ARM: S3C24XX: Add HSSPI setup callback for s3c64xx-spi driver

This lets the s3c64xx-spi driver know the specifics of the controller-
variant and also setups the gpios and the misccr bit.

This setup is valid for all S3C24XX SoCs containing a HSSPI controller
(i.e. S3C2416/2450 and S3C2443)
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NKukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c24xx/Kconfig

@@ -518,6 +518,11 @@ config S3C2443_DMA
 	help
 	  Internal config node for S3C2443 DMA support
 
+config S3C2443_SETUP_SPI
+	bool
+	help
+	  Common setup code for SPI GPIO configurations
+
 endif	# CPU_S3C2443 || CPU_S3C2416
 
 if CPU_S3C2443

arch/arm/mach-s3c24xx/Makefile

@@ -91,5 +91,6 @@ obj-$(CONFIG_MACH_OSIRIS_DVS)		+= mach-osiris-dvs.o
 # device setup
 
 obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
+obj-$(CONFIG_S3C2443_SETUP_SPI)		+= setup-spi.o
 obj-$(CONFIG_ARCH_S3C24XX)		+= setup-i2c.o
 obj-$(CONFIG_S3C24XX_SETUP_TS)		+= setup-ts.o

arch/arm/mach-s3c24xx/setup-spi.c

+/*
+ * HS-SPI device setup for S3C2443/S3C2416
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+	.fifo_lvl_mask	= 0x7f,
+	.rx_lvl_offset	= 13,
+	.tx_st_done	= 21,
+	.high_speed	= 1,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *pdev)
+{
+	/* enable hsspi bit in misccr */
+	s3c2410_modify_misccr(S3C2416_MISCCR_HSSPI_EN2, 1);
+
+	s3c_gpio_cfgall_range(S3C2410_GPE(11), 3,
+			      S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
+	return 0;
+}
+#endif