Merge branch 'master' into next

Conflicts:
	security/Kconfig

Manual fix.
Signed-off-by: NJames Morris <jmorris@namei.org>

Documentation/filesystems/afs.txt

@@ -23,15 +23,13 @@ it does support include:
 
  (*) Security (currently only AFS kaserver and KerberosIV tickets).
 
- (*) File reading.
+ (*) File reading and writing.
 
  (*) Automounting.
 
-It does not yet support the following AFS features:
-
- (*) Write support.
+ (*) Local caching (via fscache).
 
- (*) Local caching.
+It does not yet support the following AFS features:
 
  (*) pioctl() system call.
 
@@ -56,7 +54,7 @@ They permit the debugging messages to be turned on dynamically by manipulating
 the masks in the following files:
 
 	/sys/module/af_rxrpc/parameters/debug
-	/sys/module/afs/parameters/debug
+	/sys/module/kafs/parameters/debug
 
 
 =====
@@ -66,9 +64,9 @@ USAGE
 When inserting the driver modules the root cell must be specified along with a
 list of volume location server IP addresses:
 
-	insmod af_rxrpc.o
-	insmod rxkad.o
-	insmod kafs.o rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
+	modprobe af_rxrpc
+	modprobe rxkad
+	modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91
 
 The first module is the AF_RXRPC network protocol driver.  This provides the
 RxRPC remote operation protocol and may also be accessed from userspace.  See:
@@ -81,7 +79,7 @@ is the actual filesystem driver for the AFS filesystem.
 Once the module has been loaded, more modules can be added by the following
 procedure:
 
-	echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+	echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
 
 Where the parameters to the "add" command are the name of a cell and a list of
 volume location servers within that cell, with the latter separated by colons.
@@ -101,7 +99,7 @@ The name of the volume can be suffixes with ".backup" or ".readonly" to
 specify connection to only volumes of those types.
 
 The name of the cell is optional, and if not given during a mount, then the
-named volume will be looked up in the cell specified during insmod.
+named volume will be looked up in the cell specified during modprobe.
 
 Additional cells can be added through /proc (see later section).
 
@@ -163,14 +161,14 @@ THE CELL DATABASE
 
 The filesystem maintains an internal database of all the cells it knows and the
 IP addresses of the volume location servers for those cells.  The cell to which
-the system belongs is added to the database when insmod is performed by the
+the system belongs is added to the database when modprobe is performed by the
 "rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on
 the kernel command line.
 
 Further cells can be added by commands similar to the following:
 
 	echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells
-	echo add grand.central.org 18.7.14.88:128.2.191.224 >/proc/fs/afs/cells
+	echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells
 
 No other cell database operations are available at this time.
 
@@ -233,7 +231,7 @@ insmod /tmp/kafs.o rootcell=cambridge.redhat.com:172.16.18.91
 mount -t afs \%root.afs. /afs
 mount -t afs \%cambridge.redhat.com:root.cell. /afs/cambridge.redhat.com/
 
-echo add grand.central.org 18.7.14.88:128.2.191.224 > /proc/fs/afs/cells
+echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 > /proc/fs/afs/cells
 mount -t afs "#grand.central.org:root.cell." /afs/grand.central.org/
 mount -t afs "#grand.central.org:root.archive." /afs/grand.central.org/archive
 mount -t afs "#grand.central.org:root.contrib." /afs/grand.central.org/contrib

Documentation/filesystems/proc.txt

@@ -1167,13 +1167,11 @@ CHAPTER 3: PER-PROCESS PARAMETERS
 3.1 /proc/<pid>/oom_adj - Adjust the oom-killer score
 ------------------------------------------------------
 
-This file can be used to adjust the score used to select which processes should
-be killed in an out-of-memory situation.  The oom_adj value is a characteristic
-of the task's mm, so all threads that share an mm with pid will have the same
-oom_adj value.  A high value will increase the likelihood of this process being
-killed by the oom-killer.  Valid values are in the range -16 to +15 as
-explained below and a special value of -17, which disables oom-killing
-altogether for threads sharing pid's mm.
+This file can be used to adjust the score used to select which processes
+should be killed in an  out-of-memory  situation.  Giving it a high score will
+increase the likelihood of this process being killed by the oom-killer.  Valid
+values are in the range -16 to +15, plus the special value -17, which disables
+oom-killing altogether for this process.
 
 The process to be killed in an out-of-memory situation is selected among all others
 based on its badness score. This value equals the original memory size of the process
@@ -1187,9 +1185,6 @@ the parent's score if they do not share the same memory. Thus forking servers
 are the prime candidates to be killed. Having only one 'hungry' child will make
 parent less preferable than the child.
 
-/proc/<pid>/oom_adj cannot be changed for kthreads since they are immune from
-oom-killing already.
-
 /proc/<pid>/oom_score shows process' current badness score.
 
 The following heuristics are then applied:

Documentation/kernel-parameters.txt

@@ -1115,6 +1115,10 @@ and is between 256 and 4096 characters. It is defined in the file
 			libata.dma=4	  Compact Flash DMA only 
 			Combinations also work, so libata.dma=3 enables DMA
 			for disks and CDROMs, but not CFs.
+	
+	libata.ignore_hpa=	[LIBATA] Ignore HPA limit
+			libata.ignore_hpa=0	  keep BIOS limits (default)
+			libata.ignore_hpa=1	  ignore limits, using full disk
 
 	libata.noacpi	[LIBATA] Disables use of ACPI in libata suspend/resume
 			when set.

Documentation/video4linux/CARDLIST.em28xx

   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2710,eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]

Documentation/video4linux/CARDLIST.saa7134

@@ -153,8 +153,8 @@
 152 -> Asus Tiger Rev:1.00                      [1043:4857]
 153 -> Kworld Plus TV Analog Lite PCI           [17de:7128]
 154 -> Avermedia AVerTV GO 007 FM Plus          [1461:f31d]
-155 -> Hauppauge WinTV-HVR1120 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
-156 -> Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid   [0070:6707,0070:6709,0070:670a]
+155 -> Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid  [0070:6706,0070:6708]
+156 -> Hauppauge WinTV-HVR1120 DVB-T/Hybrid     [0070:6707,0070:6709,0070:670a]
 157 -> Avermedia AVerTV Studio 507UA            [1461:a11b]
 158 -> AVerMedia Cardbus TV/Radio (E501R)       [1461:b7e9]
 159 -> Beholder BeholdTV 505 RDS                [0000:505B]

MAINTAINERS

@@ -904,7 +904,7 @@ F:	drivers/input/misc/ati_remote2.c
 
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
-M:	Chris Snook <csnook@redhat.com>
+M:	Chris Snook <chris.snook@gmail.com>
 M:	Jie Yang <jie.yang@atheros.com>
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
@@ -2238,6 +2238,14 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/pac207.c
 
+GSPCA SN9C20X SUBDRIVER
+P:	Brian Johnson
+M:	brijohn@gmail.com
+L:	linux-media@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
+S:	Maintained
+F:	drivers/media/video/gspca/sn9c20x.c
+
 GSPCA T613 SUBDRIVER
 M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
@@ -3421,6 +3429,7 @@ F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
 S:	Orphan
+L:	linux-mmc@vger.kernel.org
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
@@ -3555,6 +3564,9 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/
+F:	include/linux/in.h
+F:	include/linux/net.h
+F:	include/linux/netdevice.h
 
 NETWORKING [IPv4/IPv6]
 M:	"David S. Miller" <davem@davemloft.net>
@@ -3590,6 +3602,8 @@ W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Odd Fixes
 F:	drivers/net/
+F:	include/linux/if_*
+F:	include/linux/*device.h
 
 NETXEN (1/10) GbE SUPPORT
 M:	Dhananjay Phadke <dhananjay@netxen.com>
@@ -3796,7 +3810,7 @@ W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
 S:	Maintained
 F:	drivers/scsi/osd/
-F:	drivers/include/scsi/osd_*
+F:	include/scsi/osd_*
 F:	fs/exofs/
 
 P54 WIRELESS DRIVER

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

REPORTING-BUGS

@@ -15,7 +15,10 @@ worry too much about getting the wrong person. If you are unsure send it
 to the person responsible for the code relevant to what you were doing.
 If it occurs repeatably try and describe how to recreate it. That is
 worth even more than the oops itself.  The list of maintainers and
-mailing lists is in the MAINTAINERS file in this directory.
+mailing lists is in the MAINTAINERS file in this directory.  If you
+know the file name that causes the problem you can use the following
+command in this directory to find some of the maintainers of that file:
+     perl scripts/get_maintainer.pl -f <filename>
 
       If it is a security bug, please copy the Security Contact listed
 in the MAINTAINERS file.  They can help coordinate bugfix and disclosure.

arch/arm/configs/rx51_defconfig

@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -1354,7 +1354,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
-CONFIG_MMC=m
+CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 # CONFIG_MMC_UNSAFE_RESUME is not set
 
@@ -1449,7 +1449,8 @@ CONFIG_RTC_DRV_TWL4030=m
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
-# CONFIG_REGULATOR is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_TWL4030=y
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 

arch/arm/include/asm/setup.h

@@ -201,7 +201,8 @@ static struct tagtable __tagtable_##fn __tag = { tag, fn }
 struct membank {
 	unsigned long start;
 	unsigned long size;
-	int           node;
+	unsigned short node;
+	unsigned short highmem;
 };
 
 struct meminfo {

arch/arm/mach-ixp4xx/include/mach/io.h

@@ -17,7 +17,7 @@
 
 #include <mach/hardware.h>
 
-#define IO_SPACE_LIMIT 0xffff0000
+#define IO_SPACE_LIMIT 0x0000ffff
 
 extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
 extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -63,7 +63,7 @@ static struct imxuart_platform_data uart_pdata = {
 
 static int devboard_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -67,7 +67,7 @@ static unsigned int marxbot_pins[] = {
 
 static int marxbot_sdhc2_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC2_WP);
+	return !gpio_get_value(SDHC2_WP);
 }
 
 static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,

arch/arm/mach-mx3/mx31moboard.c

@@ -94,7 +94,7 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 
 static int moboard_sdhc1_get_ro(struct device *dev)
 {
-	return gpio_get_value(SDHC1_WP);
+	return !gpio_get_value(SDHC1_WP);
 }
 
 static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,

arch/arm/mach-mx3/pcm037_eet.c

@@ -24,15 +24,6 @@
 #include "devices.h"
 
 static unsigned int pcm037_eet_pins[] = {
-	/* SPI #1 */
-	MX31_PIN_CSPI1_MISO__MISO,
-	MX31_PIN_CSPI1_MOSI__MOSI,
-	MX31_PIN_CSPI1_SCLK__SCLK,
-	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
-	MX31_PIN_CSPI1_SS0__SS0,
-	MX31_PIN_CSPI1_SS1__SS1,
-	MX31_PIN_CSPI1_SS2__SS2,
-
 	/* Reserve and hardwire GPIO 57 high - S6E63D6 chipselect */
 	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_GPIO),
 	/* GPIO keys */

arch/arm/mach-omap2/board-2430sdp.c

@@ -141,7 +141,7 @@ static inline void board_smc91x_init(void)
 
