) len += 2 + *pos; + return (u16)len; } +static u32 iwl_scan_tx_ant(struct iwl_priv *priv, enum ieee80211_band band) +{ + int i, ind; + + ind = priv->scan_tx_ant[band]; + for (i = 0; i < priv->hw_params.tx_chains_num; i++) { + ind = (ind+1) >= priv->hw_params.tx_chains_num ? 0 : ind+1; + if (priv->hw_params.valid_tx_ant & (1 << ind)) { + priv->scan_tx_ant[band] = ind; + break; + } + } + + return scan_tx_ant[ind]; +} + + static void iwl_bg_request_scan(struct work_struct *data) { struct iwl_priv *priv = @@ -666,10 +681,12 @@ static void iwl_bg_request_scan(struct work_struct *data) }; struct iwl_scan_cmd *scan; struct ieee80211_conf *conf = NULL; + int ret = 0; + u32 tx_ant; u16 cmd_len; enum ieee80211_band band; u8 direct_mask; - int ret = 0; + u8 rx_chain = 0x7; /* bitmap: ABC chains */ conf = ieee80211_get_hw_conf(priv->hw); @@ -761,25 +778,23 @@ static void iwl_bg_request_scan(struct work_struct *data) /* We should add the ability for user to lock to PASSIVE ONLY */ if (priv->one_direct_scan) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s'\n", - iwl_escape_essid(priv->direct_ssid, - priv->direct_ssid_len)); + IWL_DEBUG_SCAN("Start direct scan for '%s'\n", + iwl_escape_essid(priv->direct_ssid, + priv->direct_ssid_len)); scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->direct_ssid_len; memcpy(scan->direct_scan[0].ssid, priv->direct_ssid, priv->direct_ssid_len); direct_mask = 1; } else if (!iwl_is_associated(priv) && priv->essid_len) { - IWL_DEBUG_SCAN - ("Kicking off one direct scan for '%s' when not associated\n", - iwl_escape_essid(priv->essid, priv->essid_len)); + IWL_DEBUG_SCAN("Start direct scan for '%s' (not associated)\n", + iwl_escape_essid(priv->essid, priv->essid_len)); scan->direct_scan[0].id = WLAN_EID_SSID; scan->direct_scan[0].len = priv->essid_len; memcpy(scan->direct_scan[0].ssid, priv->essid, priv->essid_len); direct_mask = 1; } else { - IWL_DEBUG_SCAN("Kicking off one indirect scan.\n"); + IWL_DEBUG_SCAN("Start indirect scan.\n"); direct_mask = 0; } @@ -790,64 +805,73 @@ static void iwl_bg_request_scan(struct work_struct *data) switch (priv->scan_bands) { case 2: + band = IEEE80211_BAND_2GHZ; scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; - scan->tx_cmd.rate_n_flags = + tx_ant = iwl_scan_tx_ant(priv, band); + if (priv->active_rxon.flags & RXON_FLG_CHANNEL_MODE_PURE_40_MSK) + scan->tx_cmd.rate_n_flags = + iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, + tx_ant); + else + scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, - RATE_MCS_ANT_B_MSK| + tx_ant | RATE_MCS_CCK_MSK); - scan->good_CRC_th = 0; - band = IEEE80211_BAND_2GHZ; break; case 1: + band = IEEE80211_BAND_5GHZ; + tx_ant = iwl_scan_tx_ant(priv, band); scan->tx_cmd.rate_n_flags = iwl_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, - RATE_MCS_ANT_B_MSK); + tx_ant); scan->good_CRC_th = IWL_GOOD_CRC_TH; - band = IEEE80211_BAND_5GHZ; - break; + /* Force use of chains B and C (0x6) for scan Rx for 4965 + * Avoid A (0x1) because of its off-channel reception on A-band. + * MIMO is not used here, but value is required */ + if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965) + rx_chain = 0x6; + + break; default: IWL_WARNING("Invalid scan band count\n"); goto done; } - /* We don't build a direct scan probe request; the uCode will do - * that based on the direct_mask added to each channel entry */ + scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | + cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | + (rx_chain << RXON_RX_CHAIN_FORCE_SEL_POS) | + (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); + cmd_len = iwl_fill_probe_req(priv, band, - (struct ieee80211_mgmt *)scan->data, - IWL_MAX_SCAN_SIZE - sizeof(*scan), 0); + (struct ieee80211_mgmt *)scan->data, + IWL_MAX_SCAN_SIZE - sizeof(*scan)); scan->tx_cmd.len = cpu_to_le16(cmd_len); - /* select Rx chains */ - - /* Force use of chains B and C (0x6) for scan Rx. - * Avoid A (0x1) because of its off-channel reception on A-band. - * MIMO is not used here, but value is required to make uCode happy. */ - scan->rx_chain = RXON_RX_CHAIN_DRIVER_FORCE_MSK | - cpu_to_le16((0x7 << RXON_RX_CHAIN_VALID_POS) | - (0x6 << RXON_RX_CHAIN_FORCE_SEL_POS) | - (0x7 << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS)); if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) scan->filter_flags = RXON_FILTER_PROMISC_MSK; + scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | + RXON_FILTER_BCON_AWARE_MSK); + if (direct_mask) scan->channel_count = - iwl_get_channels_for_scan( - priv, band, 1, /* active */ - direct_mask, + iwl_get_channels_for_scan(priv, band, 1, /* active */ + direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); else scan->channel_count = - iwl_get_channels_for_scan( - priv, band, 0, /* passive */ - direct_mask, + iwl_get_channels_for_scan(priv, band, 0, /* passive */ + direct_mask, (void *)&scan->data[le16_to_cpu(scan->tx_cmd.len)]); + if (scan->channel_count == 0) { + IWL_DEBUG_SCAN("channel count %d\n", scan->channel_count); + goto done; + } - scan->filter_flags |= (RXON_FILTER_ACCEPT_GRP_MSK | - RXON_FILTER_BCON_AWARE_MSK); cmd.len += le16_to_cpu(scan->tx_cmd.len) + scan->channel_count * sizeof(struct iwl_scan_channel); cmd.data = scan;