spi_bfin: wait for tx to complete on some cs_chg paths

PBX 2 SPI devices need the nonstandard "cs change per word" mechanism.

This patch is one of three updating this driver to make the last data bits get
sent before advancing the transfer ...  in this case, before the chipselect
gets deactivated.
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/spi/spi_bfin5xx.c

@@ -294,16 +294,14 @@ static void u8_cs_chg_writer(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
 
-	/* poll for SPI completion before start */
-	while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-		cpu_relax();
-
 	while (drv_data->tx < drv_data->tx_end) {
 		cs_active(drv_data, chip);
 
 		write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
 		while (read_STAT(drv_data) & BIT_STAT_TXS)
 			cpu_relax();
+		while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
+			cpu_relax();
 
 		cs_deactive(drv_data, chip);
 
@@ -342,31 +340,20 @@ static void u8_cs_chg_reader(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
 
-	/* poll for SPI completion before start */
-	while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-		cpu_relax();
-
-	/* clear TDBR buffer before read(else it will be shifted out) */
-	write_TDBR(drv_data, 0xFFFF);
-
+	while (drv_data->rx < drv_data->rx_end) {
 		cs_active(drv_data, chip);
-	dummy_read(drv_data);
-
-	while (drv_data->rx < drv_data->rx_end - 1) {
-		cs_deactive(drv_data, chip);
+		read_RDBR(drv_data);	/* kick off */
 
 		while (!(read_STAT(drv_data) & BIT_STAT_RXS))
 			cpu_relax();
-		cs_active(drv_data, chip);
-		*(u8 *) (drv_data->rx) = read_RDBR(drv_data);
-		++drv_data->rx;
-	}
-	cs_deactive(drv_data, chip);
-
-	while (!(read_STAT(drv_data) & BIT_STAT_RXS))
+		while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
 			cpu_relax();
+
 		*(u8 *) (drv_data->rx) = read_SHAW(drv_data);
+		cs_deactive(drv_data, chip);
+
 		++drv_data->rx;
+	}
 }
 
 static void u8_duplex(struct driver_data *drv_data)
@@ -392,15 +379,12 @@ static void u8_cs_chg_duplex(struct driver_data *drv_data)
 {
 	struct chip_data *chip = drv_data->cur_chip;
 
-	/* poll for SPI completion before start */
-	while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
-		cpu_relax();
-
 	while (drv_data->rx < drv_data->rx_end) {
 		cs_active(drv_data, chip);
 
 		write_TDBR(drv_data, (*(u8 *) (drv_data->tx)));
-		while (read_STAT(drv_data) & BIT_STAT_TXS)
+
+		while (!(read_STAT(drv_data) & BIT_STAT_SPIF))
 			cpu_relax();
 		while (!(read_STAT(drv_data) & BIT_STAT_RXS))
 			cpu_relax();