 static void __init omap_2430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }

arch/arm/mach-omap2/board-3430sdp.c

@@ -169,7 +169,7 @@ static struct platform_device *sdp3430_devices[] __initdata = {
 
 static void __init omap_3430sdp_init_irq(void)
 {
-	omap2_init_common_hw(hyb18m512160af6_sdrc_params);
+	omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }

arch/arm/mach-omap2/board-4430sdp.c

@@ -59,7 +59,7 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
 #endif

arch/arm/mach-omap2/board-apollon.c

@@ -250,7 +250,7 @@ static inline void __init apollon_init_smc91x(void)
 
 static void __init omap_apollon_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	apollon_init_smc91x();

arch/arm/mach-omap2/board-generic.c

@@ -33,7 +33,7 @@
 
 static void __init omap_generic_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 }
 

arch/arm/mach-omap2/board-h4.c

@@ -270,7 +270,7 @@ static void __init h4_init_flash(void)
 
 static void __init omap_h4_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	h4_init_flash();

arch/arm/mach-omap2/board-ldp.c

@@ -270,7 +270,7 @@ static inline void __init ldp_init_smsc911x(void)
 
 static void __init omap_ldp_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	ldp_init_smsc911x();

arch/arm/mach-omap2/board-omap3beagle.c

@@ -282,7 +282,8 @@ static int __init omap3_beagle_i2c_init(void)
 
 static void __init omap3_beagle_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(12);
@@ -408,6 +409,10 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init();
 	omap3beagle_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3_beagle_map_io(void)

arch/arm/mach-omap2/board-omap3evm.c

@@ -280,7 +280,7 @@ struct spi_board_info omap3evm_spi_board_info[] = {
 
 static void __init omap3_evm_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 	omap3evm_init_smc911x();

arch/arm/mach-omap2/board-omap3pandora.c

@@ -40,6 +40,7 @@
 #include <mach/mcspi.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
+#include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
@@ -310,7 +311,8 @@ static int __init omap3pandora_i2c_init(void)
 
 static void __init omap3pandora_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -397,6 +399,10 @@ static void __init omap3pandora_init(void)
 	omap3pandora_ads7846_init();
 	pandora_keys_gpio_init();
 	usb_musb_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init omap3pandora_map_io(void)

arch/arm/mach-omap2/board-overo.c

@@ -44,6 +44,7 @@
 #include <mach/gpmc.h>
 #include <mach/hardware.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 #include <mach/usb.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
@@ -51,6 +52,7 @@
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
 #define OVERO_GPIO_BT_NRESET	164
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
@@ -146,7 +148,7 @@ static struct platform_device overo_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(overo_smsc911x_resources),
-	.resource	= &overo_smsc911x_resources,
+	.resource	= overo_smsc911x_resources,
 	.dev		= {
 		.platform_data = &overo_smsc911x_config,
 	},
@@ -360,7 +362,8 @@ static int __init overo_i2c_init(void)
 
 static void __init overo_init_irq(void)
 {
-	omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -395,6 +398,10 @@ static void __init overo_init(void)
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
 	    (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -278,6 +278,10 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = {
 	.setup			= rx51_twlgpio_setup,
 };
 
+static struct twl4030_usb_data rx51_usb_data = {
+	.usb_mode		= T2_USB_MODE_ULPI,
+};
+
 static struct twl4030_platform_data rx51_twldata = {
 	.irq_base		= TWL4030_IRQ_BASE,
 	.irq_end		= TWL4030_IRQ_END,
@@ -286,6 +290,7 @@ static struct twl4030_platform_data rx51_twldata = {
 	.gpio			= &rx51_gpio_data,
 	.keypad			= &rx51_kp_data,
 	.madc			= &rx51_madc_data,
+	.usb			= &rx51_usb_data,
 
 	.vaux1			= &rx51_vaux1,
 	.vaux2			= &rx51_vaux2,

arch/arm/mach-omap2/board-rx51.c

@@ -61,7 +61,7 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }
@@ -75,6 +75,10 @@ static void __init rx51_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_cfg_reg(H16_34XX_SDRC_CKE0);
+	omap_cfg_reg(H17_34XX_SDRC_CKE1);
 }
 
 static void __init rx51_map_io(void)

arch/arm/mach-omap2/board-zoom2.c

@@ -25,7 +25,7 @@
 
 static void __init omap_zoom2_init_irq(void)
 {
-	omap2_init_common_hw(NULL);
+	omap2_init_common_hw(NULL, NULL);
 	omap_init_irq();
 	omap_gpio_init();
 }

arch/arm/mach-omap2/clock.c

@@ -27,6 +27,7 @@
 #include <mach/clock.h>
 #include <mach/clockdomain.h>
 #include <mach/cpu.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 
 #include <mach/sdrc.h>
@@ -38,8 +39,6 @@
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
 
-#define MAX_CLOCK_ENABLE_WAIT		100000
-
 /* DPLL rate rounding: minimum DPLL multiplier, divider values */
 #define DPLL_MIN_MULTIPLIER		1
 #define DPLL_MIN_DIVIDER		1
@@ -274,83 +273,97 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk)
 }
 
 /**
- * omap2_wait_clock_ready - wait for clock to enable
- * @reg: physical address of clock IDLEST register
- * @mask: value to mask against to determine if the clock is active
- * @name: name of the clock (for printk)
+ * omap2_clk_dflt_find_companion - find companion clock to @clk
+ * @clk: struct clk * to find the companion clock of
+ * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in
+ * @other_bit: u8 ** to return the companion clock bit shift in
+ *
+ * Note: We don't need special code here for INVERT_ENABLE for the
+ * time being since INVERT_ENABLE only applies to clocks enabled by
+ * CM_CLKEN_PLL
  *
- * Returns 1 if the clock enabled in time, or 0 if it failed to enable
- * in roughly MAX_CLOCK_ENABLE_WAIT microseconds.
+ * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes it's
+ * just a matter of XORing the bits.
+ *
+ * Some clocks don't have companion clocks.  For example, modules with
+ * only an interface clock (such as MAILBOXES) don't have a companion
+ * clock.  Right now, this code relies on the hardware exporting a bit
+ * in the correct companion register that indicates that the
+ * nonexistent 'companion clock' is active.  Future patches will
+ * associate this type of code with per-module data structures to
+ * avoid this issue, and remove the casts.  No return value.
  */
-int omap2_wait_clock_ready(void __iomem *reg, u32 mask, const char *name)
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit)
 {
-	int i = 0;
-	int ena = 0;
+	u32 r;
 
 	/*
-	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
-	 * 34xx reverses this, just to keep us on our toes
+	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
+	 * it's just a matter of XORing the bits.
 	 */
-	if (cpu_mask & (RATE_IN_242X | RATE_IN_243X))
-		ena = mask;
-	else if (cpu_mask & RATE_IN_343X)
-		ena = 0;
-
-	/* Wait for lock */
-	while (((__raw_readl(reg) & mask) != ena) &&
-	       (i++ < MAX_CLOCK_ENABLE_WAIT)) {
-		udelay(1);
-	}
-
-	if (i <= MAX_CLOCK_ENABLE_WAIT)
-		pr_debug("Clock %s stable after %d loops\n", name, i);
-	else
-		printk(KERN_ERR "Clock %s didn't enable in %d tries\n",
-		       name, MAX_CLOCK_ENABLE_WAIT);
-
-
-	return (i < MAX_CLOCK_ENABLE_WAIT) ? 1 : 0;
-};
+	r = ((__force u32)clk->enable_reg ^ (CM_FCLKEN ^ CM_ICLKEN));
 
+	*other_reg = (__force void __iomem *)r;
+	*other_bit = clk->enable_bit;
+}
 
-/*
- * Note: We don't need special code here for INVERT_ENABLE
- * for the time being since INVERT_ENABLE only applies to clocks enabled by
- * CM_CLKEN_PLL
+/**
+ * omap2_clk_dflt_find_idlest - find CM_IDLEST reg va, bit shift for @clk
+ * @clk: struct clk * to find IDLEST info for
+ * @idlest_reg: void __iomem ** to return the CM_IDLEST va in
+ * @idlest_bit: u8 ** to return the CM_IDLEST bit shift in
+ *
+ * Return the CM_IDLEST register address and bit shift corresponding
+ * to the module that "owns" this clock.  This default code assumes
+ * that the CM_IDLEST bit shift is the CM_*CLKEN bit shift, and that
+ * the IDLEST register address ID corresponds to the CM_*CLKEN
+ * register address ID (e.g., that CM_FCLKEN2 corresponds to
+ * CM_IDLEST2).  This is not true for all modules.  No return value.
  */
-static void omap2_clk_wait_ready(struct clk *clk)
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit)
 {
-	void __iomem *reg, *other_reg, *st_reg;
-	u32 bit;
+	u32 r;
 
-	/*
-	 * REVISIT: This code is pretty ugly.  It would be nice to generalize
-	 * it and pull it into struct clk itself somehow.
-	 */
-	reg = clk->enable_reg;
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = clk->enable_bit;
+}
 
-	/*
-	 * Convert CM_ICLKEN* <-> CM_FCLKEN*.  This conversion assumes
-	 * it's just a matter of XORing the bits.
-	 */
-	other_reg = (void __iomem *)((u32)reg ^ (CM_FCLKEN ^ CM_ICLKEN));
+/**
+ * omap2_module_wait_ready - wait for an OMAP module to leave IDLE
+ * @clk: struct clk * belonging to the module
+ *
+ * If the necessary clocks for the OMAP hardware IP block that
+ * corresponds to clock @clk are enabled, then wait for the module to
+ * indicate readiness (i.e., to leave IDLE).  This code does not
+ * belong in the clock code and will be moved in the medium term to
+ * module-dependent code.  No return value.
+ */
+static void omap2_module_wait_ready(struct clk *clk)
+{
+	void __iomem *companion_reg, *idlest_reg;
+	u8 other_bit, idlest_bit;
+
+	/* Not all modules have multiple clocks that their IDLEST depends on */
+	if (clk->ops->find_companion) {
+		clk->ops->find_companion(clk, &companion_reg, &other_bit);
+		if (!(__raw_readl(companion_reg) & (1 << other_bit)))
+			return;
+	}
 
-	/* Check if both functional and interface clocks
-	 * are running. */
-	bit = 1 << clk->enable_bit;
-	if (!(__raw_readl(other_reg) & bit))
-		return;
-	st_reg = (void __iomem *)(((u32)other_reg & ~0xf0) | 0x20); /* CM_IDLEST* */
+	clk->ops->find_idlest(clk, &idlest_reg, &idlest_bit);
 
-	omap2_wait_clock_ready(st_reg, bit, clk->name);
+	omap2_cm_wait_idlest(idlest_reg, (1 << idlest_bit), clk->name);
 }
 
-static int omap2_dflt_clk_enable(struct clk *clk)
+int omap2_dflt_clk_enable(struct clk *clk)
 {
 	u32 v;
 
 	if (unlikely(clk->enable_reg == NULL)) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
+		pr_err("clock.c: Enable for %s without enable code\n",
 		       clk->name);
 		return 0; /* REVISIT: -EINVAL */
 	}
@@ -363,26 +376,13 @@ static int omap2_dflt_clk_enable(struct clk *clk)
 	__raw_writel(v, clk->enable_reg);
 	v = __raw_readl(clk->enable_reg); /* OCP barrier */
 
