Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
提交 f3f704d3 编写于 作者: M Michael Hennerich 提交者： Bryan Wu
浏览文件
操作

Blackfin arch: SPI_MMC is now mainlined MMC_SPI 

Signed-off-by: NMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
上级 4aad7ec3
显示空白变更内容
内联 并排
Showing with 78 addition and 170 deletion
arch/blackfin/mach-bf518/boards/ezbrd.c
浏览文件 @ f3f704d3
...@@ -182,9 +182,9 @@ static struct bfin5xx_spi_chip spi_switch_info = { ...@@ -182,9 +182,9 @@ static struct bfin5xx_spi_chip spi_switch_info = {
#endif #endif
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -276,23 +276,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -276,23 +276,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
#endif #endif
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc_dummy", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 0, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf527/boards/cm_bf527.c
浏览文件 @ f3f704d3
...@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { ...@@ -487,9 +487,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -585,23 +585,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info, .controller_data = &ad9960_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf527/boards/ezbrd.c
浏览文件 @ f3f704d3
...@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { ...@@ -256,9 +256,9 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -366,23 +366,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc_dummy", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 0, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf533/boards/blackstamp.c
浏览文件 @ f3f704d3
...@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { ...@@ -101,9 +101,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -129,23 +129,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf533/boards/cm_bf533.c
浏览文件 @ f3f704d3
...@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = { ...@@ -96,9 +96,9 @@ static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -138,23 +138,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 0,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf533/boards/ip0x.c
浏览文件 @ f3f704d3
...@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = { ...@@ -127,8 +127,8 @@ static struct platform_device dm9000_device2 = {
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* all SPI peripherals info goes here */ /* all SPI peripherals info goes here */
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
/* /*
* CPOL (Clock Polarity) * CPOL (Clock Polarity)
* 0 - Active high SCK * 0 - Active high SCK
...@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = { ...@@ -152,14 +152,13 @@ static struct bfin5xx_spi_chip spi_mmc_chip_info = {
/* Notice: for blackfin, the speed_hz is the value of register /* Notice: for blackfin, the speed_hz is the value of register
* SPI_BAUD, not the real baudrate */ * SPI_BAUD, not the real baudrate */
static struct spi_board_info bfin_spi_board_info[] __initdata = { static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 2, .max_speed_hz = 2,
.bus_num = 1, .bus_num = 1,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
}, },
#endif #endif
}; };
......
arch/blackfin/mach-bf537/boards/cm_bf537.c
浏览文件 @ f3f704d3
...@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { ...@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 1,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf537/boards/minotaur.c
浏览文件 @ f3f704d3
...@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { ...@@ -134,9 +134,9 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -156,23 +156,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc_dummy", .modalias = "mmc_spi",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 0, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf537/boards/pnav10.c
浏览文件 @ f3f704d3
...@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { ...@@ -289,9 +289,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -364,23 +364,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info, .controller_data = &ad9960_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc_dummy", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = 7, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{
.modalias = "spi_mmc",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf537/boards/tcm_bf537.c
浏览文件 @ f3f704d3
...@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { ...@@ -108,9 +108,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -160,23 +160,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{
.modalias = "spi_mmc_dummy",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
.chip_select = 7,
.platform_data = NULL,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3,
},
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
arch/blackfin/mach-bf561/boards/cm_bf561.c
浏览文件 @ f3f704d3
...@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { ...@@ -105,9 +105,9 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
}; };
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip spi_mmc_chip_info = { static struct bfin5xx_spi_chip mmc_spi_chip_info = {
.enable_dma = 1, .enable_dma = 0,
.bits_per_word = 8, .bits_per_word = 8,
}; };
#endif #endif
...@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { ...@@ -155,14 +155,13 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
.controller_data = &ad9960_spi_chip_info, .controller_data = &ad9960_spi_chip_info,
}, },
#endif #endif
#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
{ {
.modalias = "spi_mmc", .modalias = "mmc_spi",
.max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0, .bus_num = 0,
.chip_select = CONFIG_SPI_MMC_CS_CHAN, .chip_select = 5,
.platform_data = NULL, .controller_data = &mmc_spi_chip_info,
.controller_data = &spi_mmc_chip_info,
.mode = SPI_MODE_3, .mode = SPI_MODE_3,
}, },
#endif #endif
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或