powerpc: Merge time.c and asm/time.h.

We now use the merged time.c for both 32-bit and 64-bit compilation
with ARCH=powerpc, and for ARCH=ppc64, but not for ARCH=ppc32.
This removes setup_default_decr (folds its function into time_init)
and moves wakeup_decrementer into time.c.  This also makes an
asm-powerpc/rtc.h.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

arch/powerpc/kernel/Makefile

@@ -29,7 +29,7 @@ extra-$(CONFIG_PPC64)		+= entry_64.o
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
 extra-y				+= vmlinux.lds
 
-obj-y				+= process.o init_task.o \
+obj-y				+= process.o init_task.o time.o \
 				   prom.o systbl.o traps.o
 obj-$(CONFIG_PPC32)		+= entry_32.o idle_6xx.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= setup_64.o misc_64.o
@@ -44,7 +44,7 @@ endif
 
 else
 # stuff used from here for ARCH=ppc or ARCH=ppc64
-obj-$(CONFIG_PPC64)		+= traps.o process.o init_task.o
+obj-$(CONFIG_PPC64)		+= traps.o process.o init_task.o time.o
 
 fpux-$(CONFIG_PPC32)		+= fpu.o
 extra-$(CONFIG_PPC_FPU)		+= $(fpux-y)

arch/powerpc/kernel/misc_32.S

@@ -35,6 +35,33 @@ _GLOBAL(__delay)
 1:	bdnz	1b
 	blr
 
+/*
+ * This returns the high 64 bits of the product of two 64-bit numbers.
+ */
+_GLOBAL(mulhdu)
+	cmpwi	r6,0
+	cmpwi	cr1,r3,0
+	mr	r10,r4
+	mulhwu	r4,r4,r5
+	beq	1f
+	mulhwu	r0,r10,r6
+	mullw	r7,r10,r5
+	addc	r7,r0,r7
+	addze	r4,r4
+1:	beqlr	cr1		/* all done if high part of A is 0 */
+	mr	r10,r3
+	mullw	r9,r3,r5
+	mulhwu	r3,r3,r5
+	beq	2f
+	mullw	r0,r10,r6
+	mulhwu	r8,r10,r6
+	addc	r7,r0,r7
+	adde	r4,r4,r8
+	addze	r3,r3
+2:	addc	r4,r4,r9
+	addze	r3,r3
+	blr
+
 /*
  * Returns (address we're running at) - (address we were linked at)
  * for use before the text and data are mapped to KERNELBASE.

arch/powerpc/kernel/ppc_ksyms.c

@@ -260,7 +260,6 @@ EXPORT_SYMBOL(__res);
 #ifdef CONFIG_PPC32
 EXPORT_SYMBOL(next_mmu_context);
 EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
 #endif
 
 #ifdef CONFIG_PPC_STD_MMU_32

arch/powerpc/kernel/setup_64.c

@@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
 	printk("[terminate]%04x %s\n", src, msg);
 }
 
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
-	struct paca_struct *lpaca = get_paca();
-
-	lpaca->default_decr = tb_ticks_per_jiffy;
-	lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
 #ifndef CONFIG_PPC_ISERIES
 /*
  * This function can be used by platforms to "find" legacy serial ports.

arch/powerpc/platforms/powermac/cpufreq.c

@@ -110,15 +110,6 @@ static inline void local_delay(unsigned long ms)
 		msleep(ms);
 }
 
-static inline void wakeup_decrementer(void)
-{
-	set_dec(tb_ticks_per_jiffy);
-	/* No currently-supported powerbook has a 601,
-	 * so use get_tbl, not native
-	 */
-	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
 #ifdef DEBUG_FREQ
 static inline void debug_calc_bogomips(void)
 {

arch/powerpc/platforms/powermac/time.c

@@ -6,6 +6,8 @@
  *
  * Paul Mackerras	August 1996.
  * Copyright (C) 1996 Paul Mackerras.
+ * Copyright (C) 2003-2005 Benjamin Herrenschmidt.
+ *
  */
 #include <linux/config.h>
 #include <linux/errno.h>
@@ -19,7 +21,9 @@
 #include <linux/adb.h>
 #include <linux/cuda.h>
 #include <linux/pmu.h>
+#include <linux/interrupt.h>
 #include <linux/hardirq.h>
+#include <linux/rtc.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>
@@ -30,6 +34,14 @@
 #include <asm/time.h>
 #include <asm/nvram.h>
 
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
 /* Apparently the RTC stores seconds since 1 Jan 1904 */
 #define RTC_OFFSET	2082844800
 
@@ -54,10 +66,7 @@
 /* Bits in IFR and IER */
 #define T1_INT		0x40		/* Timer 1 interrupt */
 
-extern struct timezone sys_tz;
-
-long __init
-pmac_time_init(void)
+long __init pmac_time_init(void)
 {
 #ifdef CONFIG_NVRAM
 	s32 delta = 0;
@@ -210,7 +219,7 @@ via_calibrate_decr(void)
 	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
 	tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
 
