Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: move input-polldev to drivers/input
  Input: i8042 - add ULI EV4873 to noloop list
  Input: i8042 - add ASUS P65UP5 to the noloop list
  Input: usbtouchscreen - fix fallout caused by move from drivers/usb

drivers/input/Kconfig

@@ -39,6 +39,19 @@ config INPUT_FF_MEMLESS
 	  To compile this driver as a module, choose M here: the
 	  module will be called ff-memless.
 
+config INPUT_POLLDEV
+	tristate "Polled input device skeleton"
+	help
+	  Say Y here if you are using a driver for an input
+	  device that periodically polls hardware state. This
+	  option is only useful for out-of-tree drivers since
+	  in-tree drivers select it automatically.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called input-polldev.
+
 comment "Userland interfaces"
 
 config INPUT_MOUSEDEV

drivers/input/Makefile

@@ -8,6 +8,7 @@ obj-$(CONFIG_INPUT)		+= input-core.o
 input-core-objs := input.o ff-core.o
 
 obj-$(CONFIG_INPUT_FF_MEMLESS)	+= ff-memless.o
+obj-$(CONFIG_INPUT_POLLDEV)	+= input-polldev.o
 
 obj-$(CONFIG_INPUT_MOUSEDEV)	+= mousedev.o
 obj-$(CONFIG_INPUT_JOYDEV)	+= joydev.o

drivers/input/misc/Kconfig

@@ -170,17 +170,6 @@ config INPUT_UINPUT
 	  To compile this driver as a module, choose M here: the
 	  module will be called uinput.
 
-config INPUT_POLLDEV
-	tristate "Polled input device skeleton"
-	help
-	  Say Y here if you are using a driver for an input
-	  device that periodically polls hardware state. This
-	  option is only useful for out-of-tree drivers since
-	  in-tree drivers select it automatically.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called input-polldev.
-
 config HP_SDC_RTC
 	tristate "HP SDC Real Time Clock"
 	depends on GSC || HP300

drivers/input/misc/Makefile

@@ -4,7 +4,6 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_INPUT_POLLDEV)		+= input-polldev.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_PCSPKR)		+= pcspkr.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o

drivers/input/serio/i8042-x86ia64io.h

@@ -68,6 +68,15 @@ static inline void i8042_write_command(int val)
 #include <linux/dmi.h>
 
 static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
+	{
+		/* AUX LOOP command does not raise AUX IRQ */
+		.ident = "ASUS P65UP5",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P/I-P65UP5"),
+			DMI_MATCH(DMI_BOARD_VERSION, "REV 2.X"),
+		},
+	},
 	{
 		.ident = "Compaq Proliant 8500",
 		.matches = {
@@ -92,6 +101,15 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = {
 			DMI_MATCH(DMI_PRODUCT_VERSION, "00"),
 		},
 	},
+	{
+		/* AUX LOOP does not work properly */
+		.ident = "ULI EV4873",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ULI"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EV4873"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "5a"),
+		},
+	},
 	{ }
 };
 

drivers/input/touchscreen/usbtouchscreen.c

@@ -91,7 +91,7 @@ struct usbtouch_usb {
 };
 
 
-#if defined(CONFIG_USB_TOUCHSCREEN_EGALAX) || defined(CONFIG_USB_TOUCHSCREEN_ETURBO)
+#if defined(CONFIG_TOUCHSCREEN_USB_EGALAX) || defined(CONFIG_TOUCHSCREEN_USB_ETURBO)
 #define MULTI_PACKET
 #endif
 
@@ -113,7 +113,7 @@ enum {
 };
 
 static struct usb_device_id usbtouch_devices[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
 	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
 	{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
 	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
@@ -123,30 +123,30 @@ static struct usb_device_id usbtouch_devices[] = {
 	{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
 	{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
 	{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
 	{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
 	{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
 	{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
 	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
 	{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
 	{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
 	{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
 #endif
 
@@ -158,7 +158,7 @@ static struct usb_device_id usbtouch_devices[] = {
  * eGalax part
  */
 
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
 
 #define EGALAX_PKT_TYPE_MASK		0xFE
 #define EGALAX_PKT_TYPE_REPT		0x80
@@ -197,7 +197,7 @@ static int egalax_get_pkt_len(unsigned char *buf, int len)
 /*****************************************************************************
  * PanJit Part
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
 static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
@@ -212,7 +212,7 @@ static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 /*****************************************************************************
  * 3M/Microtouch Part
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
 
 #define MTOUCHUSB_ASYNC_REPORT          1
 #define MTOUCHUSB_RESET                 7
@@ -262,7 +262,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 /*****************************************************************************
  * ITM Part
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
 static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	int touch;
@@ -296,7 +296,7 @@ static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 /*****************************************************************************
  * eTurboTouch part
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
 static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	unsigned int shift;
@@ -327,7 +327,7 @@ static int eturbo_get_pkt_len(unsigned char *buf, int len)
 /*****************************************************************************
  * Gunze part
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
 static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
@@ -348,7 +348,7 @@ static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
  *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
  *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
  */
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
 
 /* supported data rates. currently using 130 */
 #define TSC10_RATE_POINT	0x50
@@ -419,7 +419,7 @@ static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
  * the different device descriptors
  */
 static struct usbtouch_device_info usbtouch_dev_info[] = {
-#ifdef CONFIG_USB_TOUCHSCREEN_EGALAX
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
 	[DEVTYPE_EGALAX] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x07ff,
@@ -433,7 +433,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
 	[DEVTYPE_PANJIT] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x0fff,
@@ -444,7 +444,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_3M
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
 	[DEVTYPE_3M] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x4000,
@@ -456,7 +456,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_ITM
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
 	[DEVTYPE_ITM] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x0fff,
@@ -468,7 +468,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
 	[DEVTYPE_ETURBO] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x07ff,
@@ -482,7 +482,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
 	[DEVTYPE_GUNZE] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x0fff,
@@ -493,7 +493,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 	},
 #endif
 
-#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
 	[DEVTYPE_DMC_TSC10] = {
 		.min_xc		= 0x0,
 		.max_xc		= 0x03ff,