-	return 0;
-}
+	if (clk->ops->find_idlest)
+		omap2_module_wait_ready(clk);
 
-static int omap2_dflt_clk_enable_wait(struct clk *clk)
-{
-	int ret;
-
-	if (!clk->enable_reg) {
-		printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
-		       clk->name);
-		return 0; /* REVISIT: -EINVAL */
-	}
-
-	ret = omap2_dflt_clk_enable(clk);
-	if (ret == 0)
-		omap2_clk_wait_ready(clk);
-	return ret;
+	return 0;
 }
 
-static void omap2_dflt_clk_disable(struct clk *clk)
+void omap2_dflt_clk_disable(struct clk *clk)
 {
 	u32 v;
 
@@ -406,8 +406,10 @@ static void omap2_dflt_clk_disable(struct clk *clk)
 }
 
 const struct clkops clkops_omap2_dflt_wait = {
-	.enable		= omap2_dflt_clk_enable_wait,
+	.enable		= omap2_dflt_clk_enable,
 	.disable	= omap2_dflt_clk_disable,
+	.find_companion	= omap2_clk_dflt_find_companion,
+	.find_idlest	= omap2_clk_dflt_find_idlest,
 };
 
 const struct clkops clkops_omap2_dflt = {

arch/arm/mach-omap2/clock.h

@@ -65,6 +65,12 @@ int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
+int omap2_dflt_clk_enable(struct clk *clk);
+void omap2_dflt_clk_disable(struct clk *clk);
+void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
+				   u8 *other_bit);
+void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
+				u8 *idlest_bit);
 
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;

arch/arm/mach-omap2/clock24xx.c

@@ -30,6 +30,7 @@
 
 #include <mach/clock.h>
 #include <mach/sram.h>
+#include <mach/prcm.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
@@ -43,6 +44,18 @@
 static const struct clkops clkops_oscck;
 static const struct clkops clkops_fixed;
 
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit);
+
+/* 2430 I2CHS has non-standard IDLEST register */
+static const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock24xx.h"
 
 struct omap_clk {
@@ -239,6 +252,26 @@ static void __iomem *prcm_clksrc_ctrl;
  * Omap24xx specific clock functions
  *-------------------------------------------------------------------------*/
 
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit)
+{
+	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+}
+
+
 /**
  * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
  * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
@@ -325,8 +358,8 @@ static int omap2_clk_fixed_enable(struct clk *clk)
 	else if (clk == &apll54_ck)
 		cval = OMAP24XX_ST_54M_APLL;
 
-	omap2_wait_clock_ready(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
-			    clk->name);
+	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
+			     clk->name);
 
 	/*
 	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()

arch/arm/mach-omap2/clock24xx.h

@@ -2337,7 +2337,7 @@ static struct clk i2c2_fck = {
 
 static struct clk i2chs2_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 2,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",
@@ -2370,7 +2370,7 @@ static struct clk i2c1_fck = {
 
 static struct clk i2chs1_fck = {
 	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2430_i2chs_wait,
 	.id		= 1,
 	.parent		= &func_96m_ck,
 	.clkdm_name	= "core_l4_clkdm",

arch/arm/mach-omap2/clock34xx.c

@@ -2,7 +2,7 @@
  * OMAP3-specific clock framework functions
  *
  * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  * Testing and integration fixes by Jouni Högander
@@ -41,6 +41,37 @@
 
 static const struct clkops clkops_noncore_dpll_ops;
 
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit);
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit);
+
+static const struct clkops clkops_omap3430es2_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 #include "clock34xx.h"
 
 struct omap_clk {
@@ -157,10 +188,13 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
 	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
 	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck,	CK_343X),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
 	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
 	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
 	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
@@ -193,18 +227,21 @@ static struct omap_clk omap34xx_clks[] = {
 	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
 	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
 	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
 	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
 	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
 	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
 	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
 	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck, CK_343X),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
 	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
 	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
 	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick,	CK_343X),
+	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
 	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
 	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
 	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
@@ -300,6 +337,73 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define SDRC_MPURATE_LOOPS		96
 
+/**
+ * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 SSI target CM_IDLEST bit is at a different shift
+ * from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
+					    void __iomem **idlest_reg,
+					    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * Some OMAP modules on OMAP3 ES2+ chips have both initiator and
+ * target IDLEST bits.  For our purposes, we are concerned with the
+ * target IDLEST bits, which exist at a different bit position than
+ * the *CLKEN bit position for these modules (DSS and USBHOST) (The
+ * default find_idlest code assumes that they are at the same
+ * position.)  No return value.
+ */
+static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
+						    void __iomem **idlest_reg,
+						    u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	/* USBHOST_IDLE has same shift */
+	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
+}
+
+/**
+ * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * The OMAP3430ES2 HSOTGUSB target CM_IDLEST bit is at a different
+ * shift from the CM_{I,F}CLKEN bit.  Pass back the correct info via
+ * @idlest_reg and @idlest_bit.  No return value.
+ */
+static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
+						 void __iomem **idlest_reg,
+						 u8 *idlest_bit)
+{
+	u32 r;
+
+	r = (((__force u32)clk->enable_reg & ~0xf0) | 0x20);
+	*idlest_reg = (__force void __iomem *)r;
+	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
+}
+
 /**
  * omap3_dpll_recalc - recalculate DPLL rate
  * @clk: DPLL struct clk
@@ -725,7 +829,9 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	u32 unlock_dll = 0;
 	u32 c;
 	unsigned long validrate, sdrcrate, mpurate;
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sdrc_cs0;
+	struct omap_sdrc_params *sdrc_cs1;
+	int ret;
 
 	if (!clk || !rate)
 		return -EINVAL;
@@ -743,8 +849,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	else
 		sdrcrate >>= ((clk->rate / rate) >> 1);
 
-	sp = omap2_sdrc_get_params(sdrcrate);
-	if (!sp)
+	ret = omap2_sdrc_get_params(sdrcrate, &sdrc_cs0, &sdrc_cs1);
+	if (ret)
 		return -EINVAL;
 
 	if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
@@ -765,12 +871,29 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 
 	pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
 		 validrate);
-	pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
-		 sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
-
-	omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
-				  sp->actim_ctrlb, new_div, unlock_dll, c,
-				  sp->mr, rate > clk->rate);
+	pr_debug("clock: SDRC CS0 timing params used:"
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+		 sdrc_cs0->actim_ctrlb, sdrc_cs0->mr);
+	if (sdrc_cs1)
+		pr_debug("clock: SDRC CS1 timing params used: "
+		 " RFR %08x CTRLA %08x CTRLB %08x MR %08x\n",
+		 sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+		 sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+
+	if (sdrc_cs1)
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  sdrc_cs1->rfr_ctrl, sdrc_cs1->actim_ctrla,
+				  sdrc_cs1->actim_ctrlb, sdrc_cs1->mr);
+	else
+		omap3_configure_core_dpll(
+				  new_div, unlock_dll, c, rate > clk->rate,
+				  sdrc_cs0->rfr_ctrl, sdrc_cs0->actim_ctrla,
+				  sdrc_cs0->actim_ctrlb, sdrc_cs0->mr,
+				  0, 0, 0, 0);
 
 	return 0;
 }

arch/arm/mach-omap2/clock34xx.h

@@ -1568,7 +1568,7 @@ static const struct clksel ssi_ssr_clksel[] = {
 	{ .parent = NULL }
 };
 
-static struct clk ssi_ssr_fck = {
+static struct clk ssi_ssr_fck_3430es1 = {
 	.name		= "ssi_ssr_fck",
 	.ops		= &clkops_omap2_dflt,
 	.init		= &omap2_init_clksel_parent,
@@ -1581,10 +1581,31 @@ static struct clk ssi_ssr_fck = {
 	.recalc		= &omap2_clksel_recalc,
 };
 
-static struct clk ssi_sst_fck = {
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
 	.name		= "ssi_sst_fck",
 	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
 	.fixed_div	= 2,
 	.recalc		= &omap2_fixed_divisor_recalc,
 };
@@ -1606,9 +1627,19 @@ static struct clk core_l3_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk hsotgusb_ick = {
+static struct clk hsotgusb_ick_3430es1 = {
 	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
 	.parent		= &core_l3_ick,
 	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
 	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
@@ -1947,7 +1978,7 @@ static struct clk ssi_l4_ick = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk ssi_ick = {
+static struct clk ssi_ick_3430es1 = {
 	.name		= "ssi_ick",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &ssi_l4_ick,
@@ -1957,6 +1988,16 @@ static struct clk ssi_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* REVISIT: Technically the TRM claims that this is CORE_CLK based,
  * but l4_ick makes more sense to me */
 
@@ -2024,7 +2065,7 @@ static struct clk des1_ick = {
 };
 
 /* DSS */
-static struct clk dss1_alwon_fck = {
+static struct clk dss1_alwon_fck_3430es1 = {
 	.name		= "dss1_alwon_fck",
 	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll4_m4x2_ck,
@@ -2034,6 +2075,16 @@ static struct clk dss1_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 static struct clk dss_tv_fck = {
 	.name		= "dss_tv_fck",
 	.ops		= &clkops_omap2_dflt,
@@ -2067,7 +2118,7 @@ static struct clk dss2_alwon_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk dss_ick = {
+static struct clk dss_ick_3430es1 = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "dss_ick",
 	.ops		= &clkops_omap2_dflt,
@@ -2079,6 +2130,18 @@ static struct clk dss_ick = {
 	.recalc		= &followparent_recalc,
 };
 
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clk_clkdm,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
 /* CAM */
 
 static struct clk cam_mclk = {
@@ -2118,7 +2181,7 @@ static struct clk csi2_96m_fck = {
 
 static struct clk usbhost_120m_fck = {
 	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap2_dflt,
 	.parent		= &dpll5_m2_ck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2129,7 +2192,7 @@ static struct clk usbhost_120m_fck = {
 
 static struct clk usbhost_48m_fck = {
 	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &omap_48m_fck,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
@@ -2141,7 +2204,7 @@ static struct clk usbhost_48m_fck = {
 static struct clk usbhost_ick = {
 	/* Handles both L3 and L4 clocks */
 	.name		= "usbhost_ick",
-	.ops		= &clkops_omap2_dflt_wait,
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
 	.parent		= &l4_ick,
 	.init		= &omap2_init_clk_clkdm,
 	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),

arch/arm/mach-omap2/cm.h

@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)

arch/arm/mach-omap2/io.c

@@ -276,14 +276,15 @@ static int __init _omap2_init_reprogram_sdrc(void)
 	return v;
 }
 
