[SCSI] libfc:Fix for exchange/seq loopup failure when FCoE stack is used as...

[SCSI] libfc:Fix for exchange/seq loopup failure when FCoE stack is used as target and connected to windows initaitor

Problem: Linux based SW target (TCM) connected to windows initiator
was unable to satisfy write request of size > 2K.

Fix: Existing linux implememtation of FCoE stack is expecting sequence
number to match w.r.t incoming framme. When DDP is used on target in
response to write request from initiator, SW stack is notified only
when last data frame arrives and only the pakcket header of last data
frame is posted to NetRx queue of storage. When that last packet was
processed in libfc:Exchange layer, implementation was expecting
sequence number to match, but in this case sequence number which is
embedded in FC Header is assigned by windows initaitor, hence due to
sequence number mismatch post-processing which shall result into
sending RSP is not done. Enhanced the code to utilize the sequence
number of incoming last frame and process the packet so that, it will
eventually complete the write request by sending write response (RSP)
GOOD.

Notes/Dependencies: This patch is validated using windows and linux
initiator to make sure, it doesn't break anything.
Signed-off-by: NKiran Patil <kiran.patil@intel.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>

drivers/scsi/libfc/fc_exch.c

@@ -965,10 +965,32 @@ static enum fc_pf_rjt_reason fc_seq_lookup_recip(struct fc_lport *lport,
 		sp = &ep->seq;
 		if (sp->id != fh->fh_seq_id) {
 			atomic_inc(&mp->stats.seq_not_found);
-			reject = FC_RJT_SEQ_ID;	/* sequence/exch should exist */
+			if (f_ctl & FC_FC_END_SEQ) {
+				/*
+				 * Update sequence_id based on incoming last
+				 * frame of sequence exchange. This is needed
+				 * for FCoE target where DDP has been used
+				 * on target where, stack is indicated only
+				 * about last frame's (payload _header) header.
+				 * Whereas "seq_id" which is part of
+				 * frame_header is allocated by initiator
+				 * which is totally different from "seq_id"
+				 * allocated when XFER_RDY was sent by target.
+				 * To avoid false -ve which results into not
+				 * sending RSP, hence write request on other
+				 * end never finishes.
+				 */
+				spin_lock_bh(&ep->ex_lock);
+				sp->ssb_stat |= SSB_ST_RESP;
+				sp->id = fh->fh_seq_id;
+				spin_unlock_bh(&ep->ex_lock);
+			} else {
+				/* sequence/exch should exist */
+				reject = FC_RJT_SEQ_ID;
 				goto rel;
 			}
 		}
+	}
 	WARN_ON(ep != fc_seq_exch(sp));
 
 	if (f_ctl & FC_FC_SEQ_INIT)