-	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
+	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %lu (%u ticks)\n",
 	       tb_ticks_per_jiffy, dstart - dend);
 
 	iounmap(via);
@@ -228,6 +237,7 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
 	static unsigned long time_diff;
 	unsigned long flags;
 	unsigned long seq;
+	struct timespec tv;
 
 	switch (when) {
 	case PBOOK_SLEEP_NOW:
@@ -237,11 +247,9 @@ time_sleep_notify(struct pmu_sleep_notifier *self, int when)
 		} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
 		break;
 	case PBOOK_WAKE:
-		write_seqlock_irqsave(&xtime_lock, flags);
-		xtime.tv_sec = pmac_get_rtc_time() + time_diff;
-		xtime.tv_nsec = 0;
-		last_rtc_update = xtime.tv_sec;
-		write_sequnlock_irqrestore(&xtime_lock, flags);
+		tv.tv_sec = pmac_get_boot_time() + time_diff;
+		tv.tv_nsec = 0;
+		do_settimeofday(&tv);
 		break;
 	}
 	return PBOOK_SLEEP_OK;

arch/ppc/kernel/Makefile

@@ -37,7 +37,7 @@ endif
 # These are here while we do the architecture merge
 
 else
-obj-y				:= irq.o idle.o time.o \
+obj-y				:= irq.o idle.o \
 					align.o perfmon.o
 obj-$(CONFIG_6xx)		+= l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)	+= swsusp.o

arch/ppc/kernel/time.c

@@ -121,6 +121,15 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
+void wakeup_decrementer(void)
+{
+	set_dec(tb_ticks_per_jiffy);
+	/* No currently-supported powerbook has a 601,
+	 * so use get_tbl, not native
+	 */
+	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
+}
+
 /*
  * timer_interrupt - gets called when the decrementer overflows,
  * with interrupts disabled.

arch/ppc64/kernel/Makefile

@@ -12,7 +12,7 @@ obj-y               :=	setup.o entry.o misc.o prom.o
 endif
 
 obj-y               +=	irq.o idle.o dma.o \
-			time.o signal.o \
+			signal.o \
 			align.o bitops.o pacaData.o \
 			udbg.o ioctl32.o \
 			rtc.o \

arch/ppc64/kernel/pmac_time.c

@@ -180,7 +180,5 @@ void __init pmac_calibrate_decr(void)
 	if (fp == 0)
 		panic("can't get cpu processor frequency");
 	ppc_proc_freq = *fp;
-
-	setup_default_decr();
 }
 

arch/ppc64/kernel/setup.c

@@ -1083,15 +1083,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
 	printk("[terminate]%04x %s\n", src, msg);
 }
 
-/* This should only be called on processor 0 during calibrate decr */
-void __init setup_default_decr(void)
-{
-	struct paca_struct *lpaca = get_paca();
-
-	lpaca->default_decr = tb_ticks_per_jiffy;
-	lpaca->next_jiffy_update_tb = get_tb() + tb_ticks_per_jiffy;
-}
-
 #ifndef CONFIG_PPC_ISERIES
 /*
  * This function can be used by platforms to "find" legacy serial ports.

drivers/macintosh/via-pmu.c

@@ -588,17 +588,6 @@ pmu_get_model(void)
 	return pmu_kind;
 }
 
-#ifndef CONFIG_PPC64
-static inline void wakeup_decrementer(void)
-{
-	set_dec(tb_ticks_per_jiffy);
-	/* No currently-supported powerbook has a 601,
-	 * so use get_tbl, not native
-	 */
-	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-#endif
-
 static void pmu_set_server_mode(int server_mode)
 {
 	struct adb_request req;

include/asm-powerpc/irq.h

@@ -496,5 +496,7 @@ extern int call_handle_IRQ_event(int irq, struct pt_regs *regs,
 
 #endif /* CONFIG_IRQSTACKS */
 
+extern void do_IRQ(struct pt_regs *regs);
+
 #endif /* _ASM_IRQ_H */
 #endif /* __KERNEL__ */

include/asm-powerpc/rtc.h

+/*
+ * Real-time clock definitions and interfaces
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_POWERPC_RTC_H__
+#define __ASM_POWERPC_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time)
+		ppc_md.get_rtc_time(time);
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time) {
+		ppc_md.set_rtc_time(time);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_RTC_H__ */

include/asm-ppc64/time.h → include/asm-powerpc/time.h

@@ -10,32 +10,36 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#ifndef __PPC64_TIME_H
-#define __PPC64_TIME_H
+#ifndef __POWERPC_TIME_H
+#define __POWERPC_TIME_H
 
 #ifdef __KERNEL__
 #include <linux/config.h>
 #include <linux/types.h>
-#include <linux/mc146818rtc.h>
+#include <linux/percpu.h>
 
 #include <asm/processor.h>
+#ifdef CONFIG_PPC64
 #include <asm/paca.h>
 #include <asm/iSeries/HvCall.h>
+#endif
 