-void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
+void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1)
 {
 	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
-	omap2_sdrc_init(sp);
+	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
 	_omap2_init_reprogram_sdrc();
 #endif
 	gpmc_init();

arch/arm/mach-omap2/mmc-twl4030.c

@@ -119,6 +119,7 @@ static int twl_mmc_late_init(struct device *dev)
 				if (i != 0)
 					break;
 				ret = PTR_ERR(reg);
+				hsmmc[i].vcc = NULL;
 				goto err;
 			}
 			hsmmc[i].vcc = reg;
@@ -165,8 +166,13 @@ static int twl_mmc_late_init(struct device *dev)
 static void twl_mmc_cleanup(struct device *dev)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
+	int i;
 
 	gpio_free(mmc->slots[0].switch_pin);
+	for(i = 0; i < ARRAY_SIZE(hsmmc); i++) {
+		regulator_put(hsmmc[i].vcc);
+		regulator_put(hsmmc[i].vcc_aux);
+	}
 }
 
 #ifdef CONFIG_PM

arch/arm/mach-omap2/mux.c

@@ -486,6 +486,12 @@ MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+
+/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
+		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)

arch/arm/mach-omap2/pm.h

@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;

arch/arm/mach-omap2/pm24xx.c

@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
 			  WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	u32 l;
 

arch/arm/mach-omap2/pm34xx.c

@@ -39,7 +39,9 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+#ifdef CONFIG_SUSPEND
 	u32 saved_state;
+#endif
 	struct list_head node;
 };
 
@@ -293,6 +295,9 @@ static void omap3_pm_idle(void)
 	local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -321,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
 	/* Restore next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
 			printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@ static int omap3_pm_suspend(void)
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@ static int omap3_pm_suspend(void)
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
 	int ret = 0;
 
-	switch (state) {
+	switch (suspend_state) {
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@ static void omap3_pm_finish(void)
 	enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	omap_uart_enable_irqs(0);
+	return 0;
+}
+
+static void omap3_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+	omap_uart_enable_irqs(1);
+	return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap3_pm_begin,
+	.end		= omap3_pm_end,
 	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
 	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
@@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
 	return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
 	int ret;
@@ -692,7 +733,9 @@ int __init omap3_pm_init(void)
 	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
 					 omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
 

arch/arm/mach-omap2/prcm.c

@@ -17,6 +17,7 @@
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/common.h>
 #include <mach/prcm.h>
@@ -28,6 +29,8 @@
 static void __iomem *prm_base;
 static void __iomem *cm_base;
 
+#define MAX_MODULE_ENABLE_WAIT		100000
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -120,6 +123,46 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 }
 EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
 
+/**
+ * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
+ * @reg: physical address of module IDLEST register
+ * @mask: value to mask against to determine if the module is active
+ * @name: name of the clock (for printk)
+ *
+ * Returns 1 if the module indicated readiness in time, or 0 if it
+ * failed to enable in roughly MAX_MODULE_ENABLE_WAIT microseconds.
+ */
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
+{
+	int i = 0;
+	int ena = 0;
+
+	/*
+	 * 24xx uses 0 to indicate not ready, and 1 to indicate ready.
+	 * 34xx reverses this, just to keep us on our toes
+	 */
+	if (cpu_is_omap24xx())
+		ena = mask;
+	else if (cpu_is_omap34xx())
+		ena = 0;
+	else
+		BUG();
+
+	/* Wait for lock */
+	while (((__raw_readl(reg) & mask) != ena) &&
+	       (i++ < MAX_MODULE_ENABLE_WAIT))
+		udelay(1);
+
+	if (i < MAX_MODULE_ENABLE_WAIT)
+		pr_debug("cm: Module associated with clock %s ready after %d "
+			 "loops\n", name, i);
+	else
+		pr_err("cm: Module associated with clock %s didn't enable in "
+		       "%d tries\n", name, MAX_MODULE_ENABLE_WAIT);
+
+	return (i < MAX_MODULE_ENABLE_WAIT) ? 1 : 0;
+};
+
 void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
 	prm_base = omap2_globals->prm;

arch/arm/mach-omap2/sdrc.c

@@ -32,7 +32,7 @@
 #include <mach/sdrc.h>
 #include "sdrc.h"
 
-static struct omap_sdrc_params *sdrc_init_params;
+static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
 
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
@@ -45,33 +45,49 @@ void __iomem *omap2_sms_base;
 /**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
+ * @sdrc_cs0: chip select 0 ram timings **
+ * @sdrc_cs1: chip select 1 ram timings **
  *
  * Return pre-calculated values for the SDRC_ACTIM_CTRLA,
- * SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL, and SDRC_MR registers, for a given
- * SDRC clock rate 'r'.  These parameters control various timing
- * delays in the SDRAM controller that are expressed in terms of the
- * number of SDRC clock cycles to wait; hence the clock rate
- * dependency. Note that sdrc_init_params must be sorted rate
- * descending.  Also assumes that both chip-selects use the same
- * timing parameters.  Returns a struct omap_sdrc_params * upon
- * success, or NULL upon failure.
+ *  SDRC_ACTIM_CTRLB, SDRC_RFR_CTRL and SDRC_MR registers in sdrc_cs[01]
+ *  structs,for a given SDRC clock rate 'r'.
+ * These parameters control various timing delays in the SDRAM controller
+ *  that are expressed in terms of the number of SDRC clock cycles to
+ *  wait; hence the clock rate dependency.
+ *
+ * Supports 2 different timing parameters for both chip selects.
+ *
+ * Note 1: the sdrc_init_params_cs[01] must be sorted rate descending.
+ * Note 2: If sdrc_init_params_cs_1 is not NULL it must be of same size
+ *  as sdrc_init_params_cs_0.
+ *
+ * Fills in the struct omap_sdrc_params * for each chip select.
+ * Returns 0 upon success or -1 upon failure.
  */
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r)
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1)
 {
-	struct omap_sdrc_params *sp;
+	struct omap_sdrc_params *sp0, *sp1;
 
-	if (!sdrc_init_params)
-		return NULL;
+	if (!sdrc_init_params_cs0)
+		return -1;
 
-	sp = sdrc_init_params;
+	sp0 = sdrc_init_params_cs0;
+	sp1 = sdrc_init_params_cs1;
 
-	while (sp->rate && sp->rate != r)
-		sp++;
+	while (sp0->rate && sp0->rate != r) {
+		sp0++;
+		if (sdrc_init_params_cs1)
+			sp1++;
+	}
 
-	if (!sp->rate)
-		return NULL;
+	if (!sp0->rate)
+		return -1;
 
-	return sp;
+	*sdrc_cs0 = sp0;
+	*sdrc_cs1 = sp1;
+	return 0;
 }
 
 
@@ -83,13 +99,15 @@ void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
 
 /**
  * omap2_sdrc_init - initialize SMS, SDRC devices on boot
- * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ * @sdrc_cs[01]: pointers to a null-terminated list of struct omap_sdrc_params
+ *  Support for 2 chip selects timings
  *
  * Turn on smart idle modes for SDRAM scheduler and controller.
  * Program a known-good configuration for the SDRC to deal with buggy
  * bootloaders.
  */
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1)
 {
 	u32 l;
 
@@ -103,11 +121,15 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
 	l |= (0x2 << 3);
 	sdrc_write_reg(l, SDRC_SYSCONFIG);
 
-	sdrc_init_params = sp;
+	sdrc_init_params_cs0 = sdrc_cs0;
+	sdrc_init_params_cs1 = sdrc_cs1;
 
 	/* XXX Enable SRFRONIDLEREQ here also? */
+	/*
+	 * PWDENA should not be set due to 34xx erratum 1.150 - PWDENA
+	 * can cause random memory corruption
+	 */
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
-		(1 << SDRC_POWER_PWDENA_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
 }

arch/arm/mach-omap2/serial.c

@@ -54,6 +54,7 @@ struct omap_uart_state {
 
 	struct plat_serial8250_port *p;
 	struct list_head node;
+	struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
 	{
 		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
@@ -217,6 +229,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 	clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+	/* Clear wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v &= ~uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are cleared */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
 					  int enable)
 {
@@ -246,6 +292,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+	if (device_may_wakeup(&uart->pdev.dev))
+		omap_uart_enable_wakeup(uart);
+	else
+		omap_uart_disable_wakeup(uart);
+
 	if (!uart->clocked)
 		return;
 
@@ -292,7 +343,6 @@ void omap_uart_resume_idle(int num)
 			/* Check for normal UART wakeup */
 			if (__raw_readl(uart->wk_st) & uart->wk_mask)
 				omap_uart_block_sleep(uart);
-
 			return;
 		}
 	}
@@ -346,16 +396,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	u32 v;
 	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
-	uart->timeout = sleep_timeout;
+	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
 	mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -413,76 +460,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	/* Set wake-enable bit */
-	if (uart->wk_en && uart->wk_mask) {
-		v = __raw_readl(uart->wk_en);
-		v |= uart->wk_mask;
-		__raw_writel(v, uart->wk_en);
-	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v;
-
-		v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
-
 	p->flags |= UPF_SHARE_IRQ;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+	int ret;
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (enable)
+			ret = request_irq(uart->p->irq, omap_uart_interrupt,
+				IRQF_SHARED, "serial idle", (void *)uart);
+		else
+			free_irq(uart->p->irq, (void *)uart);
+	}
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
-	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
+
+	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct omap_uart_state *uart;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
 		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
-	sleep_timeout = value * HZ;
-	list_for_each_entry(uart, &uart_list, node) {
-		uart->timeout = sleep_timeout;
-		if (uart->timeout)
-			mod_timer(&uart->timer, jiffies + uart->timeout);
-		else
-			/* A zero value means disable timeout feature */
-			omap_uart_block_sleep(uart);
-	}
+
+	uart->timeout = value * HZ;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		/* A zero value means disable timeout feature */
+		omap_uart_block_sleep(uart);
+
 	return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM,
+			.dev			= {
+				.platform_data	= serial_platform_data0,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM1,
+			.dev			= {
+				.platform_data	= serial_platform_data1,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM2,
+			.dev			= {
+				.platform_data	= serial_platform_data2,
+			},
+		},
 	},
 };
 
 void __init omap_serial_init(void)
 {
-	int i, err;
+	int i;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -496,14 +568,12 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
-	if (cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-			serial_platform_data[i].irq += 32;
-	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
 		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+		struct plat_serial8250_port *p = dev->platform_data;
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -531,20 +601,21 @@ void __init omap_serial_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add(&uart->node, &uart_list);
+		list_add_tail(&uart->node, &uart_list);
+
+		if (cpu_is_omap44xx())
+			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-	}
-
-	err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-	if (!err)
-		err = sysfs_create_file(&serial_device.dev.kobj,
-					&sleep_timeout_attr.attr);
-#endif
 
+		if (WARN_ON(platform_device_register(pdev)))
+			continue;
+		if ((cpu_is_omap34xx() && uart->padconf) ||
+		    (uart->wk_en && uart->wk_mask)) {
+			device_init_wakeup(dev, true);
+			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+		}
+	}
 }
-

arch/arm/mach-omap2/sram34xx.S

@@ -36,7 +36,7 @@
 
 	.text
 
-/* r4 parameters */
+/* r1 parameters */
 #define SDRC_NO_UNLOCK_DLL		0x0
 #define SDRC_UNLOCK_DLL			0x1
 
@@ -58,7 +58,6 @@
 
 /* SDRC_POWER bit settings */
 #define SRFRONIDLEREQ_MASK		0x40
-#define PWDENA_MASK			0x4
 
