提交 e115b7ec 编写于 作者: F Felix Fietkau 提交者: John W. Linville

ath9k_hw: increase ACK timeout for half/quarter channels

For some reason the MAC timing is a bit off when waiting for ACKs, so add
some extra delay to the ACK timeout values. Significantly reduces the
number of retransmissions in my tests.
Also disable the 2.4 GHz ACK timeout workaround in half/quarter mode, it
is not required there.
Signed-off-by: NFelix Fietkau <nbd@openwrt.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 e88e4861
......@@ -1020,7 +1020,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
struct ath_common *common = ath9k_hw_common(ah);
struct ieee80211_conf *conf = &common->hw->conf;
const struct ath9k_channel *chan = ah->curchan;
int acktimeout, ctstimeout;
int acktimeout, ctstimeout, ack_offset = 0;
int slottime;
int sifstime;
int rx_lat = 0, tx_lat = 0, eifs = 0;
......@@ -1054,6 +1054,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
tx_lat += 11;
sifstime *= 2;
ack_offset = 16;
slottime = 13;
} else if (IS_CHAN_QUARTER_RATE(chan)) {
eifs = 340;
......@@ -1063,6 +1064,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
tx_lat += 22;
sifstime *= 4;
ack_offset = 32;
slottime = 21;
} else {
if (AR_SREV_9287(ah) && AR_SREV_9287_13_OR_LATER(ah)) {
......@@ -1080,7 +1082,7 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
}
/* As defined by IEEE 802.11-2007 17.3.8.6 */
acktimeout = slottime + sifstime + 3 * ah->coverage_class;
acktimeout = slottime + sifstime + 3 * ah->coverage_class + ack_offset;
ctstimeout = acktimeout;
/*
......@@ -1090,7 +1092,8 @@ void ath9k_hw_init_global_settings(struct ath_hw *ah)
* BA frames in some implementations, but it has been found to fix ACK
* timeout issues in other cases as well.
*/
if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ) {
if (conf->channel && conf->channel->band == IEEE80211_BAND_2GHZ &&
!IS_CHAN_HALF_RATE(chan) && !IS_CHAN_QUARTER_RATE(chan)) {
acktimeout += 64 - sifstime - ah->slottime;
ctstimeout += 48 - sifstime - ah->slottime;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册