 /* time.c */
 extern unsigned long tb_ticks_per_jiffy;
 extern unsigned long tb_ticks_per_usec;
 extern unsigned long tb_ticks_per_sec;
-extern unsigned long tb_to_xs;
+extern u64 tb_to_xs;
 extern unsigned      tb_to_us;
-extern unsigned long tb_last_stamp;
+extern u64 tb_last_stamp;
+
+DECLARE_PER_CPU(unsigned long, last_jiffy);
 
 struct rtc_time;
 extern void to_tm(int tim, struct rtc_time * tm);
 extern time_t last_rtc_update;
 
-void generic_calibrate_decr(void);
-void setup_default_decr(void);
+extern void generic_calibrate_decr(void);
+extern void wakeup_decrementer(void);
 
 /* Some sane defaults: 125 MHz timebase, 1GHz processor */
 extern unsigned long ppc_proc_freq;
@@ -47,12 +51,12 @@ extern unsigned long ppc_tb_freq;
  * By putting all of this stuff into a single struct we 
  * reduce the number of cache lines touched by do_gettimeofday.
  * Both by collecting all of the data in one cache line and
- * by touching only one TOC entry
+ * by touching only one TOC entry on ppc64.
  */
 struct gettimeofday_vars {
-	unsigned long tb_to_xs;
-	unsigned long stamp_xsec;
-	unsigned long tb_orig_stamp;
+	u64 tb_to_xs;
+	u64 stamp_xsec;
+	u64 tb_orig_stamp;
 };
 
 struct gettimeofday_struct {
@@ -64,25 +68,100 @@ struct gettimeofday_struct {
 };
 
 struct div_result {
-	unsigned long result_high;
-	unsigned long result_low;
+	u64 result_high;
+	u64 result_low;
 };
 
-int via_calibrate_decr(void);
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+#define __USE_RTC()	cpu_has_feature(CPU_FTR_USE_TB)
+#else
+#define __USE_RTC()	0
+#endif
+
+/* On ppc64 this gets us the whole timebase; on ppc32 just the lower half */
+static inline unsigned long get_tbl(void)
+{
+	unsigned long tbl;
+
+#if defined(CONFIG_403GCX)
+	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+#else
+	asm volatile("mftb %0" : "=r" (tbl));
+#endif
+	return tbl;
+}
+
+static inline unsigned int get_tbu(void)
+{
+	unsigned int tbu;
+
+#if defined(CONFIG_403GCX)
+	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
+#else
+	asm volatile("mftbu %0" : "=r" (tbu));
+#endif
+	return tbu;
+}
+
+static inline unsigned int get_rtcl(void)
+{
+	unsigned int rtcl;
+
+	asm volatile("mfrtcl %0" : "=r" (rtcl));
+	return rtcl;
+}
 
-static __inline__ unsigned long get_tb(void)
+#ifdef CONFIG_PPC64
+static inline u64 get_tb(void)
 {
 	return mftb();
 }
+#else
+static inline u64 get_tb(void)
+{
+	unsigned int tbhi, tblo, tbhi2;
+
+	do {
+		tbhi = get_tbu();
+		tblo = get_tbl();
+		tbhi2 = get_tbu();
+	} while (tbhi != tbhi2);
+
+	return ((u64)tbhi << 32) | tblo;
+}
+#endif
 
-/* Accessor functions for the decrementer register. */
-static __inline__ unsigned int get_dec(void)
+static inline void set_tb(unsigned int upper, unsigned int lower)
 {
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, upper);
+	mtspr(SPRN_TBWL, lower);
+}
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer.  I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode.  The problem is PIT stops counting when it
+ * hits zero.  If it would wrap, we could use it just like a decrementer.
+ */
+static inline unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+	return (mfspr(SPRN_PIT));
+#else
 	return (mfspr(SPRN_DEC));
+#endif
 }
 
-static __inline__ void set_dec(int val)
+static inline void set_dec(int val)
 {
+#if defined(CONFIG_40x)
+	return;		/* Have to let it auto-reload */
+#elif defined(CONFIG_8xx_CPU6)
+	set_dec_cpu6(val);
+#else
 #ifdef CONFIG_PPC_ISERIES
 	struct paca_struct *lpaca = get_paca();
 	int cur_dec;
@@ -95,22 +174,31 @@ static __inline__ void set_dec(int val)
 	} else
 #endif
 		mtspr(SPRN_DEC, val);
+#endif /* not 40x or 8xx_CPU6 */
 }
 
 static inline unsigned long tb_ticks_since(unsigned long tstamp)
 {
-	return get_tb() - tstamp;
+	if (__USE_RTC()) {
+		int delta = get_rtcl() - (unsigned int) tstamp;
+		return delta < 0 ? delta + 1000000000 : delta;
+	}
+	return get_tbl() - tstamp;
 }
 
 #define mulhwu(x,y) \
 ({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+#ifdef CONFIG_PPC64
 #define mulhdu(x,y) \
 ({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
+#else
+extern u64 mulhdu(u64, u64);
+#endif
 
 unsigned mulhwu_scale_factor(unsigned, unsigned);
-void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
-		   unsigned divisor, struct div_result *dr );
+void div128_by_32(u64 dividend_high, u64 dividend_low,
+		  unsigned divisor, struct div_result *dr);
 
 /* Used to store Processor Utilization register (purr) values */