 /* CM_IDLEST1_CORE bit settings */
 #define ST_SDRC_MASK			0x2
@@ -71,41 +70,72 @@
 
 /*
  * omap3_sram_configure_core_dpll - change DPLL3 M2 divider
- * r0 = new SDRC_RFR_CTRL register contents
- * r1 = new SDRC_ACTIM_CTRLA register contents
- * r2 = new SDRC_ACTIM_CTRLB register contents
- * r3 = new M2 divider setting (only 1 and 2 supported right now)
- * r4 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
+ *
+ * Params passed in registers:
+ *  r0 = new M2 divider setting (only 1 and 2 supported right now)
+ *  r1 = unlock SDRC DLL? (1 = yes, 0 = no).  Only unlock DLL for
  *      SDRC rates < 83MHz
- * r5 = number of MPU cycles to wait for SDRC to stabilize after
+ *  r2 = number of MPU cycles to wait for SDRC to stabilize after
  *      reprogramming the SDRC when switching to a slower MPU speed
- * r6 = new SDRC_MR_0 register value
- * r7 = increasing SDRC rate? (1 = yes, 0 = no)
+ *  r3 = increasing SDRC rate? (1 = yes, 0 = no)
+ *
+ * Params passed via the stack. The needed params will be copied in SRAM
+ *  before use by the code in SRAM (SDRAM is not accessible during SDRC
+ *  reconfiguration):
+ *  new SDRC_RFR_CTRL_0 register contents
+ *  new SDRC_ACTIM_CTRL_A_0 register contents
+ *  new SDRC_ACTIM_CTRL_B_0 register contents
+ *  new SDRC_MR_0 register value
+ *  new SDRC_RFR_CTRL_1 register contents
+ *  new SDRC_ACTIM_CTRL_A_1 register contents
+ *  new SDRC_ACTIM_CTRL_B_1 register contents
+ *  new SDRC_MR_1 register value
  *
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters
+ *  are not programmed into the SDRC CS1 registers
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
-	ldr	r4, [sp, #52]		@ pull extra args off the stack
-	ldr	r5, [sp, #56]		@ load extra args from the stack
-	ldr	r6, [sp, #60]		@ load extra args from the stack
-	ldr	r7, [sp, #64]		@ load extra args from the stack
+
+					@ pull the extra args off the stack
+					@  and store them in SRAM
+	ldr	r4, [sp, #52]
+	str     r4, omap_sdrc_rfr_ctrl_0_val
+	ldr	r4, [sp, #56]
+	str     r4, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r4, [sp, #60]
+	str     r4, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r4, [sp, #64]
+	str     r4, omap_sdrc_mr_0_val
+	ldr	r4, [sp, #68]
+	str     r4, omap_sdrc_rfr_ctrl_1_val
+	cmp	r4, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_params		@  do not use cs1 params
+	ldr	r4, [sp, #72]
+	str     r4, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r4, [sp, #76]
+	str     r4, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r4, [sp, #80]
+	str     r4, omap_sdrc_mr_1_val
+skip_cs1_params:
 	dsb				@ flush buffered writes to interconnect
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	bleq	configure_sdrc		@ program the SDRC regs early (for RFR)
-	cmp	r4, #SDRC_UNLOCK_DLL	@ set the intended DLL state
+	cmp	r1, #SDRC_UNLOCK_DLL	@ set the intended DLL state
 	bleq	unlock_dll
 	blne	lock_dll
 	bl	sdram_in_selfrefresh	@ put SDRAM in self refresh, idle SDRC
 	bl 	configure_core_dpll	@ change the DPLL3 M2 divider
+	mov	r12, r2
+	bl	wait_clk_stable		@ wait for SDRC to stabilize
 	bl	enable_sdrc		@ take SDRC out of idle
-	cmp	r4, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
+	cmp	r1, #SDRC_UNLOCK_DLL	@ wait for DLL status to change
 	bleq	wait_dll_unlock
 	blne	wait_dll_lock
-	cmp	r7, #1			@ if increasing SDRC clk rate,
+	cmp	r3, #1			@ if increasing SDRC clk rate,
 	beq	return_to_sdram		@ return to SDRAM code, otherwise,
 	bl	configure_sdrc		@ reprogram SDRC regs now
-	mov	r12, r5
-	bl	wait_clk_stable		@ wait for SDRC to stabilize
 return_to_sdram:
 	isb				@ prevent speculative exec past here
 	mov 	r0, #0 			@ return value
@@ -113,7 +143,7 @@ return_to_sdram:
 unlock_dll:
 	ldr	r11, omap3_sdrc_dlla_ctrl
 	ldr	r12, [r11]
-	and	r12, r12, #FIXEDDELAY_MASK
+	bic	r12, r12, #FIXEDDELAY_MASK
 	orr	r12, r12, #FIXEDDELAY_DEFAULT
 	orr	r12, r12, #DLLIDLE_MASK
 	str	r12, [r11]		@ (no OCP barrier needed)
@@ -129,7 +159,6 @@ sdram_in_selfrefresh:
 	ldr	r12, [r11]		@ read the contents of SDRC_POWER
 	mov	r9, r12			@ keep a copy of SDRC_POWER bits
 	orr 	r12, r12, #SRFRONIDLEREQ_MASK	@ enable self refresh on idle
-	bic 	r12, r12, #PWDENA_MASK	@ clear PWDENA
 	str 	r12, [r11]		@ write back to SDRC_POWER register
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 idle_sdrc:
@@ -149,7 +178,7 @@ configure_core_dpll:
 	ldr	r12, [r11]
 	ldr	r10, core_m2_mask_val	@ modify m2 for core dpll
 	and	r12, r12, r10
-	orr	r12, r12, r3, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
+	orr	r12, r12, r0, lsl #CORE_DPLL_CLKOUT_DIV_SHIFT
 	str	r12, [r11]
 	ldr	r12, [r11]		@ posted-write barrier for CM
 	bx	lr
@@ -187,15 +216,34 @@ wait_dll_unlock:
 	bne	wait_dll_unlock
 	bx	lr
 configure_sdrc:
-	ldr	r11, omap3_sdrc_rfr_ctrl
-	str	r0, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrla
-	str	r1, [r11]
-	ldr	r11, omap3_sdrc_actim_ctrlb
-	str	r2, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
+	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
+	str	r12, [r11]			@ store
+	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_0_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_0
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_0_val
 	ldr	r11, omap3_sdrc_mr_0
-	str	r6, [r11]
-	ldr	r6, [r11]		@ posted-write barrier for SDRC
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_rfr_ctrl_1_val
+	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
+	beq	skip_cs1_prog		@  do not program cs1 params
+	ldr	r11, omap3_sdrc_rfr_ctrl_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_a_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_actim_ctrl_b_1_val
+	ldr	r11, omap3_sdrc_actim_ctrl_b_1
+	str	r12, [r11]
+	ldr	r12, omap_sdrc_mr_1_val
+	ldr	r11, omap3_sdrc_mr_1
+	str	r12, [r11]
+skip_cs1_prog:
+	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
 
 omap3_sdrc_power:
@@ -206,14 +254,40 @@ omap3_cm_idlest1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST)
 omap3_cm_iclken1_core:
 	.word OMAP34XX_CM_REGADDR(CORE_MOD, CM_ICLKEN1)
-omap3_sdrc_rfr_ctrl:
+
+omap3_sdrc_rfr_ctrl_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_0)
-omap3_sdrc_actim_ctrla:
+omap3_sdrc_rfr_ctrl_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_RFR_CTRL_1)
+omap3_sdrc_actim_ctrl_a_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_0)
-omap3_sdrc_actim_ctrlb:
+omap3_sdrc_actim_ctrl_a_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_A_1)
+omap3_sdrc_actim_ctrl_b_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_0)
+omap3_sdrc_actim_ctrl_b_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_ACTIM_CTRL_B_1)
 omap3_sdrc_mr_0:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_0)
+omap3_sdrc_mr_1:
+	.word OMAP34XX_SDRC_REGADDR(SDRC_MR_1)
+omap_sdrc_rfr_ctrl_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_rfr_ctrl_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_a_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_actim_ctrl_b_1_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_0_val:
+	.word 0xDEADBEEF
+omap_sdrc_mr_1_val:
+	.word 0xDEADBEEF
+
 omap3_sdrc_dlla_status:
 	.word OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 omap3_sdrc_dlla_ctrl:
@@ -223,3 +297,4 @@ core_m2_mask_val:
 
 ENTRY(omap3_sram_configure_core_dpll_sz)
 	.word	. - omap3_sram_configure_core_dpll
+

arch/arm/mach-u300/core.c

@@ -510,7 +510,7 @@ static struct db_chip db_chips[] __initdata = {
 	}
 };
 
-static void u300_init_check_chip(void)
+static void __init u300_init_check_chip(void)
 {
 
 	u16 val;

arch/arm/mm/init.c

@@ -120,6 +120,32 @@ void show_mem(void)
 	printk("%d pages swap cached\n", cached);
 }
 
+static void __init find_node_limits(int node, struct meminfo *mi,
+	unsigned long *min, unsigned long *max_low, unsigned long *max_high)
+{
+	int i;
+
+	*min = -1UL;
+	*max_low = *max_high = 0;
+
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		unsigned long start, end;
+
+		start = bank_pfn_start(bank);
+		end = bank_pfn_end(bank);
+
+		if (*min > start)
+			*min = start;
+		if (*max_high < end)
+			*max_high = end;
+		if (bank->highmem)
+			continue;
+		if (*max_low < end)
+			*max_low = end;
+	}
+}
+
 /*
  * FIXME: We really want to avoid allocating the bootmap bitmap
  * over the top of the initrd.  Hopefully, this is located towards
@@ -210,40 +236,24 @@ static inline void map_memory_bank(struct membank *bank)
 #endif
 }
 
-static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
+static void __init bootmem_init_node(int node, struct meminfo *mi,
+	unsigned long start_pfn, unsigned long end_pfn)
 {
-	unsigned long start_pfn, end_pfn, boot_pfn;
+	unsigned long boot_pfn;
 	unsigned int boot_pages;
 	pg_data_t *pgdat;
 	int i;
 
-	start_pfn = -1UL;
-	end_pfn = 0;
-
 	/*
-	 * Calculate the pfn range, and map the memory banks for this node.
+	 * Map the memory banks for this node.
 	 */
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		unsigned long start, end;
 
-		start = bank_pfn_start(bank);
-		end = bank_pfn_end(bank);
-
-		if (start_pfn > start)
-			start_pfn = start;
-		if (end_pfn < end)
-			end_pfn = end;
-
-		map_memory_bank(bank);
+		if (!bank->highmem)
+			map_memory_bank(bank);
 	}
 
-	/*
-	 * If there is no memory in this node, ignore it.
-	 */
-	if (end_pfn == 0)
-		return end_pfn;
-
 	/*
 	 * Allocate the bootmem bitmap page.
 	 */
@@ -260,7 +270,8 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 
 	for_each_nodebank(i, mi, node) {
 		struct membank *bank = &mi->bank[i];
-		free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
+		if (!bank->highmem)
+			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
 		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
 	}
 
@@ -269,8 +280,6 @@ static unsigned long __init bootmem_init_node(int node, struct meminfo *mi)
 	 */
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
-
-	return end_pfn;
 }
 
 static void __init bootmem_reserve_initrd(int node)
@@ -297,33 +306,39 @@ static void __init bootmem_reserve_initrd(int node)
 static void __init bootmem_free_node(int node, struct meminfo *mi)
 {
 	unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
-	unsigned long start_pfn, end_pfn;
-	pg_data_t *pgdat = NODE_DATA(node);
+	unsigned long min, max_low, max_high;
 	int i;
 
-	start_pfn = pgdat->bdata->node_min_pfn;
-	end_pfn = pgdat->bdata->node_low_pfn;
+	find_node_limits(node, mi, &min, &max_low, &max_high);
 
 	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
-	memset(zhole_size, 0, sizeof(zhole_size));
 
 	/*
 	 * The size of this node has already been determined.  If we need
 	 * to do anything fancy with the allocation of this memory to the
 	 * zones, now is the time to do it.
 	 */
-	zone_size[0] = end_pfn - start_pfn;
+	zone_size[0] = max_low - min;
+#ifdef CONFIG_HIGHMEM
+	zone_size[ZONE_HIGHMEM] = max_high - max_low;
+#endif
 
 	/*
 	 * For each bank in this node, calculate the size of the holes.
 	 *  holes = node_size - sum(bank_sizes_in_node)
 	 */
-	zhole_size[0] = zone_size[0];
-	for_each_nodebank(i, mi, node)
-		zhole_size[0] -= bank_pfn_size(&mi->bank[i]);
+	memcpy(zhole_size, zone_size, sizeof(zhole_size));
+	for_each_nodebank(i, mi, node) {
+		int idx = 0;
+#ifdef CONFIG_HIGHMEM
+		if (mi->bank[i].highmem)
+			idx = ZONE_HIGHMEM;
+#endif
+		zhole_size[idx] -= bank_pfn_size(&mi->bank[i]);
+	}
 
 	/*
 	 * Adjust the sizes according to any special requirements for
@@ -331,13 +346,13 @@ static void __init bootmem_free_node(int node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, min, zhole_size);
 }
 
 void __init bootmem_init(void)
 {
 	struct meminfo *mi = &meminfo;
-	unsigned long memend_pfn = 0;
+	unsigned long min, max_low, max_high;
 	int node, initrd_node;
 
 	/*
@@ -345,11 +360,29 @@ void __init bootmem_init(void)
 	 */
 	initrd_node = check_initrd(mi);
 
+	max_low = max_high = 0;
+
 	/*
 	 * Run through each node initialising the bootmem allocator.
 	 */
 	for_each_node(node) {
-		unsigned long end_pfn = bootmem_init_node(node, mi);
+		unsigned long node_low, node_high;
+
+		find_node_limits(node, mi, &min, &node_low, &node_high);
+
+		if (node_low > max_low)
+			max_low = node_low;
+		if (node_high > max_high)
+			max_high = node_high;
+
+		/*
+		 * If there is no memory in this node, ignore it.
+		 * (We can't have nodes which have no lowmem)
+		 */
+		if (node_low == 0)
+			continue;
+
+		bootmem_init_node(node, mi, min, node_low);
 
 		/*
 		 * Reserve any special node zero regions.
@@ -362,12 +395,6 @@ void __init bootmem_init(void)
 		 */
 		if (node == initrd_node)
 			bootmem_reserve_initrd(node);
-
-		/*
-		 * Remember the highest memory PFN.
-		 */
-		if (end_pfn > memend_pfn)
-			memend_pfn = end_pfn;
 	}
 
 	/*
@@ -383,7 +410,7 @@ void __init bootmem_init(void)
 	for_each_node(node)
 		bootmem_free_node(node, mi);
 
-	high_memory = __va((memend_pfn << PAGE_SHIFT) - 1) + 1;
+	high_memory = __va((max_low << PAGE_SHIFT) - 1) + 1;
 
 	/*
 	 * This doesn't seem to be used by the Linux memory manager any
@@ -393,7 +420,8 @@ void __init bootmem_init(void)
 	 * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
 	 * the system, not the maximum PFN.
 	 */
-	max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+	max_low_pfn = max_low - PHYS_PFN_OFFSET;
+	max_pfn = max_high - PHYS_PFN_OFFSET;
 }
 
 static inline int free_area(unsigned long pfn, unsigned long end, char *s)

arch/arm/mm/mmu.c

@@ -687,13 +687,19 @@ __early_param("vmalloc=", early_vmalloc);
 
 static void __init sanity_check_meminfo(void)
 {
-	int i, j;
+	int i, j, highmem = 0;
 
 	for (i = 0, j = 0; i < meminfo.nr_banks; i++) {
 		struct membank *bank = &meminfo.bank[j];
 		*bank = meminfo.bank[i];
 
 #ifdef CONFIG_HIGHMEM
+		if (__va(bank->start) > VMALLOC_MIN ||
+		    __va(bank->start) < (void *)PAGE_OFFSET)
+			highmem = 1;
+
+		bank->highmem = highmem;
+
 		/*
 		 * Split those memory banks which are partially overlapping
 		 * the vmalloc area greatly simplifying things later.
@@ -714,6 +720,7 @@ static void __init sanity_check_meminfo(void)
 				i++;
 				bank[1].size -= VMALLOC_MIN - __va(bank->start);
 				bank[1].start = __pa(VMALLOC_MIN - 1) + 1;
+				bank[1].highmem = highmem = 1;
 				j++;
 			}
 			bank->size = VMALLOC_MIN - __va(bank->start);

arch/arm/plat-omap/cpu-omap.c

@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
 	/* Ensure desired rate is within allowed range.  Some govenors
 	 * (ondemand) will just pass target_freq=0 to get the minimum. */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
 
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;

arch/arm/plat-omap/dma.c

@@ -946,7 +946,9 @@ void omap_start_dma(int lch)
 
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-	} else if (cpu_class_is_omap2()) {
+	} else if (cpu_is_omap242x() ||
+		(cpu_is_omap243x() &&  omap_type() <= OMAP2430_REV_ES1_0)) {
+
 		/* Errata: Need to write lch even if not using chaining */
 		dma_write(lch, CLNK_CTRL(lch));
 	}

arch/arm/plat-omap/gpio.c

@@ -476,14 +476,12 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 	__raw_writel(l, reg);
 }
 
-static int __omap_get_gpio_datain(int gpio)
+static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 {
-	struct gpio_bank *bank;
 	void __iomem *reg;
 
 	if (check_gpio(gpio) < 0)
 		return -EINVAL;
-	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP1
@@ -524,6 +522,53 @@ static int __omap_get_gpio_datain(int gpio)
 			& (1 << get_gpio_index(gpio))) != 0;
 }
 
+static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg;
+
+	if (check_gpio(gpio) < 0)
+		return -EINVAL;
+	reg = bank->base;
+
+	switch (bank->method) {
+#ifdef CONFIG_ARCH_OMAP1
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DATAOUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP730
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DATA_OUTPUT;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+		defined(CONFIG_ARCH_OMAP4)
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_DATAOUT;
+		break;
+#endif
+	default:
+		return -EINVAL;
+	}
+
+	return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
+}
+
 #define MOD_REG_BIT(reg, bit_mask, set)	\
 do {	\
 	int l = __raw_readl(base + reg); \
@@ -1189,6 +1234,7 @@ static void gpio_mask_irq(unsigned int irq)
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 
 	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1196,6 +1242,11 @@ static void gpio_unmask_irq(unsigned int irq)
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	struct irq_desc *desc = irq_to_desc(irq);
+	u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
@@ -1350,9 +1401,49 @@ static int gpio_input(struct gpio_chip *chip, unsigned offset)
 	return 0;
 }
 
+static int gpio_is_input(struct gpio_bank *bank, int mask)
+{
+	void __iomem *reg = bank->base;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_IO_CNTL;
+		break;
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_1610:
+		reg += OMAP1610_GPIO_DIRECTION;
+		break;
+	case METHOD_GPIO_730:
+		reg += OMAP730_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_850:
+		reg += OMAP850_GPIO_DIR_CONTROL;
+		break;
+	case METHOD_GPIO_24XX:
+		reg += OMAP24XX_GPIO_OE;
+		break;
+	}
+	return __raw_readl(reg) & mask;
+}
+
 static int gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	return __omap_get_gpio_datain(chip->base + offset);
+	struct gpio_bank *bank;
+	void __iomem *reg;
+	int gpio;
+	u32 mask;
+
+	gpio = chip->base + offset;
+	bank = get_gpio_bank(gpio);
+	reg = bank->base;
+	mask = 1 << get_gpio_index(gpio);
+
+	if (gpio_is_input(bank, mask))
+		return _get_gpio_datain(bank, gpio);
+	else
+		return _get_gpio_dataout(bank, gpio);
 }
 
 static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
@@ -1886,34 +1977,6 @@ arch_initcall(omap_gpio_sysinit);
 #include <linux/debugfs.h>
 #include <linux/seq_file.h>
 
-static int gpio_is_input(struct gpio_bank *bank, int mask)
-{
-	void __iomem *reg = bank->base;
-
-	switch (bank->method) {
-	case METHOD_MPUIO:
-		reg += OMAP_MPUIO_IO_CNTL;
-		break;
-	case METHOD_GPIO_1510:
-		reg += OMAP1510_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_1610:
-		reg += OMAP1610_GPIO_DIRECTION;
-		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_24XX:
-		reg += OMAP24XX_GPIO_OE;
-		break;
-	}
-	return __raw_readl(reg) & mask;
-}
-
-
 static int dbg_gpio_show(struct seq_file *s, void *unused)
 {
 	unsigned	i, j, gpio;

arch/arm/plat-omap/include/mach/clock.h

@@ -20,6 +20,8 @@ struct clockdomain;
 struct clkops {
 	int			(*enable)(struct clk *);
 	void			(*disable)(struct clk *);
+	void			(*find_idlest)(struct clk *, void __iomem **, u8 *);
+	void			(*find_companion)(struct clk *, void __iomem **, u8 *);
 };
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \

arch/arm/plat-omap/include/mach/cpu.h

@@ -378,9 +378,6 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
 				cpu_is_omap44xx())
 
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
-			defined(CONFIG_ARCH_OMAP4)
-
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
 #define OMAP2420_REV_ES1_0	0x24200024
@@ -436,5 +433,3 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
-
-#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */

arch/arm/plat-omap/include/mach/io.h

@@ -228,7 +228,8 @@ extern void omap1_map_common_io(void);
 extern void omap1_init_common_hw(void);
 
 extern void omap2_map_common_io(void);
-extern void omap2_init_common_hw(struct omap_sdrc_params *sp);
+extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
+				 struct omap_sdrc_params *sdrc_cs1);
 
 #define __arch_ioremap(p,s,t)	omap_ioremap(p,s,t)
 #define __arch_iounmap(v)	omap_iounmap(v)

arch/arm/plat-omap/include/mach/mux.h

@@ -853,6 +853,10 @@ enum omap34xx_index {
 	AE5_34XX_GPIO143,
 	H19_34XX_GPIO164_OUT,
 	J25_34XX_GPIO170,
+
+	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
+	H16_34XX_SDRC_CKE0,
+	H17_34XX_SDRC_CKE1,
 };
 
 struct omap_mux_cfg {

arch/arm/plat-omap/include/mach/prcm.h

@@ -25,6 +25,7 @@
 
 u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
 #endif
 

arch/arm/plat-omap/include/mach/sdrc.h

@@ -30,6 +30,10 @@
 #define SDRC_ACTIM_CTRL_A_0	0x09c
 #define SDRC_ACTIM_CTRL_B_0	0x0a0
 #define SDRC_RFR_CTRL_0		0x0a4
+#define SDRC_MR_1		0x0B4
+#define SDRC_ACTIM_CTRL_A_1	0x0C4
+#define SDRC_ACTIM_CTRL_B_1	0x0C8
+#define SDRC_RFR_CTRL_1		0x0D4
 
 /*
  * These values represent the number of memory clock cycles between
@@ -102,8 +106,11 @@ struct omap_sdrc_params {
 	u32 mr;
 };
 
-void __init omap2_sdrc_init(struct omap_sdrc_params *sp);
-struct omap_sdrc_params *omap2_sdrc_get_params(unsigned long r);
+void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+			    struct omap_sdrc_params *sdrc_cs1);
+int omap2_sdrc_get_params(unsigned long r,
+			  struct omap_sdrc_params **sdrc_cs0,
+			  struct omap_sdrc_params **sdrc_cs1);
 
 #ifdef CONFIG_ARCH_OMAP2
 

arch/arm/plat-omap/include/mach/serial.h

@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif

arch/arm/plat-omap/include/mach/sram.h

@@ -21,11 +21,12 @@ extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 				      u32 mem_type);
 extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
 
-extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
-				     u32 sdrc_actim_ctrla,
-				     u32 sdrc_actim_ctrlb, u32 m2,
-				     u32 unlock_dll, u32 f, u32 sdrc_mr,
-				     u32 inc);
+extern u32 omap3_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -59,12 +60,12 @@ extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
 						u32 mem_type);
 extern unsigned long omap243x_sram_reprogram_sdrc_sz;
 
-
-extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
-					  u32 sdrc_actim_ctrla,
-					  u32 sdrc_actim_ctrlb, u32 m2,
-					  u32 unlock_dll, u32 f, u32 sdrc_mr,
-					  u32 inc);
+extern u32 omap3_sram_configure_core_dpll(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
 #endif

arch/arm/plat-omap/sram.c

@@ -44,9 +44,9 @@
 #define OMAP2_SRAM_VA		0xe3000000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xd7000000
+#define OMAP3_SRAM_VA           0xe3000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
-#define OMAP3_SRAM_PUB_VA       0xd7008000
+#define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
 #define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
 #define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
 
@@ -373,20 +373,26 @@ static inline int omap243x_sram_init(void)
 
 #ifdef CONFIG_ARCH_OMAP3
 
-static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
-					      u32 sdrc_actim_ctrla,
-					      u32 sdrc_actim_ctrlb,
-					      u32 m2, u32 unlock_dll,
-					      u32 f, u32 sdrc_mr, u32 inc);
-u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
-			      u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll,
-			      u32 f, u32 sdrc_mr, u32 inc)
+static u32 (*_omap3_sram_configure_core_dpll)(
+			u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+
+u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
+			u32 sdrc_rfr_ctrl_0, u32 sdrc_actim_ctrl_a_0,
+			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
+			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
+			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1)
 {
 	BUG_ON(!_omap3_sram_configure_core_dpll);
-	return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
-					       sdrc_actim_ctrla,
-					       sdrc_actim_ctrlb, m2,
-					       unlock_dll, f, sdrc_mr, inc);
+	return _omap3_sram_configure_core_dpll(
+			m2, unlock_dll, f, inc,
+			sdrc_rfr_ctrl_0, sdrc_actim_ctrl_a_0,
+			sdrc_actim_ctrl_b_0, sdrc_mr_0,
+			sdrc_rfr_ctrl_1, sdrc_actim_ctrl_a_1,
+			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
 /* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */

arch/arm/plat-s3c24xx/clock-dclk.c

@@ -129,7 +129,7 @@ static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
 
 	/* calculate the MISCCR setting for the clock */
 
-	if (parent == &clk_xtal)
+	if (parent == &clk_mpll)
 		source = S3C2410_MISCCR_CLK0_MPLL;
 	else if (parent == &clk_upll)
 		source = S3C2410_MISCCR_CLK0_UPLL;

arch/ia64/Makefile

@@ -41,11 +41,6 @@ $(error Sorry, you need a newer version of the assember, one that is built from
 		ftp://ftp.hpl.hp.com/pub/linux-ia64/gas-030124.tar.gz)
 endif
 
-ifeq ($(call cc-version),0304)
-	cflags-$(CONFIG_ITANIUM)	+= -mtune=merced
-	cflags-$(CONFIG_MCKINLEY)	+= -mtune=mckinley
-endif
-
 KBUILD_CFLAGS += $(cflags-y)
 head-y := arch/ia64/kernel/head.o arch/ia64/kernel/init_task.o
 

arch/ia64/include/asm/bitops.h

@@ -286,7 +286,7 @@ __test_and_clear_bit(int nr, volatile void * addr)
 {
 	__u32 *p = (__u32 *) addr + (nr >> 5);
 	__u32 m = 1 << (nr & 31);
-	int oldbitset = *p & m;
+	int oldbitset = (*p & m) != 0;
 
 	*p &= ~m;
 	return oldbitset;

arch/ia64/include/asm/pgtable.h

@@ -155,7 +155,6 @@
 #include <linux/bitops.h>
 #include <asm/cacheflush.h>
 #include <asm/mmu_context.h>
-#include <asm/processor.h>
 
 /*
  * Next come the mappings that determine how mmap() protection bits

arch/ia64/kernel/ia64_ksyms.c

@@ -21,6 +21,7 @@ EXPORT_SYMBOL(csum_ipv6_magic);
 
 #include <asm/page.h>
 EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
 
 #ifdef CONFIG_VIRTUAL_MEM_MAP
 #include <linux/bootmem.h>
@@ -60,9 +61,6 @@ EXPORT_SYMBOL(__udivdi3);
 EXPORT_SYMBOL(__moddi3);
 EXPORT_SYMBOL(__umoddi3);
 
-#include <asm/page.h>
-EXPORT_SYMBOL(copy_page);
-
 #if defined(CONFIG_MD_RAID456) || defined(CONFIG_MD_RAID456_MODULE)
 extern void xor_ia64_2(void);
 extern void xor_ia64_3(void);

arch/ia64/kernel/iosapic.c

@@ -1072,6 +1072,10 @@ iosapic_init (unsigned long phys_addr, unsigned int gsi_base)
 	}
 
 	addr = ioremap(phys_addr, 0);
+	if (addr == NULL) {
+		spin_unlock_irqrestore(&iosapic_lock, flags);
+		return -ENOMEM;
+	}
 	ver = iosapic_version(addr);
 	if ((err = iosapic_check_gsi_range(gsi_base, ver))) {
 		iounmap(addr);

arch/ia64/kernel/pci-dma.c

@@ -69,11 +69,6 @@ iommu_dma_init(void)
 
 int iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct dma_map_ops *ops = platform_dma_get_ops(dev);
-
-	if (ops->dma_supported)
-		return ops->dma_supported(dev, mask);
-
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
 	   The caller just has to use GFP_DMA in this case. */

arch/ia64/kernel/topology.c

@@ -372,6 +372,10 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 	retval = kobject_init_and_add(&all_cpu_cache_info[cpu].kobj,
 				      &cache_ktype_percpu_entry, &sys_dev->kobj,
 				      "%s", "cache");
+	if (unlikely(retval < 0)) {
+		cpu_cache_sysfs_exit(cpu);
+		return retval;
+	}
 
 	for (i = 0; i < all_cpu_cache_info[cpu].num_cache_leaves; i++) {
 		this_object = LEAF_KOBJECT_PTR(cpu,i);
@@ -385,7 +389,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(&all_cpu_cache_info[cpu].kobj);
 			cpu_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}

arch/microblaze/configs/mmu_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Fri May 22 10:02:33 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 11:00:02 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -18,7 +18,11 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
+# CONFIG_PCI is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -59,8 +63,8 @@ CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
 # CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
 # CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -71,7 +75,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -84,13 +87,22 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -102,7 +114,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,9 +206,9 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
 # Exectuable file formats
@@ -262,6 +274,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -325,7 +338,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -344,7 +356,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -410,6 +422,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -418,12 +435,6 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -433,22 +444,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -469,9 +465,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -485,12 +484,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -678,6 +680,7 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_SAMPLES is not set
+# CONFIG_KMEMCHECK is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_HEART_BEAT=y
 CONFIG_DEBUG_BOOTMEM=y
@@ -793,6 +796,5 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/configs/nommu_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc5
-# Mon May 11 09:01:02 2009
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 10:35:30 2009
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -17,9 +17,12 @@ CONFIG_GENERIC_TIME=y
 # CONFIG_GENERIC_TIME_VSYSCALL is not set
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_CSUM=y
 # CONFIG_PCI is not set
-# CONFIG_NO_DMA is not set
+CONFIG_NO_DMA=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -64,7 +67,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -76,13 +78,23 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -95,7 +107,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -156,8 +168,16 @@ CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttyUL0,115200"
 # CONFIG_CMDLINE_FORCE is not set
 CONFIG_OF=y
-CONFIG_OF_DEVICE=y
 CONFIG_PROC_DEVICETREE=y
+
+#
+# Advanced setup
+#
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_KERNEL_START=0x90000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -169,7 +189,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
 
 #
@@ -237,6 +257,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -254,7 +275,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -353,6 +378,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -364,6 +390,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_C2PORT is not set
@@ -383,7 +410,6 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -402,7 +428,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
 
@@ -463,23 +489,25 @@ CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_RTC is not set
 # CONFIG_GEN_RTC is not set
+# CONFIG_XILINX_HWICAP is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -489,22 +517,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -520,9 +533,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
 CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
@@ -543,9 +557,12 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -558,12 +575,15 @@ CONFIG_EXT2_FS=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -813,6 +833,5 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y

arch/microblaze/include/asm/hardirq.h

@@ -12,8 +12,6 @@
 /* should be defined in each interrupt controller driver */
 extern unsigned int get_irq(struct pt_regs *regs);
 
-#define ack_bad_irq ack_bad_irq
-void ack_bad_irq(unsigned int irq);
 #include <asm-generic/hardirq.h>
 
 #endif /* _ASM_MICROBLAZE_HARDIRQ_H */

arch/microblaze/kernel/intc.c

@@ -12,6 +12,7 @@
 #include <linux/irq.h>
 #include <asm/page.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 
 #include <asm/prom.h>
 #include <asm/irq.h>
@@ -130,6 +131,7 @@ void __init init_IRQ(void)
 		if (intc)
 			break;
 	}
+	BUG_ON(!intc);
 
 	intc_baseaddr = *(int *) of_get_property(intc, "reg", NULL);
 	intc_baseaddr = (unsigned long) ioremap(intc_baseaddr, PAGE_SIZE);

arch/microblaze/kernel/irq.c

@@ -30,15 +30,6 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index)
 }
 EXPORT_SYMBOL_GPL(irq_of_parse_and_map);
 
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
-}
-
 static u32 concurrent_irq;
 
 void do_IRQ(struct pt_regs *regs)

arch/microblaze/kernel/syscall_table.S

@@ -313,7 +313,7 @@ ENTRY(sys_call_table)
 	.long sys_fchmodat
 	.long sys_faccessat
 	.long sys_ni_syscall /* pselect6 */
-	.long sys_ni_syscall /* sys_ppoll */
+	.long sys_ppoll
 	.long sys_unshare		/* 310 */
 	.long sys_set_robust_list
 	.long sys_get_robust_list

arch/microblaze/kernel/timer.c

@@ -22,6 +22,7 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/bug.h>
 #include <asm/cpuinfo.h>
 #include <asm/setup.h>
 #include <asm/prom.h>
@@ -234,6 +235,7 @@ void __init time_init(void)
 		if (timer)
 			break;
 	}
+	BUG_ON(!timer);
 
 	timer_baseaddr = *(int *) of_get_property(timer, "reg", NULL);
 	timer_baseaddr = (unsigned long) ioremap(timer_baseaddr, PAGE_SIZE);

arch/microblaze/mm/init.c

@@ -130,13 +130,13 @@ void __init setup_memory(void)
 	 * (in case the address isn't page-aligned).
 	 */
 #ifndef CONFIG_MMU
-	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)_end)),
+	map_size = init_bootmem_node(NODE_DATA(0), PFN_UP(TOPHYS((u32)klimit)),
 					min_low_pfn, max_low_pfn);
 #else
 	map_size = init_bootmem_node(&contig_page_data,
-		PFN_UP(TOPHYS((u32)_end)), min_low_pfn, max_low_pfn);
+		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)_end)) << PAGE_SHIFT, map_size);
+	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);

arch/mips/include/asm/page.h

@@ -32,10 +32,12 @@
 #define PAGE_SIZE	(1UL << PAGE_SHIFT)
 #define PAGE_MASK       (~((1 << PAGE_SHIFT) - 1))
 
+#ifdef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT	(PAGE_SHIFT + PAGE_SHIFT - 3)
 #define HPAGE_SIZE	((1UL) << HPAGE_SHIFT)
 #define HPAGE_MASK	(~(HPAGE_SIZE - 1))
 #define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#endif /* CONFIG_HUGETLB_PAGE */
 
 #ifndef __ASSEMBLY__
 

arch/sh/boards/board-ap325rxa.c

@@ -547,7 +547,7 @@ static int __init ap325rxa_devices_setup(void)
 	return platform_add_devices(ap325rxa_devices,
 				ARRAY_SIZE(ap325rxa_devices));
 }
-device_initcall(ap325rxa_devices_setup);
+arch_initcall(ap325rxa_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int ap325rxa_mode_pins(void)

arch/sh/boards/mach-migor/setup.c

@@ -608,7 +608,7 @@ static int __init migor_devices_setup(void)
 
 	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
 }
-__initcall(migor_devices_setup);
+arch_initcall(migor_devices_setup);
 
 /* Return the board specific boot mode pin configuration */
 static int migor_mode_pins(void)

arch/sh/boards/mach-se/7724/setup.c

@@ -238,7 +238,7 @@ static struct platform_device ceu1_device = {
 	},
 };
 
-/* KEYSC */
+/* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
 	.scan_timing = 10,
@@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = {
 
 static struct resource keysc_resources[] = {
 	[0] = {
-		.start  = 0x1a204000,
-		.end    = 0x1a20400f,
+		.name	= "KEYSC",
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
 		.flags  = IORESOURCE_MEM,
 	},
 	[1] = {
-		.start  = IRQ0_KEY,
+		.start  = 79,
 		.flags  = IORESOURCE_IRQ,
 	},
 };

arch/sh/kernel/cpu/sh2/setup-sh7619.c

@@ -187,7 +187,7 @@ static int __init sh7619_devices_setup(void)
 	return platform_add_devices(sh7619_devices,
 				    ARRAY_SIZE(sh7619_devices));
 }
-__initcall(sh7619_devices_setup);
+arch_initcall(sh7619_devices_setup);
 
 void __init plat_irq_setup(void)
 {

arch/sh/kernel/cpu/sh2a/setup-mxg.c

@@ -238,7 +238,7 @@ static int __init mxg_devices_setup(void)
 	return platform_add_devices(mxg_devices,
 				    ARRAY_SIZE(mxg_devices));
 }
-__initcall(mxg_devices_setup);
+arch_initcall(mxg_devices_setup);
 
 void __init plat_irq_setup(void)
 {

arch/sh/kernel/cpu/sh2a/setup-sh7201.c

@@ -357,7 +357,7 @@ static int __init sh7201_devices_setup(void)
 	return platform_add_devices(sh7201_devices,
 				    ARRAY_SIZE(sh7201_devices));
 }
-__initcall(sh7201_devices_setup);
+arch_initcall(sh7201_devices_setup);
 
 void __init plat_irq_setup(void)
 {

arch/sh/kernel/cpu/sh2a/setup-sh7203.c

@@ -367,7 +367,7 @@ static int __init sh7203_devices_setup(void)
 	return platform_add_devices(sh7203_devices,
 				    ARRAY_SIZE(sh7203_devices));
 }
-__initcall(sh7203_devices_setup);
+arch_initcall(sh7203_devices_setup);
 
 void __init plat_irq_setup(void)
 {

arch/sh/kernel/cpu/sh2a/setup-sh7206.c

@@ -338,7 +338,7 @@ static int __init sh7206_devices_setup(void)
 	return platform_add_devices(sh7206_devices,
 				    ARRAY_SIZE(sh7206_devices));
 }
-__initcall(sh7206_devices_setup);
+arch_initcall(sh7206_devices_setup);
 
 void __init plat_irq_setup(void)
 {

arch/sh/kernel/cpu/sh3/setup-sh7705.c

@@ -222,7 +222,7 @@ static int __init sh7705_devices_setup(void)
 	return platform_add_devices(sh7705_devices,
 				    ARRAY_SIZE(sh7705_devices));
 }
-__initcall(sh7705_devices_setup);
+arch_initcall(sh7705_devices_setup);
 
 static struct platform_device *sh7705_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh3/setup-sh770x.c

@@ -250,7 +250,7 @@ static int __init sh770x_devices_setup(void)
 	return platform_add_devices(sh770x_devices,
 		ARRAY_SIZE(sh770x_devices));
 }
-__initcall(sh770x_devices_setup);
+arch_initcall(sh770x_devices_setup);
 
 static struct platform_device *sh770x_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh3/setup-sh7710.c

@@ -226,7 +226,7 @@ static int __init sh7710_devices_setup(void)
 	return platform_add_devices(sh7710_devices,
 				    ARRAY_SIZE(sh7710_devices));
 }
-__initcall(sh7710_devices_setup);
+arch_initcall(sh7710_devices_setup);
 
 static struct platform_device *sh7710_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh3/setup-sh7720.c

@@ -388,7 +388,7 @@ static int __init sh7720_devices_setup(void)
 	return platform_add_devices(sh7720_devices,
 				    ARRAY_SIZE(sh7720_devices));
 }
-__initcall(sh7720_devices_setup);
+arch_initcall(sh7720_devices_setup);
 
 static struct platform_device *sh7720_early_devices[] __initdata = {
 	&cmt0_device,

arch/sh/kernel/cpu/sh4/setup-sh4-202.c

@@ -138,7 +138,7 @@ static int __init sh4202_devices_setup(void)
 	return platform_add_devices(sh4202_devices,
 				    ARRAY_SIZE(sh4202_devices));
 }
-__initcall(sh4202_devices_setup);
+arch_initcall(sh4202_devices_setup);
 
 static struct platform_device *sh4202_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh4/setup-sh7750.c

@@ -239,7 +239,7 @@ static int __init sh7750_devices_setup(void)
 	return platform_add_devices(sh7750_devices,
 				    ARRAY_SIZE(sh7750_devices));
 }
-__initcall(sh7750_devices_setup);
+arch_initcall(sh7750_devices_setup);
 
 static struct platform_device *sh7750_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh4/setup-sh7760.c

@@ -265,7 +265,7 @@ static int __init sh7760_devices_setup(void)
 	return platform_add_devices(sh7760_devices,
 				    ARRAY_SIZE(sh7760_devices));
 }
-__initcall(sh7760_devices_setup);
+arch_initcall(sh7760_devices_setup);
 
 static struct platform_device *sh7760_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh4a/setup-sh7343.c

@@ -325,7 +325,7 @@ static int __init sh7343_devices_setup(void)
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
-__initcall(sh7343_devices_setup);
+arch_initcall(sh7343_devices_setup);
 
 static struct platform_device *sh7343_early_devices[] __initdata = {
 	&cmt_device,

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -318,7 +318,7 @@ static int __init sh7366_devices_setup(void)
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
-__initcall(sh7366_devices_setup);
+arch_initcall(sh7366_devices_setup);
 
 static struct platform_device *sh7366_early_devices[] __initdata = {
 	&cmt_device,

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

@@ -359,7 +359,7 @@ static int __init sh7722_devices_setup(void)
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
-__initcall(sh7722_devices_setup);
+arch_initcall(sh7722_devices_setup);
 
 static struct platform_device *sh7722_early_devices[] __initdata = {
 	&cmt_device,

arch/sh/kernel/cpu/sh4a/setup-sh7723.c

@@ -473,7 +473,7 @@ static int __init sh7723_devices_setup(void)
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
-__initcall(sh7723_devices_setup);
+arch_initcall(sh7723_devices_setup);
 
 static struct platform_device *sh7723_early_devices[] __initdata = {
 	&cmt_device,

arch/sh/kernel/cpu/sh4a/setup-sh7724.c

@@ -508,7 +508,7 @@ static int __init sh7724_devices_setup(void)
 	return platform_add_devices(sh7724_devices,
 				    ARRAY_SIZE(sh7724_devices));
 }
-device_initcall(sh7724_devices_setup);
+arch_initcall(sh7724_devices_setup);
 
 static struct platform_device *sh7724_early_devices[] __initdata = {
 	&cmt_device,

arch/sh/kernel/cpu/sh4a/setup-sh7763.c

@@ -314,7 +314,7 @@ static int __init sh7763_devices_setup(void)
 	return platform_add_devices(sh7763_devices,
 				    ARRAY_SIZE(sh7763_devices));
 }
-__initcall(sh7763_devices_setup);
+arch_initcall(sh7763_devices_setup);
 
 static struct platform_device *sh7763_early_devices[] __initdata = {
 	&tmu0_device,

arch/sh/kernel/cpu/sh4a/setup-sh7770.c

@@ -368,7 +368,7 @@ static int __init sh7770_devices_setup(void)
 	return platform_add_devices(sh7770_devices,
 				    ARRAY_SIZE(sh7770_devices));
 }
-__initcall(sh7770_devices_setup);
+arch_initcall(sh7770_devices_setup);
 
 static struct platform_device *sh7770_early_devices[] __initdata = {
 	&tmu0_device,